Labels:text | font OCR: HOW TO MAKE A TRICERATOPS MASK You will need: nose horn Scissors top Craft knife Glue Sharp pencil eye hole Length of thin elastic A neck frill holes for hole for elastic nose horn 100 nostril B D E Before you begin, stick the sheet with the top of piece A to B on the hatched area. mask pieces onto a piece of thin card. 6. Take pieces D and E and fold along the When using the craft knife and scissors, ask an dotted lines to make the two brow horns. Fold adult to help you. back the tabs and glue each horn in position 1. Cut out all of the pieces. Carefully score on the hatched areas on piece A. along the dotted lines with the point of the 7. Take piece C and fold down the center scissors. Do not press too hard, or you will score line. Bring the two halves round to form make a hole in the paper. a cone-shape and stick together using tabs d and e. Stick the tabs on the inside of the cone, 2. Take piece A and cut out the eye holes, nostril holes, and two holes for the nose horn. so they do not show. 8. Push the two close-together tabs through 3. Crease lines a and b on either side of the the diamond-shaped nose hole in piece A and nose. Fold and stick a back over b. press the remaining tab through the semi- 4. Fold along line c and glue the small tab circular hole. Bend the tabs back on the inside of the mask and stick in place with glue. on the end of one curved point under the other curved point to form a beak. 9. Make two holes on either side of the neck frill with the point of a sharp pencil. Thread 5. Take piece B and fold back along the dotted line to create the neck frill. Glue the some elastic through, knotting each end. Your mask is now ready to wear.
(.png)
