home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Monster Media 1994 #1
/
monster.zip
/
monster
/
WIN_NT
/
PT4B10.ZIP
/
PTERM.TXT
< prev
next >
Wrap
Text File
|
1994-01-02
|
24KB
|
535 lines
P T E R M
Paragon Terminal Application
for Windows NT
Version 04b.p10
1, January 1994
What's Going on Here?
=====================
This is a beta of Paragon Terminal Application for Windows NT. What's
so great about PTERM? Not much yet, but here is a list of features
available so far:
o Fully threaded, native Win32 application
o Auto Zmodem download/upload with crash recovery and
auto-renaming of incoming files which already exist.
o Fast(er) ANSI (including color!) terminal emulation
o Console based for speed
o TELNET support
The other valuable feature of PTERM is that as far as I know it is
the only Zmodem capable native, multi-threaded Win32 terminal
application available. It won't be for long, but for now...
Some glaring omissions:
o No Dialer!?!?!
o No annoying "register me now, or die" messages and
purposefully broken features.
o Many other things which you will likely go insane without (but
hang in there, it is my intention to evolve PTERM).
*** Note: Please read the file RELNOTES.TXT before using PTerm. It
contains important information on known bugs and
limitations in this release of PTerm.
About This Manual!
==================
This is the sorriest excuse for manual yet -- but I am anxious to
get this PTerm out to everyone, I'm not a tech-writer, and PTerm
isn't all that compilcated. So if after reading this text you have
the feeling that it was a poorly organized jumble of information,
well, your feeling is correct. What I do hope this manual will do
for you is to give you just enough information to get started using
PTerm. If it doesn't, please email me and I will be happy to answer
your questions (see my addresses below).
Why Would You Do Such a Thing?
==============================
Some months back, I was asked to beta test a C++ based,
multi-platform communications library from a company called Lookout
Mountain Software (William Herrera, owner/author, BBS 719-545-8572).
The best method I could think of for testing this package was to use
it as the core of a terminal application -- and PTERM was born.
William has been extremely sensitive to the problems I found and
enhancements I suggested, and should be commended for authoring such
a stable and comprehensive communications library, which is available
for DOS, Windows, OS/2 and Windows NT. All of the file transfer
protocol code (Zmodem/Ymodem/Xmodem) is Williams, and he has done an
excellent job implementing them (sealink and telink are also included
in the communications library, but not in PTERM -- Xmodem and Ymodem
will be available in the next release of PTERM).
I Didn't Do It, I Swear!
========================
Every precaution has been taken to ensure the safe operation of
PTERM in your Windows NT system. But, come'on, this copy of PTERM
in beta, and I'm warning you of such, so obviously I cannot be
held responsible for any damage done to your system (or psyche) by
PTERM or any interaction involving PTERM. So all I can say is "I
didn't do it!", so don't blame me!
What Do I Need To Use PTerm?
============================
You need an Intel based (Intel Inside sticker optional) PC running
Windows NT (March '93 build or later), with at least one serial port
and a modem attached to that port. Actually, if you just want to use
PTerm for TELNET you won't even need a serial port. However, I do
not recommend using PTerm for any but the simplist of tasks while
telneting.
If someone would like to send me a MIPS R4400 or DEC Alpha AXP, I
will be glad to get PTERM up on those platforms as well <grin>.
Actually, I have had a number of requests for PTerm on the Alpha
(surprisingly none for MIPS). My standard answer is that I don't
have an Alpha machine and that since PTerm is based largely on a
commercial library, I am not in a position to give the source to
someone with an Alpha. This is too bad, but it will have to do for
now...
Alright, What Do You Want For This?
===================================
The list of things I want would be much too large to include in this
document, so you will have to settle for what I need.
What I need, from you, is the following:
o Bug reports (there should be plenty)
o Suggestions (again, no shortage expected here either)
So, please, please inundate me with this information, I promise I
will consider anything submitted (but nothing not submitted).
Whereami?
=========
I can be reached via internet mail at:
roncox@indirect.com
rjc@infograph.com
urjc!rjc@pcg.com
FIDOnet people, try netmail to UUCP at 1:1/31, first line of the
message body:
To: roncox@indirect.com
I plan on finding a reliable FIDOnet system here in town, and when I
do I will post my FIDOnet address for netmail.
You can reach me on Compuserve at:
71722,3175
For slowest response, choose snail-mail:
Ron Cox
ATTN: PTERM
Paragon Consulting Group
4212 West Cactus STE 1110-229
Phoenix, AZ 85029
I'm Getting Sleeeepy...
