home *** CD-ROM | disk | FTP | other *** search
/ Shareware Overload / ShartewareOverload.cdr / busi / pc_area.zip / AC.DOC next >
Text File  |  1990-02-21  |  41KB  |  1,255 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  
  12.  
  13.  
  14.  
  15.  
  16.  
  17.  
  18.  
  19.  
  20.                                   PC-AREACODE 
  21.                                  User's Manual 
  22.                                   Version 2.1 
  23.  
  24.  
  25.  
  26.                               Left Coast Software 
  27.                                 P.O. Box 160601 
  28.                             Cupertino, CA 95016-0601 
  29.                                  (408) 996-3130
  30.  
  31.  
  32.  
  33.  
  34.                                 February 19, 1990
  35.  
  36.  
  37.  
  38.  
  39.  
  40.  
  41.                       Copyright 1990 Left Coast Software. 
  42.                               All rights reserved. 
  43.  
  44.  
  45.  
  46.  
  47.  
  48.  
  49.  
  50.  
  51.  
  52.  
  53.  
  54.  
  55.  
  56.                                    DISCLAIMER 
  57.  
  58.       Bell Communications Research establishes areacodes for the United 
  59.       States.  Left Coast Software is not affiliated in any way with Bell 
  60.       Communications Research, AT&T or any other telephone company.   
  61.  
  62.  
  63.  
  64.  
  65.  
  66.  
  67.  
  68.  
  69.  
  70.  
  71.  
  72.  
  73.  
  74.  
  75.                              SOFTWARE LICENSE AGREEMENT 
  76.  
  77.       PC-Areacode is distributed as a shareware program.  It is NOT a
  78.       public domain program!  However, we encourage you to copy the program
  79.       for trial purposes.  The program, the documentation, and all of the 
  80.       data files can be freely copied and shared to allow others to try
  81.       PC-Areacode.  You may upload this program and all associated files to
  82.       any bulletin board system (BBS) or on-line computer service.  You may
  83.       not charge more than $10 to distribute PC-Areacode in any form.   
  84.  
  85.       If you decide to use PC-Areacode, you must register your copy.  If
  86.       you do not register your copy, you are not authorized to use the
  87.       program beyond an initial evaluation period of thirty (30) days.
  88.  
  89.       By registering, Left Coast Software grants you a license to use the
  90.       copyrighted computer program PC-Areacode on a single computer,
  91.       subject to the terms and conditions of this license.  You agree not
  92.       to (a) modify, disassemble, or decompile the program or (b) use this
  93.       program on more than one terminal of a network, on a multi-user
  94.       computer, on a time-sharing system, on a service bureau, or on any
  95.       other system on which the program could be used (other than for trial
  96.       purposes) by more than one person at a time.  
  97.  
  98.       The registration fee for PC-Areacode is $15.  When you register, you
  99.       receive the most recent version of the program and the data files and
  100.       will be placed on our mailing list to receive upgrade information. 
  101.       To register, send your checks to:
  102.  
  103.                                LEFT COAST SOFTWARE
  104.                                  P.O. BOX 160601
  105.                             CUPERTINO, CA 95016-0601
  106.                                  (408) 996-3130
  107.  
  108.       Users located outside the U.S. please send international money orders
  109.       denominated in U.S. dollars.  You may also register or order by
  110.       phone.  We accept VISA and MasterCard.  A registration/order form is
  111.       included at the end of this manual.
  112.  
  113.       THE PROGRAM ON THIS DISKETTE IS PROVIDED "AS IS".  LEFT COAST 
  114.       SOFTWARE DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, AS TO 
  115.       THE PROGRAM OR ITS PERFORMANCE OR QUALITY, INCLUDING BUT NOT LIMITED 
  116.       TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  117.       PURPOSE.  IN NO EVENT WILL LEFT COAST SOFTWARE BE LIABLE FOR ANY 
  118.       DAMAGES, INCLUDING WITHOUT LIMITATION DIRECT, INDIRECT, INCIDENTAL, 
  119.       SPECIAL OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, 
  120.       RESULTING FROM THE USE OF OR INABILITY TO USE THE PROGRAM. 
  121.  
  122.  
  123.  
  124.  
  125.  
  126.  
  127.  
  128.  
  129.  
  130.  
  131.  
  132.  
  133.  
  134.  
  135.  
  136.  
  137.  
  138.  
  139.                            PC-AREACODE USER'S MANUAL 
  140.  
  141.                                TABLE OF CONTENTS 
  142.  
  143.  
  144.        INTRODUCTION.............................................. 1
  145.           SYSTEM REQUIREMENTS.................................... 1 
  146.           DATA FILES............................................. 1
  147.       GETTING STARTED............................................ 2
  148.           FILES ON THE DISTRIBUTION DISKETTE..................... 2
  149.       RUNNING PC-AREACODE AS A MEMORY RESIDENT PROGRAM........... 3
  150.           REMOVING PC-AREACODE FROM MEMORY....................... 3
  151.           COMPATIBILITY.......................................... 3
  152.       CUSTOMIZING PC-AREACODE.................................... 5
  153.           CHANGING THE HOT KEY................................... 5
  154.       USING PC-AREACODE.......................................... 6
  155.           BROWSE MODE............................................ 6
  156.           DIRECT ENTRY MODE...................................... 7
  157.           INSERTING AREACODES INTO OTHER PROGRAMS................ 8
  158.       ODDS & ENDS................................................10
  159.           DATA FILE UPGRADES.....................................10
  160.           DUPLICATE CITY NAMES...................................10
  161.           ABBREVIATIONS..........................................10
  162.           CANADIAN CITY NAMES....................................12
  163.       CUSTOMER SERVICE...........................................13
  164.       OTHER LEFT COAST PROGRAMS..................................14
  165.           EXCHEQUER..............................................14
  166.           MANDELBROT MAGIC.......................................15
  167.       ORDER/REGISTRATION FORM....................................16
  168.  
