THIS WILL COPY THE FILES TO YOUR HARD DISK, UNCOMPRESS THEM AND GET THEM READY FOR THE FINAL SETUP UNDER WINDOWS 'FILE' - 'RUN'.
SO, WHEN DONE -- RUN FILE - AND THEN 'RUN' FROM THE FILE MANAGER AND TYPE '\PX999ION\SETUP' AND THE PROGRAM WILL INSTALL AUTOMATICALLY. If you have trouble with this for whatever reason, go to the manual installation which
gives all the steps to install manually.
If it does not install automatically, we find that this is due to the
following reasons. 1. You are using a Desktop Manager that is not
compatible with SETUP.EXE. If this is the case, run the Windows File
Manager and then Run, the Setup program as above from withing Program
Manager. Then you should see our ICON come up in a Window. Then, all
you have to do is copy the properties of this ICON into your Desktop Manager
and everything should run, nicely. Then make a new Item with these
properties.
2. Sometimes our distributors rearrange the way that
we organized our files on disk. We ask them to be very careful when doing
this because the Installation of any Windows Program is very Finicky and
not fault tolerant and needs files to be found in the order given in the
SETUP.INF file. But if you feel that the distributor has rearranged things
then all you have to do is the following manual installation.
INSTALLATION >>>>>>>>>>>>>>>>> MANUAL
FIRST: Copy all the diskettes you received to a subdir
on your hard drive called '\px999ion'.
get to a DOS prompt and type 'MD\PX999ION'
THEN TYPE ...
C>'CD\PX999ION'
C>COPY A:*.*
WHEN DONE: TYPE 'PETITION' and the files will self-extract in this
subdir.
REPEAT THE PROCESS FOR DISK2, BUT instead of typing 'PETITION' at the end,
type 'DISK2' and the second disk files will self extract. When they are all
self-extracted ....., go to Windows and pull down 'File',
THEN - IN WINDOWS - PULL DOWN THE 'FILE' MENU
LOOK DOWN AT THE BOTTOM OF THIS MENU AND CLICK ON ... 'RUN' COMMAND.
A DIALOG BOX POPS UP ASKING YOU THE FILE NAME TO RUN.
TYPE IN THIS BOX '\px999ion\setup'
THAT'S ABOUT IT. WINDOWS WILL AUTOMATICALLY INSTALL OUR PROGRAM.
NOW, JUST CLICK ON THE ICON AND THE PROGRAM WILL RUN.
IF YOU HAVE PROBLEMS GETTING THE VIDEO CLIPS TO RUN ...
................... >>>>>>>>>>>>>>>
YOU MUST INSTALL THE MULTI-MEDIA DRIVERS IF YOU WANT TO WATCH OUR FILM
CLIPS ON YOUR COMPUTER. IF YOU HAVE WINDOWS VER 3.1, THIS MAY NOT BE
NECESSARY. BUT WE FIND IN SOME CASES YOU HAVE TO DO THE FOLLOWING.
1. GOTO the control panel
2. Click on the 'Drivers' Icon
3. Click on 'ADD' a driver.
4. You will see a list of installed drivers.
5. If you don't see 'MCI AUTODESK ANIMATION DRIVER' ...
You must click on 'UNLISTED' TO ADD THE DRIVER
6. Fill in the dialog box with either 'C:\PETITION\mciaap.drv'
or the hard drive subdirectory where the files from disk1 & 2
were installed. example: 'C:\newdir\mciaap.drv'
This should debug the installation of this Multi-Media Magazine.