=======================
I know, I know -- I will make this easy on you (and me) and keep
things real short.
First, a couple of command line switches have been added to PTerm.
They are:
-s
Go straight into the setup dialog. When PTerm is first run
on your system, it will not find a PTERM.INI file to read
configuration from. If you have a COM1, this is no problem
since PTerm will default to COM1 and run, at which point
you can press ALT-S to run through the setup (see below).
However, if you have no COM1, PTerm will complain and then
exit. Passing the '-s' option bypasses the check and lets
you configure PTerm straight away.
-ifile
Since PTerm keeps its setup data in an ini file, I needed
some method of allowing multiple copies of PTerm to run.
PTerm normally defaults to looking for PTERM.INI in the
\WINNT directory. By passing a '-ifile' switch, you can
change which ini file PTerm will use. For instance, if
PTERM.INI sets up PTerm for COM1, and you also want to run
PTerm on COM2, you can copy PTERM.INI to PTERM2.INI and run
PTerm as such:
pterm -s -ipterm2.ini
Make sure the -s is first on the command line!
Now, go into the setup and change the comport to COM2,
click Ok, then Save. Now you can use the above command
line (removing the -s) to invoke PTerm on COM2.
Note, the ini files MUST be in the \winnt directory, and
you must pass only the name (not the path) with the '-i'
switch.
As is obvious from the discussion above, PTerm no longer uses
environment variables for configuration! So you can remove them all
from your PT.CMD (or master environment).
PTerm configuration is now done through a set of dialog boxes. You
get to the main setup menu by pressing ALT-S. From here you can
choose to setup "Communications", "Modem Setup", "Macros", or "File
Transfers".
At the bottom of the main setup menu are three buttons:
Save - Save any changes made to the setup.
Apply - Apply the changes made but do not save them
Done - Don't apply or save any changes made
All of the options in these setup dialogs are self explanatory (I
think), so I am not going to spend alot of time going over them. If
you have questions, just drop me some email and I will be happy to
help!
The one area I would like to discuss is the "Macros". These are
literal strings which PTerm sends out when the appropriate key is
pressed (F1-F12) -- PTerm does NO fancy substitutions or expansions
on these these strings except to append a carriage return to them
before sending them out to the modem. The macro capability was added
out of guilt for not adding a dialer, and as such is useful for
defining upto 12 dial strings.
Hitting ALT-C will show you the current settings as well as a list
of key commands (this is the same information which appears when
PTerm is first run).
PTERM can be placed in (and executed from) the program manager, and
even has its own embedded icon (just like a real Windows program!).
When using a batch enabled file transfer protocol (Zmodem), the file
selection dialog box which pops up for an upload will allow you to
select multiple files from any one directory, using the standard
Windows mouse/key combinations for multi-select lists (i.e. CTRL-CLICK
adds a file to the list, and try SHIFT-CLICK to extend the list to the
current point).
For batch uploading, if PTERM finds a file called FILESTO.UPL in the
current directory (the directory you were in when you started PTERM),
it expects this file to contain a list of files (full paths) to
upload, and will attempt to do so. If PTERM finds this file, it will
go straight to uploading, bypassing the file selection dialog.
I am sure I have forgotten a whole bunch of information here, but
this should be enough to get you off the ground.
Can I Run it Now?
=================
Well... Ok...
But, "Don't touch it, you'll break it..." (U.S. West T.V. ad)
For those of you who have been spoiled all their lives by a dialer and
do not know how to do it manually, if you have a modem which supports
the Hayes command set (are there any which don't?) you can dial a
number from PTERM like so:
atdt555-5555 Tone dial 555-5555
atdp555-5555 Pulse dial 555-5555 (yuck!)
On my USR Sportster, the command
a/
executes the last command entered, and can be used to redial.
Again, you can add upto 12 dial strings as macros if you like.
PTerm now has text capture. It is toggled by pressing ALT-L. When
activated, PTerm will bring up a standard Windows dialog box for
getting a file name. Enter a valid file path and click Ok. If you
are currently capturing text, the title bar of PTerm will have the
word "Capturing" at the end of it. Press ALT-L to close the capture
file. If you exit PTerm with an open capture file, PTerm will close
it for you before terminating.
PTerm pretty much stores everything except ANSI escape sequences in
the capture file. Also, if you use a file which already exists,
PTerm will append captured text to that file without disturbing what
was already there.