  169.  
  170.  
  171.  
  172.  
  173.  
  174.  
  175.  
  176.  
  177.  
  178.  
  179.  
  180.  
  181.  
  182.  
  183.  
  184.  
  185.  
  186.  
  187.  
  188.  
  189.  
  190.  
  191.  
  192.  
  193.  
  194.  
  195.  
  196.  
  197.  
  198.  
  199.  
  200.  
  201.  
  202.  
  203.  
  204.  
  205.                                   INTRODUCTION 
  206.  
  207.       PC-Areacode is an easy-to-use but extremely useful program which can
  208.       find the areacode for virtually any city or town in the U.S. or
  209.       Canada.  In addition, it can find the areacode or international
  210.       calling code for many countries.  Once you find an areacode, you can
  211.       insert that information into another application, such as a database
  212.       program just by pressing a key.  With PC-Areacode, you can stop
  213.       thumbing through telephone books or calling directory assistance just
  214.       to find out an areacode. 
  215.  
  216.       PC-Areacode's database contains more than 18,500 listings for cities
  217.       and towns in the U.S. and Canada.  This database also contains the
  218.       areacodes for many colleges and universities.  
  219.  
  220.       PC-Areacode can find any code in its database in less than two 
  221.       seconds when running on a 4.77 Mhz PC with a single floppy disk.  If 
  222.       you have a hard disk, PC-Areacode finds the areacode almost
  223.       instantaneously.  The program runs on any IBM PC-compatible computer
  224.       running DOS Version 2.0 or higher and can be used on systems with
  225.       either a hard disk or a single floppy disk.  It can be used either as
  226.       a standalone program or as a memory-resident utility. 
  227.  
  228.       SYSTEM REQUIREMENTS 
  229.  
  230.       PC-Areacode will run on any IBM PC, XT, AT or PS/2 compatible 
  231.       computer running MS-DOS or PC-DOS Version 2.0 or higher.  It works 
  232.       with any video adapter.  PC-Areacode requires approximately 43 K of
  233.       RAM.  PC-Areacode can be operated on a system with just one
  234.       floppy-disk drive.  
  235.  
  236.       DATA FILES
  237.  
  238.       There are two complete sets of data files for PC-Areacode.  The
  239.       "small" data files contain 63 listings for all states with more than
  240.       one areacode or approximately 2,000 listings total.  The small files
  241.       all have the extension *.DAT on the distribution diskette.
  242.  
  243.       The "large" data files provide an extremely comprehensive database of
  244.       areacode information and contain over 18,500 listings.  The large
  245.       data files have been compressed into a single file BIGFILES.ZIP on
  246.       the distribution diskette.  Before using the large data files, you
  247.       must uncompress them using PKWARE's data compression programs (PKZIP,
  248.       PKUNZIP, etc).  The large data files all have the extension *.BIG.
  249.  
  250.  
  251.  
  252.  
  253.  
  254.  
  255.  
  256.  
  257.  
  258.  
  259.  
  260.  
  261.  
  262.  
  263.                                          1
  264.  
  265.  
  266.  
  267.  
  268.  
  269.  
  270.  
  271.                                 GETTING STARTED 
  272.  
  273.       PC-Areacode comes ready to run on a single floppy disk.  We strongly
  274.       encourage you to make backup copies of PC-Areacode before you first
  275.       use the program to guard against accidental erasure of the program. 
  276.       To install the program, simply copy all of the program and data files
  277.       to the disk or directory you will be using for the program.  
  278.  
  279.       To run PC-Areacode, move to the drive and directory containing the 
  280.       file AC.EXE and type "AC", then press <Return>.  To run PC-Areacode
  281.       as a memory resident program, type "AC M" and  press <Return>.  
  282.  
  283.       If you want to be able to start PC-Areacode from any directory, you
  284.       must modify the PATH statement in your AUTOEXEC.BAT file to include
  285.       the directory containing PC-Areacode (See your DOS manual).  YOU MUST
  286.       ALSO RUN THE SETUP PROGRAM (ACSETUP.EXE) TO TELL PC-AREACODE WHERE
  287.       TO FIND ITS DATA FILES.  
  288.  
  289.       FILES ON THE DISTRIBUTION DISKETTES
  290.  
  291.       The distribution diskettes contain the following files: 
  292.  
  293.               AC.DOC               User's Manual  
  294.  
  295.               AC.EXE               PC-Areacode program 
  296.  
  297.               ACSETUP.EXE          Setup program for PC-Areacode 
  298.  
  299.               GO.BAT               Batch file to start 
  300.  
  301.               PRINTDOC.BAT         Batch file to print the documentation 
  302.  
  303.               PC_AC.CFG            Configuration file for PC-Areacode
  304.  
  305.               *.DAT                Small data files (33)
  306.  
  307.               TX_NEW.DAT           Updated small data file for Texas
  308.  
  309.               NJ_NEW.DAT           Updated small data file for New Jersey
  310.  
  311.               BIGFILES.ZIP         Compressed large data files
  312.  
  313.       You do not need to copy all of the data files to the working
  314.       disk/directory if you need to conserve disk space.  If PC-Areacode
  315.       cannot find a data file, it will simply display an error message. 
  316.       However, PC-Areacode must be able to find the files SCODES.DAT and
  317.       PC_AC.CFG.  If it cannot find these files, the program will terminate
  318.       and (if running as a memory resident program) return you to your
  319.       current program.  
  320.  
