Der Mediaplex Sampler - Die 6 von Plex/6_v_plex.zip/6_v_plex/DISK5/DOS_34/AMAC44.ZIP/RFR005.QM

Text File | 1992-02-16 | 23KB | 481 lines

*                               RFR005.QM
*                  Macros To Count Words And Characters
*                        Written By Tom Hogshead
*                       [ See RFRMxx.QM For Use ]
*                                2/16/92
*  Key       Subfile                       Description
* =====  ===============  ====================================================
* @(3)                    Count Words in a File by John Goodman (Use this)
* @(0)                    Count Words in a File (Alternate version of @3)
* @(6)                    Count Words & Characters in File w/COUNT.EXE
* @(4)                    Count Words in a Block  by John Goodman
* @(5)                    Count Characters In A File INCLUDING Spaces
* @(2)                    Count Characters in a File EXCLUDING Spaces
* @(1)                    Count Characters in a Block
*
* @(9)   {e:\up\mis002}   Add Line Numbers  001 to  999 In Col 1
* @(0)   {e:\up\mis002}   Add Line Numbers 0001 to 9999 In Col 1
* @(3)   {e:\up\mis002}   Make File of Numbers 0001 to 9999 Ascending
* @(4)   {e:\up\mis002}   Make File of Numbers 9999 to 0001 Descending
* @(5)   {e:\up\mis002}   Make File of Numbers  001 to  999 Ascending
* @(6)   {e:\up\mis002}   Make File of Numbers  999 to  001 Descending
* @(1)   {e:\up\mis002}   Add Line Numbers 0001 to 9999 In Col 81
* @(2)   {e:\up\mis002}   Remove Previous Line Numbers Made With @1
*
*          {e:\up\RFRM*}--Return To RFRMxx.QM
* (Calibrated) Test File
* (Timing) Results
*
*-- eoi


*
* --------------------------------------
* @(0) Macro To Count Words In File
* --------------------------------------
* This macro counts the number of words in a File.  A word is defined
* as a string of characters contained in either the AltWordSet
* separated by a word delimiter.  The number of words in the File equal
* the number of lines in the NUL file after execution.

* Test macro using the calibrated file WORD (41 words).

* [ Number of WORDS in File ] = [ Number of LINES in temp file ]

@0 Macrobegin
        AltWordSet
        UnMarkBlock
        EndLine
        Dropanchor
        StoreScrBuff "c" Return
        BegFile
    LOOP:
        MarkWord
    jfalse 1:
        AppendScrBuff "c" Return
    1:  WordRight
    jtrue LOOP:
        EditFile "NUL" Return Quit
        EditFile Return
        GetScrBuff "c" Return
        UnMarkBlock
        DefaultWordSet
        BegFile
        DelLine
        EndFile
*
* 82 bytes Wed  02-20-1991  16:54:02
* 83 bytes Mon  07-15-1991  11:06:17 (TH @0, changed ! to NUL)
* 45 bytes Wed  08-21-1991  23:55:04 (TH @0)



*
* ----------------------------------------------------------------------
* @(1) Count Number Of Characters In A Block
* ----------------------------------------------------------------------
* To: Mike Butler, RelayNet, May 4, 1991  15:16:09
* MB> Is there any way to create a macro to count the number of
* MB> characters in a block?

* This QEdit macro determines a block's byte size and provides a means
* to calculate the Number of Characters in a block.  Block Byte Size can
* be useful for uploading CompuServe files where upload file descriptions
* are limited to 465 bytes:
*     Block Byte Size = Size of block if it were a file
*     Character Count = (Block Byte Size) minus 2 x (Number of Lines)
* Mark a block.  Block need not be closed.  Block byte size will be shown in
* a window and in front of the last line of a copy of the block.  Press
* <enter> to remove the window from the screen and return to the our
* starting point.  To determine the number of actual characters in a block,
* including spaces between text, subtract 2 x (number of lines in window)
* from (byte size).  The paragraph below with asterisks is 274 bytes, and
* has 277 - 4 x 2 = 269 characters including spaces and asterisks.