Some Closing Thoughts
=====================
Its not much, but there it is. Please let me know of any problems or
suggestions for enhancements you have.
On my 386-33, running the NT GA (with USP1 installed), I have
experienced excellent transfer speeds using the Zmodem in PTERM. On
text files, at 14.4K with .v42bis (57.6K maximum), I have seen 3800+
cps. The same setup on compressed files yields 1650 cps and higher.
The NT serial driver is absolutely flawless in its support of
FIFO's. Make sure you have a serial card with a 16550AFN FIFO on it
and you will get much better file transfer results!
Another facet of the serial driver which operates well is RTS/CTS
flow control. This is always turned on when PTERM runs, later it will
be configurable. During heavy multi-tasking, RTS/CTS keeps the modem
under control, holding it off when the serial buffer gets full. This
has worked flawlessly.
Ron Cox
Paragon Consulting Group
Special Thanks
==============
To the following, I give special thanks:
Dale Ross for being a sort of liason between Microsoft and myself
to get some nasty bugs fixed. Not to mention the extensive
testing he has done for me (also the other members of Team PTerm
<grin> -- Bob Chronister, Michael Rod, Stephen Purpura, and
Randell Kennedy)!
Greg Kochaniak for his *extensive* help in getting PTERM's telnet
support to be even as useful as it is!
To ALL the other people (especially on internet) who emailed me
with suggestions, and a couple even sent source code.
Thanks!
Technically Speaking
====================
Thought you were done, didn't you? Well, if you could care less about
some of the technical details of PTERM, you are, else read on.
As mentioned, PTERM makes full use of multi-threading. This stuff is a
trip. It can make programming much more interesting (and in many cases
greatly simplifies things!).
There are 7 threads of execution, 6 secondary and the 1 main thread
which all Win32 applications start with.
The first two threads of interest are in Williams communications
library. One is responsible for taking characters in from the serial
port (actually, the serial driver) and placing them in a queue created
by the library (the input queue) which is made visible to the user
code. The second takes characters from another queue and writes them
to the serial port (driver). The user code is responsible for placing
characters to be sent out the port into this output queue, and does so
through a set of 'Send' member functions.
Also, both of Williams threads use overlapping (asynchronous) I/O,
resulting in an even more efficient set up.
Now for the threads I spawn. They are as follows:
o Input thread
Because I did not want to muck with the input queue being
managed by the communications library, I created another layer.
My input thread simply waits for characters to appear in the
main input queue, and block copies them into a local queue used
by the display thread (below). If there are no characters
waiting in the main input queue, this thread sleeps until there
is (in the discussions which follow, this thread will be
referred to as 'my input thread', to differentiate it from the
main input thread operating in the library). It may be that I
can increase PTERM's efficiency slightly by removing this layer
and having the display thread pull characters directly from the
library managed input queue -- something I will consider.
o Display thread
This thread is solely responsible for removing characters from
the local input queue (managed above) and deciding what to do
with them. For instance, if the beginning of an ANSI escape
sequence is detected this thread passes control to a function
whose job it is to interpret the sequence (note: the ANSI code
still executes within the display thread, no other thread has
been created). One of the other jobs of the display thread is
to optimize the output into the console window. This is done in
a very simplistic manner. In the absence of ANSI escape
sequences, the display thread will accumulate characters from
the local input queue into a buffer -- up to 80. When the
limit of 80 has been reached, or a special sequence is
detected, the display thread blasts the buffer to the screen in
a single call to WriteFile(). This is MUCH more efficient than
calling something like putch() for each single character.
However, at slow speeds (1200 and 2400 baud), it takes a
noticeable amount of time to accumulate 80 characters, and
this is the reason for the choppy display at these speeds. If
you set the port to anything less than 9600 baud, PTERM reduces
this 'blast' count to 8 characters, producing a smoother
display.
As if this wasn't enough, the display thread has one more job to
perform. It watches for the tell-tale sequence of characters
which signal the host is preparing for a Zmodem upload or
download. If this sequence is found, it starts the appropriate
code.
If there are no characters in the local input queue, the display
thread sleeps until there are.
o User thread
The user threads job is pretty easy. If the user hits a key,
decide what to do with it. Typically the key will be sent right
out the port. If it is a control key sequence (like ALT-X), then
the user thread executes the code appropriate for that key. This
thread blocks on the keyboard, and as such sleeps when there are
no characters available.
o Main thread
The main thread is the first thread which executes (starting in
main()). It initializes the port and other things, starts up the
three threads above, and then goes to sleep waiting for all
three of the threads above to terminate. At this point it wakes
up and calls ExitProcess(), ending PTERM.
