"Another program has control of the SCSI bus. Hard disks, SCSI floppy disks, and other SCSI devices can't be built.";
/* Label for startup disk */
"Startup Disk";
/* Label for single SCSI hard disk */
"Hard Disk";
/* Label for multiple SCSI hard disks in printf format */
"Hard Disk #%d";
/* Label for single removable SCSI hard disk */
"Hard Disk";
/* Label for multiple SCSI hard disks in printf format */
"Hard Disk #%d";
/* Label for single optical disk */
"Optical Disk";
/* Label for multiple optical disks in printf format */
"Optical #%d";
/* Label for single optical disk */
"CD-ROM";
/* Label for multiple optical disks in printf format */
"CD-ROM #%d";
/* Disk type string for internal floppies */
"Internal Floppy";
/* Disk type string for opticals */
"NeXT Optical Disk";
/* Label for floppy in disk selection box when there is at most one internal floppy */
"Int. Floppy";
/* Label for multiple internal floppies in printf format */
"Int. FD #%d";
/* Label for single external floppy */
"Ext. Floppy";
/* Label for multiple external floppies in printf format */
"Ext. FD #%d";
/* Label for single external floppy */
"Audit Disk";
"Cancel";
"Sorry, the password you entered is not correct.";
"You must have superuser status to perform upgrades.\nPlease enter the root password.";
/* Open panel title */
"Open";
/* Panel title */
"Open";
/* Panel text */
"Can't open %s.";
/* Title */
"Quit";
"The upgrading instructions in %s are corrupted, you can't read them, or the instructions aren't located at the root of the new release.";
"Could not find the new software. This application should be run from the root of the new release.";
/* Appears during audit */
"The source disk you've selected doesn't contain the right version of software for this upgrade.";
/* Attn panel title */
"Cannot Run";
"Upgrader is not set up correctly. The setuid bit must be turned on and the application owned by root. Contact your system administrator.";
/* Open panel title */
"Open Upgrade";
/* Open panel title */
"Open Plan";
/* Attn panel title */
"Find Disks";
"This computer has no disks suitable for upgrading.";
"This disk contains Release %s. Upgrading will install Release %s.";
"Upgrading this disk will install Release %s.";
"This disk isn't mounted yet. Upgrading will install Release %s.";
/* Less-frightening disk info for mini status. */
"Removable disk";
/* Mini string for label of disk */
"Disk named \"%s\"";
/* Mini format string for non-removable disks w/no name */
"Unnamed disk";
/* Mini format string for disk information. Arg is size in MB. Preceded by disk name if any. */
", %d MB";
/* Second info line of long form. */
"Device name %s";
/* Printed to console arg is filename */
"Upgrader: Cannot open bill of materials %s. The associated package won't be upgraded.\n";
/* Printed to console arg is filename */
"Upgrader: The package '%s' is present and will be upgraded.\n";
/* Printed to console arg is filename */
"Upgrader: The package '%s' is present and will be removed.\n";
/* Printed to console arg is short name */
"Upgrader: The package '%s' is not a part of the system software, or is damaged. It won't be upgraded.\n";
/* Button title which swaps with Plan Upgrade */
"Stop";
/* Button title which swaps with Stop */
"Plan Upgrade";
/* Status message displayed during audit */
"Merging bills of materials...";
/* Status message displayed during audit */
"Examining disk...\nCurrent folder: %.128s";
/* Status message displayed while target being mounted */
"Mounting disk...";
/* Status message displayed by default */
"Click Plan Upgrade to start.";
/* Attn panel title */
"Mount Target Disk";
/* Arg is device path. */
"The disk %s couldn't be mounted.";
/* Status message */
"Finding bills of materials...";
/* Attn panel title */
"Plan Upgrade";
"The source disk doesn't contain a bill of materials for the base system. The upgrade can't proceed.";
"The source and target disks are the same. A disk can't be upgraded using its own files.";
"The disk to be upgraded doesn't contain a bill of materials for the base system. The upgrade can't proceed.";
"Planning complete. Ready to perform the upgrade.";
"Plan loaded. Ready to perform the upgrade.";
"Click Edit Plan to see the upgrade\nplan, or click Upgrade to continue.";
"Analyzing results...\nCurrent folder: %.128s";
