home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Monster Media 1994 #1
/
monster.zip
/
monster
/
RENEGADE
/
RG0102.ZIP
/
WHATSNEW.12
< prev
Wrap
Text File
|
1994-01-02
|
15KB
|
362 lines
603) %G in ACTIONS.LST will now return HIS or HER based on the sender's
gender.
604) %H in ACTIONS.LST will now return HIM or HER based on the sender's
gender.
605) Renegade now logs user info changes such as handle, real name,
phone number, address, etc.
606) Renegade's QWK system should now report when the maximum number
of messages per base has been reached.
607) Renegade's QWK will report when the maximum total number of messages
downloadable has been reached, AND abort message gathering and proceed
to archiving.
608) Renegade now allows sysops to send a default new user message through
email. If NEWLET.ASC exists when a user applies, it is imported and
sent to that user to read in email. It is simply a text file
with the following format:
[FROM] 1 line
[SUBJECT] 1 line
[MESSAGE TEXT] Unlimited lines
Any replies to the message are directed to the same person that
new user applications are sent to.
609) Renegade now erases 'Scanning BASENAME ...' prompts in the file
and message areas, and uses ANSI and AVATAR codes to erase them
faster.
610) Upon selecting a terminal emulation, the user is now prompted
"Would you like this to be auto-detected in the future? " If
yes, the user's terminal emulation will not be saved, and will
be set at login by the auto-detection.
611) Renegade now fully supports the separate upload paths definable
in file bases. Essentially, each file base has two directories.
Both can be downloaded from transparently. However, all MOVES
and UPLOADS will ONLY go to the upload path. Thus, a person
with a CD-ROM can have a path on the CD-ROM for downloads AND
allow uploads to that base to be stored on a hard drive, rather
than having separate CD-ROM bases for everything.
612) (P) while editing files now goes backwards through the files.
613) New cmdkeys:
$+ Increases a user's credit ( Increases balance )
$- Increases a user's debit ( Decreases balance )
The option field contains the amount.
614) If an archiver's compression line is blank, Renegade will now
automatically assume it was compressed. This is for people
using things like THDPRO to scan GIFs who also want recompression
flagged on. Before, it would delete any uploaded GIFs since there
was no way to compress them.
615) The prompt while listing files is now a menu; FILEP.MNU. Added are
several special commandkeys for that menu:
L1 - Continue listing
L2 - Quit listing
L3 - Next file base
L4 - Toggle newscan of that base
*** YOU ARE HEREBY WARNED:
YOU ARE STRONGLY ADVISED NOT TO MAKE CALLS TO OTHER MENUS FROM
THIS MENU. IF YOU DO, DO NOT MAIL ME ABOUT "ERROR 202s".
616) New cmdkeys NW set the listed "activity" on the node list to
the optional string. i.e. "NW;Futzing around" would display
"Futzing around" under "Activity"
617) Smarter input - when selecting message bases or file bases
from a menu prompt, Renegade will "hit return" when the user
enters the maximum number of digits, and not before. i.e.
if you have 20 file bases, as soon as the user enters 2 digits,
it hits return. If you have 43,000 file bases, it won't hit
return until he enters 5 digits.
618) The prompt while reading messages is now a menu; READP.MNU. Added are
several special commandkeys for that menu:
RA - Read again
R- - Read previous
RM - Move message
RX - Extract message
RE - Edit message Only SysOps or original poster
RR - Reply to message
RI - Ignore remaining messages and set high pointer
RB - Back in thread
RF - Forward in thread
RC - Continuous reading
RD - Delete message
RH - Set highread pointer
RG - Goto next base
RQ - Quit reading
RL - List messages
RU - Edit user of last message read
RT - Toggle newscan of message base
RN - Next message
R# - MUST be present to allow users to jump to a certain
message by typing in its number!
