NEXT Without FOR Statement Syntax Error in DATA or ISAM SEEK Statement RETURN Without GOSUB Statement Out Of DATA During READ Statement Illegal Function Call--Improper or Out-of-Range Argument; Too Large String Arithmetic Overflow in Floating Point Calculation or ISAM Table Out Of Memory During File Buffer Allocation or in DGROUP Undefined Label or Line Number Subscript Out Of Range; Small Array >64K; or Wrong Number Duplicate Array/CONST Definition, Redimensioned Array, File Already Exists Division By Zero; Zero To Negative Power; -32,768 Divide or Modulo Error Statement Illegal in Direct Mode String/Numeric Type or Storage Size Mismatch or ISAM Error Out Of String Space in Memory String Expression Too Long or Complex; INPUT Has More Than 15 Variables Cannot Continue Function not Defined With DEF FN No RESUME During Error Handling RESUME Encountered And No Error Condition Exists Input/Output Device Time Out (No Response) Hardware Device Fault (Failure) FOR Without NEXT Statement Printer is Off or Out Of Paper WHILE Without WEND Statement WEND Without WHILE Statement Duplicate Statement Label Subprogram not Defined Subprogram Argument Count Mismatch With DECLARE Statement Array is not Defined Variable is Required on GET or PUT on BINARY Mode File FIELD Allocation of More Bytes Than Specified in OPEN Statement Internal Error From Compiler--Recopy Disk/Check Hardware File Name or Number is Bad or Out Of Range/not Open Requested File not Found on RUN/KILL/NAME/FILES/OPEN Statement Improper File Mode/Invalid Use Of GET/PUT/FIELD/PRINT/INPUT/OPEN Statement File Already Opened Sequentially on Output or KILL on Open File GET or PUT Executed on Record Variable When FIELD is Active Unrecoverable Device Input/Output Error File in NAME Command Already Exists GET or PUT on Record Variable Causes Record LENGTH Mismatch Against OPEN Disk or Diskette is Full (Space Exhausted) on PRINT/WRITE/CLOSE Input Past End-Of-File on INPUT # Invalid (Non-Positive) Record Number on GET/PUT Statement Invalid File Name Format in LOAD/SAVE/KILL/OPEN Statement More Files Open Than CONFIG.SYS Allows or Root Too Large on SAVE/OPEN Device Unavailable (not Online or Nonexistent) Communications Receive Buffer Overflow Disk is Write Protected or File is Locked--Permission Denied Disk not Ready (No Disk in Drive or Door is Open) Disk Hardware or Physical Media Fault Advanced Feature is Unavailable or Has Been Disabled Can't Rename File Across Drives Path/File Access Error on OPEN/RENAME/MD/CD/RD Statement Path not Found on OPEN/MD/CD/RD Statement or Output File is Read-Only Feature Has Been Removed By Compiler or Linker Option Specifications ISAM Object Name >30 Characters or Not Alphanumeric ISAM DELETEINDEX On Nonexistent Table ISAM DELETEINDEX/SETINDEX--Index Not Found ISAM Element Name Must Be Column Name; Data Doesn't Exist; Can't Be Indexed ISAM No Current Record on DELETE/RETRIEVE/UPDATE/MOVENEXT/MOVEPREVIOUS ISAM Duplicate Column Value for Unique Index; CREATEINDEX w/non-zero arg ISAM MOVELAST or SEEK on Null Index ISAM Database Needs Repair--Use REPAIR.EXE ISAM Insufficient Buffers Mach 2 or QB/Pro (DOS Non-Critical)--Invalid Function Number or Operation Mach 2 or QB/Pro (DOS Non-Critical)--File or