SGI Desktop Special Edition 1.1

home *** CD-ROM | disk | FTP | other *** search

/ SGI Desktop Special Edition 1.1 / SGI Desktop Special Edition 1.1.iso / dist / mmail.idb / usr / lib / Zmail / locale / ko_KR.euc / variables.z / variables

Wrap

Text File | 1995-11-13 | 80.0 KB | 2,708 lines

# Copyright 1994 Z-Code Software, a Division of NCD. # Format of this file: # -- # variable-name (case sensitive) # flags (see note below) # default-value (omit if readonly) # number-of-values (omit if not multivalue) # value-label (omit if not multivalue) # value-description (omit if not multivalue, may be multi-line) # %% (repeat this and above two fields for number-of-values, omit otherwise) # prompt ("NULL" if inapplicable) # description (multi-line) # %% # # flags may be any -combination- of: # tty, fullscreen, gui, readonly, boolean, # string, multivalue, numeric, permanent, lite # # default-value may be any of: # "NONE" or "FALSE" (to leave unset -- "FALSE" for booleans only!) # "TRUE" (to set as boolean only) # "*" (value is supplied from environment or internally) # any string (or comma-separated list for multivalues) # a conditional (is_gui, is_shell, redirect, etc. -- booleans only!) # a ternary expression (is_gui?true:false) # # Note that the ternary conditional scheme above means that setting # a default value to a string that matches one of the conditionals # (e.g. "is_gui") is impossible. Ternary conditionals may omit the # false case, and may use other defaults as their true/false cases, # e.g. "is_gui?*" is equivalent to "*" when is_gui, otherwise empty. # An omitted false case is not the same as "NONE". Multivalues may # have a comma-separated list of ternaries. # # If a variable is boolean and string/multivalue, the first word on the # line indicates the default boolean condition and the rest of the line # indicates the value assumed when the variable is set (boolean TRUE). # "gui compose" means that if the program is running in gui mode, then # "compose" is the default value. # If the first word is NONE instead of FALSE, no value is assumed. # # If the first word is "*", the rest of the line may indicate a value to # be used when no other value can be determined. This will not override # variables that are "set" internally, but WILL override internal values # that are used as defaults for "unset" variables (e.g. DEF_PROMPT). # # NOTE: backslash-newline-newline is used below to kluge trailing spaces. Version 3.2 -- alternates tty fullscreen mac gui mswindows string NONE ╚ú╜║╞«: When you reply to messages, Z-Mail does not send a copy of the message to your login name at any of the hosts listed on the alternates list. Hosts may be specified either as a single machine name or as a UUCP path, using "!" characters to separate machine names. The symbol "*" in the alternates list matches your login name at any host. For instance, if you are bobg@zyrcon.com, then "*" means "do not reply to bobg@andrew.cmu.edu or uunet!bobg or anyone else whose ID is bobg". If the "*" is followed immediately by some name, then that name is used in place of your login ID. If you have another login name on the local or remote machine, then that login may be specified either as user@machine or by preceding the login name or a UUCP path to the login name by a "!" character, as !machine!user The leading "!" character tells Z-Mail that the path ends in a login name. Without the "!", Z-Mail will append your login name. Note that the ~#alternates~cmd#~ command changes the value of this variable. %% -- alwaysexpand tty fullscreen mac gui mswindows boolean FALSE NULL Setting alwaysexpand will cause mail address ~#aliases#~ to be expanded when they appear in the To, Cc, and Bcc fields of an outgoing message. To prevent a composition from being delivered with expanded aliases, set the ~#no_expand#~ variable after starting a composition but before sending the message. Alwaysexpand has no effect when defining new ~#aliases#~ via the ~#alias#~ Z-Script command or in the GUI and Lite interface ~#Aliases#~ dialogs. %% -- alwaysignore tty fullscreen mac gui mswindows boolean multivalue # default values: TRUE forward,include # number of multi-values in variable: 4 # list the values: forward Discard ~#ignored headers#~ when forwarding messages. %% include Discard ~#ignored headers#~ when including a message in your composition. %% pipe Discard ~#ignored headers#~ when passing a message to an external program. %% printer Discard ~#ignored headers#~ when printing messages. %% Conditions: If set with no value, the mail ~#headers#~ set by the ~#ignore~cmd#~ command are always ignored. Normally, ~#ignored headers#~ are not ignored when sending messages to the printer, or when including messages in a composition. Setting alwaysignore will ignore those ~#headers#~ even in these situations. No ~#headers#~ can be ignored during ~#update~ui#~s or when using the ~#save#~ command. This is to prevent the user from inadvertently ignoring ~#headers#~ that are required internally by Z-Mail and other mail systems. %% -- always_sort tty fullscreen mac gui mswindows boolean FALSE NULL Setting always_sort will cause the system mailbox to be sorted whenever new mail arrives there. This variable is ignored if the variable ~#sort#~ is not set. If ~#sort#~ is set, but always_sort is not set, then the system mailbox will only be sorted upon entering Z-Mail, and new mail will be added unsorted to the end of the mailbox. NOTE: If you have always_sort set, the message numbers of messages may change every time new mail arrives. If you have always_sort set, you should be very careful about performing actions on groups of messages that you specify only by message number. For example, if you issue the command: ~#pick#~ -f Fred all messages from Fred will be selected. If new mail arrives, all the messages in the folder will be renumbered, but the same messages numbers will remain selected. If you issue the command: ~#delete#~ to delete the selected messages, you may be deleting that aren't from Fred and that you haven't read yet. %% -- ask tty fullscreen gui mswindows boolean TRUE NULL Prompt for a subject when composing outgoing messages. When using the "edit headers" mode, causes an empty Subject: header line to be placed in the ~#editor~var#~ file. See also ~#edit_hdrs#~. %% -- askbcc tty fullscreen gui mswindows boolean FALSE NULL Prompt for a list of Blind Carbon Copy recipients whenever sending mail. %% -- askcc tty fullscreen gui mswindows boolean is_gui?TRUE:is_lite NULL Prompt for a list of Carbon Copy recipients whenever sending mail. When using the "edit headers" mode, causes an empty Cc: header line to be placed in the ~#editor~var#~ file. See also ~#edit_hdrs#~. %% -- attach_prune_size gui numeric gui_max=1048576 10240 Bytes: This variable specifies the cutoff point for pruning large attachments from mail messages when the Prune Large Parts toggle is on in the Save dialog. %% -- attach_types tty fullscreen mac gui mswindows string NONE File Name: This variable specifies a file where encoding keys and file types for ~#attachments#~ are defined. Your system has a default file with some of these definitions. The file named by attach_types may give alternate or additional encodings and types. The command "~#attach~cmd#~ -rehash" must be used to reload the attachment type definitions if you either change the value of ~#attach_types#~ or modify the file while Z-Mail is running. %% -- autoclear mac mswindows gui boolean FALSE NULL Erase the text area of the ~#Compose window#~ after sending a message. This is useful only if ~#autodismiss#~ is not used to remove the window. Use this if you wish to leave the ~#Compose window#~ open but you are concerned that passers-by be prevented from reading the message text on your screen. %% -- autodismiss mac lite gui mswindows multivalue # default values: print save sort templates open compose message # number of multi-values 7 # list each multi-value alias Close the Aliases dialog after mailing to an alias. %% compose Close the ~#Compose window#~ after sending or cancelling a message. %% message Close the ~#Message Display window#~ when the displayed message is ~#delete~cmd#~d, unless ~#autoprint#~ is set and another message to display can be found. Note that one of ~#show_deleted~var#~ or ~#autoprint#~ must be set in order for the ~#Message Display window#~ to remain open when the displayed message is ~#delete#~d. %% open Close the Open Folder dialog after opening a folder. %% print Close the Print Messages dialog after printing. %% save Close the Save dialog after ~#saving#~. %% templates Close the ~#Templates#~ dialog after selecting a template. %% Conditions: In GUI mode, automatically dismiss (close) selected windows after performing an operation. Setting ~#autodismiss#~ without giving any conditions is equivalent to setting all the possible conditions. If ~#autoiconify#~ is also set, it may override one or more of the conditions for ~#autodismiss#~. %% -- autodisplay gui mswindows boolean string FALSE Keywords: This variable may be set to a space- or comma-separated list of attachment type keywords. If a message is received that contains an attachment of one of the listed types, that attachment is automatically displayed when the message is read. Autodisplay is performed only in GUI mode. To display a message without automatically displaying its ~#attachments#~, type its number (and only its number) in the Command: field of the ~#Main window#~ and press return. %% -- autoedit tty fullscreen gui mswindows boolean multivalue FALSE 2 new Invoke the editor when composing new messages. %% reply Invoke the editor when replying to messages. %% Conditions: Automatically enter your editor of choice when composing outgoing messages. If set, but not to any values, the editor is always started when a composition is begun. Otherwise, the editor is started only in the specified circumstances. %% -- autoformat mac gui mswindows lite boolean multivalue # default values TRUE compose # number of options 1 # list the options compose Automatically wrap text (according to the value of wrapcolumn) in the ~#Compose window#~. %% NULL Cause text to be "word-wrapped" when lines are too long to fit in the window. For the Message Display window, text wraps at the width of the window. For the Compose window, text wraps at the column specified by ~#wrapcolumn#~ (and relieves you of needing to press RETURN at the ends of lines). If wrapcolumn is not set, the width of the Compose window is used. When composing messages, it is recommended that text wrap earlier than column 80, since 80 columns is a reasonable guess about the width of the recipient's display. (Lines longer than the width of the display are often difficult to read.) In fact, for heightened readability, many consider 72 to be the ideal value for wrapcolumn. After you compose a message, autoformat may alter it to look slightly different from what you saw on the screen. When precise line-wrapping is important, you are encouraged to manually insert newlines into the text rather than rely on the formatting characteristics of autoformat. If this variable is set, but not to any value, it behaves as if it were set to "compose". Autoformatting is not performed in Z-Mail's command-line interface. %% -- autoiconify gui mswindows multivalue # default values: NONE # number of options 3 # list the options, each separated by "%%" alias Close the Aliases dialog after mailing to an alias. %% compose Iconify the ~#Compose window#~ after sending or cancelling a message. %% message Iconify the ~#Message Display window#~ when the displayed message is ~#delete~cmd#~d, unless ~#autoprint#~ is set and another message to display can be found. Note that one of ~#show_deleted~var#~ or ~#autoprint#~ must be set in order for the ~#Message Display window#~ to remain open when the displayed message is ~#delete#~d. %% Conditions: In GUI mode, automatically iconify selected windows after performing an operation. If both ~#autodismiss#~ and ~#autoiconify#~ are set for a particular window, the window will be iconified. Setting ~#autoiconify#~ without any specific conditions is equivalent to setting all of the possible conditions. %% -- autoinclude tty fullscreen mac gui mswindows boolean FALSE NULL When replying to mail, a copy of the message being replied to is automatically inserted into your message body, indented by the string described by ~#indent_str#~. See also the ~#pre_indent_str#~ and ~#post_indent_str#~ variables. %% -- autoprint tty fullscreen mac gui mswindows boolean is_gui?TRUE:is_lite NULL Automatically display the ~#next#~ message on the list when a message is ~#delete#~d. %% -- auto_route tty fullscreen mac gui mswindows boolean string NONE Host/Path: Remove redundant UUCP hostnames when replying to messages. If set (but not to a text string), all the recipients in a message that is being replied to will be routed through the path back to the original author. If auto_route is set to a specific pathname (host names separated by `!'s), all addresses in the reply will have this route prepended before redundant hosts are removed. This variable is normally set by the system administrator if it is needed. %% -- autosave_count lite gui numeric gui_max=1000 100 Value: This variable controls how often the composition will be automatically saved to a temporary file in GUI mode. It specifies the number of keystrokes between saves. %% -- autosign tty fullscreen mac gui mswindows boolean string FALSE ~/.signature Filename: Append a signature to outgoing mail. If this variable is set, but not to a string, then the file .signature in your home directory is used. If set to a string beginning with a backslash -- \like this -- or enclosed in square braces -- [like this] -- then these strings (without the backslash or square braces) are added directly to the message instead of being treated as file names. By default, the string is interpreted as a filename, and the contents of the named file are used as the signature. A leading ~ or + character is expanded to your home or folder directory, respectively. If set to a string that starts with an exclamation point (!), the remainer of the string is interpreted as a command and run in a shell. The addresses of the message are passed to the command as arguments, and the output of the command is used as the signature. %% -- autosign2 tty fullscreen mac gui mswindows string NONE Addr:File: This alternate signature is available for special cases where a signature different than the regular ~#autosign#~ is desired. The format for this variable is: autosign2 = "address1, address2, ... : signature" where address1, address2, ... may be specific users' addresses or may have one of the forms: !hostname any user at the named host (usually your own) @domain any user in the given domain (e.g. @z-code.com) and the signature is the same as described for ~#autosign#~. Note that ~#autosign#~ must also be set in order for ~#autosign2#~ to work. If a list of addresses is given (terminated by a colon), then all recipients of the message must match the list of addresses in autosign2; otherwise, the signature in ~#autosign#~ is used instead. If all addresses match but the ~#autosign2#~ signature is empty (no signature follows the colon), then the message is not signed. %% -- autotyper tty fullscreen gui string NONE Program: Set the autotyper variable to the name of an autotyper program. An autotyper program takes the name of a file being attached to a message and returns an appropriate MIME-type name. Autotyper programs are not provided by default, but the following examples are available in $ZMAIL/bin: type-by-magic Checks that magic number of a file to determine its format. type-by-suffix Checks the suffix of a file's name to determine its format. This script does not look at a file's contents. %% -- cdpath tty fullscreen gui mswindows string NONE Path: If set to a string of pathnames separated by spaces, this variable is used in searching for a directory when the ~#cd~cmd#~ command is issued. The current directory is always searched before searching directories listed in ~#cdpath#~. %% -- child tty fullscreen gui string readonly NULL When Z-Mail creates a child UNIX process in the background, this variables holds the process-id (PID) of the child process. This variable is read-only. %% -- cmd_help tty fullscreen mac gui string permanent * Path: This variable gives the path name of the general ~#help#~ file, which is read by the ~#help#~ command. This variable is normally reset only in the system initialization files, when the default location of the ~#help#~ file has changed. If an unset is attempted, this variable is automatically restored to its default value. The value of this variable is not saved when .zmailrc is written by the ~#saveopts~cmd#~ command. %% -- complete tty fullscreen gui mswindows boolean string FALSE \E\CD Characters: The first character of the value of complete is used as the "completion character". If ~#complete#~ is set, but not to a value, the escape (ESC) character is used as the default. Completion is currently supported only for file names. The escape character is treated specially by many GUI mode window managers, so completion may not operate normally in the GUI mode unless ~#complete#~ is set to some other character. The second character of the value of ~#complete#~ is used as the completion listing character. When this character is typed, the possible completions will be printed, and Z-Mail will prompt again with the original prefix. This feature is used only in the command-line interface of Z-Mail. If ~#complete#~ is set to only a single character, completion listing is disabled; if it is set with no value, Ctrl-D is used as the default listing character. If both the completion and listing characters are the same, Z-Mail completes if possible and (in the command-line interface only) produce a listing if the completion is not unique. %% -- comp_attach_label gui mswindows singlevalue comment 5 comment Display the comment from the local attachment type database. %% content Display the content name supplied by the sender. If no content name was sent, this is the same as "filename". %% description Display the descriptive text supplied by the sender. If no description was sent, this is the same as "comment". %% filename Display the file name. %% type Display the attachment type. %% Item: This variable controls what information will be displayed below each attachment icon in the attachments area of a compose window. If this variable is not set, or if none of the other information can be found, the attachment type is displayed. %% -- compose_lines gui mswindows numeric permanent NONE 18 Lines: Sets the initial number of lines in the ~#Compose window#~ in GUI mode. Changing this variable will not affect Compose windows that are already open, but may change the size of new ~#Compose window#~s. If this variable appears to be set to 0, then a size specified in your window system defaults is being used. This variable was formerly called "msg_win". %% -- compose_panes mac gui mswindows lite multivalue folder,body,action_area,attachments,toolbar # number of multi-values in variable: 6 # list the values: toolbar The toolbar. %% folder The area that contains the text field where the current folder is specified. %% body The message body that is being edited. %% action_area The button panel where actions are displayed. %% status_bar The status bar. %% attachments The attachments icons. %% Conditions: Controls which "panes" in the Compose window are visible. Unsetting this variable turns on all the panes. To remove the address headers pane, turn on the ~#edit_hdrs#~ variable. %% -- crt tty fullscreen gui numeric permanent NONE 18 Lines: The number of lines a message must have for ~#pager~var#~ to be invoked. Used only in the command line and fullscreen interfaces. %% -- cwd tty fullscreen gui mswindows readonly string Directory: The current working directory. Files and folders that do not have full path names (beginning with a `/', `+', or `~' character) are read from or written to this directory. The value of this