  321.       If you want to use the large data files (only registered users
  322.       receive these), simply rename the *.BIG files as *.DAT and copy them
  323.       to your working directory.  Be sure to make backup copies of the
  324.       original *.DAT files first!
  325.  
  326.  
  327.  
  328.  
  329.                                          2
  330.  
  331.  
  332.  
  333.  
  334.  
  335.  
  336.  
  337.  
  338.                 RUNNING PC-AREACODE AS A MEMORY RESIDENT PROGRAM 
  339.  
  340.       PC-Areacode can be run as either a memory-resident program (TSR) or
  341.       as a standalone.  When run as a TSR, PC-Areacode is always available
  342.       to you and can be activated just by pressing Ctrl-Alt-A. 
  343.       Furthermore, you can easily insert an areacode into another
  344.       application by pressing Alt-Insert.  (These key combinations can be
  345.       changed using the Setup Program).  When running in memory-resident
  346.       mode, PC-Areacode uses approximately 45 K of RAM. 
  347.  
  348.       To load PC-Areacode into memory, type "AC M" at the DOS prompt and 
  349.       press <Return>.  There must be a space between "AC" and "M" but it 
  350.       does not matter if you use upper or lowercase letters. 
  351.  
  352.       Once loaded, PC-Areacode is available for use at virtually any time. 
  353.       Pressing Ctrl-Alt-A will "pop up" PC-Areacode from within any program
  354.       you are currently using.  However, it will not pop up if your
  355.       computer is in graphics mode.  When you are done with PC-Areacode,
  356.       press ESC to return to your program. 
  357.  
  358.       If you want to have PC-Areacode available to you whenever you use 
  359.       your computer, add the lines: 
  360.  
  361.            CD \AREACODE     (or the name of the directory AC.EXE is in)
  362.            AC M 
  363.  
  364.       to your AUTOEXEC.BAT file.  See your DOS manual for more information.
  365.  
  366.       REMOVING PC-AREACODE FROM MEMORY
  367.  
  368.       If you want to remove PC-Areacode from memory, press Ctrl-Alt-A to
  369.       activate the program, then press Alt-U twice in succession. If you
  370.       have not loaded any other TSRs after PC-Areacode, it will stop itself
  371.       and free the memory it uses for other purposes.  If it is unable to
  372.       free the memory, you will hear a beep when you press Alt-U twice and
  373.       PC-Areacode will remain active. 
  374.  
  375.       COMPATIBILITY
  376.  
  377.       PC-Areacode is compatible with virtually all other memory resident
  378.       programs.  However, complete compatibility with all applications and
  379.       TSRs cannot be guaranteed by any TSR.  We currently know of two
  380.       conflicts with others TSRs.
  381.  
  382.       First, PC-Areacode (like many programs) cannot be loaded safely after
  383.       Borland's Sidekick because of the way Sidekick works.  If you want
  384.       to use both Sidekick and PC-Areacode, load PC-Areacode FIRST.  If 
  385.       PC-Areacode is loaded first, both PC-Areacode and Sidekick will 
  386.       operate properly. 
  387.  
  388.       Second, PC-Areacode conflicts slightly with Lotus' Metro as well as
  389.       some relatively obscure TSRs.  PC-Areacode can be loaded either
  390.       before or after these programs.  If you load PC-Areacode after one of
  391.  
  392.  
  393.  
  394.  
  395.                                          3
  396.  
  397.  
  398.  
  399.  
  400.  
  401.  
  402.  
  403.       these programs, however, you will be prompted to press <Return>
  404.       twice while PC-Areacode is loading.  Once loaded, PC-Areacode will
  405.       work properly.
  406.  
  407.       If you experience conflicts between PC-Areacode and any TSR, do two
  408.       things.  First, try loading PC-Areacode before the other program (or
  409.       vice versa).  Second, write us a letter or call our customer service
  410.       number to tell us about the problem. 
  411.  
  412.  
  413.  
  414.  
  415.  
  416.  
  417.  
  418.  
  419.  
  420.  
  421.  
  422.  
  423.  
  424.  
  425.  
  426.  
  427.  
  428.  
  429.  
  430.  
  431.  
  432.  
  433.  
  434.  
  435.  
  436.  
  437.  
  438.  
  439.  
  440.  
  441.  
  442.  
  443.  
  444.  
  445.  
  446.  
  447.  
  448.  
  449.  
  450.  
  451.  
  452.  
  453.  
  454.  
  455.  
  456.  
  457.  
  458.  
  459.  
  460.  
  461.                                          4
  462.  
  463.  
  464.  
  465.  
  466.  
  467.  
  468.  
  469.                             CUSTOMIZING PC-AREACODE 
  470.  
  471.       PC-Areacode comes with a Setup Program (ACSETUP.EXE) which can modify
  472.       the program's configuration file (PC_AC.CFG).  To run this program,
  473.       type "ACSETUP" and press <Return>.  ACSETUP lets you do two things: 
  474.  
  475.        1.  Tell PC-Areacode where to find its data files.  This is 
  476.            especially important if you are running PC-Areacode as a TSR.
  477.  
  478.        2.  Change the program's "hot keys", i.e. the combination of keys
  479.            which will "pop up" PC-Areacode within any of your other
  480.            programs and insert an areacode into another application.
  481.  
  482.       The Setup program is fairly simple to use.  You can move between the 
  483.       three data entry fields by pressing <Return>.  When you are satisfied
  484.       with your inputs, FIRST MOVE TO THE TOP DATA FIELD, then press F10 to
  485.       save this information to the configuration file "PC_AC.CFG".  This
  486.       file must be located in the same directory as AC.EXE. If PC_AC.CFG is
  487.       accidentally destroyed, a new version with the default values will be
  488.       created the next time you run PC-Areacode. 