Record not Found Mach 2 or QB/Pro (DOS Non-Critical)--Path not Found or Records not Sorted Mach 2 or QB/Pro (DOS Non-Critical)--Too Many Open Files; No Handles Left Mach 2 or QB/Pro (DOS Non-Critical)--Access Denied Mach 2 or QB/Pro (DOS Non-Critical)--Invalid Handle Mach 2 or QB/Pro (DOS Non-Critical)--Memory Control Blocks Destroyed Mach 2 or QB/Pro (DOS Non-Critical)--Insufficient Memory Mach 2 or QB/Pro (DOS Non-Critical)--Invalid Memory Block Address Mach 2 or QB/Pro (DOS Non-Critical)--Invalid Environment Mach 2 or QB/Pro (DOS Non-Critical)--Invalid Format Mach 2 or QB/Pro (DOS Non-Critical)--Invalid Access Code Mach 2 or QB/Pro (DOS Non-Critical)--Invalid Data Mach 2 or QB/Pro (DOS Non-Critical)--Invalid Drive Mach 2 or QB/Pro (DOS Non-Critical)--Attempt to Remove Current Directory Mach 2 or QB/Pro (DOS Non-Critical)--not the Same Device Mach 2 or QB/Pro (DOS Non-Critical)--No More Files Mach 2 or QB/Pro (DOS Non-Critical)--Disk is Write Protected Mach 2 or QB/Pro (DOS Non-Critical)--Unit is Unknown Mach 2 or QB/Pro (DOS Non-Critical)--Drive is not Ready Mach 2 or QB/Pro (DOS Non-Critical)--Unknown Command Mach 2 or QB/Pro (DOS Non-Critical)--Data Error (Cyclical Redundancy Check) Mach 2 or QB/Pro (DOS Non-Critical)--Bad Request Structure Length Mach 2 or QB/Pro (DOS Non-Critical)--Disk Seek Error Mach 2 or QB/Pro (DOS Non-Critical)--Unknown Media Type Mach 2 or QB/Pro (DOS Non-Critical)--Disk Sector was not Found Mach 2 or QB/Pro (DOS Non-Critical)--Printer is Out of Paper Mach 2 or QB/Pro (DOS Non-Critical)--Write Fault Mach 2 or QB/Pro (DOS Non-Critical)--Read Fault Mach 2 or QB/Pro (DOS Non-Critical)--General Failure Mach 2 or QB/Pro (DOS Non-Critical)--Sharing Violation Mach 2 or QB/Pro (DOS Non-Critical)--Lock Violation Mach 2 or QB/Pro (DOS Non-Critical)--Invalid Disk Change Mach 2 or QB/Pro (DOS Non-Critical)--File Control Block is Unavailable Mach 2 or QB/Pro (DOS Non-Critical)--Sharing Buffer Overflow Mach 2 or QB/Pro (DOS Non-Critical)--Network Request is not Supported Mach 2 or QB/Pro (DOS Non-Critical)--Remote Computer is not Listening Mach 2 or QB/Pro (DOS Non-Critical)--Duplicate Name on Network Mach 2 or QB/Pro (DOS Non-Critical)--Network Name was not Found Mach 2 or QB/Pro (DOS Non-Critical)--Network is Busy Mach 2 or QB/Pro (DOS Non-Critical)--Network Device No Longer Exists Mach 2 or QB/Pro (DOS Non-Critical)--Network BIOS Command Limit Exceeded Mach 2 or QB/Pro (DOS Non-Critical)--Network Adapter Hardware Error Mach 2 or QB/Pro (DOS Non-Critical)--Incorrect Response From Network Mach 2 or QB/Pro (DOS Non-Critical)--Unexpected Network Error Mach 2 or QB/Pro (DOS Non-Critical)--Incompatible Remote Adapter Mach 2 or QB/Pro (DOS Non-Critical)--Print Queue is Full Mach 2 or QB/Pro (DOS Non-Critical)--not Enough Space For Print File Mach 2 or QB/Pro (DOS Non-Critical)--Print File Deleted Mach 2 or QB/Pro (DOS Non-Critical)--Network Name Deleted Mach 2 or QB/Pro (DOS Non-Critical)--Access Denied Mach 2 or QB/Pro (DOS Non-Critical)--Network Device Type is Incorrect Mach 2 or QB/Pro (DOS Non-Critical)--Network Name not Found Mach 2 or QB/Pro (DOS Non-Critical)--Network Name Limit is Exceeded Mach 2 or QB/Pro (DOS Non-Critical)--Network BIOS Session Limit