Der Mediaplex Sampler - Die 6 von Plex

home *** CD-ROM | disk | FTP | other *** search

/ Der Mediaplex Sampler - Die 6 von Plex / 6_v_plex.zip / 6_v_plex / DISK5 / DOS_34 / AMAC44.ZIP / PAGE25.QM < prev next >

Wrap

Text File | 1992-06-22 | 25KB | 614 lines

* PAGE25.QM * Macros To Paginate Text Files, Qmac Files and SLMR/OLX Messages * Written by Tom Hogshead * 6/18/92 * * @f1 Number Pages in File Containing 'Page' <space> '-' ( ) |new * * @1 Paginate w/User Selected Page Length and Break Locations * @4 Paginate Qmac Text Files w/User Selected Break Locations * @2 Paginate SLMR/OLX Messages w/User Selected Break Locations * * @0 Remove Pagination From Text Files * @5 Remove Pagination From Qmac Text Files * @3 Remove Pagination From SLMR Messages * * -Select Breaks- -Add Page Numbers- * @6 Paginate 66 LPP With No No * @7 | Yes No * @8 | Yes Yes, query * @9 | Yes Yes, query bar * * @h Jump To Item or Macro In Index * * Description of Macros * Files Included * Change Settings and Running, How To * Macros * Other Macros Not Included * Version History * *--eoi * (Description) * -------------- * PAGE25.QM macros paginate files, QMAC text files and SLMR/OLX * messages so page break locations can be seen and moved for better * readability. * (Files) * -------- * PAGExx.QM This txtfile of macros * PAGExx.MAC Macfile converted from this txtfile with QMAC * PAGE.TST 200 line file with line numbers to set parameters * PAGE-QM.TST 200 line file with line numbers and asterisk in column 1 * PAGE.INF Description of macros * (Change) Settings and Running * ------------------------------ * For different settings change ** below with the following formulae: * (PL-TM-BM-1)= 53, (TM-2)= 4, .... etc where TM= 6, BM= 6, PL= 66 * These macros paginate to 54 lines/page. Remember INSERT must be * ON for some macros. * Depending on whether a file is reloaded with no pagination or re * paginated, there may be an extraneous carriage return and/or line * feed present that cannot be removed when paginating. You may also * see the top margin vary +- 1. Just be aware. Some printers may * also handle files paginated with these macros differently. * It is important that no lines in a file or a QMAC txtfile contain * "page" space "-" or that and the subsequent line will be deleted * when using some of the macros. * To BEGIN, just type "START PAGE" <Enter>. All pertinent files will * be loaded in the "Ring" for viewing, and PAGE25.MAC is read. * Alternatively, type "START PAGE 0" <Enter> and the disk copies of * all files in the "Ring" will be loaded ready for editing, saving * time. * These macros require "QEdit and QMAC v2.1, February, 1990" or later. * Insert must be On. * (Macros) * M A C R O S * ---------------------------------------------------------------------- * @(1) Paginate With User Selecting Page Length and Page Break Location * ---------------------------------------------------------------------- * This macro enables the user to paginate a file with user selecting * the page length and final page break locations for better visibilty. * At the first pause, enter the page length number of lines, then press * <enter>. At each pause thereafter cursor up only to select the * preferred location to insert each page break and press <enter>. * Previous page breaks are removed before paginating. This macro * requires QEdit v2.15. @1 macrobegin setscreenoff REMOVE: begfile find #12 return delline return * Search for FF's jfalse PAGE delline * Delete all FF's in file jump REMOVE * Loop 'till no more FF's PAGE: begfile setscreenon cursordown repeatcmd pause * Select page length # of lines return setscreenoff cursorup * To compensate for repeatcmd LOOP: insertline begline cursorright #24 cursorright * Instructions "only, enter to set" * | begline unmarkblock markline markline makectrofscreen setscreenon pause * Move cursor up to select loc setscreenoff deleteblock * Remove instructions insertline #12 * Insert FF at cursor markcolumn gotocolumn "80" return fillblock #27 return * Make FF line visible unmarkblock begline cursordown repeatcmd return * Move to next FF loc jtrue LOOP * Loop until eof END: begfile * * 101 bytes Tue 05-26-1992 03:49:09 (TH @1) * * ---------------------------------------------------------------------- * @(2) Paginate SLMR/OLX Messages, * Remove Previous Pagination Before Pagination * ---------------------------------------------------------------------- * This macro inserts page breaks in SLMR/OLX messages (.PG) every 144 * lines. The user is given the option at each prompt to