  489.  
  490.       CHANGING THE HOT KEY 
  491.  
  492.       The default "hot key" for activating PC-Areacode is Ctrl-Alt-A. 
  493.       Pressing these three keys in combination will "pop up" PC-Areacode
  494.       within your program for instant use.  You can change the specific
  495.       combination of keys used to invoke PC-Areacode with the Setup
  496.       program.  The most common reason to change the hot key is because it
  497.       conflicts with some other memory resident program's hot key.  When
  498.       this happens, you may not be able to use either program unless you
  499.       change the hot key. 
  500.  
  501.       You can also change the "hot key" which is used to insert an areacode
  502.       into another program.  The default hot key for insertion is Alt-Ins.
  503.  
  504.       To change either hot key, move to the appropriate field and simply 
  505.       press the key combination you want to use.  The combination will be 
  506.       displayed so you can verify its accuracy. 
  507.  
  508.       The new hot key combination which you choose must include at least 
  509.       one of the following four keys: CTRL, ALT, Left Shift or Right Shift.
  510.       It can include any number of these four keys but it must include at 
  511.       least one.  It must also include at least one other key which can be 
  512.       a letter, a number, one of the ten (or 12) function keys, Home, End, 
  513.       PgUp, PgDn, an arrow key, etc. 
  514.  
  515.       A few specific key combinations are not acceptable.  If you enter one
  516.       of these, you will not see any change in the key combination.   
  517.  
  518.       SINCE PC-AREACODE ALLOWS YOU TO USE "F10 AND "ESC" TO ACTIVATE THE 
  519.       PROGRAM, YOU CANNOT SAVE YOUR CHANGES TO PC_AC.CFG NOR EXIT FROM THE 
  520.       SETUP PROGRAM WHILE YOU ARE ON A HOT KEY DATA ENTRY FIELD.  YOU MUST
  521.       FIRST MOVE TO THE TOP DATA FIELD BY PRESSING <RETURN>, THEN PRESS F10
  522.       TO SAVE THE CHANGES.   
  523.  
  524.  
  525.  
  526.  
  527.                                          5
  528.  
  529.  
  530.  
  531.  
  532.  
  533.  
  534.  
  535.  
  536.                                USING PC-AREACODE 
  537.  
  538.       Let's take a quick guided tour of PC-Areacode.  To run PC-Areacode as
  539.       a standalone program, move to the disk and directory containing the
  540.       program and data files, type "AC" and press <Return>.  To run
  541.       PC-Areacode as a memory resident program, type "AC M" and press
  542.       <Return>.  Pressing Ctrl-Alt-A will then "pop up" PC-Areacode.
  543.  
  544.       The main display screen lists the 63 states, provinces and 
  545.       territories of the U.S. and Canada (as well as the District of 
  546.       Columbia).  If a state has just one areacode, this code is displayed 
  547.       just to the right of the state's name.  If an asterisk appears here,
  548.       it means that there are multiple areacodes for this state.  It also
  549.       means that there is a separate data file containing the areacodes for
  550.       virtually every city in that state.  More on that later. 
  551.  
  552.       BROWSE MODE
  553.  
  554.       Let's first explore the Browse mode of PC-Areacode.  One of the 
  555.       states is always highlighted by a cursor bar; this is the selected 
  556.       state.  You can move the cursor bar around the screen by using the 
  557.       four arrow keys as well as the Home and End keys.  Pressing the Home 
  558.       key will move you to the upper left corner of the screen while the 
  559.       End key will move you to the lower right corner. 
  560.  
  561.       Move the cursor bar until "South Dakota" (or any other state with a 
  562.       single code) is highlighted, then press <Return>.  PC-Areacode 
  563.       displays the areacode for South Dakota in large block letters in the 
  564.       middle of the screen.  Press ESC to remove this display. 
  565.  
  566.       Now move the cursor bar until "California" (or any other state with 
  567.       an asterisk) is highlighted, then press <Return>.  The listing the 
  568.       states and provinces is replaced with a list of cities in California 
  569.       and their areacodes.  If you press <Return>, the areacode for the 
  570.       highlighted city will be shown in large block letters.  You can move
  571.       around the screen by pressing the following keys:
  572.  
  573.            Up Arrow       Moves the cursor bar one item in the direction of
  574.            Down Arrow     the arrow.  When the cursor bar reaches the edge,
  575.            Left Arrow     it will "wrap around" to the other edge.
  576.            Right Arrow
  577.  
  578.            Home           Moves the cursor bar to the upper left corner.
  579.  
  580.            End            Moves the cursor bar to the lower right entry.
  581.  
  582.            Ctrl-Left      Moves the cursor bar to the far left or far right
  583.            Ctrl-Right     column, respectively.
  584.  
  585.            Ctrl-PgUp      Moves the cursor bar to the top or bottom of the
  586.            Ctrl-PgDn      current column, respectively.
  587.  
  588.  
  589.  
  590.  
  591.  
  592.  
  593.                                          6
  594.  
  595.  
  596.  
  597.  
  598.  
  599.  
  600.  
  601.       Not all of the cities for a state can be shown on one display. To see
  602.       other cities within this state, press the following keys:
  603.  
  604.            PgDn           Displays following page of information.
  605.  
  606.            PgUp           Displays preceding page of information.
  607.  
  608.            Ctrl-Home      Displays first page of information in that state.
  609.  
  610.            Ctrl-End       Displays last page of information in that state.
  611.  
  612.       Press ESC to return to the main list of states and provinces.  Now 
  613.       press PgDn to display a list of the areacodes for 63 of the largest 
  614.       cities in the U.S. and Canada. 
  615.  