variable is not saved when .zmailrc is written. %% -- date_received tty fullscreen mac gui mswindows boolean FALSE NULL When message ~#headers#~ are printed, the dates and times normally shown are those when the sender sent the messages. If this variable is set, then the dates displayed are the dates when the messages were received. This also affects date ~#sorting#~ in the line and curses modes. %% -- dead tty fullscreen mac gui mswindows string * ~/dead.letter Filename: Names the file to use instead of dead.letter when saving an outgoing message that has been interrupted or that otherwise fails to be sent. Your Mail Transport Agent may also save a copy of messages that failed to deliver. Also see the variable ~#nosave#~, which allows you to turn off the saving of dead letters by Z-Mail. (This would not affect the transport agent.) %% -- deletesave tty fullscreen mac gui mswindows boolean FALSE NULL Specifies that `saved' messages should be ~#delete#~d when the folder is ~#update~ui#~d. This is the default behavior in the system mailbox, but in other folders, `saved' messages are not normally ~#delete#~d. Messages that have been preserved with the ~#preserve#~ command are not affected by ~#deletesave#~. If both ~#keepsave#~ and ~#deletesave#~ are set, only ~#keepsave#~ is used, so `saved' messages will not be ~#delete#~d. %% -- detach_dir tty fullscreen mac gui mswindows string * +detach.dir Pathname: The pathname of the directory to use for temporary files when detaching and displaying ~#attachments#~ of messages you have received. This path is used by the "~#detach~cmd#~ -display" command and when displaying ~#attachments#~ from the ~#Message Display window#~ in GUI mode. Attachment temporary files are deleted when the folder from which they were detached is ~#update~ui#~d. %% -- display_headers mac gui mswindows singlevalue standard 5 all Display all headers. %% none Do not display any headers. %% retained Display only headers that have been retained with the "retain" command. %% standard If there are any retained headers, display only those; otherwise, display all headers that have not been ignored. %% unignored Display only headers that have not been ignored with the "ignore" command. %% Condition: This variable specifies which headers will be displayed when the "display" command is used to read a message. %% -- domain_route tty fullscreen mac gui mswindows boolean string NONE Host/Path: Specifies that addresses containing a fully-qualified domain should be short-circuited to mail directly to the rightmost fully-qualified domain. If set boolean (not to a string), only short-circuiting is done. If set to a string, the address is rewritten to UUCP form and the value of the variable is prepended. This variable is normally set by the system administrator if and when it is needed. %% -- dot tty fullscreen boolean FALSE NULL Causes Z-Mail to accept "." on a line by itself to send an outgoing message. This is not used in the GUI mode. %% -- dot_forward tty fullscreen mac gui mswindows boolean TRUE NULL If you have no .forward file in your home directory, a dialog is posted each time you launch MediaMail. The dialog allows you to create a .forward file for the purpose of enabling a reassembly agent. The reassemble agent allows you to receive very large messages that have been split into pieces small enough for most mail systems to handle. Unset the dot_forward to suppress the posting of this dialog. %% -- dot_lock tty fullscreen mac gui mswindows boolean TRUE NULL Causes Z-Mail to create a lock file when ~#updating#~ the system mailbox. This is necessary if your system mail directory is NFS mounted, to ensure that Z-Mail and other programs such as the mail transport agent (MTA) are synchronized. %% -- edit_hdrs tty fullscreen gui mswindows boolean FALSE NULL Allow the ~#headers#~ of messages to be edited using your editor. When set, the "To:", "Cc:", "Subject:" lines and other ~#headers#~ appear in the same text area as the body of the message you are composing. %% -- editor tty fullscreen gui string * vi Editor: This variable is only used in GUI mode if the ~#wineditor#~ and ~#visual#~ variables are not set. The editor variable specifies the editor you prefer to use when the editing outgoing messages. Default is the value of the environment string EDITOR or the variable ~#visual#~. %% -- escape tty fullscreen gui string permanent ~ Character: The escape character to begin extended editing commands when composing outgoing messages in the line mode or fullscreen interfaces. %% -- exit_saveopts tty fullscreen gui mswindows mac boolean string # default values: true -f -g Options: When this variable is set, the saveopts command is automatically executed when you exit MediaMail, so changes you have made to your configuration are saved to your ~/.zmailrc file. The saveopts command is executed with the options specified in this variable. By default, the -f and -g options are used, which means that you will not be prompted to have the changes saved, and that GUI-specific settings such as fonts will also be saved for you. To prevent your changes from being saved automatically, unset this variable. See ~#saveopts~cmd#~ for more information. %% -- fetch_timeout tty fullscreen mac gui mswindows numeric NONE 15 Minutes: The number of minutes between mail fetches that also call the Z-Script function 'fetch_mail_hook()'. The ~#timeout#~ variable is also respected. %% -- fignore tty fullscreen gui string NONE Patterns: This variable is tested when filename completion is used (see the variable ~#complete#~ for details). The value of fignore may be a list of filename extensions (".c", ".o", etc.), a list of filename patterns containing metacharacters (*?{}[]), or a mixture of the two. Each element in the list must be separated from the others by a space. When a filename completion occurs, any filenames with the extensions listed in fignore, or matching the patterns given there, will be omitted from the completion. %% -- filelist_fmt gui string # the is_gui? here prevents the ? in the value from being interpreted. is_gui?%(.?.. [╗≤└º ╡≡╖║┼Σ╕«]%|%17f %11t %m/%d/%y %T %11s%) Format: This variable controls the format of the filename entries in the file finder dialog. The string may contain formatting characters to show information about each file. %f the filename %t the file's type, as in "[file]", "[empty]", etc. %s the file's size in bytes %m the month of the file's last-modified date %d the day of the file's last-modified date %y the year of the file's last-modified date %T the time of day of the file's last-modified date %% a literal % Any of the substitutions may take a width specification in the form of a number just after the `%'. For example, "%10f" is a field ten characters wide which contains the filename. A string of this form: %(f?plain file%) is replaced with "plain file" if the file is a plain file, and is removed otherwise. Also, a string of the form: %(f?plain file%|not plain file%) is replaced with "plain file" if the file is a plain file, or the string "not plain file" otherwise. The following conditions can be used for this construct: f the file is a plain file d the file is a directory z the file is zero size . the file is the directory ".." A string of this form: %n(text%) (where "n" is a number) specifies that the "text" inside the parentheses should be filled or truncated to exactly n characters. %% -- first_part_primary tty fullscreen mac gui mswindows boolean FALSE NULL When this variable is set, Z-Mail interprets the first body part of any multipart message as the primary body part. If this primary part is text-typed or is an embedded message, Z-Mail displays this primary part as text in the Message Display Window or via the message pager, but does NOT display any other body parts in this manner. In the graphical user interface, the primary part and all additional parts appear as icons in the Attachments area of the Message Display window; to display a part, click on its icon. In the command-line interface, the ~#detach~cmd#~ command must be used to display additional parts. When this variable is NOT set, Z-Mail displays "inline" all text and embedded message parts smaller than 10 kilobytes in size. Messages that have only a single text part are shown inline regardless of the size of the part. Note: Future versions of Z-Mail will recognize standardized message headers that define the inline behavior of message body parts. If such a header is present in a particular message and is recognized by Z-Mail, this variable will have no effect on that message. %% -- folder tty fullscreen mac gui mswindows string permanent * ~/Mail Pathname: Pathname to the directory where personal folders are kept. This path is used by various commands to expand the `+' metacharacter. `~/Mail' is the default expansion of `+'. %% -- folder_title tty fullscreen mac gui mswindows string NONE Title: In the graphical user interface, the title of each open folder is displayed in the Folder Status scrolled list below the menu bar in the ~#Main window#~, using the format specified by ~#folder_title#~. The string may contain formatting characters to show information about the status of your active folder. See the ~#prompt#~ variable for a list of the possible formatting characters. This string is also used to format the output of the ~#folder~cmd#~ command when the "-list" option is used in any interface. See also ~#main_folder_title#~. This variable was formerly called "title". %% -- fonts_db gui string ~/.zmfonts File: The ~#Fonts dialog#~ allows you to change the fonts used by various objects in the graphical user interface. You may also set the Label strings of objects as well. When you want to reuse the font settings you have made for the next time you use Z-Mail, you must save the changes to some file. This may be any file you like, but the file from which Z-Mail retrieves settings is identified by the value of ~#fonts_db#~. Therefore, you can use different schemes by saving these settings to number of different files and then setting fonts_db to any one of them for each scheme you want to use. %% -- fortunates tty fullscreen gui mswindows string NONE Users: Lists the addresses of persons who receive fortunes appended to outgoing mail when fortune is set. The format of the address list is the same as for the variable ~#autosign2#~. %% -- fortune tty fullscreen gui mswindows boolean string FALSE * Flag: If fortune is set, a random fortune is appended to the end of all outgoing mail. By default, "fortune -s" (short fortunes) is used. The ~#fortunates#~ variable can be used to control which recipients receive random fortunes and which do not. Some systems do not provide random fortunes. In this case, this variable may be set to the full pathname of a program whose standard output will be appended to the message. %% -- function_help tty fullscreen mac gui string permanent * Path: This variable gives the path name of the ~#help#~ file for functions defined within the system initialization files. The value of this variable is not saved when .zmailrc is written by the ~#saveopts~cmd#~ command. %% -- gui_help gui string permanent is_gui?