home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Monster Media 1993 #2
/
Image.iso
/
os2
/
boot21.txt
< prev
next >
Wrap
Text File
|
1993-07-02
|
3KB
|
78 lines
Volume in drive A is unlabeled Serial number is 2240:C014
Morton F. Kaplon CIS : 73457,437
Directory of a:\*.*
Boot Disk for OS/2 2.1 GA isomg FAT File System Mon 06-28-1993
This is the minimum I have been able to attain. It will just
fit on a 1.2 MB floppy
Use sysinstx to create the bootable floppy; From c: sysinstx a:
sysinstx.com is on the Installation Diskette
The rest should already be on the C: drive of installed 2.1
4-22-93 14:50 401 0 ___A_ BKSCALLS.DLL
4-22-93 14:51 398 0 ___A_ BMSCALLS.DLL
4-25-93 16:04 9443 0 ___A_ BVHINIT.DLL
4-22-93 14:54 454 0 ___A_ BVSCALLS.DLL
4-22-93 16:59 3632 0 ___A_ CLOCK01.SYS Use CLOCK02.SYS if PS-2
4-29-93 21:41 90624 53 ___A_ CMD.EXE
6-28-93 20:29 411 0 ___A_ CONFIG.SYS
4-29-93 21:52 25610 0 ___A_ COUNTRY.SYS
4-29-93 21:30 90854 0 ___A_ DOSCALL1.DLL
6-24-93 22:45 1536 0 RHSA_ EA DATA. SF Created by sysinstx
4-25-93 17:47 25102 0 ___A_ IBM1FLPY.ADD Use IBM2FLPY.ADD if PS-2
4-25-93 20:30 9684 0 ___A_ IBMINT13.I13
4-22-93 17:37 29525 0 ___A_ KBD01.SYS Use KBD02.SYS if PS-2
4-22-93 15:32 858 0 ___A_ KBDCALLS.DLL
4-22-93 16:09 508 0 ___A_ MSG.DLL
4-22-93 16:08 466 0 ___A_ NLS.DLL
6-24-93 22:39 1099 0 RHSA_ OS2BOOT Created by sysinstx
4-25-93 16:12 56000 0 ___A_ OS2CHAR.DLL
4-22-93 15:39 33236 0 ___A_ OS2DASD.DMD
5-06-93 16:13 734366 0 ___A_ OS2KRNL
4-25-93 15:19 28160 0 ___A_ OS2LDR
4-22-93 11:31 8516 0 ___A_ OS2LDR.MSG
4-29-93 21:27 15250 0 ___A_ QUECALLS.DLL
5-03-93 20:12 5590 0 ___A_ SCREEN01.SYS Use SCREEN02.SYS if PS-2
4-25-93 16:18 32806 0 ___A_ SESMGR.DLL
4-25-93 16:11 1825 0 ___A_ VIOCALLS.DLL
1,206,354 bytes in 26 file(s) 1,211,392 bytes allocated
246,272 bytes free
Config.sys to be used with above file set
buffers=32
iopl=yes
memman=noswap
SET OS2_SHELL=CMD.EXE
protshell=cmd.exe
diskcache=64,LW
protectonly=yes
libpath=.;\;
set path=\;\
set dpath=\;
set keys=on
BASEDEV=OS2DASD.DMD
basedev=ibm1flpy.add If PS-2 use ibm2flpy.add
basedev=ibmint13.i13
REM basedev=print01.sys Remove REM if print01.sys used
Note that print01.sys is not used. This means that printing is not
supported from this floppy. If used be sure basedev=print01.sys is
in config.sys.
REPLACE PRINT01.SYS with PRINT02.SYS if PS-2
The basedev=ibmint13.i13 should support just about any hard drive
I believe and this has the smallest size. It is smaller than the
os2scsi.dmd which also supports SCSI but is not required.
If installing High Performance File System the following should
be in config.sys and the files on the floppy
IFS=HPFS.IFS /CACHE:64 /CRECL:4 129090 bytes
IFS=CDFS.IFS /Q 40292 bytes
I am not sure the CDFS.IFS is required if CDROM not used.
In any event when these are added to the floppy it does require
a 1.44 MB floppy.