* NOTE: c:temp and c:dir are temporary files created and deleted from the
* disk.  Rename files and run QMAC if this causes problems.  This macro has
* only been tested with DOS 3.3.  SaveFile is used rather than WriteBlock
* in case c:temp and c:dir exist before running.

@1 Macrobegin
        Editfile "c:temp" Return        * Load temp file
        killfile Quit                   * Kill/quit c:temp
        EditFile Return                 * Load empty c:temp
        Copyblock                       * Copy block to temp file
        EndFile DelLine                 * Delete extra blank line
        Savefile                        * Save temp file to get size
        DOS "Dir " Currentfilename      * Get  DIR list of c:temp
        ">C:dir" Return Return          * Save DIR list of c:temp
        Editfile "C:dir" Return         * Load DIR list
        Gotoline "5" Return             * CursorDown to c:temp line
        Wordright Markword Copy         * Copy size to scrap
        Killfile Quit                   * Kill/quit c:dir
        Editfile "c:temp" Return        * Load c:temp
        Killfile                        * Kill it
        Endfile Begline                 *
        "Block size=" Paste             * Paste block size at bottom
        Makebotofscreen                 * Re-position
        Pause                           * Press <enter> to remove block size
        Quit                            * Character Count = Block Size
                                        *     minus 2 x Number of Lines
* 114 bytes Sat  05-04-1991  15:15:25


*
* ----------------------------------------------------------------------
* @(2) Count Number Of Characters In A File EXCLUDING Spaces
* ----------------------------------------------------------------------
* This macro counts the number of characters in a file EXCLUDING
* spaces.  @5 counts the number of characters in a file INCLUDING
* spaces.  The number of characters in a file is calculated by
* subtracting 2 x number of lines in file c:temp from reported byte
* size after macro execution.


@2 Macrobegin
        UnMarkBlock                     * Un-mark all blocks
        BegFile Markblockbegin          * Mark File
        EndFile Markblockend            *
        Editfile "c:temp" Return        * Load empty c:temp
        Killfile Quit                   * Kill/quit c:temp
        Editfile Return                 * Load empty temp file
        Copyblock Unmarkblock           * Copy File to temp file
        Findreplace " " Return          * Replace all single spaces
        DelLine Return "GN" Return      * With Blanks, globally
 DELBLANKLINES:                         *
        Begfile                         * Get to begin of file
 CHK4BLANK:                             *
        Endline Begline                 * Check if line has text
        Jtrue  NOTBLANK:                * If so, go to NOTBLANK
        Delline                         * Or line is blank, delete it
        Jtrue CHK4BLANK:                * Go check next line
 NOTBLANK:                              *
        Endpara                         *ELSE  Move to paragraph end
        Cursordown                      * Move down to next line
        Jtrue CHK4BLANK:                * If not eof, check again
 GETCOUNT:                              *
        Savefile                        * Save temp file to get size
        DOS "DIR " Currentfilename      * Get  DIR list of c:temp
        ">C:dir" Return Return          * Save DIR list of c:dir
        Editfile "C:dir" Return         * Load DIR list
        Gotoline "5" Return             * Cursordown to c:temp line
        Wordright Markword Copy         * Copy size to scrap
        Killfile Quit                   * Kill/quit c:dir
        Editfile  "c:temp" Return       * Load compressed c:temp
        Killfile                        * Kill c:temp disk copy
        Begline "Byte size=" Paste      * Paste byte size at bottom
        Makebotofscreen                 * Re-position
        Pause                           * Press <enter> to remove window
        Quit                            * Character Count = Byte Size
                                        *     minus 2 x Number of Lines
* 92 bytes Wed  02-20-1991  17:02:29
* 141 bytes Sat  05-04-1991  15:38:07 changed temp file names, added pause
*                                     corrected gotoline "5"