*:NONE Path: Location of the ~#help#~ file for the graphical user interface mode. The value of this variable is not saved when .zmailrc is written. %% -- hangup tty fullscreen gui boolean FALSE NULL If this variable is set, Z-Mail ~#update~ui#~s all open folders when its connection to a terminal (or to the X server in GUI mode) is lost. As usual, Z-Mail attempts to load any new mail that has arrived in each folder before it ~#update~ui#~s that folder. CAUTION: In the event of an error, Z-Mail cannot request that the user confirm any action, because user input is disabled by the loss of the connection. It thus is not possible for Z-Mail to guarantee that ~#update~ui#~ on hangup is non-destructive. If ~#hangup#~ is not set, Z-Mail exits on lost connection and leaves a temporary copy of each writable folder in the ~#tmpdir#~ directory (in your home directory if ~#tmpdir#~ is not set). %% -- hidden gui mswindows multivalue NONE # number of multi-values in variable: 8 # list the values: deleted Hide deleted messages %% forwarded Hide forwarded messages %% new Hide new messages %% old Hide old messages %% preserved Hide ~#preserve#~d messages %% replied Hide messages that have been replied to %% saved Hide saved messages %% unread Hide unread messages %% Types: This variable specifies which types of messages should be hidden from the ~#headers#~ list in the ~#Main window#~. By default, only ~#delete#~d messages are hidden, unless the ~#show_deleted#~ variable is set, in which case nothing is hidden. If this variable is set, but does not have any values, then all types of messages are displayed. %% -- history tty fullscreen numeric gui_max=1000 NONE Number: This variable is set to the number of commands the shell interface will remember. It is just like the history variable used in `csh'. %% -- hold tty fullscreen mac gui mswindows boolean TRUE NULL Normally, on termination of Z-Mail, messages that have been read in the system mailbox are saved in your personal mailbox. Setting ~#hold#~ prevents this from happening, so the messages remain in the system mailbox to which they are delivered. %% -- home tty fullscreen gui mswindows string * Directory: Names your home directory. You should not need to change this. The value of this variable is not saved when .zmailrc is written. %% -- hostname tty fullscreen gui mswindows string * Hostname: The name of your machine. This is set automatically from the list of hostnames in your operating system. You should not need to change this, unless the first name in the list is not the preferred name for use in your return address on outgoing messages. In that event, you may wish to change the order of the names. The value of this variable is not saved when .zmailrc is written. %% -- i18n_read_mailbox tty fullscreen gui string /usr/sbin/isotoeuc Command: The command in this variable is run whenever Z-Mail reads the mail spool to process new mail. New messages which have arrived since the last mail check are supplied to the command's standard input, and Z-Mail expects the message to appear on the commands standard output. The command specified in i18_read_mailbox must not affect the headers of the messages that are passed through it. Modifying this variable after Z-Mail starts is not recommended. This variable, along with ~#i18n_mail_transport#~ and ~#i18n_write_mailbox#~, is intended for use in Asian-language environments where the encoding format used for message transport differs from that used for message storage. %% -- i18n_write_mailbox tty fullscreen gui string /usr/sbin/euctoiso Command: The command in this variable is run whenever Z-Mail writes messages to the mail spool. Messages that Z-Mail wants to write to the spool are supplied to the command's standard input, and Z-Mail expects the messages to appear on the commands standard output. The modified messages are then written to the mail spool. The command specified in i18_write_mailbox must not affect the headers of the messages that are passed through it. Modifying this variable after Z-Mail starts is not recommended. This variable, along with ~#i18n_mail_transport#~ and ~#i18n_read_mailbox#~, is intended for use in Asian-language environments where the encoding format used for message transport differs from that used for message storage. %% -- i18n_mail_transport tty fullscreen gui string /usr/sbin/euctoiso Command: The command in this variable is run whenever Z-Mail sends a message via the mail transport agent (MTA). The message is supplied on the command's standard input, and the command's output is passed to the MTA. The command specified in i18_mail_transport must not affect the headers of the messages that are passed through it. Modifying this variable after Z-Mail starts is not recommended. This variable, along with ~#i18n_write_mailbox#~ and ~#i18n_read_mailbox#~, is intended for use in Asian-language environments where the encoding format used for message transport differs from that used for message storage. %% -- ignore_bang tty fullscreen boolean FALSE NULL Ignore `!' as a history reference. Note that this severely limits use of the ~#cmd~cmd#~ facility, which depends upon history references for argument substitutions. %% -- ignoreeof tty fullscreen boolean string NONE Command: Ignores Ctrl-D as a command to ~#exit#~. If set to a string, that string is executed as a command when Ctrl-D is typed. This does not apply in the GUI mode. %% -- indent_str tty fullscreen mac gui mswindows string >\ String: When including messages into the text of a letter you are editing, each line of the included messages is preceded by the value of ~#indent_str#~. If this is not set, the message body is indented by the string "> ". See also the ~#pre_indent_str#~ and ~#post_indent_str#~ variables. %% -- index_dir tty fullscreen mac gui mswindows string * +index.dir Pathname: The pathname of the directory where external folder index files are to be kept. This path is used by "~#update~cmd#~ -external" (and other commands) to create the external index file for a folder. If a complete pathname is not given, the name of the folder directory (abbreviated as "+" (plus), see the ~#folder~var#~ variable) is prepended. If index_dir is not set or is an empty string, then the directory "+index.dir" is used for external index files. The name of the index file within the index directory is the same as the name of the folder. If the index directory and the directory containing the folder are the same (e.g. index_dir is set to "+") then the index file name is the folder name with ".ix" appended. On systems with file name length limits, the folder name is truncated before appending ".ix". Index files can be used to save the state of a read-only folder or to "checkpoint" a writable folder. An index is created automatically if you ~#update~ui#~ a folder when you do not have permission to write to the folder file itself. For writable folders, an index may be created within the folder file, so an external index is not normally used. However, "~#update~cmd#~ -external" may be used to create an external index as a checkpoint. See also the ~#index_size#~ variable. External index files are removed by ~#rmfolder#~ -x foldername", or when the folder itself is removed by "~#rmfolder#~ foldername", or (for writable folders only) when all messages have been ~#delete#~d and the folder is ~#update~ui#~d. %% -- index_size tty fullscreen mac gui mswindows boolean numeric FALSE Size to Index: The size (in tens of messages) that a ~#folder#~ must reach before an index of the folder is automatically created. For example, a value of 10 (ten) would cause an index to automatically be created for any folder of 100 (one hundred) or more messages. Note that an index is created only when a folder is ~#update~ui#~d. If a folder is opened and closed without ~#update~ui#~, no index will be created regardless of the folder's size. Indices speed up opening of large folders by saving, in one place, the information that would otherwise have to be read separately from each message. For smaller folders, however, an index may not be desired. Set index_size according to your preference for automatic index creation. A value of 0 (zero) or boolean true (set, but no numeric value) means that all folders should be indexed, regardless of size. If index_size is not set, folders are not automatically indexed. A folder index may be either internal (stored in the folder along with the messages) or external (stored in a separate file). An internal index is used for writable folders, and an external index for read-only folders. See the variable ~#index_dir#~ for details about external folder index files. It is possible for a folder to have both an internal and an external index, in which case the internal index is used first. The external index is then referred to for status and sorting information. Note that the index of a folder opened in read-only mode (by the "-readonly" option when starting Z-Mail or when using the "folder" command) is not normally ~#update~ui#~d. However, if index_size is set and the folder is large enough, an external index file is created when the read-only folder is ~#update~ui#~d or closed, even if the file already has an index. An index is created automatically if you ~#update~ui#~ a folder when you do not have permission to write to the folder file itself. Indexing is suppressed by "~#update~cmd#~ -noindex" or "~#close~cmd#~ -noindex". %% -- intr_level gui mswindows mac numeric 50 Level: When commands or other operations take a long time to complete, Z-Mail sometimes posts a "task meter" that provides feedback about how much of the job is done. The task meter also provides the ability to stop some tasks in progress. If you start a long, time-consuming process, you can stop it with a mouse click instead of having to wait for it to complete. Rather than having the meter posted for each operation, Z-Mail tries to choose those operations that "take a long time," so you aren't bothered by excessive popping up and down of these dialogs. However, some computers are faster than others, so it is not always possible to accurately guess how long a particular task may take. Furthermore, people's expectations differ. Therefore, the value of ~#intr_level#~ can be set to some value that suits your tastes. The name indicates that this is the level at which you wish to be given the opportunity to interrupt an activity before it completes. The value is loosely based on the number of messages or size of the file that will be affected by the task. A good estimate would be about 10 messages per intr_level increment. So, for example, if intr_level were set to 5 and you were to search for a pattern from a folder with 50 or more messages, a task meter would pop up and provide feedback for how much of the task was complete. If there were less than 50 messages, the task meter would not pop up. The task meter may also pop up when ~#opening folders#~ or ~#updating#~ folders. In this case, Z-Mail's guess is based on the size of the folder in bytes rather than on the number of messages. The drawback to the task meter is that performance may drop due to the frequent redisplaying of the task window. If you desire a noticeable increase in speed, you might want to consider turning it off completely by unsetting intr_level. %% -- in_reply_to tty fullscreen mac gui mswindows boolean string NONE String: This variable may be set to a string that will complete the "In-Reply-To:" header when responding to mail. The metacharacters defined in the ~#help#~ for hdr_format may be used with in_reply_to. For example, the default in_reply_to string of %f\n\t"%s" (%d) will create an In-Reply_to: header like the following: In-Reply-To: johnr@ugl.com (John Raoul) "Help with wort pouring" (Oct 2, 1993) Note that if you place a newline (\n) character in the in_reply_to string, you must follow it with at least one space or tab (\t) character to maintain RFC 822 compliance. %% -- input tty fullscreen gui mswindows readonly string Message list: When a user-defined function appears in a pipeline, this variable is set to the list of messages that are piped to that function. If the function does not appear as part of a pipeline, ~#input#~ is not set. %% -- is_gui tty fullscreen mac mswindows gui readonly boolean NULL True if Z-Mail is running in GUI mode, false otherwise. %% -- is_lite tty fullscreen mac mswindows gui readonly boolean NULL True if Z-Mail is running in Lite mode, false otherwise. %% -- ispeller fullscreen string NONE Program: Names a program to be used for interactively ~#spell checking#~ in compositions and other editable texts. This program should expect a file name as its sole argument. The program specified by ~#ispeller#~ is given control of the terminal. %% -- keepsave tty fullscreen mac gui mswindows boolean FALSE NULL `Saved' messages are normally deleted when the system mailbox is ~#update~ui#~d. If ~#keepsave#~ is set, `saved' messages are not deleted in this way. In other folders, `saved' messages are not deleted unless ~#deletesave#~ is set. Setting ~#keepsave#~ protects `saved' messages from deletion in any folder, even if ~#deletesave#~ is also set. See also ~#hold~var#~. %% -- known_hosts tty fullscreen mac gui mswindows string NONE Host list: Used in conjunction with the variable ~#auto_route#~, this variable is set to a list of hosts, separated by spaces, tabs, and/or commas, and describes the hosts with whom you know your machine shares UUCP connections. This is normally set by the system administrator if and when it is needed. %% -- layout_db gui string ~/.zmlayout File: The file specified by this variable contains a list of dialogs and windows that were open the last time the application was terminated. %% -- logfile tty fullscreen mac gui mswindows string NONE ~/mail.log Filename: Set to a filename which logs the ~#headers#~ of outgoing messages. The message body of the message is not logged in the way that it is for the ~#record~var#~ filename. The logfile can be read as a folder to scan for confirmation that messages have been sent. If both ~#logfile#~ and ~#record~var#~ are set, then the logfile and the record files will match. In this case, the record file can be quickly scanned by loading the log file instead. %% -- mailhost tty fullscreen mac gui mswindows boolean string NONE Host: If you use POP (the Post Office Protocol) to fetch your messages from a POP mail server, this variable should be set to the name or address of that server. Z-Mail supports version 3 of the Post Office Protocol. See also the ~#fetch_timeout#~ and ~#pop_options#~ variables. %% -- mail_icon gui string NONE Filename: Names a file containing an alternate pixmap to use when the GUI main window is iconified. Changing this variable after the program is started will not affect the icon. %% -- mailbox_name gui mswindows mac string Mailbox Name: This variable specifies the string used to describe the system mail folder. Whenever the name of the system mail folder is requested, this string will be used instead. If this variable's value contains the string "%n", that string will be replaced by the user's login name. %% -- main_folder_title tty fullscreen mac gui mswindows string NONE Title: The string value that ~#main_folder_title#~ is set to will be printed next to the menu of open folders near the top of your ~#Main window#~ in the graphical user interface. The string may contain formatting characters to show information about the status of your active folder. See the ~#prompt#~ variable for a list of the possible formatting characters. See also ~#folder_title#~. %% -- main_panes gui mswindows mac multivalue # default values: folder,messages,buttons,output # number of multi-values in variable: 8 # list the values: toolbar The toolbar. %% status The message area that displays the status of the currently active folder. %% folder The area that contains the text field where the current folder is specified. %% messages The list of ~#message summaries#~ (~#headers#~). %% buttons The main panel where the user-defined buttons are displayed. %% output The multi-line text area that displays various non-critical output messages. %% command The text field where Z-Mail commands can be typed. %% status_bar The status bar. %% Conditions: Controls which "panes" in the Main window are visible. Unsetting this variable turns on all the panes. %% -- mbox tty fullscreen mac gui mswindows string permanent * ~/mbox Filename: Names a file to use for your default main mailbox instead of the file 'mbox' in your home directory. %% -- message_lines gui mswindows numeric permanent NONE 6 Lines: Set to the initial number of lines of the ~#Message Display window#~. Changing ~#message_lines#~ after the ~#Message Display window#~ has been opened will not change the size of the window. This variable was formerly called "crt_win". %% -- message_panes gui mswindows lite mac multivalue # default values: folder,headers,body,action_area,attachments # number of multi-values in variable: 7 # list the values: toolbar The toolbar. %% folder The area that contains the text field where the current folder is specified. %% headers The summary of the current message headers. %% body The message body that is being displayed. %% action_area The button panel where actions are displayed. %% status_bar The status bar. %% attachments The icons for the message's attachments, if any. %% Conditions: Controls which "panes" in the Message window are visible. Unsetting this variable turns on all the panes. %% -- metoo tty fullscreen gui mswindows mac boolean string FALSE NULL Normally, copies of messages you send to local mailing lists are not sent back to you, because most Mail Transport Agents will remove the message sender's name when forwarding to a mailing list. Setting ~#metoo#~ will preserve your name on such mailing lists if possible, so that you will get a copy of your own mail. When you reply to mail, Z-Mail will also keep your name on any list of addresses that it generates when this variable is set. Z-Mail passes the string value of this variable as an argument to the Mail Transport Agent when sending mail. If the string value begins with a hyphen (e.g., "-m"), Z-Mail separates it from the rest of the ~#sendmail#~ command with a space. If the string value does not begin with a hyphen, no space is added. If the string value is empty, a default value is used, when one is known. %% -- mil_time tty fullscreen mac gui mswindows boolean FALSE NULL 24-hour military time format is used whenever the time of a message is printed, regardless of the format used in the message's Date:. If you change the state of this variable, you must update the current folder in order to see the new time format in the message summaries area of the main window. %% -- msg_attach_label gui mswindows singlevalue description 5 comment Display the comment from the local attachment type database. %% content Display the content name supplied by the sender. If no content name was sent, this is the same as "filename". %% description Display the descriptive text supplied by the sender. If no description was sent, this is the same as "comment". %% filename Display the file name. %% type Display the attachment type. %% Item: This variable controls what information will be displayed below each attachment icon in the attachments area of a message reading window. If this variable is not set, or if none of the other information can be found, the attachment type is displayed. %% -- msg_win_hdr_fmt lite mac gui mswindows string From: %n <%a>\nDate: %W %d %Z\nTo: %?to?