  616.       Press PgDn again to see a list of the international calling codes for
  617.       many foreign countries.  See your telephone book for general 
  618.       instructions on how to use these codes in your area. 
  619.  
  620.       If you press PgDn a third time, you will see the areacodes for many 
  621.       Caribbean countries.  These countries can be called directly, just as
  622.       you would call any state in the U.S.  You can move around any of
  623.       these screens using the arrow keys, Home and End.  If you press
  624.       <Return>, the areacode or international calling code for the
  625.       highlighted city or country will be displayed in large letters. 
  626.  
  627.       Return to the main screen by pressing PgDn again.  You can browse 
  628.       through these four main screens by using the PgUp and PgDn keys. 
  629.  
  630.       DIRECT ENTRY MODE
  631.  
  632.       At the bottom of the screen is a box where you can enter the name of 
  633.       a city and state, the name of just a state, or an areacode by simply 
  634.       typing it on the keyboard.  PC-Areacode is fairly smart; you can
  635.       enter either two letter state codes (e.g. "CA") or complete state
  636.       names (e.g. "California").  Also, PC-Areacode is case insensitive
  637.       (e.g. you can enter "CALIFORNIA","california","CAlifORnia", etc.). 
  638.       HOWEVER, YOU MUST ENTER A COMMA BETWEEN A CITY NAME AND THE STATE
  639.       NAME. 
  640.  
  641.       If you can't remember the two letter state code, you can look on 
  642.       PC-Areacode's main screen.  In every state or province name, two (and
  643.       only two) letters are capitalized.  On color monitors, these letters 
  644.       are yellow.  These two letters are the code for that state. 
  645.  
  646.       Let's explore Direct Entry Mode by typing "Cupertino, CA" and 
  647.       pressing <Return>.  When you press <Return>, three things happen.  
  648.       First, PC-Areacode calls up the database for California.  Next, it 
  649.       moves to the page containing "Cupertino" and highlights that entry.  
  650.       Finally, it displays the areacode for "Cupertino" in large block 
  651.       numerals.  If you press ESC, this large-scale display is removed and 
  652.       you can move around the list of California cities. 
  653.  
  654.  
  655.  
  656.  
  657.  
  658.  
  659.                                          7
  660.  
  661.  
  662.  
  663.  
  664.  
  665.  
  666.  
  667.       Now type in "Phoenix, Arizona" and press <Return>.  Since all points 
  668.       in Arizona are served by just one areacode, PC-Areacode will move to 
  669.       the main screen, highlight that state, and show you the state's code.
  670.  
  671.       Now let's assume that you make a typing error or enter the name of a 
  672.       city that is not contained in PC-Areacode's database.  Type "Bost, 
  673.       MA" and press <Return>.  PC-Areacode will move to the Massachusetts 
  674.       database but it will not show the areacode for a city.  Instead, it 
  675.       moves to the city which most closely matches the name you entered. 
  676.       Chances are that this will be the city you actually want.   
  677.  
  678.       (Note: PC-Areacode tries to match the name you entered from left to 
  679.       right.  Thus, if you were searching for "Boston, MA", it would come 
  680.       close if you typed "Bosto, MA" but not if you typed "Voston, MA".) 
  681.       Type in "Denver, CO" and hit <Return> to move to the Colorado 
  682.       database.  If you now want to find the code for Aspen, you can type 
  683.       "Aspen" without a state name and press <Return>. 
  684.  
  685.       We're almost done now.  While the Colorado listing is still visible,
  686.       type in "CA" (or any other state name or code) and press <Return>. 
  687.       If that state has just one areacode, PC-Areacode will show the main
  688.       screen, highlight that state, and show its code.  If the state uses
  689.       multiple areacodes, PC-Areacode will show you the first city in that
  690.       state's database. 
  691.  
  692.       We're on the homestretch now!  First, type "408" and press <Return>. 
  693.       If you enter a valid areacode, PC-Areacode will find the state which
  694.       uses that areacode, move to the main display (if not already there),
  695.       and place the cursor bar on that state.  You can then press <Return>
  696.       to display the code or browse through that state.  If you enter a 
  697.       number which is not a valid areacode, PC-Areacode will display the 
  698.       error message "STATE NOT FOUND.  Press any key to continue." 
  699.  
  700.       Note: Prince Edward Island and Nova Scotia both use 902. If you enter
  701.       902, PC-Areacode will display Nova Scotia.  Likewise, the areacode
  702.       '403' is used primarily for Alberta but also covers the Northwest
  703.       Territories, the Yukon Territory and a small region of Saskatchewan. 
  704.       If you enter 403, however, PC-Areacode displays Alberta.
  705.  
  706.       INSERTING AREACODES INTO OTHER PROGRAMS
  707.  
  708.       One of the primary uses of PC-Areacode is to fill in missing data in
  709.       other database applications.  If you are running PC-Areacode as a TSR,
  710.       you can pop it up over any other application by pressing Ctrl-Alt-A.
  711.       When you find the missing areacode, return to your application by
  712.       pressing ESC.  If you then press Alt-Insert, PC-Areacode will insert
  713.       the last areacode it found at the current location of the cursor.
  714.       (You can change this key combination with ACSETUP).
  715.  
  716.  
  717.       That's it!  You now know virtually everything there is to know about 
  718.       running PC-Areacode. You can exit the program by pressing ESC until 
  719.       you see the prompt "Exit PC-Areacode and return to DOS? [N]".  If you
  720.  
  721.  
  722.  
  723.  
  724.  
  725.                                          8
  726.  
  727.  
  728.  
  729.  
  730.  
  731.  
  732.  
  733.       want to quit, press "y" or "Y".  Press any other key if you do not 
  734.       want to quit.  If you are running PC-Areacode as a memory-resident 
  735.       program, pressing ESC will return you to your current program. 
