home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Monster Media 1994 #1
/
monster.zip
/
monster
/
MODEM
/
CISSETUP.ZIP
/
CISSETUP.SCR
Wrap
Text File
|
1994-01-08
|
88KB
|
1,598 lines
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; These are the only comments in the original script: |
; |
; QuickLearn Script generated at 11:21:17 07-30-93 |
; May require editing before use. |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
;
; COMMENTS INSERTED BY Bruce K. Anderson 01-09-94
; CIS [75300,2025]
;
; The purpose of this SCRIPT is to set the TERMINAL functions within
; CompuServe to work with the QMQATE mail program. These comments
; where generated for reference, and to know that the
; TERMINAL settings should be in case they should get changed.
;
; To involk this script, it is necessary to be logged on to
; CompuServe. At the ! prompt, press Alt-F to display the
; dialog box for script files. Select the script
; CICSETUP.SCR (this script) and execute it.
;
; This script will run for a minute or two and configure the
; default settings used with QMQGATE.EXE. At the end,
; this script will log off CompuServe and return to the
; QMODEM terminal mode.
;
;
Graphics TTY ;Set QMPRO Terminal emulation mode to TTY
TurnOFF ECHO ;Setup QMPRO for the various options to run this
TurnOFF 8_BIT ; script automatically.
TurnOFF LINEFEED
TurnOFF XON/XOFF
TurnON NOISE
TurnON MUSIC
TurnON SCROLL
TurnOFF PRINT
TurnOFF SPLIT
TurnON STATUSLN
TurnOFF DOORWAY
;
TimeOut 30 ;Set the wait time to 30 seconds
Send "SET BRIEF ON^M" ;Set CompuServe to Command Mode Only
;
Waitfor "!" ;Wait for the CompuServe "!" prompt
Delay 100
;
Send "GO TERMINAL^M" ;Go to the TERMINAL/SERVICE OPTIONS section
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this command with the following |
; |
; Sub-Menu Dispalyed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; Use this area to change your terminal type/parameters |
; and/or service options. |
; |
; Note: Your permanent and session settings match. |
; |
; 1 Instructions |
; 2 Change permanent settings |
; 3 Explanation of session vs. permanent |
; 4 Show session vs. permanent |
; 5 Change current session settings |
; |
; Enter choice! |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will select item |
; |
; #2 - "Change permanent settings" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this selection with the following |
; list of choices. The script will have to select each |
; one of the items starting with #2 and completing with #6. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; PERMANENT SETTINGS |
; |
; 1 Explanation |
; 2 Logon/Service options |
; 3 Display options |
; 4 Terminal type/parameters |
; 5 Transfer protocol/graphic support |
; 6 Make session settings permanent |
; |
; Type EXIT when done |
; |
; Enter choice! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #2 - "Logon/Service options" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu for the LOGON/SERVICE |
; Options. The script will select each one of the sub-menu |
; choices to insure the logon/service options are correct. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; LOGON/SERVICE OPTIONS |
; |
; 1 First service at logon [MAIN] |
; 2 CompuServe Mail waiting [NOTIFY ONLY] |
; 3 Personal menu established [NO] |
; (Select this to create or |
; change a personal menu.) |
; 4 TOP goes to [MAIN] |
; 5 Online editor [DEFAULT] |
; 6 Forum presentation mode [COMMAND] |
; |
; Enter choice! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "First service at logon" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this selection with 4 types of |
; services that are available for the first service at |
; logon time. The script will select the MAIN menu item. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; FIRST SERVICE |
; |
; Permanent setting = [MAIN] |
; |
; 1 MAIN menu (Normal setting) |
; 2 Designated first service (You specify which one.) |
; 3 Personal MENU (A menu you have constructed) |
; 4 COMMAND mode in the personal file area |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "MAIN menu" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; LOGON/SERVICE OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #2 - "CompuServe Mail waiting" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this selection with 2 types of |
; services that are available when mail is waiting. The |
; script will select the notification option. |
; |
; Sub-Menu Dispalyed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; COMPUSERVE MAIL WAITING |
; |
; Permanent setting = [NOTIFY ONLY] |
; |
; 1 Go to CompuServe Mail |
; (Will take you to CompuServe Mail when you have |
; messages waiting) |
; 2 Notify only |
; (Will notify you that you have messages waiting |