position the * page break for better visibility by moving the cursor up only to * select the preferred location, and pressing <enter>. Previous page * breaks are removed before paginating. @2 macrobegin REMOVE: begfile find ".PG" return delline return jfalse PAGE delline jump REMOVE PAGE: begfile LOOP: cursordown 144 jfalse END insertline begline cursorright #24 cursorright "only, enter to set" begline unmarkblock markline markline makectrofscreen pause deleteblock insertline ".PG" cursordown jump LOOP END: begfile * * 96 bytes Tue 05-26-1992 03:49:00 (TH @2) * * ---------------------------------------------------------------------- * @(3) Remove Pagination From SLMR Messages * ---------------------------------------------------------------------- * This macro removes pagination inserted with @2 in SLMR Messages. @3 macrobegin REMOVE: begfile find ".PG" return delline return jfalse END delline jump REMOVE END: begfile * * 23 bytes Mon 05-25-1992 16:03:59 (TH @3) * * ---------------------------------------------------------------------- * @(4) AUTOMATIC Page Breaks Only, NO Page #'s (For QMAC txtfiles only) * ---------------------------------------------------------------------- * Be careful not to place page breaks within a macro. QMAC sometimes gets * confused when page break lines are within macros, especially with labels. * Place page breaks only between macros. @4 macrobegin setprintpagesize "0" return * cut off QEdit pagination LABEL1: * & top/bottom margins find #12 #27 return delline return jfalse LABEL2 delline * delline if FF Esc found jump LABEL1 LABEL2: begfile find #10 return delline return jfalse LABEL3 delline * delline if LF found jump LABEL2 LABEL3: begfile #10 repeatcmd "3" return * insert 4 LF's on top splitline cursordown ** set "3"=(TM-3) ** begline LABEL4: cursordown repeatcmd "52" return ** set "52"=(PL-TM-BM-2) ** jfalse LABEL5 "Cursor only to between macros, ENTER to set" return cursorup markline markline pause deleteblock begline #42 #12 #27 repeatcmd "71" return * insert asterisk FF 72 Esc's #10 repeatcmd "4" return ** set "4"=(TM-2) ** return jump LABEL4 LABEL5: endfile return #42 #12 #27 repeatcmd "77" return begfile * * 193 bytes Sat 07-28-1990 15:20:09 * 191 bytes Mon 05-25-1992 15:24:23 (TH @4, changed "n" to delline) * * ---------------------------------------------------------------------- * @(5) Removes Pagination Only (For QMAC txtfiles only) * ---------------------------------------------------------------------- @5 macrobegin LABEL1: begfile find #12 #27 return delline return jfalse LABEL2 delline * Delline if FF Esc found jump LABEL1 LABEL2: begfile find #10 return delline return jfalse LABEL3 delline * Delline if LF found jump LABEL2 LABEL3: begfile * * 37 bytes Sat 07-28-1990 15:20:29 * 35 bytes Mon 05-25-1992 15:24:28 (TH @5, changed "n" to delline) * * ---------------------------------------------------------------------- * @(6) AUTOMATIC Page Breaks Only, NO Page #'s * ---------------------------------------------------------------------- @6 macrobegin setprintpagesize "0" return lab1: begfile find #12 #27 return delline return jfalse lab2 delline jump lab1 lab2: begfile find #10 return delline return jfalse lab3 delline jump lab2 lab3: begfile find #12 return delline return jfalse lab4 delch jump lab3 lab4: begfile find "page " "-" return delline return jfalse lab5 delline delline jump lab4 lab5: begfile #10 repeatcmd "4" return splitline cursordown ** set "4"=(TM-2) ** lab6: begline cursordown repeatcmd "53" return ** set "53"=(PL-TM-BM-1) ** jfalse lab7 begline #12 #27 repeatcmd "72" return #10 repeatcmd "5" return return jump lab6 ** set "5"=(TM-1) ** lab7: endfile return begline #12 #27 repeatcmd "78" return begfile * * 136 bytes Sat 07-28-1990 15:20:38 * 132 bytes Mon 05-25-1992 15:24:32 (TH @6, changed "n" to delline) * * ---------------------------------------------------------------------- * @(7) Add Page Breaks To File Without Page Numbers And * Remove Previous Pagination Before Pagination * 66 Lines/Page, Top And Bottom Margins 6 * ---------------------------------------------------------------------- * This macro adds page breaks and top and bottom margins to * files by inserting ASCII formfeed character #12 and linefeed * character #10. Escape character #27 is used to make page break * locations more visible. The macro is written to print 54 * lines/page with a top and bottom margin of 6. The user may * change these settings by changing '**' below using the following * formulae and recompiling with QMAC: * (PL - TM - BM -1) = 53 * (TM - 2) = 4 * (TM - 1) = 5 * where TM = 6 * BM = 6 * PL = 66 * To run, press @7 with the cursor positioned anywhere in the * file. At each prompt, move the cursor up only to select the * preferred location for each page break, and press <enter>. * Insert must be ON. @7 macrobegin setprintpagesize "0" return lab1: begfile find #12 #27 return delline return jfalse lab2 delline jump lab1 lab2: begfile find #10 return delline return jfalse lab3 delline jump lab2 lab3: begfile find #12 return delline return jfalse lab4 delch jump lab3 lab4: begfile find "page " "-" return delline return jfalse lab5 delline delline jump lab4 lab5: begfile #10 repeatcmd "4" return ** set "4"=(TM-2) splitline cursordown lab6: begline cursordown repeatcmd "53" return ** set "53"=(PL-TM-BM-1) jfalse lab7 "UP arrow key only, ENTER to set" return cursorup markline markline pause deleteblock begline #12 #27 repeatcmd "72" return #10 repeatcmd "5" return ** set "5"=(TM-1) return jump lab6 lab7: endfile return begline #12 #27 repeatcmd "78" return begfile * * 204 bytes Sat 07-28-1990 15:20:55 (TH @7) * 204 bytes Sun 08-04-1991 12:15:44 (TH @7, opened up for clarity) * 200 bytes Mon 05-25-1992 15:24:37 (TH @7, changed "n" to delline) * * ---------------------------------------------------------------------- * @(8) PAGINATE, Add Page #'s, NO Query Bar * ---------------------------------------------------------------------- @8 macrobegin setprintpagesize "0" return lab1: begfile find #12 #27 return delline return jfalse lab2 delline jump lab1 lab2: begfile find #10 return delline return jfalse lab3 delline jump lab2 lab3: begfile find #12 return delline return jfalse lab4 delch jump lab3 lab4: begfile find "page " "-" return delline return jfalse lab5 delline delline jump lab4 lab5: begfile #10 repeatcmd "4" return splitline cursordown ** set "4"=(TM-2) ** lab6: begline cursordown repeatcmd "53" return ** set "53"=(PL-TM-BM-1) ** jfalse lab7 "UP arrow key only, ENTER to set" return cursorup markline markline pause deleteblock begline #12 #27 repeatcmd "72" return #10 repeatcmd "5" return return ** set "5"=(TM-1) ** "page " "--" return return cursorup cursorup centerline jump lab6 lab7: endfile return begline #12 #27 repeatcmd "78" return begfile lab8: find "page " "-" return delline return jfalse lab9 makectrofscreen cursorright repeatcmd "5" return pause jump lab8 lab9: begfile * * 254 bytes Sat 07-28-1990 15:21:11 * 249 bytes Mon 05-25-1992 15:24:41 (TH @8, changed "n" to delline) * * ---------------------------------------------------------------------- * @(9) PAGINATE, Add Page #'s With Query Bar * ---------------------------------------------------------------------- @9 macrobegin setprintpagesize "0" return lab1: begfile find #12 #27 return delline return jfalse lab2 delline jump lab1 lab2: begfile find #10 return delline return jfalse lab3 delline jump lab2 lab3: begfile find #12 return delline return jfalse lab4 delch jump lab3 lab4: begfile find "page " "-" return delline return jfalse lab5 delline delline jump lab4 lab5: begfile #10 repeatcmd "4" return splitline cursordown ** set "4"=(TM-2) ** lab6: begline cursordown repeatcmd "53" return ** set "53"=(PL-TM-BM-1) ** jfalse lab7 "UP arrow key only, ENTER to set" return cursorup markline markline pause deleteblock begline #12 #27 repeatcmd "72" return #10 repeatcmd "5" return return ** set "5"=(TM-1) ** "page " "--" return return cursorup cursorup centerline jump lab6 lab7: endfile return begline #12 #27 repeatcmd "78" return begfile lab8: find "page " "-" return delline return jfalse lab9 makectrofscreen begline "Enter page #, start p2 " *| " " repeatcmd "13" return #25 return cursorup begline *| markblockbegin endline markblockend cursordown begline wordright cursorright repeatcmd "5" return pause cursorup delline cursordown jump lab8 lab9: begfile * * 327 bytes Sat 07-28-1990 15:21:27 * 322 bytes Mon 05-25-1992 15:24:45 (TH @9, changed "n" to delline) * 318 bytes Mon 05-25-1992 17:14:53 (TH @9 changed message *|) * * ---------------------------------------------------------------------- * @(0) Removes Pagination * ---------------------------------------------------------------------- * This macro removes page breaks, top and bottom margins, and page * numbers from a file paginated with any of the macros in * PAGExx.QM. To run, press @0 with the cursor positioned anywhere * in the file. The cursor returns to top of file after completion. @0 macrobegin lab1: begfile find #12 #27 return delline return jfalse lab2 delline jump lab1 lab2: begfile find #10 return delline return jfalse lab3 delline jump lab2 lab3: begfile find #12 return delline return jfalse lab4 delch jump lab3 lab4: begfile find "page " "-" return delline return jfalse lab5 delline delline jump lab4 lab5: begfile * * 78 bytes Sat 07-28-1990 15:21:44 (TH @0) * 78 bytes Sun 08-04-1991 12:15:29 (TH @0, opened up for clarity) * 74 bytes Mon 05-25-1992 15:24:50 (TH @0, changed "n" to delline) * * ---------------------------------------------------------------------- * @(f1) Number Pages in File Containing 'Page' <space> '-' * ---------------------------------------------------------------------- * This macro will number pages in a file containing the word 'Page' * followed by a single space and '-'. The maximum page number is 99, * but macro can easily be modified to number an unlimited number of * pages. The macro requires QEdit v2.15 and was written at the request * of Carol Whitney in SemWare SmartNet Conference 23 Message #1533 June * 17, 1992. * This macro may also be incorporated in @8 and @9 to paginate files * and automatically number pages. * Example * -------- * Page - * Page - * Page - * Page - * Page - * Page - * Page - * Page - * Page - * Page - * Page - * Becomes * -------- * Page - 1 * Page - 2 * Page - 3 * Page - 4 * Page - 5 * Page - 6 * Page - 7 * Page - 8 * Page - 9 * Page - 10 * Page - 11 @f1 macrobegin setscreenoff setautoindentmode toggleindent onewindow markcolumn * Mark pos in starting file editfile 'nul' return quit * Load/quit nul gotoblockend begfile * Return to bof editfile return * Load nul as next file markcharacter '1234567890' * Insert counting line shiftright * Put's space in col 1 storescrbuff 'c' return * Store to scratch buff 'c' copy delch * Remove '0' line 1 addline begline paste * Insert another counting line unmarkblock COUNT: begline markcolumn getprev * Put ten's digit line 2 col 1 cut * Cut page # to scrap NEXT_TEN: prevfile endline cursorright find * Find 'Page ' '-' return delline return * empty page # jfalse END markword gotoblockend * Mark 'Page' cursorright cursorright cursorright * Pos one spc rt of '-' deltoeol * Delete any previous page #'s paste unmarkblock * Insert page # makectrofscreen setscreenon setscreenoff nextfile cursorright isendline jfalse NOT_EOL * Test if we need to jump 10 cursorup begline delch * Mpve next ten's to col 1 isemptyline jtrue QUIT cursordown begline markcolumn getprev * Put ten's digit line 2 col 1 cut * Cut page # to scrap getscrbuff 'c' return * Insert new one's line begline jump NEXT_TEN NOT_EOL: cursorleft * Re-position after eol test jump COUNT * Count 'till no more pages QUIT: quit * Quit nul END: toggleindent * * 123 bytes Wed 06-17-1992 14:31:12 (TH @f1, to CW #23/1544) * * ---------------------------------------------------------------------- * @(h) Jump From Index Line To Locate Macro or Item In File Below * ---------------------------------------------------------------------- * Alt_h can be used to quickly jump from Index Line to the desired * item or macro in the file: * 1. Press Alt and h at the same time. Line 1 is marked to * highlight. Cursor down to desired line in Index. * 2. Press Enter. The macro then locates and jumps to the item * selected on the cursor line in the document below. * See BOOKxx.Qm and JMPPOSxx.QM in AMACxx.ZIP for more discussion * about using bookmarks and positions markers to jump to positions in * files. @h macrobegin unmarkblock * Unmark any marked blocks defaultwordset * In case altwordset on begfile * Go to file begin markline markline * And highlight line 1 pause * Pause for Index selection wordright markword * Mark first word on line copy * Copy word to scrap endpara * Go to end of Index makectrofscreen * Cursor line center of window find "(" paste ")" return "I" return * Find first marked word in doc jfalse NOMARK begline * If mark found, go to begline jump END NOMARK: begfile * if no mark found, go to begfile END: * * 33 bytes Wed 07-10-1991 10:11:24 (TH)@h) * (Other) Macros: See ALLMACRO.INF * (Version) History * ------------------ * 2.3f - Changed @7 and @0 documentation. * In Amac40.zip. * 2.3g - Corrected definitions of #10 and #12 on @7. 8/9/91 * - Opened up @7 and @0 for clarity, no macro change. 8/9/91 * 2.4 - Added @2 and @3 to Paginate SLMR messages. 5/25/92 * - Changed "n" to delline in all finds in @4-0. 5/25/92 * - Changed message in @9. 5/25/92 * - Added @1 for user selected page length, then paginate 5/25/92 * (In Amac43.zip) * 2.5 - Added @f1 to automatically number pages. 6/17/92 * * * * * * * * * * *--eof