  736.  
  737.  
  738.  
  739.  
  740.  
  741.  
  742.  
  743.  
  744.  
  745.  
  746.  
  747.  
  748.  
  749.  
  750.  
  751.  
  752.  
  753.  
  754.  
  755.  
  756.  
  757.  
  758.  
  759.  
  760.  
  761.  
  762.  
  763.  
  764.  
  765.  
  766.  
  767.  
  768.  
  769.  
  770.  
  771.  
  772.  
  773.  
  774.  
  775.  
  776.  
  777.  
  778.  
  779.  
  780.  
  781.  
  782.  
  783.  
  784.  
  785.  
  786.  
  787.  
  788.  
  789.  
  790.  
  791.                                          9
  792.  
  793.  
  794.  
  795.  
  796.  
  797.  
  798.  
  799.                                   ODDS & ENDS 
  800.  
  801.       DATA FILE UPGRADES
  802.  
  803.       The telephone companies occasionally add areacodes to handle growth
  804.       in a particular region.  In 1988, Florida, Massachusetts and Colorado
  805.       all added new areacodes while Illinois added a new areacode for the
  806.       Chicago area in November, 1989.  Texas is adding a new areacode in
  807.       the fall of 1990 and New Jersey will add another code in early 1991.
  808.       California is also scheduled to get a new areacode in 1991.
  809.  
  810.       Left Coast Software publishes updated data files at a nominal cost
  811.       shortly after the code boundaries are finalized.  All registered
  812.       users are notified when these files are available.  Updated versions
  813.       of the small data files can be obtained with the most recent version
  814.       of the shareware package.  
  815.  
  816.       This version of the program includes updated small data files for
  817.       both Texas and New Jersey, called TX_NEW.DAT and NJ_NEW.DAT,
  818.       respectively.  You should rename these files TX.DAT and NJ.DAT and
  819.       replace the existing data files at the appropriate time.
  820.  
  821.       DUPLICATE CITY NAMES 
  822.  
  823.       There are numerous instances of duplicate city names within a single 
  824.       state.  Pennsylvania is particularly notorious for this with as many 
  825.       as eight cities (!!!) with the same name.  
  826.  
  827.       When the duplicate cities do not share the same areacode, they each 
  828.       are listed separately with the name of the county in which they are 
  829.       located in parentheses.  Unfortunately PC-Areacode can't tell you 
  830.       which city you are trying to find, but at least you will know that 
  831.       there are several choices.  When one of the duplicate cities is much 
  832.       larger than the other(s), only the largest city is listed to avoid 
  833.       confusion.   
  834.  
  835.       ABBREVIATIONS 
  836.  
  837.       PC-Areacode recognizes the following abbreviations in city names when
  838.       they appear as the first word in the city name (all of these are
  839.       case insensitive): 
  840.  
  841.               FOR:               YOU CAN ENTER: 
  842.               --------------------------------- 
  843.  
  844.               North                 North 
  845.                                     No. 
  846.                                     N. 
  847.                                     No 
  848.                                     N 
  849.  
  850.  
  851.  
  852.  
  853.  
  854.  
  855.  
  856.  
  857.                                          10
  858.  
  859.  
  860.  
  861.  
  862.  
  863.  
  864.  
  865.               FOR:               YOU CAN ENTER: 
  866.               --------------------------------- 
  867.  
  868.               South                 South 
  869.                                     So. 
  870.                                     So 
  871.                                     S. 
  872.                                     S 
  873.  
  874.               East                  East 
  875.                                     E 
  876.                                     E. 
  877.  
  878.               West                  West 
  879.                                     W. 
  880.                                     W 
  881.  
  882.               Fort                  Fort 
  883.                                     Ft. 
  884.                                     Ft 
  885.  
  886.               Mount                 Mount  
  887.                                     Mt. 
  888.                                     Mnt. 
  889.                                     Mt 
  890.  
  891.               Point                 Point 
  892.                                     Pt. 
  893.                                     Pt 
  894.  
  895.               St.                   Saint 
  896.                                     St. 
  897.                                     St 
  898.  
  899.               (PC-Areacode actually uses the abbreviation "St." in all of 
  900.                its listings). 
  901.  
  902.       PC-Areacode tries to pack as much information on each screen as it 
  903.       can.  As a result, some city names are simply too long to fit (e.g. 
  904.       Washington Court House, Ohio) especially if they are followed by a 
  905.       county name.  In these cases, the city or county names are 
  906.       abbreviated.  Some of the abbreviations can only be described as 
  907.       creative!  We apologize if we offend anyone's sensibilities.  There 
  908.       are only a couple dozen such cities in the entire database.  No very 
  909.       large cities are abbreviated. 
  910.  
  911.       PC-Areacode also uses the following abbreviations in some of its 
  912.       listings.  It does not recognize any substitutes for these words, 
  913.       however.  Thus, you can find the areacode for Rocky Mountain National
  914.       Park in Colorado by entering "Rocky Mountain NP, CO".  Entering 
  915.       "Rocky Mountain National Park, CO" would not find an exact match. 
  916.  
  917.  
  918.  
  919.  
  920.  
  921.  
  922.  
  923.                                          11
  924.  
  925.  
  926.  
  927.  
  928.  
  929.  
  930.  
  931.               THIS ABBREVIATION                 MEANS: 
  932.               ---------------------------------------- 
  933.  
  934.               USAF       a U.S. Air Force installation 
  935.               USN             a U.S. Navy installation 
  936.               USA             a U.S. Army installation 
  937.               NM                     National Monument 
  938.               NP                         National Park 
  939.               U                             University
  940.               Coll                             College
  941.  
