Labels:text | diagram | black and white | font OCR: HOW TO MAKE A TROODON MASK You will need: of Scissors el Craft knife Glue Sharp pencil eye hole Length of thin elastic long tab C B When using the craft knife and scissors, ask small tab an adult to help you. nostril hole A e bl top top top al f f hole for fl fl elastic C D E g] gl g g h] h h2 Before you begin, stick the sheet with the 5. Glue the top of piece C to the long hatched mask pieces onto a piece of thin card. tab on piece B. Do the same with piece E, 1. Cut out all of the pieces. Cut out the eye gluing it to the long hatched tab on piece A. and nostril holes in pieces A and B. Score Finally, glue the top of piece D to the two along all the dotted lines with the point of the small hatched tabs on pieces A and B. scissors. Do not press too hard, or you will make a hole in the paper. 6. Cut along the f and g lines on pieces C and E. Stick the f pieces to fl and the g pieces to 2. Glue points a and b on piece B to the long gl, gluing them on the hatched areas. tab marked al and bl on piece A. 7. Glue points hl and h2 on pieces C and E 3. Fold the two sides of the face down along onto point h on piece D. the dotted lines to form the shape of the face. 8. Carefully make two small holes on either 4. Cut along the curved lines marked c and side of the mask with the point of a sharp join to cl by gluing on the hatched area. Do pencil, where marked, and thread some elastic the same with the lines marked d. To form the through, knotting each end. tip of the nose, glue e to el. Your mask is now ready to wear.
(.png)