\nCc: %?cc?\nSubject: %s Format: This variable controls the format of the text in the headers pane of the Message Reading window in the Motif, Windows, and Macintosh interfaces. The following formatting characters may be used: %a address of the author %c number of characters (bytes) in the message %d date and time of the message (see ~#date_received#~ variable) %f "From" field (author name and address) %i the message-id (sometimes not available) %l number of lines in the message %M month name from the message date %m month number from the message date %N day of the month (number) %n name of the author %s subject of the message %t "To" field (recipients of the message) %T time of the message (see ~#mil_time#~ variable) %u user name (login) of the sender of the message %W day of the week (Sun, Mon, etc.) of the message date %Y year of the message date %y year, last 2 digits only \n a newline \t a tab %% -- newline tty lite string NONE Command: This variable may be set to a command to be executed when a carriage return is the only input to the line mode or Lite mode prompt. %% -- newmail_icon gui string NONE Filename: Names a file containing an alternate pixmap to use to signal the arrival of new mail when the GUI ~#Main window#~ is iconified. Changing this variable after Z-Mail is running will not affect the icon. You must save the new setting of newmail_icon and restart Z-Mail to affect the icon. %% -- newmail_scroll gui mswindows mac boolean TRUE NULL Causes the headers list to scroll to the bottom when new mail arrives. %% -- no_expand tty fullscreen gui mswindows boolean FALSE NULL Prevents expansion of alias abbreviations in outgoing mail ~#headers#~. This is normally considered bad etiquette, but is useful in special cases for administering mailing lists. %% -- no_hdrs tty fullscreen mac gui mswindows boolean FALSE NULL If set, personalized ~#headers#~ (the ~#Envelope#~) are NOT inserted into outgoing mail. This is used to temporarily disable personalized ~#headers#~. %% -- nonobang tty fullscreen boolean TRUE NULL If this variable is set, history references that don't match anything will be left unexpanded, rather than generating error messages. This is handy if you frequently have to type UUCP-style addresses that contain numerous `!' characters. %% -- nosave tty fullscreen mac lite gui mswindows boolean FALSE NULL Prevents outgoing mail from being saved when message composition is aborted. In the ~#Compose window#~, the "Cancel" button normally saves the composition to a file named dead.letter. Aborting with Ctrl-C or ~q in line mode also saves a dead letter. Note that ~#nosave#~ overrides the value of the ~#verify#~ variable. Also see the variable ~#dead#~, which describes the file Z-Mail uses to save aborted messages. %% -- openfolders tty fullscreen gui mswindows mac readonly string Folder Numbers: This variable holds a string consisting of the numeric names of each of the open folders, separated by spaces. The numeric name of a folder is a number sign (#) followed by one or more digits. The system folder is always #0. Other folders are #1, #2, etc. The ~#openfolders#~ variable can be used with the ~#foreach#~ command to apply an operation to every open folder. For example, to ~#update~ui#~ all folders: foreach f ($openfolders) 'update $f' See the ~#foreach#~ command for more information. %% -- output tty fullscreen mac gui mswindows readonly string Messages: This variable holds a ~#message list#~ representing the output of the last successful command. Commands which return an error status do not affect the value of ~#output#~, but successful commands that return no ~#message list#~ will clear it. %% -- pager tty fullscreen string * more Program: If a message is longer than the number of lines that the variable ~#crt~var#~ indicates, then the program named by this variable is executed to view that message. If the user does not have this variable set, the user's environment PAGER is checked. If this isn't set, then Z-Mail's simple internal pager is used. In Lite and GUI modes, an internal pager is always used. %% -- picky_mta tty fullscreen mac gui mswindows boolean multivalue # default values: FALSE # number of multi-values in variable: 4 # list the values: eight_bit The MTA accepts full eight-bit text, not just seven-bit US ASCII. %% omit_commas The MTA is confused by the use of commas to separate addresses, so Z-Mail should omit them. %% omit_from When this is set, Z-Mail will not pass From: and Date: ~#headers#~ to the Mail Transport Agent when sending mail. This may be necessary if your MTA insists on generating its own From: and Date: ~#headers#~. %% uucp_style All addresses passed to the MTA should be in UUCP format, host!user. Set this only if your MTA has trouble with user@host address format. Note that addresses within the message may appear unchanged, but any address seen by the MTA will have been converted. %% Restrictions: Impose various restrictions on the way Z-Mail communicates with the Mail Transport Agent. Setting picky_mta to true (on) is equivalent to setting only the "omit_from" field. %% -- pop_options tty fullscreen mac gui mswindows multivalue NONE 1 preserve Leave mail on the POP server. %% Options: This variable controls various options for POP (Post Office Protocol) support in Z-Mail. See also the ~#use_pop#~ variable. %% -- pop_timeout tty fullscreen mac gui mswindows numeric NONE 15 Minutes: The number of minutes between checks for new mail on the POP server. See also the ~#fetch_timeout#~ and ~#timeout#~ variables. %% -- pop_user tty fullscreen mac gui mswindows string NONE User name: The name Z-Mail uses to identify you to the POP server. If this is not set, the value of ~#user#~ is used instead. %% -- post_indent_str tty fullscreen mac gui mswindows string NONE String: When including the body of a message into an outgoing message, a line following the last line of included text is printed using the string value of this variable. See ~#indent_str#~. %% -- pre_indent_str tty fullscreen mac gui mswindows string NONE String: When including the body of a message into an outgoing message, a line preceding the first line of included text is printed using the string value of this variable. See ~#indent_str#~. %% -- presign tty fullscreen gui mswindows string NONE String: When this is set, Z-mail will sign letters whenever a composition is started. That is, Z-mail will use the values of autosign, autosign2, and fortune to generate a signature for a composition as soon as that composition is started, instead of waiting for the letter to be sent. If the address list is empty when a composition is started, the value of the presign is used as the address list for the purposes of generating a signature. For example, if presign contains the address of someone in autosign2, then the signature file specified in autosign2 is generated whenever a composition is started with an empty address list. %% -- print_cmd tty fullscreen gui mswindows string NONE Program: This string should describe a command for sending messages to the hardcopy printer. If no ~#print_cmd#~ is specified, one of "lpr" or "lp" is used, depending on your operating system. The message to be printed is supplied as the standard input of the command. The value of ~#print_cmd#~ may be a /bin/sh pipeline. The string %P in the value of ~#print_cmd#~ is replaced by the name of the printer (see ~#printer~var#~). The string %O is replaced by the option described by ~#printer_opt#~, which includes the name of the printer (e.g., if %P is "lp", then %O might be "-Plp"). If neither %O nor %P appears, then the ~#printer~var#~ and ~#printer_opt#~ variables are ignored and the command is executed unchanged. If no ~#print_cmd#~ is specified, the command "$ZMLIB/bin/mailp -W80 %O" is used by default. %% -- printer tty fullscreen gui mswindows string * Printer: This variable gives the name of the printer to which the Z-Mail ~#lpr#~ command is directed. This name is normally prefixed with one of "-P" or "-d" (depending on your operating system) when passed to the printing program. If the value of ~#printer~var#~ begins with a hyphen, then no prefix is added. See also ~#printer_opt#~. If ~#printer~var#~ is set to a comma-separated list of names, Z-Mail will display that list at the time you print a message and request that you select a printer name. If ~#printer~var#~ is set to an empty string, Z-Mail will invoke the printing command with no printer argument. This normally causes output to go to the system default printer. %% -- printer_opt tty fullscreen gui mswindows string NONE Option: This string describes the command-line options used to tell your printing program what printer name to use. If ~#printer_opt#~ is not set, the option defaults to "-P" for Berkeley UNIX and "-d" for all other systems. The value of ~#printer_opt#~ is ignored if the printer name begins with a hyphen (see the ~#printer~var#~ variable). The string "%P" in the value of ~#printer_opt#~ is replaced by the name of the printer (see ~#printer~var#~). Otherwise, the printer name is appended to the option with no intervening space, e.g. if the value of ~#printer_opt#~ is "-P" and the value of ~#printer~var#~ is "lp", then the option passed to the printing program is "-Plp". If ~#printer_opt#~ is set to an empty string, Z-Mail will invoke the printing command with no printer argument. This normally causes output to go to the system default printer. %% -- prompt tty fullscreen string permanent * Msg %m of %t:\ String: The string value that ~#prompt#~ is set to