; then take you to your first service) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #2 - "NOTIFY ONLY menu" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; LOGON/SERVICE OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #4 - "TOP goes to" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "4^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this selection with 4 types of |
; services that are available when the user selects the TOP |
; menu in CompuServe. The script will select the MAIN |
; CompuServe Menu. |
; |
; Sub-Menu Dispalyed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; TOP GOES TO |
; |
; Permanent setting = [MAIN] |
; |
; 1 MAIN menu (Normal setting) |
; 2 Designated top page (You specify which one.) |
; 3 Personal MENU (A menu you have constructed) |
; 4 COMMAND mode in the personal file area |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "MAIN menu" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; LOGON/SERVICE OPTIONS menu is dispalyed again |
; |
; |
; The script will now select item |
; |
; #6 - "Forum presentation mode" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "6^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; CompuServe responds with a sub-menu contiaing 3 types of |
; prompts that are available for the forum presentations. |
; The script will select the Command mode of presentation. |
; |
; Sub-Menu Dispalyed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; FORUM PRESENTATION MODE |
; |
; This setting determines the type of presentation you will |
; normally receive in each forum you visit. You may change |
; this for a specific forum via the forum options. |
; |
; Permanent setting = [COMMAND] |
; |
; 1 MENU mode - novice/intermediate (menu of choices) |
; 2 COMMAND mode - expert - (one word prompts) |
; 3 DEFAULT (no preference) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #2 - "COMMAND mode" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; LOGON/SERVICE OPTIONS menu is displayed again |
; |
; |
; The script will now return to the Permanent Setting menu |
; via <CR> |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; All the Logon/Service options have been set. |
; |
; The script returned to the top menu "PERMANENT SETTINGS |
; which is displayed as follows: |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; PERMANENT SETTINGS |
; |
; 1 Explanation |
; 2 Logon/Service options |
; 3 Display options |
; 4 Terminal type/parameters |
; 5 Transfer protocol/graphic support |
; 6 Make session settings permanent |
; |
; Type EXIT when done |
; |
; Enter choice! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #3 - "Display options" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "3^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this selection with a sub-menu |
; which list the Permanent display options. The script will |
; have to select each one of the sub-menu choices to insure |
; the display options are correct. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; PERM DISPLAY OPTIONS |
; |
; 1 PAGED display [YES] |
; 2 BRIEF prompts [NO] |
; 3 CLEAR screen between pages [NO] |
; 4 BLANK lines sent [YES] |
; 5 Line feeds sent [YES] |
; 6 Language Preference [ENGLISH] |
; 7 Character Set [ASCII] |
; |
; Enter choice! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "PAGED dispaly" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this selection with 2 types of |
; dispaly options that are available. The script will |
; select continuos scrolling of the display. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; PAGED DISPLAY |
; |
; Permanent setting = [YES] |
; |
; 1 YES (Output is presented in pages you are asked |
; to enter <CR> after each page.) |
; 2 NO (Output is scrolled continuously to end |
; of article.) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #2 - "NO" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; PERM DISPLAY OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #2 - "BRIEF prompts" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu containing 2 types of |
; prompts that are available. The script will select |
; the expert mode. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; BRIEF PROMPTS |
; |
; Permanent setting = [YES] |
; |
; 1 YES - expert mode (You will receive abbreviated |
; prompts such as ! or More!.) |
; 2 NO - novice/intermediate mode |
; (You will receive full prompts |
; such as: |
; Enter choice! or |
; Enter <CR> for more!.) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "YES" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; NOTE: After the #1 selection is made, CompuServe will |
; ----- respond with the following warning: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; "FULL/BRIEF PROMPTS SELECTED |
; |
; Please note: Now that you will be receiving Short |
; prompts, some CompuServe services may not warn you |
; about SURCHARGED usage of the service. |
; |
; Last page!" |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; Just ENTER to let CompuServe know the message has been |
; and understood. |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Last page!"
