home *** CD-ROM | disk | FTP | other *** search
/ Monster Media 1993 #2 / Image.iso / os2 / wr07011.zip / WR07011.PKZ / LSI.MSG (.txt) < prev    next >
OS/2 Message File  |  1993-07-05  |  4KB  |  81 lines

  1. MKMSGF
  2.            IBM OS/2 PEER 1.0 Installation/Configuration
  3.            Files needed by the installation/configuration program are
  4.            being temporarily copied to the %1: drive.
  5.            Once the files are copied, the installation/configuration
  6.            program will start.
  7.            When installation completes, these temporary files
  8.            will be removed.
  9. EThe operating system must be OS/2 2.0 and above.
  10. EThe OS/2 Peer installation/configuration program is already running.
  11. EThere is not enough space on any fixed disk.
  12. E%1 is missing, damaged, or cannot be copied to the fixed disk.
  13. E%1 failed to load.
  14. EThere is not enough disk space available to process locked files.
  15. EThe installation/configuration program has detected an error in the %1 parameter.
  16. EAn access-denied error occurred while loading the installation/configuration program.
  17. EThe installation/configuration program has detected an incorrect value for the OS/2 environment variable REMOTE_INSTALL_STATE.
  18. ELogging initialization failed for file %1.
  19.          The installation command syntax is:
  20.          [d:\path\]PEERRMT {/PEER} [/R:d:\path\filename
  21.           /G:d:\path /L1:d:\path\filename /L2:d:\path\filename]
  22.          where:
  23.          /PEER Specifies you are remotely installing the peer code.
  24.          /R    Specifies the fully qualified file name of a response file.
  25.          /G    Specifies the fully qualified path of a directory that contains files included by the response file.
  26.          /L1   Specifies the fully qualified file name of an error log file.
  27.          /L2   Specifies the fully qualified file name of a history log file.
  28. IInstalled %1
  29. IRemoved %1
  30. IMoved %1 to %2
  31. IThe locked file device driver is loaded.
  32. I    Processing locked files...
  33. I    Processing complete.
  34. I%1 completed successfully.
  35. I%1 contains the commands that failed.
  36.     Preparing ACLs for workstation, Please wait...
  37. The PREPACL command syntax to remove and save ACLs is:
  38.   PREPACL /P /B:d:\path\filename | /N [/FL:d:\path\filename |
  39.           /DL:d:\path\filename | /D:d:\path] [/L1:d:\path\filename]
  40.           [/L2:d:\path\filename] [/LR:d:\path] [/O]
  41.   where:
  42.    /P  specifies to remove the ACLs.
  43.    /B  is the file where the removed ACLs will be saved.
  44.    /N  specifies not to save the removed ACLs.
  45.    /FL is a file containing a list of files from which to remove ACLs.
  46.    /DL is a file containing a list of subdirectories from which to remove ACLs.
  47.    /D  is a subdirectory from which to remove ACLs.
  48.    /L1 is the name of the error log file.
  49.    /L2 is the name of the history log file.
  50.    /LR is the path to the \IBMLAN subdirectory.
  51.    /O  specifies to remove only the ACLs specified with this command.
  52. The PREPACL command syntax to restore ACLs is:
  53.   PREPACL /R /B:d:\path\filename [/L1:d:\path\filename]
  54.           [/L2:d:\path\filename] [/LR:d:\path]
  55.   where:
  56.    /R  specifies to restore ACLs.
  57.    /B  is the file containing the ACLs to restore.
  58.    /L1 is the name of the error log file.
  59.    /L2 is the name of the history log file.
  60.    /LR is the path to the \IBMLAN subdirectory.
  61.     Installing Thin 386HPFS, please wait...
  62. The THIN386 command syntax is:
  63.   THIN386 /B:d /T:d:\path [/L1:d:\path\filename] [/L2:d:\path\filename]
  64.   where:
  65.     /B  is the boot drive letter (where CONFIG.SYS is located).
  66.     /T  is the path where the THIN386 files will be installed.
  67.     /L1 is the name of the error log file.
  68.     /L2 is the name of the history log file.
  69. ????????????????????????????????????????????????????????????????????????????
  70. EAn error occurred while writing to log file %1. Logging to that file has been disabled.
  71. E%1 completed unsuccessfully with a return code of %2.
  72. EIBMLANLK detected errors processing the following commands.
  73. ??EFile specified (/B:%1) does not have the proper format.
  74. EOS/2 error %1 has occurred.
  75. EThe LAN Server APIs cannot be used.
  76. EThe syntax is incorrect.
  77. EThe file or subdirectory %1 could not be found.
  78. EOS/2 error %1 has occurred while processing file %2.
  79. EThe file or subdirectory %1 could not be created.
  80. EThere is not enough disk space on drive %1.
  81.