home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Monster Media 1993 #1
/
MONSTER.ISO
/
cad
/
kurta.txt
< prev
next >
Wrap
Text File
|
1993-05-11
|
2KB
|
51 lines
Autodesk Product Support March 30, 1993
Configuring AutoCAD(R) and the Kurta IS/ONE
1. AutoCAD Release 10, 11, and 12c2 for the 386 and AutoCAD Release 12c1
for Windows:
a) With the digitizer turned off, confirm that the dip-switch
settings on the back of the tablet match the default settings
listed below.
* b) Turn on the digitizer and select program key P2.
c) Configure AutoCAD.
For Release 12c2 for the 386 and for Release 12c1 for Windows,
configure for the Kurta IS/ONE driver.
For Release 10 and 11 for the 386, configure for the Kurta
Series 1 driver.
2. AutoCAD Release 12 and 12c1 for the 386:
a) With the digitizer turned off, confirm that the dip-switch
settings on the back of the tablet match the default settings
listed below.
* b) Turn on the digitizer and select program key P4.
c) Configure AutoCAD for the Kurta IS/ONE driver.
* Note: The program key setting must be selected each time the table is
turned on.
Factory default switch settings for the Kurta IS/ONE.
Switch A Switch B Switch C Tablet Size
0001 1110 0010 1011 0100 0010 for the 12 x 12
0001 1110 0010 1011 0100 0001 for the 8.5 x 12
0001 1110 0010 1011 0100 0011 for the 12 x 17
Factory default settings for program keys P1 - P5.
P-Key Emulation Switch A Switch B Switch C
P1 Current setting ** ** **
P2 Kurta Series I 1011 1110 0101 0011 0100 0010
P3 GTCO Bitpad 1 0001 1110 0010 1011 0100 0010
P4 Kurta Series II 0001 1110 0101 0011 1100 0010
P5 MS Mouse 0001 0000 0000 0000 0000 0111
** Note: Program key P1 switches the digitizer into the communication
mode specified by the dip-switch settings on the back of the tablet.
See the Kurta IS/ONE product manual for additional information on
communication modes.
Autodesk Trademarks
AutoCAD is registered in the U.S. Patent and Trademark Office by
Autodesk, Inc.