Delay 100
Send "^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; PERM DISPLAY OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #3 - "CLEAR screen between pages" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "3^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu containing 2 types of |
; screen clearly options. The script will select no screen |
; clearing between pages. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; CLEAR SCREEN BETWEEN PAGES |
; |
; Permanent setting = [NO] |
; |
; 1 YES (clears screen between pages) |
; 2 NO (suppresses screen clear and |
; the use of cursor positioning) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #2 - "NO" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; PERM DISPLAY OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #4 - "BLANK lines sent" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "4^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu containing 2 types of |
; options for sending blank lines. The script will request |
; blanks lines to be sent. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; BLANK LINES SENT |
; |
; Permanent setting = [YES] |
; |
; 1 YES - normal mode |
; 2 NO - (Not sending blank lines can save space but |
; may make output more difficult to read.) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "YES" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; PERM DISPLAY OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #5 - "Line feeds sent" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "5^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu containing 2 types of |
; options for sending line feeds. The script will request |
; line feeds to be sent. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; LINE FEEDS SENT |
; |
; Permanent setting = [YES] |
; |
; 1 YES - normal mode |
; 2 NO - (Select this choice ONLY if your terminal or |
; software always adds a line feed to a |
; carriage return. Not sending line feeds may |
; result in text writing over itself.) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "YES" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; PERM DISPLAY OPTIONS menu is dispalyed again |
; |
; The script will now return to the Permanent Setting menu |
; via <CR> |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; All the Permanent Display options have been set. |
; |
; The script returned to the top menu "PERMANENT SETTINGS |
; which is displayed as follows: |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; PERMANENT SETTINGS |
; |
; 1 Explanation |
; 2 Logon/Service options |
; 3 Display options |
; 4 Terminal type/parameters |
; 5 Transfer protocol/graphic support |
; 6 Make session settings permanent |
; |
; Type EXIT when done |
; |
; Enter choice! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #4 - "Terminal type/parameters" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "4^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this selection with a sub-menu |
; which list the Terminal type parameters. The script will |
; have to select each one of the sub-menu choices to insure |
; the terminal parameters options are correct. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; TERMINAL TYPE/PARAMETERS |
; |
; 1 TERMINAL type [OTHER] |
; 2 Screen WIDTH [80] |
; 3 LINES per page [0] |
; 4 Form FEEDS [SIMULATED] |
; 5 Horizontal TABS [SIMULATED] |
; 6 Chars. received (CASE) [U/L] |
; 7 Chars. sent in CAPS [NO] |
; 8 PARITY [EVEN] |
; 9 Output DELAYS [0] |
; 10 ERASE when backspacing [YES] |
; 11 Micro inquiry sequence at logon [NO] |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "TERMINAL type" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu containing 8 types of |
; Terminal Types. The script will request the "Other" |
; terminal. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; TERMINAL TYPE |
; |
; Permanent setting = [OTHER] |
; |
; 1 Professional Connection/VIDTEX |
; 2 ANSI |
; 3 VT100 |
; 4 VT52 |
; 5 Heath (Zenith) |
; 6 ADM |
; 7 CRT |
; 8 Other |
; |
; Type H for more information. |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #8 - "Other" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "8^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; NOTE: After the #8 selection is made, CompuServe will |
; ----- respond with the following warning: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; "TERMINAL TYPE |
; |
; Your terminal type is now [OTHER] and your terminal |
; parameters have been adjusted accordingly. If you wish to |
; override these parameters, you can append ;TTY to your |
; User ID when logging on. |
; |
; Last page!" |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; Just ENTER to let CompuServe know the message has been |
; and understood. |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Last page!"