"Multiple selection: %d items";
"No selection";
/* More generic term for file device etc. Used with multiple selections. This version is plural */
"items";
/* More generic term for file device etc. Used with multiple selections. This version is singular */
"item";
"The selected items are dissimilar. Select fewer files to get more specific information.";
"The contents of this %s have been modified.";
"The contents of these %s have been modified.";
"This %s, which has been modified, isn't needed anymore.";
"These %s, which have been modified, aren't needed anymore.";
"This %s is included in the new release, but it looks like you've already installed your own version.";
"These %s are included in the new release, but it looks like you've already installed your own versions.";
"You deleted this %s. You can leave it deleted or install the new version.";
"You deleted these %s. You can leave them deleted or install the new versions.";
"This %s isn't needed anymore, but it's already been deleted. No action is necessary.";
"These %s aren't needed anymore, but they've already been deleted. No action is necessary.";
"This %s hasn't been modified. There's a new version in the new release.";
"These %s haven't been modified. There are new versions in the new release.";
"This %s hasn't been modified, and the version in the new release is identical.";
"These %s haven't been modified, and the versions in the new release are identical.";
"This %s isn't needed anymore.";
"These %s aren't needed anymore.";
"This %s is part of the new release.";
"These %s are part of the new release.";
"You changed the settings on this %s.";
"You changed the settings on these %s.";
"This %s, on which the settings have been modified, isn't needed anymore.";
"These %s, on which the settings have been modified, aren't needed anymore.";
"This %s shouldn't be modified during an upgrade.";
"These %s shouldn't be modified during an upgrade.";
"This %s can't be updated because it's been deleted from your copy of the new release.";
"These %s can't be updated because they've been deleted from your copy of the new release.";
"You replaced this %s, or one of its parents, with a file or symbolic link. It can't be upgraded.";
"You replaced these %s, or one of their parents, with files or symbolic links. They can't be upgraded.";
"A filesystem has been mounted over this %s. It can't be upgraded.";
"A filesystem has been mounted over these %s. They can't be upgraded.";
/* what to call a plain file */
"file";
/* and a plural version */
"files";
/* what to call a directory */
"directory";
/* and a plural version */
"directories";
/* what to call a slink */
"symbolic link";
/* and a plural version */
"symbolic links";
/* what to call a device file */
"device file";
/* and a plural version */
"device files";
"The file %s is executable.";
"Open Anyway";
"The executable file %s exists only on the new release. You can't run it yet.";
"Some of the selected files couldn't be opened.";
/* Attn panel title */
"Close";
"Your changes to the upgrade plan haven't been saved.";
/* button title */
"Save Changes";
/* button title */
"Don't Save";
/* button title */
"Discard Changes";
"The upgrading hint '%s' has no tab character to separate the control expression and attributes.";
"The hint '%s' specifies incompatible attributes. It will be skipped.";
"The string '%s' doesn't specify a recognized attribute. The whole hint will be skipped.";
"Preparing upgrade plan...";
"Upgrade";
"Could not figure out how much space is free on the disk to be upgraded.";
"Could not figure out how much disk space would be taken up by the upgrade.";
"There's not enough free disk space to perform the upgrade. %.1fMB is needed; only %.1fMB is available. Remove some personal files and try again (removing system files won't help and will confuse the upgrader).";
"Upgrade Anyway";
"There's not enough free disk space to make backup copies of all your customized files (there are %.1fMB of customized files to update). You can remove some personal files and try again, or continue with the upgrade. (Removing system files won't help and will confuse the upgrader.)";
/* The name of the folder in which to save copies of user-customized files */
"/UpdatedFiles";
"Some customized files (%.1fMB) will be updated. Save a copy of the old versions?";