  942.       The names of colleges and universities in the database tend to be
  943.       heavily abbreviated because of their length.  Most of these
  944.       abbreviations are fairly intuitive and you should be able to find
  945.       them by browsing through the state files if the program doesn't find
  946.       an exact match. 
  947.  
  948.       CANADIAN CITY NAMES 
  949.  
  950.       The names of many Canadian cities are French in origin and some of 
  951.       these are hyphenated.  Unfortunately, these names often appear in the
  952.       U.S. unhyphenated.  We have chosen not to hyphenate these names, not
  953.       from ignorance or disrespect, but because it is easier and faster to
  954.       type a space than a hyphen.  Likewise, all accents over letters (e.g.
  955.       ',`, and ^) which should be included, are omitted because of the
  956.       difficulties of entering these characters properly on the PC.
  957.  
  958.  
  959.  
  960.  
  961.  
  962.  
  963.  
  964.  
  965.  
  966.  
  967.  
  968.  
  969.  
  970.  
  971.  
  972.  
  973.  
  974.  
  975.  
  976.  
  977.  
  978.  
  979.  
  980.  
  981.  
  982.  
  983.  
  984.  
  985.  
  986.  
  987.  
  988.  
  989.                                          12
  990.  
  991.  
  992.  
  993.  
  994.  
  995.  
  996.  
  997.                                CUSTOMER SERVICE 
  998.  
  999.       Left Coast provides free technical support for PC-Areacode.  If you
  1000.       require technical support, please call us at (408) 996-3130 between
  1001.       9:00 A.M. and 5:00 P.M. Pacific time (12:00 Noon to 8:00 P.M. Eastern
  1002.       time).  You may also write us at:
  1003.  
  1004.               Left Coast Software 
  1005.               P.O. Box 160601 
  1006.               Cupertino, CA 95016-0601
  1007.  
  1008.       You may also send us a message on CompuServe (71160,756).  It may
  1009.       take us a several days to respond to CompuServe messages.
  1010.  
  1011.       You may obtain the most recent version of the program from 
  1012.       CompuServe or GEnie.  New versions are uploaded to these services
  1013.       almost immediately after their release.  
  1014.  
  1015.       We thank you for supporting PC-Areacode.  If you have suggestions for
  1016.       how to improve the program, please write us.  We love hearing from
  1017.       our customers.
  1018.  
  1019.  
  1020.  
  1021.  
  1022.  
  1023.  
  1024.  
  1025.  
  1026.  
  1027.  
  1028.  
  1029.  
  1030.  
  1031.  
  1032.  
  1033.  
  1034.  
  1035.  
  1036.  
  1037.  
  1038.  
  1039.  
  1040.  
  1041.  
  1042.  
  1043.  
  1044.  
  1045.  
  1046.  
  1047.  
  1048.  
  1049.  
  1050.  
  1051.  
  1052.  
  1053.  
  1054.  
  1055.                                          13
  1056.  
  1057.  
  1058.  
  1059.  
  1060.  
  1061.  
  1062.  
  1063.                            OTHER LEFT COAST PROGRAMS 
  1064.  
  1065.       Left Coast Software also sells two other shareware programs for the
  1066.       PC -- Exchequer and Mandelbrot Magic.  To order any Left Coast
  1067.       product, call (408) 996-3130 or use the order form on the next page.
  1068.       We accept VISA and MasterCard.  
  1069.  
  1070.       EXCHEQUER (Version 2.2)
  1071.  
  1072.       Exchequer is an easy-to-use check writing and checkbook management
  1073.       program for IBM PC-compatible computers.  It is designed primarily
  1074.       for home users and small businesses wishing to automate and simplify
  1075.       the process of paying their bills.  In addition, it provides a number
  1076.       of reporting options.  For example, it allows the user to sort and
  1077.       print checkbook data by category or by payee.
  1078.  
  1079.       Exchequer provides the following features and functions:
  1080.  
  1081.       *  Exchequer pays your monthly bills with just two keystrokes!
  1082.  
  1083.       *  Exchequer's check register looks just like a regular checkbook.
  1084.  
  1085.       *  Exchequer makes balancing your checkbook easy by automatically
  1086.          finding all uncleared checks and deposits.
  1087.  
  1088.       *  Exchequer works with virtually all types of continuous-feed
  1089.          checks.  The user has complete control over the check layout.
  1090.  
  1091.       *  Exchequer supports an unlimited number of accounts.
  1092.  
  1093.       *  Exchequer's check register can store over 4000 transactions.  An
  1094.          archiving function saves the oldest transactions to a separate
  1095.          file (e.g. at year's end), thus making room for more transactions.
  1096.  
  1097.       *  Exchequer can memorize all up to 255 predefined transactions
  1098.          (checks, withdrawals, deposits, service charges, etc.)  These
  1099.          transactions can be easily recalled and used when paying bills.
  1100.  
  1101.       *  Exchequer can assign a transaction to 255 user-defined categories.
  1102.          Reporting functions allow the user to sort the check register by
  1103.          category, making tax preparation a breeze!
  1104.  
  1105.       *  Exchequer can split any transaction amount up to 10 ways and
  1106.          assign it to separate categories.
  1107.  
  1108.       *  Exchequer offers a wide variety of reports which can be sent to
  1109.          the printer, the screen or to a file.
  1110.  
  1111.       Exchequer runs on any IBM PC, XT, AT or PS/2 compatible computer
  1112.       running MS-DOS or PC-DOS Version 2.0 or higher.  It works with any
  1113.       graphics adapter.  Exchequer requires approximately 200 K of free
  1114.       memory.  Exchequer can be operated quite easily with just one
  1115.       floppy-disk drive.  The program will work with any printer which
  1116.       handles continuous-feed checks. 
