home *** CD-ROM | disk | FTP | other *** search
/ Monster Media 1993 #2 / Image.iso / lan / ntp116.zip / MHS.TXT next >
Text File  |  1993-08-02  |  2KB  |  48 lines

  1. This file contains some hints and suggestions to help you get NetPager
  2. to run with your MHS installation.
  3.  
  4. The most common message NetPager returns when trying to set it up to work with
  5. MHS is "Unable to locate valid MHS installation."  This can occur under a
  6. number of circumstances.
  7.  
  8. 1. You are not using an MHS version compatible with version 1.15.  If this is
  9.    your case, please upgrade your MHS and try again.
  10. 2. The MV environment variable is not set correctly.  See your MHS manual for
  11.    details on how to set this.
  12. 3. NetPager cannot determine its username.  Try setting the "USR" or "USER"
  13.    environment variables to the name of the user running NetPager
  14.    ex. SET USR=PAGER or SET USER=NETPAGER.
  15.  
  16. NetPager *requires* an installation of MHS for this support.  However, it
  17. can be "tricked" into thinking a valid installation is up and running.  To
  18. do this, you must create the following directories:
  19.  
  20. \MHS
  21. \MHS\MAIL
  22. \MHS\MAIL\SND
  23. \MHS\MAIL\USERS\PAGER\MHS
  24. \MHS\MAIL\PUBLIC
  25.  
  26. Give the NetPager user full access to \MHS.
  27.  
  28. A table file must be created in the \MHS\MAIL\PUBLIC directory with information
  29. regarding the MHS system.  Unfortunatly, I am unable to provide a means of
  30. doing this at present.  Future releases of NetPager will (hopefully) contain
  31. ways around this.  However, if you have an MHS installatio or access to one,
  32. you can create this file by temporarily re-configureing that hub and copying
  33. the file.
  34.  
  35. 1. Backup all MHS data (or rename the directory)
  36. 2. Re-install MHS from scratch
  37. 3. Setup MHS in the directory manager to "look" like the hub NetPager will
  38.    use.
  39. 4. Copy \MHS\MAIL\PUBLIC\NETDIR.TAB to the \MHS\MAIL\PUBLIC directory
  40.    NetPager will use.
  41. 5. Reload from backup or reconfigure MHS back to its original format.
  42.  
  43. *** Please note, the above information should only be considered ideas and
  44. thoughts.  It has not been tested but should work given the way NetPager
  45. operates.  NetPager will not be able to reply to mail messages since it places
  46. new mail in the /MHS/MAIL/SND directory and most mailers cannot read it from
  47. there.
  48.