is Exceeded Mach 2 or QB/Pro (DOS Non-Critical)--Temporarily Paused Mach 2 or QB/Pro (DOS Non-Critical)--Network Request was not Accepted Mach 2 or QB/Pro (DOS Non-Critical)--Print/Disk Redirection Paused Mach 2 or QB/Pro (DOS Non-Critical)--File Already Exists Mach 2 or QB/Pro (DOS Non-Critical)--Cannot Make Directory Entry Mach 2 or QB/Pro (DOS Non-Critical)--Interrupt 24H Failure Mach 2 or QB/Pro (DOS Non-Critical)--Too Many Redirections Mach 2 or QB/Pro (DOS Non-Critical)--Duplicate Redirection Mach 2 or QB/Pro (DOS Non-Critical)--Invalid Password Mach 2 or QB/Pro (DOS Non-Critical)--Invalid Parameter Mach 2 or QB/Pro (DOS Non-Critical)--Network Device Fault Stay-Res--Requested Service is not Valid in TSR Mode Stay-Res--DOS is Busy so DOS Services are not Available Stay-Res--Not Enough Real DOS Memory To Become Memory-Resident Stay-Res--Unable To Become Memory Resident Stay-Res--DOS Version Earlier Than 3.0 Is Not Supported Stay-Res--MEMORY HOPELESSLY CORRUPTED !!! REBOOT NOW!!! Stay-Res--Must Be Highest Program In Memory For Successful Removal Stay-Res--Primary Hot Key is Invalid or is not Defined Stay-Res--Insufficient EMS Memory Available Stay-Res--Swap File Initialize--Bad File/Path Name or Not Enough Space Stay-Res--Unprogrammed Error on SHELL Stay-Res--Stay-Res Object Module STAYQB4.OBJ was not LINKed 1st Stay-Res--SrResidentShell or Batch Command Cannot Be Null Mach 2 or QB/Pro EMS--Internal Error in Expanded Memory Mgmt Software Mach 2 or QB/Pro EMS--Malfunction in Expanded Memory Mgmt Hardware Mach 2 or QB/Pro EMS--Invalid Expanded Memory Handle Mach 2 or QB/Pro EMS--Undefined Operation Mach 2 or QB/Pro EMS--No More Handles are Available Mach 2 or QB/Pro EMS--Error in Save or Restore of Mapping Context Mach 2 or QB/Pro EMS--No More Memory Pages are Physically Available Mach 2 or QB/Pro EMS--No More Memory Pages are Logically Available Mach 2 or QB/Pro EMS--Zero Memory Pages were Requested Mach 2 or QB/Pro EMS--Invalid EMS Page for this EMS Handle Mach 2 or QB/Pro EMS--Invalid EMS Page in Range 0-3 Mach 2 or QB/Pro EMS--Page-Mapping Hardware State Save Area is Full Mach 2 or QB/Pro EMS--Save of Map Context Failure; Context Saved Mach 2 or QB/Pro EMS--Restore of Map Context Failure; Context not Saved Mach 2 or QB/Pro EMS--Sub-Function Parameter not Defined Mach 2 or QB/Pro (DOS Critical)--Attempt to Write on Write-Protected Disk Mach 2 or QB/Pro (DOS Critical)--Unknown Unit or Window Manager not Init'd Mach 2 or QB/Pro (DOS Critical)--Drive or Device not Ready or Invalid Buffer # Mach 2 or QB/Pro (DOS Critical)--Unknown Command or Empty Buffer Mach 2 or QB/Pro (DOS Critical)--CRC Data Error or Window Buffer Order Error Mach 2 or QB/Pro (DOS Critical)--Bad Request Structure Length or Insuff Memory Mach 2 or QB/Pro (DOS Critical)--Disk Seek Error Mach 2 or QB/Pro (DOS Critical)--Unknown Media Type Mach 2 or QB/Pro (DOS Critical)--Disk Sector was not Found Mach 2 or QB/Pro (DOS Critical)--Printer is Out of Paper Mach 2 or QB/Pro (DOS Critical)--Device Write Fault or Invalid Function # Mach 2 or QB/Pro (DOS Critical)--Device Read Fault or Wrong Screen Position Mach 2 or QB/Pro (DOS Critical)--General Failure Mach 2 or QB/Pro (DOS Critical)--Invalid Disk Change