*
* ---------------------------------------------
* @(3) Count Words in File
*      Alternate version of @0 by John Goodman
* ---------------------------------------------
* This macro will count the number of words in the current file.  A
* word is considered to be a sequence of one or more characters in
* the AltWordSet delimited by at least one character that is not in
* the AltWordSet (this definition should suffice for most
* applications).  The number of words in the file is displayed in a
* separate window after they have been counted.  When the Enter key
* is pressed, the word count display will be removed and the cursor
* will be positioned at the top of the original file. The macro
* should work consistently regardless of mode toggle or QConfig
* settings and will not change the edit status of the original
* file.  The macro does, however, set the word character set to
* DefaultWordSet at the end of the macro.
*
@3  MacroBegin
    AltWordSet          * Use alternate word character set
    UnmarkBlock BegFile * Remove blocks and start at top
    OneWindow           * Remove any windows
    EditFile            * Use the NUL file for counting
      "NUL" Return
    Quit                * Make sure NUL file is empty
    HorizontalWindow    * Create window for counting
    EditFile Return     * Re-edit the NUL file
    DropAnchor          * Start a block
    "0123456789"        * Type digits 0-9
    Copy BegLine        * Make six copies of digits line
    Paste 6
    MarkCharacter       * Copy the digits w/out EOL char
    EndLine Copy
    UnmarkBlock
    PrevWindow          * Return to original file
 MAINLOOP:              * Loop for each word in file
    MarkWord            * Test if a word at cursor position
    JFalse NEXTWORD:    * If not, skip to next word
    NextWindow          * Go to counting window
    EndFile BegLine     * Go to ones digit position
 INCRLOOP:
    DelCh               * Delete (increment) the current digit
    EndLine             * Test if any digits remaining
 JTrue INCRDONE:
    Paste               * Re-paste the 0-9 string
    UnmarkBlock
    CursorUp            * Go to up next significant digit
 Jump INCRLOOP:         * Increment next significant digit
 INCRDONE:
    PrevWindow          * Return to original file
 NEXTWORD:
    WordRight           * Go to next word right
 JTrue MAINLOOP:        * If no words to right, display count
    BegFile             * Return to beginning of original file
    NextWindow          * Go to count window
    BegFile CursorRight * Go to top of 2nd column
    MarkColumn          * Delete all but column 1
    EndLine PageDown
    DeleteBlock
    JOINLOOP:           * Join column 1 into a single line
      CursorUp
      JFalse PROMPT:
      JoinLine
    Jump JOINLOOP:
 PROMPT:
    EndLine             * Go to end of count and display prompt
    " Words... Press <Enter> to Continue"
    Pause               * Wait for user to press Enter
    Quit CloseWindow    * Delete the NUL file and close window
    DefaultWordSet      * Reset default word set characters
*
* 167 bytes Fri  08-23-1991  21:29:35 (JG @3)

*
* ---------------------------------
* @(4) Count Words in Marked Block
*      Written by John Goodman
* ---------------------------------
* This macro will count the number of words in the currently marked
* block. Any type of block may be used and both block end points
* need not be set. A word is considered to be a sequence of one or
* more characters in the AltWordSet delimited by at least one
* character that is not in the AltWordSet (this definition should
* suffice for most applications).  The number of words in the block
* is displayed in a separate window after they have been counted.
* When the Enter key is pressed, the word count display will be
* removed and the cursor will be positioned at its original
* location in the file (the original block will be unmarked). The
* macro should work consistently regardless of mode toggle or
* QConfig settings and will not change the edit status of the
* original file.  The macro does, however, set the word character
* set to DefaultWordSet at the end of the macro.
*
@4  MacroBegin
    AltWordSet          * Use alternate word character set
    OneWindow           * Remove any windows
    EditFile            * Use the NUL file for counting
      "NUL" Return
    Quit                * Make sure NUL file is empty
    HorizontalWindow    * Create window for counting
    EditFile Return     * Re-edit the NUL file
    CopyBlock           * Copy the block of text to NUL file
    JFalse END:         * If no block, exit
    UnmarkBlock         * Unmark the block
    SplitLine           * Put blank line at top
    DropAnchor          * Start a block
    "0123456789"        * Type digits 0-9
    Copy BegLine        * Make six copies of digits line
    Paste 6
    MarkCharacter       * Copy the digits w/out EOL char
    EndLine Copy
    UnmarkBlock
    BegFile             * Go to beginning of text
    CursorDown 7
 MAINLOOP:              * Loop for each word in file
    DeleteBlock         * Delete the last word processed
    MarkWord            * Test if a word at cursor position
    JFalse NEXTWORD:    * If not, skip to next word
    CursorUp BegLine    * Go to ones digit position
 INCRLOOP:
    DelCh               * Delete (increment) the current digit
    EndLine             * Test if any digits remaining
 JTrue INCRDONE:
    Paste               * Re-paste the 0-9 string
    UnmarkBlock
    CursorUp            * Go to up next significant digit
 Jump INCRLOOP:         * Increment next significant digit
 INCRDONE:
    BegFile             * Return to beginning of text
    CursorDown CursorDown  * Many cursordowns instead of displaying
    CursorDown CursorDown  * RepeatCmd prompt box many times
    CursorDown CursorDown
    CursorDown
 NEXTWORD:
    MarkCharacter       * Block last word processed to delete it
    WordRight           * Go to next word right
 JTrue MAINLOOP:        * If no words to right, display count
    UnmarkBlock
    BegFile CursorRight * Go to top of 2nd column
    MarkColumn          * Delete all but column 1
    EndLine PageDown
    DeleteBlock
    JOINLOOP:           * Join column 1 into a single line
      CursorUp
      JFalse PROMPT:
      JoinLine
    Jump JOINLOOP:
 PROMPT:
    EndLine             * Go to end of count and display prompt
    " Words... Press <Enter> to Continue"
    Pause               * Wait for user to press Enter
 END:
    Quit CloseWindow    * Delete the NUL file and close window
    DefaultWordSet      * Reset default word set characters
*
* 183 bytes Fri  08-23-1991  17:45:40 (JG @4)