Delay 100
Send "^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; TERM/PARAMETER OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #2 - "Screen WIDTH" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu asking for the screen |
; width. The script will respond with 80 for 80 characters. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; SCREEN WIDTH |
; |
; Permanent setting = [80] |
; |
; This determines the number of characters per line. |
; |
; Type H for help. |
; |
; WIDTH: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now respond with 80 |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "WIDTH:"
Delay 100
Send "80^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; TERM/PARAMETER OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #3 - "LINES per page" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "3^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu asking for the number |
; of lines per page. The script will respond with 0 so the |
; display will be continous. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; LINES PER PAGE |
; |
; Permanent setting = [24] |
; |
; Type H for help. |
; |
; LINES per page: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now respond with 0 |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "LINES per page:"
Delay 100
Send "0^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; TERM/PARAMETER OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #4 - "Form FEEDS" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "4^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu asking if the form feeds |
; should be real or simulated. The script will respond with |
; simulated form feeds. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; FORM FEEDS |
; |
; Permanent setting = [SIMULATED] |
; |
; 1 REAL (uses local micro control to do new page form feeds)|
; 2 SIMULATED (prints out 8 blank lines between pages) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #2 - "SIMULATED" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; TERM/PARAMETER OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #5 - "Horizonal TABS" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "5^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu asking if the horizonal |
; tabs should be real or simulated. The script will respond |
; with simulated tabs. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; HORIZONTAL TABS |
; |
; Permanent setting = [SIMULATED] |
; |
; 1 REAL (uses local micro control to move to tab stops |
; across the page) |
; 2 SIMULATED (uses spaces to simulate tabs) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #2 - "SIMULATED" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; TERM/PARAMETER OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #6 - "Chars. received (CASE)" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "6^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu asking if the characters |
; sent should be U/L or UPPER only. The script will respond |
; with normal mode U/L. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; CHARACTERS RECEIVED (CASE) |
; |
; Permanent setting = [U/L] |
; |
; 1 U/L - normal mode (Output to you will be in upper or |
; lower case as available on the host computer.) |
; 2 UPPER only (You will receive only upper case output.) |
; 3 LOWER only (You will receive only lower case output.) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "U/L" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; TERM/PARAMETER OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #7 - "Chars. sent in CAPS" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "7^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu asking if the characters |
; echoed should be U/L or UPPER only. The script will respond|
; with normal mode U/L. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; CHARACTERS SENT IN CAPS |
; |
; Permanent setting = [NO] |
; |
; 1 NO - normal mode (Whatever you input will be in the |
; case you send it.) |
; 2 YES - (Whatever you input will always be in CAPS |
; regardless of how you send it.) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "NO" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; TERM/PARAMETER OPTIONS menu is displayed again |
; |
; The script will now select item |
; |
; #8 - "PARITY" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "8^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu asking for the parity |
; setting. The script will respond with even parity. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; PARITY |
; |
; Permanent setting = [EVEN] |
; |
; 1 EVEN |
; 2 ODD |
; 3 ZERO or NONE |
; 4 ONE |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "EVEN" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; TERM/PARAMETER OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #9 - "Output DELAYS" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "9^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu asking for the number |
; character delays after a C/R so the printer can keep up |
; with the output. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; OUTPUT DELAYS |
; |
; Permanent setting = [1] |
; |
; Output delays are needed when your printer operates at a |
; slower speed than your modem and characters are lost at |
; the beginning of each line. Delays will not be recognized, |
; however, if you are accessing through a supplemental network|
; such as TYMNET, TELENET, DATAPAK or a LATA. |
; |
; Delay value: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will respond with 0 |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Delay value:"
Delay 100
Send "0^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; TERM/PARAMETER OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #10 - "ERASE when backspacing" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "10^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu asking if the backspace |
; character is to be resent. The script will respond with |
; yes. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; BACKSPACE ERASE |
; |
; Permanent setting = [YES] |
; |
; 1 YES (When a backspace is received, the host sends |
; a space and another backspace which has the |
; effect of erasing the last character typed.) |
; 2 NO (no special processing when a backspace is |
; received) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "YES" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; TERM/PARAMETER OPTIONS menu is dispalyed again |
; |
; The script will now select item |
; |
; #11 - "Micro inquiry sequence at logon" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "11^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds with a sub-menu asking if the software |
; will react to a micro inquiry request. The script will |
; respond with no. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; MICRO INQUIRY AT LOGON |
; |
; Permanent setting = [NO] |
; |
; 1 Yes (Use this only if your software |
; supports an inquiry sequence.) |
; 2 No |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #2 - "NO" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; TERM/PARAMETER OPTIONS menu is dispalyed again |
; |
; The script will now return to the Permanent Setting menu |
; via <CR> |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; All the TERMINAL TYPE/PARAMETERS have been set. |
; |
; The script returned to the top menu "PERMANENT SETTINGS |
; which is displayed as follows: |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; PERMANENT SETTINGS |
; |
; 1 Explanation |
; 2 Logon/Service options |
; 3 Display options |
; 4 Terminal type/parameters |
; 5 Transfer protocol/graphic support |
; 6 Make session settings permanent |
; |
; Type EXIT when done |
; |
; Enter choice! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #5 - "Transfer protocol/graphic support" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "5^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this selection with a sub-menu |
; which list the File Transfer/Graphics options. The script |
; will select each one of the sub-menu choices to insure the |
; these parameters are correct. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; FILE TRANSFER/GRAPHICS |
; |
; FILE TRANSFER PROTOCOL |
; 1 PROTOCOL preference [SHOW MENU] |
; |
; GRAPHICS SUPPORT |
; 2 GIF SUPPORT [NO] |
; 3 NAPLPS SUPPORT [NO] |
; 4 RLE SUPPORT [NO] |
; (Note: Please consult your software and hardware |
; documentation for graphics support before changing |
; these settings.) |
; |
; Enter choice! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "PROTOCOL preference" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this selection with a sub-menu |
; which list the Protocol Preferences options. The script |
; will select Quick B protocol option. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; PROTOCOL PREFERENCE |
; |
; Permanent setting = [SHOW MENU] |
; |
; 1 B Protocol |
; 2 Quick B protocol |
; 3 XMODEM |
; 4 YMODEM |
; 5 KERMIT |
; 6 A Protocol |
; 7 SHOW MENU (if this choice is selected, you |
; will be presented a menu of |
; protocols when you request a file |
; transfer.) |
; |
; Enter choice or <CR> to leave unchanged! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #2 - "Quick B protocol" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "<CR> to leave unchanged!"