/* Button title */
"Save Copies";
/* Button title */
"Don't Save";
"Upgrading...";
"Stop";
"Stopping the upgrade is dangerous. Your system could be left in an unrecoverable state.";
"The disk was upgraded successfully.";
"Click Restart to restart the computer\nwith the new software.";
/* Button title */
"Restart";
"Click OK to reset, or Quit.";
/* Button title */
"OK";
"An upgrade is being planned.";
/* Button title */
"Quit Anyway";
"You are in the middle of upgrading a disk.";
"Couldn't restart the computer. You'll have to do it yourself.";
/* Attn panel title */
"Dead Thread";
"The upgrade thread died";
"The audit thread died";
/* attn panel title */
"Continue";
"Running applications can interfere with the upgrade and may leave your disk in an inconsistent state. Are you sure you want to continue without quitting these applications?";
"Restarting the computer...";
"Synchronizing disks...";
"Stopping processes...";
"Really run the entire upgrade without asking any more questions? You should be sure to quit all other applications first.";
/* Filename for upgrade plan */
"%s/Release%s.uplan";
"Saving control file to disk...";
"Writing upgrade plan to %s...\n";
" (Note: New version has been tampered with.)";
" (Note: At least one new version has been tampered with.)";
/* Attn panel title */
"No Wrapper";
"This application must be run from the Workspace Manager.";
"Processing files...\nCurrent file: %.128s";
/* Attn panel title */
"Upgrade Failed";
"Could not locate the upgrade slave command.";
"Couldn't read the upgrade plan.";
"The upgrade plan file contained syntax errors, or the upgrade slave process wasn't executed correctly.";
"A fatal upgrading error has occurred. See the upgrade log for details.";
"Some inconsistencies were discovered during the upgrade. Would you like to see the log?";
"Show Log";
/* Slave usage message */
"Usage: %s planfile sourceroot targroot\n";
/* Slave cant open plan file */
"%s: Could not open %s\n";
/* Slave cant open source root */
"LCould not open source root %s\n";
/* Slave cant open target root */
"LCould not open target root %s\n";
/* Slave cant open target root */
"%s: Bad opcode - no slave operation called '%s'\n";
/* Slave cant write boot block */
"LCouldn't write new boot block %s.\n";
"LCouldn't change settings on %s.\n";
"LCouldn't remove %s.\n";
"LCouldn't make folder %s.\n";
"LCouldn't make symbolic link %s (target %s).\n";
"LCouldn't make hard link %s (to existing file %s).\n";
"LCouldn't make device file %s.\n";
"LCouldn't copy %s to %s.\n";
/* Attn panel title */
"Preprocess Disk";
/* Error panel message */
"The preprocessing script wasn't able to operate successfully on the target disk. See log for details.";
/* Status message */
"Running postprocessing script...";
/* Attn panel title */
"Postprocess Disk";
/* Error panel message */
"The upgrade completed, but the postprocessing script failed. See the log for details.";
"The script is not readable or is not executable.\n";
"Couldn't execute %s.\n";
/* Attn panel title */
"Restart Upgrade";
"You have already planned an upgrade or opened an old plan. It's too late to restart an old upgrade.";
"Click Upgrade to continue.";
"LUpgrade starting at %s";
"LUpgrade complete at %s";
"Getting ready...";
/* This is the filename to use for the directory of saved files in /UpdatedFiles */
"TableOfContents";
/* This is used as the first line of the TableOfContents file and first col should be 25 chars if possible */
"Filename Original location\n";
/* The name of the app with no underbars */
"Upgrader";
/* Name of file to write log messages to arg is target disk mount point */
"%s/UpgradeLog";
/* Window title for upgrade log window arg is filename */
"Upgrade Log: %s";
"Other applications shouldn't be used while an upgrade is in progress.";
"Some changes to your system files were discovered while planning the upgrade. These changes are described in the upgrade plan. Would you like to review the plan before continuing?";
"Review Plan";
"Don't Review";
/* Explanation of why their developer software is being taken away */
"Note";
/* Explanation of why their developer software is being taken away */
"Developer software isn't included in this release of NeXTSTEP. Developer software from earlier releases doesn't work with this release, so it will be deleted.";