* (Calibrated) Test File, 41 Words with @0 and @3

* ┌────────────────────────────── WORD ─────────────────────────────────────┐
* │  1 2  3                                                                 │
* │                                                                         │
* │ ! @ # $ % ^ & * ' ( ) + | - = \ , . / ; ' [ ] < > ? : " { }             │
* │                                                                         │
* │ !@#$%^&*'()+|-=\,./;'[]<>?:"{}                                          │
* │                                                                         │
* │  4   5   6                                                              │
* │                  126__Characters 41_Words(W/@0) 41_Words(W/@3) 7 8 9 aa │
* │                                                                         │
* │ __ Characters                                                           │
* └─────────────────────────────────────────────────────────────────────────┘

*
* ----------------------------------------------------------------------
* @(5) Count Number Of Characters In A File INCLUDING Spaces
* ----------------------------------------------------------------------
* This macro counts the number of characters in a file INCLUDING
* spaces.  @2 counts the number of characters in a file EXCLUDING
* spaces.  The number of characters in a file is calculated by
* subtracting 2 x number of lines in file c:temp from reported byte
* size after macro execution.

@5 Macrobegin
        UnMarkBlock                     * Un-mark all blocks
        BegFile Markblockbegin          * Mark File
        EndFile Markblockend            *
        Editfile "c:temp" Return        * Load empty c:temp
        Killfile Quit                   * Kill/quit c:temp
        Editfile Return                 * Load empty temp file
        Copyblock Unmarkblock           * Copy File to temp file
*         Findreplace " " Return          * Replace all single spaces
*         DelLine Return "GN" Return      * With Blanks, globally
 DELBLANKLINES:                         *
        Begfile                         * Get to begin of file
 CHK4BLANK:                             *
        Endline Begline                 * Check if line has text
        Jtrue  NOTBLANK:                * If so, go to NOTBLANK
        Delline                         * Or line is blank, delete it
        Jtrue CHK4BLANK:                * Go check next line
 NOTBLANK:                              *
        Endpara                         *ELSE  Move to paragraph end
        Cursordown                      * Move down to next line
        Jtrue CHK4BLANK:                * If not eof, check again
 GETCOUNT:                              *
        Savefile                        * Save temp file to get size
        DOS "DIR " Currentfilename      * Get  DIR list of c:temp
        ">C:dir" Return Return          * Save DIR list of c:dir
        Editfile "C:dir" Return         * Load DIR list
        Gotoline "5" Return             * Cursordown to c:temp line
        Wordright Markword Copy         * Copy size to scrap
        Killfile Quit                   * Kill/quit c:dir
        Editfile  "c:temp" Return       * Load compressed c:temp
        Killfile                        * Kill c:temp disk copy
        Begline "Byte size=" Paste      * Paste byte size at bottom
        Makebotofscreen                 * Re-position
        Pause                           * Press <enter> to remove window
        Quit                            * Character Count = Byte Size
                                        *     minus 2 x Number of Lines
* 141 bytes Sat  05-04-1991  15:38:07 (TH @2)
* 130 bytes Wed  08-28-1991  00:13:49 (TH @5)