will be printed as your prompt. The string may contain formatting characters to show information about the status of your folder: %F full path of the active folder %f name (path tail) of the active folder %m current message number %n number of new messages %u number of unread messages %d number of ~#delete#~d messages %t total number of messages %T current time %N day of the month (number) (today) %W weekday name (today) %M month name (this month) %Y year (this year) %y year (last 2 digits only) %$ introduces a variable name \n newline \t tab %% -- quiet tty fullscreen gui mswindows mac boolean multivalue NONE 9 autosign Do not report that a signature was appended to an outgoing message. %% blink Do not flash and beep the error dialog in GUI mode. %% complete Do not beep when a file completion fails to match. %% fortune Do not report that a fortune was appended to an outgoing message. %% index Do not complain about an invalid index. %% newmail Do not announce the arrival of new mail. %% pick Do not verbosely describe message searches. %% save Do not print a message for every message saved; only report the total. %% startup Do not print the version information when starting the program in command-line mode. %% Conditions: This variable tells Z-Mail to be quiet in various circumstances. If set, but not to any values, Z-Mail does not print version information when the program begins executing in command-line mode. %% -- realname tty fullscreen mac gui mswindows string * Name: Your real name, which is used in the From: header of outgoing messages. %% -- record tty fullscreen mac gui mswindows string NONE Filename: Set to the name of a file to record all outgoing mail. The pathname may begin with `+' (indicating the user's ~/Mail directory or the value of the ~#folder~var#~ variable) or with a `~' indicating the user's home directory (the value of the ~#home#~ variable). %% -- record_control tty fullscreen mac gui mswindows multivalue NONE 3 attachments Don't record messages with attachments. %% resend Don't record messages that are being resent. %% priority Only record priority messages. %% Conditions: Specifies a series of conditions which control when an outgoing message is recorded to a file. %% -- record_max tty fullscreen mac gui mswindows numeric gui_max=1000000 NONE Size: Specifies the maximum size in bytes of outgoing messages that are recorded. If a message is larger than this, it will not be recorded. %% -- record_users tty fullscreen mac gui mswindows boolean FALSE NULL When this variable is set, addresses in outgoing mail are tested against file names in the folder directory ( ~/Mail or the value of the ~#folder~var#~ variable). If the user name in the address matches a file name, then a copy of the message is stored in that file. Note that the file must exist before the message is sent in order for a copy to be recorded. %% -- recursive tty fullscreen mac gui mswindows boolean FALSE NULL This variable must be set in order for user-defined ~#functions#~ to call themselves (this is known as "recursion"). If it is not set, any recursive function call will result in an error. %% -- redirect tty fullscreen gui mswindows readonly boolean NULL True if Z-Mail is running in send-only mode with redirected input, false otherwise. %% -- reply_to_hdr tty fullscreen mac gui mswindows boolean string NONE Headers: When replying to mail, Z-Mail generates a return email path to the sender by examining various message ~#headers#~ in the original message. By default, the address is taken from the Reply-To: header, the From: header and the Return-Path: header. You can override this behavior by setting the reply_to_hdr variable to specific header names. For example, set reply_to_hdr = "sender, reply_to, return_path" If reply_to_hdr is set, but not to a specific value, then the special header "From " is used. This may or may not be supported on your particular system, and is only useful for UUCP sites only. Ask your system administrator for more information if you are unsure about this setting. %% -- save_empty tty fullscreen mac gui mswindows boolean FALSE NULL When ~#save_empty#~ is set, folders which have all messages ~#delete#~d are NOT removed when ~#update~ui#~d. Note that the ~#update~cmd#~ command never removes folders. Empty folders are removed only if ~#update~ui#~d by ~#close~cmd#~ or if ~#update~ui#~d when Z-Mail quits. %% -- screen tty fullscreen numeric permanent NONE 12 # of Headers: Sets the number of ~#message summaries#~ treated as a screenful by the ~#headers#~ command. This variable only applies to the tty interface. If this variable is not set, then a default value of 12 is used. %% -- sendmail tty fullscreen gui string NONE Program: Names a program to use to deliver mail instead of using the default. This is normally set only by the system administrator. %% -- show_deleted tty fullscreen mac lite gui mswindows boolean is_gui NULL Controls whether deleted messages may be displayed. In line mode only, ~#show_deleted#~ also controls whether ~#delete#~d messages in header summary listings are shown. In GUI mode, the Message Display window will close automatically when the displayed message is ~#delete#~d unless one of ~#show_deleted#~ or ~#autoprint#~ is set. %% -- sort tty fullscreen mac gui mswindows boolean string NONE Option(s): This variable may be set in the initialization file to presort mail in the system mailbox upon entering Z-Mail. The value of this variable is the same as the arguments to the ~#sort~cmd#~ command. For example: set sort="-r -d -s" will sort the system mailbox by reverse-date and subject. If the variable ~#always_sort#~ is also set, then the system mailbox will be sorted whenever new mail arrives there. %% -- speller gui string /usr/bin/spell Program: Names a program to be used for ~#spell checking#~ in compositions and other editable texts. This program should expect a file name as its sole argument and should print on its standard output the misspelled words found in that file, one word per line. The speller program is used to fill the list of misspelled words in the ~#Search and Replace#~ dialog. %% -- split_limit tty fullscreen gui boolean numeric gui_max=3072 TRUE 250 Kilobytes: Specifies the size in kilobytes that a message must exceed in order for MediaMail to offer to split it into several parts. Very large messages can't be delivered on some systems; having a message sent in smaller pieces helps ensure safe delivery. If not set, split_limit defaults to the value of ~#split_size#~. %% -- split_sendmail tty fullscreen gui string $ZMLIB/bin/split_sendmail Program: Specifies the program that delivers split messages to sendmail. Messages are split into smaller pieces when their size exceeds that specified by the ~#split_limit#~ variable. %% -- split_size tty fullscreen gui boolean numeric gui_max=3072 TRUE 250 Kilobytes: Specifies the maximum size of each message part when a large message is being split into smaller ones to ensure safe delivery. Messages are split only when their size exceeds that specified by the ~#split_limit#~ variable. If not set, split_size defaults to the value of ~#split_limit#~. %% -- squeeze tty fullscreen mac gui mswindows boolean FALSE NULL If this variable is set, consecutive blank lines in message bodies are compressed to a single blank line for display. %% -- status tty fullscreen mac gui mswindows readonly string NULL This variable records the success or failure status of the most recently executed command. All line-mode commands return 0 (zero) for success and a negative value for error. This variable is most useful in scripts to test the success of an operation before proceeding. %% -- summary_lines gui mswindows numeric NONE 6 # of Headers: Sets the initial number of ~#message summaries#~ displayed for the graphical interface. If this variable is not set, a default value is taken from your GUI window system environment. This variable was formerly called "screen_win". %% -- summary_fmt tty fullscreen mac gui mswindows string permanent * %22n %M %-2N %T (%l) %.23s Format: This variable controls the format of the ~#message summaries#~ in the Main window. When printing the summaries, this variable is evaluated and each character in the string is duplicated unless a `%' character is encountered. `%' introduces an abbreviation for one of the ~#headers#~ of the message. (This variable was formerly called "hdr_format".) %a address of the author %c number of characters (bytes) in the message %d date and time of the message (see ~#date_received#~ variable) %f "From" field (author name and address) %i the message-id (sometimes not available) %l number of lines in the message %M month name from the message date %m month number from the message date %N day of the month (number) %n name of the author %s subject of the message %t "To" field (recipients of the message) %T time of the message (see ~#mil_time#~ variable) %u user name (login) of the sender of the message %W day of the week (Sun, Mon, etc.) of the message date %Y year of the message date %y year, last 2 digits only \n a newline \t a tab %% -- templates tty fullscreen mac gui mswindows string NONE Directories: Describes the default directories (separated by spaces) where message ~#forms#~ (or ~#templates~ui#~)can be found. The system administrator may provide a directory (usually $ZMLIB/forms ) where prepared forms are stored. However, each user can provide forms for his own use by placing them in the directories described by this variable. All files located in these directories are expected to be ~#forms#~. If a file in one of these directories is named "default", Z-Mail reads that file into every message you compose, unless you specify a different template. Note that the ~#templates#~ variable must be set in order for the "default" template to be used, even if the "default" template is stored in the system templates directory. Note that the directories specified by this variable are searched in reverse order; if you specify the value of templates as: /usr/fred/templates /usr/jane/templates and both