*** YOU ARE HEREBY WARNED:
YOU ARE STRONGLY ADVISED NOT TO MAKE CALLS TO OTHER MENUS FROM
THIS MENU. IF YOU DO, DO NOT MAIL ME ABOUT "ERROR 202s".
619) Renemail's fastpurge should work across disks.
620) The FB (Add to batch) and FD (download) cmdkeys can now
have an optional file name specified. It must be a file
in the file areas; it simply does not prompt them for
a file name.
621) The OO (sysop status) cmdkeys have been removed. They can
(and should, obviously) be implemented with the "OO" ACS
functions tied in with either -L or -F cmdkeys.
622) On local QWK downloads (attended or otherwise), if a .QWK
already exists, Renegade will rename the new one to .QWA,
then .QWB, then .QWC and so on up to .QWZ. If it is an
attended download, the local user will be asked if he wants
to replace the current .QWK.
623) Renegade will now purge the temp\up directory before batch
uploads.
624) File points are only displayed if the file points system is on.
625) Renegade's use of pause prompts has changed, and Yes, No, Continuous
is now available everywhere. The problem of permanently toggling
pausing off has also been corrected.
626) Huge improvement in speed of adding new users.
627) User.idx format changed back to text based to speed up partial
string matches.
628) In file bases marked "CD-ROM", Renegade will now copy files off
the CD-ROM and into the TEMP\CD directory before a batch download.
The files will be purged as they are downloaded, or when the user
logs off.
629) Renemail now only scans message bases that have outbound echomail.
630) Added new -A absolute scan option to thwart #629.
631) The "problem" with blank expiration levels is corrected by
redoing option "I" for that level, and hitting space.
632) Renegade now reports "RIP" in DOOR.SYS files.
633) Renegade now internally supports Digiboard intelligent communications
cards using the Int 14h DOS driver. This allows you to run 8 or
more copies of Renegade off of one machine, and FAST. Support is
toggled on in the node setup section.
634) Old infoform answers are now replaced with new infoform answers if
the user fills the infoform out again.
635) System Config option "M" is now credit system config. Note that
credit charge values can be negative to REWARD credits for an
action.
636) Filepoints have been removed and replaced with the credit system.
Notes:
1) Use optional FP2CR to convert file points to credits.
2) "OD" cmdkeys are gone
3) The P acs is gone
4) The @U mci is gone
637) File "NOCREDS.XXX" is displayed to users who don't have enough
credits to meet the per minute charges when logging on.
638) The NS cmdkeys will now accept a node argument of 0 (ZERO) which
will send the message to ALL active nodes.
639) Lines with expanded MCI codes are NO LONGER limited to 255 characters
in externally displayed files. i.e. before, if you had a file with
a 250 character line and an mci that translated to 50 characters, you
lost 45 characters at the end. No more.
640) Option "D" in the credit config will allow Renegade to give users
who don't have enough credits for online time a certain amount of
free time at logon. This is ideal for allowing users to logon
and email the sysop or download a subscription form.
641) The credit system, when charging per minute, will dynamically
adjust the user's remaining time. If the user is running out
of credits, his time will be cut, and he will be notified. If
the user suddenly gains credits, his time will be increased
back to it's original limit. Note that increasing his time
manually with the sysop functions will not work, as the system
will counter the adjustments - you must change the user's
credits.
642) Users may no longer use the archive menu extraction command
on files they don't have access to download.
643) Renegade now supports random selection (.RIP, .RI1...RI9) of
RIP files.
644) A completely new, RIP compatible MCI system is in place. See
MCI.DOC for details. It consists of the % character followed
by two alphanumeric characters, case insensitive. You need
to find and use Kerry Sander's MCIFIX utility to convert
to this mci set.
645) MCI padding: #xx following an MCI code will now pad that MCI
code out to xx places. Example:
%UN#50 would pad the user name out to 50 spaces.
It will also chop mci's to fit the space if necessary.