Them's the threads, and a nice bunch of threads they are. However, if
there is one thing I quickly learned from spawning threads all over
the place, its that synchronization thingy.
Here's the scenario: My input thread pulls characters from the main
input queue to place in the local input queue. Fair enough. So, I
start a Zmodem download. Boom! Of course, the Zmodem download code
also wants to pull characters from the main input queue, so my thread
fights with the Zmodem code. Remember, the Zmodem code is run as part
of the display thread. So my input thread grabs some characters, then
the Zmodem code [running in the display thread] grabs some
characters, and so on. Zmodem will end up missing a bunch of
characters it expected to see, and my input thread grab some
characters from the transfer which the display thread will finally
get and try to display. A mess...
So, I need to find a way to synchronize the two threads. When Zmodem
wants control of the main input queue, it needs to 'ask' for control
from my input thread. Well, it really isn't as formal as all that.
Just before my input thread grabs characters from the main input
queue, it waits on a semaphore. Simplified, a semaphore is just an
object which keeps count of how many threads have asked for control
of it. When its count is 0, access is granted to the waiting thread.
When a thread gets access to it, the semaphores count is incremented.
Any other thread which waits on it goes to sleep until the semaphores
count becomes 0 again. The count is decremented when a thread
explicitly releases a semaphore, thus allowing another thread to gain
access (this can get complicated when there are more than 2 threads).
Ok, where were we? Oh, yes, my input thread waits on this semaphore
gadget. Typically, it gets control instantly and drops into the main
body of its code where it grabs characters from the main input queue
and stuffs them in the local queue the display thread uses. Once it
has transferred some characters, it releases the semaphore (and gives
up the rest of its time slice). Its during the time between releasing
the semaphore and waiting on it again that the file transfer code
must act.
The first line of code for a file transfer waits on the same
semaphore. As soon as my input thread releases the semaphore, the file
transfer code gets and holds access to it until the transfer is
completed, thus preventing my input thread from mucking with the main
input queue during the transfer. Whew!
Being this is my first foray into threads, I am very interested to
find out if my code breaks on a multi-processor machine. Does my code
work now because it takes advantage of the synchronous behavior of a
single processor? Interesting stuff, but I forgot to pick up my
Sequent 16 processor monster-box at the grocery store the other day,
so I suppose the answer will have to wait...
I found one other interesting thing about Windows NT -- it seems to
like to write data to the disk right away. Generally, this is a good
thing, keeps your data safe. However, with Zmodem code writing 1K
blocks to disk every .7 seconds or so (at 1650 cps), the disk access
began to affect the performance of the download. The solution was
easy, I just used a call to setvbuf() to create a memory buffer. The
size I chose is 64K. So the system (C runtime) will accumulate 64K
bytes from the fwrite()'s before writing to disk. Believe it or not,
NT can actually write a 64K block to disk as quickly as a 1K block --
difference is, now Zmodem only hits the disk one a minute or so (at
1650 cps). Works great. Notice I said I made a 64K buffer. You 16 bit
guys probably have (as I did) the signed integer maximum value
memorized, 32K right? Well, under NT, a signed integer is 2^31, for a
maximum [signed] value of 2 GB. So 64K was small compared to what
I could make it.
The file access areas of the transfer protocols are excellent
candidates for overlapped I/O, probably doing away with the need for a
write buffer. However, since Williams library is meant to be
multi-platform, it is best to keep it as generic as possible. But,
it is C++, and with proper inheritance the function responsible for
writing data to disk could be overloaded (and William has isolated
this operation for easy overloading!). A possible future enhancement
to PTERM.
One more technical note: PTERM does not change its base priority
class, but it does manipulate the priority of several of its threads
relative to the priority class it is started at. What? Ok, if you run
PTERM from the command line like so:
start pterm.exe
then PTERM gets a base priority class of NORMAL. Using these commands:
start /idle pterm.exe
start /normal pterm.exe
start /high pterm.exe
start /realtime pterm.exe
I strongly recommend leaving it at NORMAL priority (by using the
/normal switch, or not giving a priority at all). You are, of course,
free to experiment.
Well, the rest of PTERM is plain and boring (as if the preceding was
not!). So not much else to say. Any specific questions? Feel free to
contact me!