*
* ----------------------------------------------------------------------
* @(6) Count Words and Characters in File Using COUNT.EXE
* ----------------------------------------------------------------------
* This macro counts the number of words and characters in the file
* currently being edited using COUNT.EXE written by Robert Kiesling.
* COUNT.EXE can be found on Exec-PC as COUNT2.ZIP.

@6 macrobegin
        savefile
        DOS "count " currentfilename return
*
* 20 bytes Thu  08-29-1991  08:58:12 (TH @6)


*          (Timing) Results of First 1,000 Words of QEDIT.DOC
*         ───────────────────────────────────────────────────-
*           Letters   Words   Chars  Lines  Blank   Seconds
*           --------  -----   -----  -----  -----   -------
* COUNT.EXE           1004    7294    175             1.43
* RWC.EXE     6940    1002            175     48      2.36
* WC.EXE              1008    7119    175             2.80
* @5 (TH)                     6944                    4.3 - spaces counted
* @2 (TH)                     5571                    6.2 - spaces not counted
* @3 (JG)             1000                           41.6 <- Best Macro to use
* @4 (JG)             1000                          105.4
* @0 (TH)             1000                          108.2

*    (JG) John Goodman, author

* The above timing results are reported for the first 1,000 words of
* the QEdit Reference Manual, QEDIT.DOC, v2.1 dated February 1990, 175
* lines, included with the Shareware version.  The 1,000th word is
* 'use' on line 175.  This 1,000 word portion of QEDIT.DOC is included
* in AMACxx.ZIP as file 'word1k'.  Timing measurements reported to two
* decimal places were measured with TIMER.EXE dated 11/10/85.  Timing
* measurements reported to one decimal place were measured using a
* stopwatch.

* As can be seen from these timing results, COUNT.EXE appears to be the
* fastest and most versatile program.  It can be found on Exec-PC as
* COUNT2.ZIP.  The fact that COUNT.EXE counts 4 more words than @0, @3
* or @4 must be attributable to different definitions of 'words'.  Of
* the macros to count words, John Goodman's @3 is by far the fastest
* and should be the macro of choice for this purpose.  Thanks John for
* this superb job of macro programming.

* Although the character counts are 'close' comparing COUNT.EXE,
* WC.EXE, and @5, these differences must also be attributed to
* different definitions of 'characters' and/or counting techniques:

*         @5: 7204 bytes - 2 x 130 lines = 6944 chars
*         @3: 5831 bytes - 2 x 130 lines = 5571 chars

* COUNT.EXE appears the program to use based on speed.  Preferred use
* of @2 or @5 depends user on requirements.  Note COUNT.EXE byte count
* of characters is 175 more than with WC.EXE possibly because COUNT.EXE
* counts the 175 eol characters inserted by QEdit and WC.EXE does not.
* COUNT.EXE character count is the byte size of the file counted.

* As a point of interest, following is the timed output using COUNT.EXE
* on the file QEDIT.DOC:

*          Volume in drive E is Seagate 1
*          Directory of  E:\QE

*         QEDIT    DOC   244279   4-03-90   2:10a
*                 1 File(s)   3393536 bytes free

* Executing E:\COMMAND.COM/c count E:\QE\QEDIT.DOC
* Count (c)1987 Robert Kiesling.  All rights reserved

* Counting E:\QE\QEDIT.DOC
* Characters:     244279
* Words:          32569
* Lines:          6253

* [E:\COMMAND.COM/c count E:\QE\QEDIT.DOC]

* Start: 08/28/1991 - 02:53:42.44
* Stop:  08/28/1991 - 02:54:03.47

* Elapsed time: 0 hours, 0 minutes, 21.03 seconds.