646) The newuser info screen/menu has been replaced by NEWINFO.MNU.
Global commands do not work here.
IMPORTANT: Keep in mind that a user does NOT have a user
number at this menu. Things requiring a user number like
posting messages, answering questionnaires, etc, will not
have the desired result.
647) Any door drop command with a blank option line will simply
create the specified drop file without shelling to dos.
648) Renegade will now copy single files off a CD-ROM for download,
and should figure out whether a file in a file area is on
a CD-ROM or a hard drive in the upload path.
649) Reread while viewing outbound email now works as well as
a new 'previous' command.
650) When exiting for a door, if a node's activity description
is a custom one, Renegade will NOT change the activity
to reflect "out in a door"; it will have to be done manually
with menus.
651) Setting DL/UL DLK/ULK ratios to ZERO now disables them for
that particular security level.
652) New path: RAM drive/multinode path is for the multinode files,
and should be used to put them in the fastest drive on your
system; preferably a RAM drive.
653) ACTIONS.LST should be moved to your MISC directory.
Boy, I can't wait to hear the "bug reports" on this one.
654) Renegade will now not allow people to upload more posts in a
.REP packet than they are allowed to post in a day.
655) ENTER is now a valid option for a protocol key.
656) Renemail will now properly recognize incoming file attaches,
and allow the user to download them.
657) Renegade now allows a "network rep acs" to be defined in the
offline mail configuration. This will allow users meeting
that ACS to upload network .rep packets.
658) Renegade will attempt to load RENEGADE.OVR from the RAM drive
path if it can't find it in the default directory.
659) 21600, 24000, 26600, and 28800 are now supported.
660) The infoform language can now test input multiple times. ie:
Pick 1,2, or 3: *
;I1,ONE
;I2,TWO
;I3,THREE
Would branch correctly.
661) Two new cmdkeys: -Y;QUESTION;NO RESPONSE
-N;QUESTION;YES RESPONSE
Both cmdkeys ask "QUESTION" as a yes or no question.
-Y will continue execution of the menu key if the user
hits "Y", and display "NO RESPONSE" if the user hits "N"
-N will continue execution of the menu key if the user
hits "N", and display "YES RESPONSE" if the user hits "Y"
They work basically like -$ does.
662) Two new functional MCI codes:
%C - Com port address
%E - Com port IRQ
These are defined in the NODE configuration section and
are ONLY used for MCI codes. They have no FUNCTIONAL
usage; since Renegade uses a Fossil or Digiboard driver.
These are for people running non-standard serial ports
with DSZ and the like for easy protocol definitions.
663) Total list of new MCI codes introduced with the new system:
User defined answer #1 %D1
User defined answer #2 %D2
User defined answer #3 %D3
Date of subscription expiration %ED
U/D k ratio %KR
Minutes online so far %MO
U/D ratio %NR
User's terminal emulation %O1
User's screen size %O2
User's screen clearing toggle %O3
User's f/s editor toggle %O4
User's screen pausing toggle %O5
User's hotkey toggle %O6
User's password %PW
Batch Queue - Download # %QD
Batch Queue - Upload # %QU
SysOp defined category #1 %S1
SysOp defined category #2 %S2
SysOp defined category #3 %S3
User's sex (Male/Female) %SX
User's age %UA
User's birthdate %UB
User's calls today %UC
User number %UU
Renegade version %VR
664) A user can NEVER even try to eject a sysop now.
665) Teleconferencing should be sped up a good bit thanks
to some structure modifications.
666) <- EEK!
Renegade will now read ACTIONS.LST off the RAM path if
it exists there.
667) The Px ACS command now returns true if the user's account
balance is above x.
668) FILEP and READP menus cannot call other menus with -/ -\ or -^.
12-25 released.
669) Renegade will do partial string matching in Teleconf functions
such as /P. Example:
Old:
/p THE SYSOP Hello!
New:
/p sys Hello!