Delay 100
Send "2^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; FILE TRANSFER/GRAPHICS menu is dispalyed again |
; |
; The script will now return to the Permanent Setting menu |
; via <CR> |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; All the FILE TRANSFER/GRAPHICS have been set. |
; |
; The script returned to the top menu "PERMANENT SETTINGS |
; which is displayed as follows: |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; PERMANENT SETTINGS |
; |
; 1 Explanation |
; 2 Logon/Service options |
; 3 Display options |
; 4 Terminal type/parameters |
; 5 Transfer protocol/graphic support |
; 6 Make session settings permanent |
; |
; Type EXIT when done |
; |
; Enter choice! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #6 - "Make session settings permanent" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "6^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this selection with a sub-menu |
; which list the options to make these settings permanent. |
; The script will select to make the session settings |
; permanent |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; MAKE SESSION SETTING PERMANENT |
; |
; 1 Yes (Your permanent settings will be |
; updated as needed to match your |
; session settings.) |
; 2 No |
; 3 Show session vs. permanent settings |
; |
; Enter choice! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; #1 - "YES" |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "1^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; NOTE: After the #1 selection is made, CompuServe will |
; ----- respond with the following message: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; "MAKE SESSION SETTINGS PERMANENT |
; |
; Your permanent settings have been updated to match |
; your session settings. |
; |
; Last page!" |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; Just ENTER to let CompuServe know the message has been |
; and understood. |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Last page!"
Delay 100
Send "^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; All the Settings have been set. |
; |
; The script returned to the top menu "PERMANENT SETTINGS |
; which is displayed as follows: |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; PERMANENT SETTINGS |
; |
; 1 Explanation |
; 2 Logon/Service options |
; 3 Display options |
; 4 Terminal type/parameters |
; 5 Transfer protocol/graphic support |
; 6 Make session settings permanent |
; |
; Type EXIT when done |
; |
; Enter choice! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will now select item |
; |
; EXIT to indicate we are done |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "Enter choice!"
Delay 100
Send "EXIT^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this selection with the following |
; USER PROFILE menu. The script will simply logoff of |
; CompuServe because it is completed its task. |
; |
; Sub-Menu Displayed: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; CHANGE YOUR USER PROFILE |
; |
; 1 Terminal Settings |
; 2 Change Your Password |
; 3 Password Security Guidelines |
; 4 Change Your Billing Options or Credit Card Information |
; 5 Change Your Billing Address |
; |
; ! |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; The script will respond with OFF |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Waitfor "!"
Delay 100
Send "OFF^M"
;
;
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
; |
; CompuServe responds to this selection with the following: |
; |
; * * * * * * * * * * * * * * * * * * * * * * * * * * * * |
; |
; Thank you for using CompuServe! |
; |
; Off at 10:37 EST 9-Jan-94 |
; Connect time = 0:07 |
; * |
; NO CARRIER |
; |
;- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
Pause 5000 ;Wait 5 seconds
Hangup
;
Note
Note Your CompuServe Account has now been configured for use with
Note QMGATE.
Note
;
Exit ;Exit the script and return to terminal mode