  1117.  
  1118.  
  1119.  
  1120.  
  1121.                                          14
  1122.  
  1123.  
  1124.  
  1125.  
  1126.  
  1127.  
  1128.  
  1129.  
  1130.       The registration fee for Exchequer Version 2.1 is just $15.00.
  1131.  
  1132.       MANDELBROT MAGIC (Version 3.1) 
  1133.  
  1134.       Fractal geometry has been used in the past to create images and
  1135.       models of many differing subjects.  From three-dimensional pictures
  1136.       of landscapes in movies to an accurate cross section of the heart,
  1137.       fractals are at the leading edge of research in many fields.
  1138.  
  1139.       Mandelbrot Magic generates stunning color displays ("slides") of the
  1140.       Mandelbrot Set and Julia Sets, a famous group of fractals.  The
  1141.       Mandelbrot Set has been called "the most complicated object in
  1142.       mathematics."   Fractal geometry is a complicated mathematical field,
  1143.       but Mandelbrot Magic is easy to use and will create spectacular
  1144.       slides with a few simple inputs.
  1145.  
  1146.       With Mandelbrot Magic, you can create a new slide or load and view an
  1147.       existing slide from disk.  The program runs on virtually any color
  1148.       graphics adapter and supports four different color modes from CGA
  1149.       (320 x 200 x 4 colors) to VGA (640 x 480 x 16 colors), depending on
  1150.       which adapter you use.  Although the program offers three automatic
  1151.       coloring algorithms, the user has complete control over the color of
  1152.       any pixel as well as the color palette.  Several different pre-
  1153.       programmed palettes are also provided.  The program also features
  1154.       different "animation" techniques which make the slide features move.
  1155.  
  1156.       One of the unique things about fractals is that they reveal more and
  1157.       more detail the closer you get and the small-scale details are
  1158.       similar to the large-scale details.  With Mandelbrot Magic, you can
  1159.       graphically select any part of the slide to magnify.  You can "zoom"
  1160.       in on various features of the fractal and reveal more detail.  You
  1161.       can also create slideshows of up to 20 existing slides.  
  1162.  
  1163.       Generating a slide is an intensive computational task and can take
  1164.       from three to sixteen hours.  However, the program supports the use
  1165.       of an 8087 math coprocessor which will cut generation times by a
  1166.       factor of 3 to 5.  You can also stop work on a slide then resume
  1167.       generation at a later time.  In addition, you will receive a copy of
  1168.       BackMAGIC, a memory resident program that can generate slides in the
  1169.       background while you run other programs!
  1170.  
  1171.       The documentation includes a list of suggested parameters for
  1172.       interesting slides and a list of suggested readings for those who
  1173.       want to explore the theoretical foundations of fractals in detail.
  1174.  
  1175.       Mandelbrot Magic runs on any IBM PC, XT, AT or PS/2 compatible 
  1176.       computer running DOS 2.0 or higher.  It requires a CGA, MCGA, EGA or
  1177.       VGA video adapter (EGA or VGA recommended).  Mandelbrot Magic
  1178.       requires at least 200 K, 350 K and 430 K of free memory for a CGA,
  1179.       EGA and VGA equipped system, respectively.  An 8087, 80287 or 80387
  1180.       math coprocessor is recommended but not required. 
  1181.  
  1182.       The registration fee for Mandelbrot Magic Version 3.1 is just $15.00.
  1183.  
  1184.  
  1185.  
  1186.  
  1187.                                          15
  1188.  
  1189.  
  1190.  
  1191.  
  1192.  
  1193.  
  1194.  
  1195.  
  1196.                             ORDER/REGISTRATION FORM 
  1197.  
  1198.       If you want to register for PC-Areacode, simply order the appropriate
  1199.       number of copies of the program. You may also order/register by phone
  1200.       by calling (408) 996-3130.  
  1201.  
  1202.        Ship to:                          Bill to (if different): 
  1203.  
  1204.           _________________________          ___________________________ 
  1205.  
  1206.           _________________________          ___________________________ 
  1207.  
  1208.           _________________________          ___________________________ 
  1209.  
  1210.           _________________________          ___________________________ 
  1211.  
  1212.        Payment Method (please circle one):   VISA    MC    Check     COD   
  1213.  
  1214.        Credit Card Number:_________________     Expiration Date: _______ 
  1215.  
  1216.        Name on card (if different): ____________________________________ 
  1217.  
  1218.        Signature (if using credit card): _______________________________ 
  1219.  
  1220.        PLEASE SHIP ME THE FOLLOWING: 
  1221.  
  1222.        _____ copies of PC-Areacode at $15.00      = ____________________ 
  1223.  
  1224.        _____ copies of Exchequer at $15.00        = ____________________ 
  1225.  
  1226.        _____ copies of Mandelbrot Magic at $15.00 = ____________________ 
  1227.              (includes BackMAGIC)
  1228.  
  1229.        California Residents Add Sales Tax = ____________________________ 
  1230.  
  1231.             Shipping/Handling (per order)                     3.00 
  1232.  
  1233.        Add $11.00 for Federal Express       ____________________________ 
  1234.  
  1235.                                    TOTAL:   ____________________________ 
  1236.  
  1237.  
  1238.        Where did you obtain your copy of PC-Areacode (e.g. PC-SIG, a user
  1239.        group, a friend)? ________________________________________________
  1240.  
  1241.        Send form to:
  1242.                 Left Coast Software
  1243.                 P.O. Box 160601
  1244.                 Cupertino, CA 95016-0601
  1245.  
  1246.  
  1247.  
  1248.  
  1249.  
  1250.  
  1251.  
  1252.  
  1253.                                          16
  1254.  
  1255.