directories contain a template called "expenses", the version in /usr/jane/templates will be used. %% -- textpart_charset tty fullscreen gui mswindows string iso-2022-kr Character set: This variable names the character set that Z-Mail will use by default when sending text body parts in outgoing messages. (See below for a list of valid character sets.) If you generate text message body parts that use non-ASCII characters (Cyrillic, for example), you should set this variable to the name of the character set with which you are composing your body parts. This variable is normally set by your system administrator. See the ISO document 'Information Processing -- 8-bit Single-Byte Coded Graphic Character Sets' for a complete description of the character sets listed below. This variable's contents are not case-sensitive. The following is a list of valid character sets. You can specify a character set in textpart_charset that is not listed here, but you must precede it with 'X-' to maintain compliance with the ~#MIME#~ specification. Variable value Common Name Example languages -------------- ----------- ----------------- US-ASCII ASCII English (7-bit) ISO-8859-1 Latin 1 Western Europe ISO-8859-2 Latin 2 Eastern Europe ISO-8859-3 Latin 3 Dutch, Esperanto ISO-8859-4 Latin 4 Northern Europe ISO-8859-5 Latin/Cyrillic Cyrillic ISO-8859-6 Latin/Arabic Arabic ISO-8859-7 Latin/Greek Greek ISO-8859-8 Latin/Hebrew Hebrew ISO-8859-9 Latin 5 Various European ISO-2022-JP JUNET Japanese RFC-1521 recommends downgrade of text/plain character sets to us-ascii whenever possible. Messages with only ASCII characters are marked us-ascii, regardless of the setting of textpart_charset. %% -- thisfolder tty fullscreen mac gui mswindows readonly string Folder: Gives the current folder name. %% -- timeout gui mswindows mac numeric NONE 30 Seconds: Number of seconds between checks for new mail. If use_pop is set, then ~#pop_timeout#~ is used instead. %% -- tmpdir tty fullscreen mac gui mswindows string permanent * /usr/tmp Directory: Names a directory to use for temporary files. If not set, the directory "/tmp" or the value of the environment "TMPDIR" is used. %% -- toplines tty fullscreen gui mswindows numeric permanent NONE 18 Lines: Number of lines of a message to print for the 'top' command. %% -- trusted_functions gui string boolean true trusted_mailto trusted_sendfile Functions: This variable contains a list of functions that other applications may cause MediaMail to execute. You should be extremely careful about modifying the setting of this variable, and you should take steps to ensure that functions you add to it cannot be used to do malicious things. If this variable is set, you should be using X authorization to help control access to your X server. %% -- use_pop tty fullscreen mac gui mswindows boolean permanent FALSE Use POP: If you use POP (the Post Office Protocol) to fetch your messages from a POP mail server, this variable should be set. Changing this variable after Z-Mail is started will have no effect. Z-Mail supports version 3 of the Post Office Protocol. See also the ~#mailhost#~, ~#fetch_timeout#~, and ~#pop_options#~ variables. %% -- user tty fullscreen mac gui mswindows string permanent * Login name: The name you use to log in. You should not need to change this. The value of this variable is not saved when .zmailrc is written. %% -- unix tty fullscreen boolean FALSE NULL When this variable is set, Z-Mail will attempt to execute as a UNIX program any command that it does not itself recognize. In GUI mode, the output of the UNIX command is directed to the ~#Main window#~ output text area, and the standard input of the UNIX command is closed. If a UNIX command is executed in this way from GUI mode, Z-Mail will wait a few seconds for it to complete. If the command does not finish within this time, Z-Mail will display the Task Meter to let you know that an external command is running. Press the Stop button to continue your Z-Mail session. %% -- verbose tty fullscreen boolean string FALSE NULL Z-Mail passes this verbose flag to the Mail Transport Agent when sending mail, and will print additional information about the sending process. In GUI mode, a dialog appears containing the output from the MTA. If the string value of this variable begins with a hyphen (e.g., -v) Z-Mail separates it from the rest of the ~#sendmail#~ command with a space. If the string value does not begin with a hyphen, no space is added. If the string value is empty, a default value is used if one is known, otherwise verbosity is not enabled. %% # For verify, recall that the first word on the line must be the boolean # truth value, and the rest is the multivalue set when true. -- verify tty fullscreen lite mac gui mswindows boolean multivalue is_gui?TRUE:is_lite close,dead,split_send,remove 8 addresses Same as "mail", but display all addresses for confirmation. %% close Ask for confirmation before ~#updating#~ any folder, only when that folder is being ~#close#~d. %% dead Confirm saving a dead letter when a Compose window is cancelled. This is ignored if ~#nosave#~ is also set. %% mail Ask for confirmation before sending messages. %% mkdir Ask for confirmation when automatically creating directories. %% remove Ask for confirmation before removing a file. %% update Ask for confirmation before ~#updating#~ any folder, at any time. %% split_send Ask for confirmation before splitting up large compositions. %% quit Ask for confirmation before quitting. %% Conditions: This variable causes Z-Mail to request confirmation of the specified actions. %% -- version tty fullscreen mac gui mswindows readonly string NULL Holds the version identification of the Z-Mail program. Used in the X-Mailer header of outgoing messages. Read-only. %% -- visual tty fullscreen gui string * vi Visual editor: This variable is only used if the wineditor variable is not set and there is no WINEDITOR environment variable. The visual variable May be set to the visual editor to use when editing outgoing messages. The default is specified by the environment string VISUAL or as set by the system administrator. %% -- warning tty fullscreen mac gui mswindows boolean FALSE NULL When set, Z-Mail will display warning messages for non-critical errors. Specifically, Z-Mail will warn you about: Duplicate attachment definitions. Missing headers in ~#undigest#~. Attempts to set read-only variables. Using the ~#unalias#~ command on an alias that doesn't exist. Using the ~#un_hdr#~ command on a header that doesn't exist. Using the ~#uncmd#~ command on a command that doesn't exist. %% -- window_shell gui string NONE Program: This variable specifies a program to use when a tty window is needed for input or output from Z-Mail and the ~#winterm#~ variable is not set. It is also used in GUI mode to create a new tty window for an external editor (named by ~#visual#~) to run in when the ~#wineditor#~ variable is not set. Z-Mail starts an external editor in GUI mode by appending the value of ~#visual#~ (or ~#editor#~ if ~#visual#~ is undefined) to ~#window_shell#~, then executing the result as a UNIX command. If window_shell is unset, Z-Mail will use "xterm -e" by default. If you use an external editor that creates its own window, you should set ~#wineditor#~ to the editor. %% -- winterm gui string NONE Program: Set this variable to the name of the program to run when you create shell processes in GUI mode. If the WINTERM environment variable is set, winterm is set by default to its value. If winterm is unset, the value of ~#window_shell#~ is used instead. %% -- wineditor gui string ieditor Program: When you invoke an external editor in GUI mode, the program specified by wineditor is executed in favor of the programs specified by either the ~#visual#~ or ~#editor#~ variables. Common settings of this variable include: xterm -e vi jot -f Do not specify wineditor in a way that will cause the external editor to be invoked as a background process. For example, the jot program is automatically invoked as a background process unless the -f option is specified. Therefore, in order to use jot as your external editor you should set this variable to jot -f rather than jot If you unset this variable, the value of the WINEDITOR environment variable is used instead, if it is set. If you choose to unset the wineditor variable, you should be certain that the WINEDITOR environment variable is not specified in a way that causes the editor to be invoked as a background process, as described above. If the wineditor variable and the WINEDITOR environment variable are not set, Z-Mail invokes the external editor in GUI mode by appending the value of the ~#visual#~ variable to the value of the ~#window_shell#~ variable and executing the result as a UNIX command. %% -- wrap tty fullscreen mac gui mswindows boolean FALSE NULL Normally, when the last message is deleted, the current message pointer remains pointing to the last message and the user is done reviewing his mail. If this variable is set, the current message pointer will wrap around to the beginning of the user's messages again to the ~#next#~ undeleted message. This also applies to the ~#next#~ command. %% -- wrapcolumn tty fullscreen mac gui mswindows boolean numeric gui_max=200 FALSE 72 Column to wrap: The value of wrapcolumn specifies the length of lines in outgoing messages. If wrapcolumn set to no value, a value of 72 is assumed, indicating that lines will be broken in between words at or before the seventy-second character on the line. Line wrapping can be disabled by unsetting wrapcolumn, by setting it to zero, or by unsetting ~#autoformat#~ (see below). You should set wrapcolumn to a value less than 80, since most messages are read on displays that are 80 columns wide. A value in the range of 72 to 78 is considered ideal. Note that wrapcolumn is used in the Motif, Macintosh, Windows, and Lite interfaces only when ~#autoformat#~ is also set. If wrapcolumn has the value 0 (zero) but ~#autoformat#~ is set, ~#autoformat#~ ignores wrapcolumn and wraps at the width of the Compose window. %%