home *** CD-ROM | disk | FTP | other *** search
/ Monster Media 1993 #2 / Image.iso / business / service.zip / MAINTX60.EXE / SERVICE / INTER.TXT < prev    next >
Text File  |  1993-06-22  |  7KB  |  197 lines

  1.  
  2.                            MS-DOS [TM] 6.0 users:
  3.  
  4. MS-DOS [TM] 6.0 comes bundled with a powerful mini-Lan.  In C:\DOS, you 
  5. should observe these files:
  6.                                 INTERLNK.EXE  
  7.                                 INTERSVR.EXE  
  8.  
  9. When used on two computers through a null modem, these files provide a 
  10. Client-Server capability that attaches to the Client the disk drives and 
  11. printers of the Server.  Once you establish the Server's logical table in 
  12. INTERSVR.EXE, those drives and printers are accessed from the Client as 
  13. though they were resident in the Client.
  14.  
  15. First, enter this command in CONFIG.SYS:
  16.  
  17.                          DEVICE=C:\DOS\INTERLNK.EXE
  18.   
  19.                                      or 
  20.  
  21.                        DEVICEHIGH=C:\DOS\INTERLNK.EXE
  22.  
  23. If you have the extra Expanded or Extended memory, you would use the second 
  24. command; otherwise, use the first.  In any case, install that command in both 
  25. computers, then reboot them.  Even though these routines come with MS-DOS 
  26. [TM] 6.0, they appear to be functional in any other version of DOS. 
  27.  
  28. To understand the options of INTERSVR.EXE, enter this command in DOS:
  29.  
  30.                                  INTERSVR ?  
  31.  
  32. After you have entered that command, you will see this text:
  33.  
  34. ============================================================================
  35. Provides serial or parallel file transfer and printing capabilities via     |
  36. redirected drives.                                                          |
  37.                                                                             |
  38. intersvr [drive:[...]] [/X=drive:[...]] [/LPT[:][n | address]]          
  39.     [/COM[:][n | address]] [/baud:rate] [/b]                            
  40.                                                                         
  41.     drive:        Specifies the drive(s) to redirect                    
  42.                   (by default, all drives are redirected).              
  43.     /X=drive:     Specifies the drive(s) to exclude.                    
  44.     /LPT[n]       Specifies a port to scan. (/LPT scans all LPT ports). 
  45.     /LPT[address] Specifies a port address to scan.                     
  46.     /COM[n]       Specifies a port to scan. (/COM scans all COM ports). 
  47.     /COM[address] Specifies a port address to scan.                     
  48.     /BAUD:rate    Set a maximum serial baud rate.                       
  49.     /B            Displays the Interlnk server screen in black and white.   
  50.     /V            Prevents conflicts with a computer's timer.  Specify this 
  51.                   switch if you have a serial connection between computers and
  52.                   one of them stops running when you use Interlnk.      
  53.                                                                         
  54. INTERSVR /RCOPY                                                         
  55.                                                                             |
  56. Copies Interlnk files from one computer to another, provided that the       |
  57. computer's serial ports are connected with a 7-wire null-modem cable.       |
  58. ============================================================================
  59.  
  60.  
  61.  
  62.                      ===== Establishing the Server =====
  63.  
  64. In DOS, on the computer that you wish to operate as the Server, please enter:
  65.  
  66.                                   INTERSVR 
  67.  
  68. This command will bring in the defaults of INTERSVR.EXE.  To see the list of 
  69. its available options, you would enter:
  70.  
  71.                                  INTERSVR ?  
  72.  
  73. After that, you would enter at the command line your specific options.  One 
  74. example could be:
  75.                           INTERSVR /COM2  D: E: F:
  76.  
  77. Once INTERSVR.EXE is successfully installed on the Server, you will see the 
  78. menu for the Microsoft Interlnk Server, awaiting connection from the Client.
  79.  
  80.  
  81.                      ===== Establishing the Client =====
  82.  
  83.  
  84. Once you have established the Server, then go to the other computer.  On this 
  85. second computer, please enter:
  86.  
  87.                                   INTERLNK
  88.  
  89. The Client seeks acknowledgement from the Server through the Null Modem.  
  90. Depending on how you established the Server, the Client would begin scanning 
  91. for the Server, then report back to you the "virtual devices" it had created 
  92. from the logical devices of the two computers. 
  93.  
  94. One possible Client response could be:
  95.  
  96. ============================================================================
  97.     Scanning                                                                |
  98.                                                                             |
  99.     Port=COM1                                                               | 
  100.  
  101.     This Computer        Other Computer
  102.       (Client)              (Server)
  103.     -------------   -------------------------
  104.       G:    equals    D: (133Mb) MS-DOS_VOL2 
  105.       H:    equals    E: (133Mb) MS-DOS_VOL3               
  106.       I:    equals    F: (135Mb) MS-DOS_VOL4                                |
  107.       LPT2: equals    LPT1:                                                 |
  108.       LPT3: equals    LPT2:                                                 |
  109. ============================================================================
  110.  
  111. Once you see this acknowledgement in the Client from the Server, you can then 
  112. navigate in the Client as though you were in the Server.  In this example if 
  113. you enter virtual drive 'G:' in the Client, you would then be in the logical 
  114. drive "D:" of the Server.  Any DOS commands, such as "COPY" or "DIR", that 
  115. you enter at this point in "G:" would work as before.  Once in "G:", you can 
  116. execute any programs within that virtual drive. 
  117.  
  118.  
  119.              ===== RS232 Null Modem Cable Pin Connections =====
  120.  
  121.  
  122.  
  123. 9 pin to 9 pin:
  124.  
  125. 5 to 5  Ground
  126. 3 to 2  Receive data
  127. 2 to 3  Transmit data
  128. 8 to 7  Request to send
  129. 7 to 8  Clear to send
  130. 4 to 6  Data set ready
  131. 6 to 4  Data terminal ready
  132.                               
  133.  
  134. 25 pin to 25 pin:       
  135.  
  136. 7 to 7   Ground
  137. 2 to 3   Receive data
  138. 3 to 2   Transmit data
  139. 5 to 4   Request to send
  140. 4 to 5   Clear to send
  141. 20 to 6  Data set ready
  142. 6 to 20  Data terminal ready
  143.  
  144.  
  145. 9 pin to 25 pin:
  146.  
  147. 5 to 7  Ground
  148. 3 to 3  Receive data
  149. 2 to 2  Transmit data
  150. 8 to 4  Request to send
  151. 7 to 5  Clear to send
  152. 4 to 6  Data set ready
  153. 6 to 20 Data terminal ready
  154.                               
  155.  
  156.  
  157.           ===== Bidirectional Parallel Cable Pin Connections =====
  158.                              [DB25, both males]
  159.  
  160. Client:              Server:
  161.  
  162. 2        to          15
  163.  
  164. 3        to          13
  165.  
  166. 4        to         12
  167.  
  168. 5        to         10
  169.  
  170. 6        to         11
  171.  
  172. 15       to         2
  173.  
  174. 13       to         3
  175.  
  176. 12       to         4
  177.  
  178. 10       to         5
  179.  
  180. 11       to         6
  181.  
  182. 25       to        25   Ground
  183.  
  184.  
  185.  
  186.  
  187.  
  188.  
  189.  
  190.  
  191. MS-DOS [TM], INTERLNK.EXE, INTERSVR.EXE, and Microsoft Interlnk Server are 
  192. registered trademarks of Microsoft Corporation.
  193.  
  194. Any cables that you create using the above Cable Pin Connections are used at 
  195. your risk.  
  196.  
  197.