home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Der Mediaplex Sampler - Die 6 von Plex
/
6_v_plex.zip
/
6_v_plex
/
DISK4
/
BUSIN_09
/
CGZDC31A.ZIP
/
CG19.DOC
< prev
next >
Wrap
Text File
|
1992-10-19
|
39KB
|
987 lines
Chapter 19 - Graphics Program
The Capital Gainz Graphics Program lets you graph the data you've
recorded in Capital Gainz. You can get to the Graphics Program from
Capital Gainz, or start it from the DOS command line:
CGGRAPH
19.1 Generating Graphs
Like Capital Gainz, the Graphics Program is easy to use:
o Select the item to be graphed and the date range.
o The selected data is processed. The time required depends on the
number and complexity of the items. For instance, requesting a
price graph for one security for a one year period will be fast,
but requesting the performance charts for a large, active portfolio
can take a couple of minutes.
===>>> o Based on the range of values and screen size, the Graphics
Program calculates appropriate scaling factors. For
instance, if a security's price ranges from $10 to $20
between the specified dates, then the price axis of the
graph will only go from $9 to $21. Similarly, the width of
bars in bar charts will be small enough to include as many
as possible on one screen. You aren't required to specify
vertical and horizontal increments or values. Instead, the
Graphics Program calculates the best ranges, and scales the
values accordingly. This lets you focus on the output,
rather than the setup.
o The graph is displayed.
These keys are displayed at the bottom of the screen (you can toggle
the status line on/off with Enter):
o More: show the previous or next screen, for multi-screen output.
o PgUp:Prev, PgDn:Next: graph the previous or next security or
portfolio.
o Ctrl-P:Print: print the graph.
o Esc:Exit: exit from the graph so you can select another security or
portfolio.
Capital Gainz Users Manual 19-1
19.1.1 Viewing Graphs
Some graphs may require multiple screens. If so, you can scroll
through them as indicated at the bottom of the screen:
===>>> o More: If preceded by a left arrow on the bottom left, then
you can use the Left Arrow key to scroll to the previous
screen. If followed by a right arrow on the bottom right,
then you can use the Right Arrow key to scroll to the next
screen.
Also, there are the following shortcut keys:
===>>> o PgUp:Prev, PgDn:Next: Generate the same graph for the
previous or next security or portfolio.
For graphs that require multiple screens, PgUp:Prev is only displayed
on the first screen, and PgDn:Next on the last screen. However, you
can use them at any time.
19.1.2 Printing Graphs
To print the displayed graph, hit the Print key. Then select the
output destination:
o Printer: print the graph to your printer, using the current printer
settings.
o File: print the graph to a file, after first specifying a file
name. If you specify a file with a .PCX extension, the file is
printed in PCX format. Otherwise, it's printed in the currently
selected printer's format. If you change your mind and don't want
to print, leave the file name blank.
PCX files let you store your graphs for quick viewing, using the
View File option from the Main Menu or a graphics viewer such as
CompuShow.
The bottom line is erased while printing, since the print routines
grab the entire screen. It's redisplayed when the graph has been
transferred to the output device.
19.2 Initialize
When you start up the Capital Gainz Graphics Program for the first
time, you must select your adapter and printer type from tables. The
program inspects your hardware and highlights the apparent adapter
type, but you should verify it. These choices can be changed later
from the User Settings Form.
The Graphics Program works best with color monitors, since it's
easier to distinguish multiple items on graphs.
19-2 Capital Gainz Users Manual
19.3 Graphics Menu
[[Screen not in online version of documentation.]]
The Graphics Menu offers the following choices:
o Price Graphs - generate line charts of security prices.
o Total Return - generate area charts that break down the price and
distribution components of a security.
o Portfolio Allocation - generate pie charts showing portfolio
allocation.
o Security Cost/Value - generate bar charts showing the cost and
value of securities in a portfolio.
o Your Performance - generate pie charts showing your performance for
securities in a portfolio.
o User Settings - modify various graph parameters, such as colors and
fill type.
o Exit - exit from the Graphics Program. Esc will not exit from the
Main Menu.
At the top of the menu, the current version number is displayed.
At the bottom, the remaining conventional memory is displayed. A
warning is issued if you get low on memory.
Function keys at the bottom of the screen are:
o Enter - select the highlighted choice.
o F7:Capital Gainz - switch to Capital Gainz.
o F8:Utilities - switch to the Capital Gainz Utility Program.
o F10:GoTo DOS - suspend the Graphics Program and invoke the DOS
Shell.
19.4 Common Screens
The common forms and tables used in the Graphics Program are
described in this section. Later sections will refer back to here.
19.4.1 Date Range
The Select Date Range key on the forms lets you restrict the
graphs to data within a specified range of dates. The Date Form is
described in Chapter 6. A date range stays in effect until it is
Capital Gainz Users Manual 19-3
explicitly changed.
19.4.2 Global Securities Form
Some graphs require you to select one or two global securities.
[[Screen not in online version of documentation.]]
The Global Securities Form accepts:
o (Required) The Global Symbol of the first security to graph. If you
leave this blank or enter an invalid symbol, the Global Security
Lookup Table pops up. After a valid entry, the global security's
name is displayed. Also, the second security's symbol and name are
set to the same values.
o (Optional) The Global Symbol of the second security to graph. If
you enter an invalid symbol, the Global Security Lookup Table pops
up. After a valid entry, the global security's name is displayed.
If you leave this symbol set to the same value as the first symbol,
then only a single security is graphed.
Function keys at the bottom of the screen are:
o F2:Select Date Range - enter a range of dates to restrict the
graphed data.
19.4.2.1 Lookup Global Security
[[Screen not in online version of documentation.]]
The Global Security Lookup Table is brought up if you enter a
blank or invalid security symbol. This table shows the symbol and name
of each global security. If you entered an invalid security symbol,
the cursor is positioned on the security symbol that best matches the
entered symbol. Function keys are:
o Enter:Select - select the highlighted local security, inserting its
symbol into the form's symbol field.
o Esc:Exit - leave the table without selecting a local security.
19.4.3 Portfolio Form
Several graphs require you to select a portfolio.
[[Screen not in online version of documentation.]]
The Portfolio Form accepts:
o (Required) The ID of the Portfolio to graph. If you leave this
blank or enter an invalid ID, the Portfolio Lookup Table pops up.
19-4 Capital Gainz Users Manual
After a valid entry, the portfolio's name is displayed.
Function keys at the bottom of the screen are:
o F2:Select Date Range - enter a range of dates to restrict the
graphed data.
19.4.3.1 Lookup Portfolio
[[Screen not in online version of documentation.]]
The Portfolio Lookup Table is brought up if you enter a blank or
invalid portfolio ID. This table shows the ID and name of each
portfolio. Function keys at the bottom of the screen are:
o Enter:Select - select the highlighted portfolio, inserting its ID
into the form.
o Esc:Exit - leave the table without selecting a portfolio.
19.5 Price Graphs
Price Graphs consist of a line chart showing the price histories
of one or two securities. You first select the global symbol or
symbols and date range, using the Global Securities Form described
earlier.
19.5.1 One Security
[[Figure not in online version of documentation.]]
If you only graph one security, the Graphics Program:
o Processes the Price History File, building a table of data to be
graphed based on the specified date range.
o Displays the security's symbol and name, and the high and low
prices and the dates they occurred in the date range. If you
specified to use icons, the icon marking the price points is
displayed to the left of the symbol.
o Draws solid vertical lines for each month in the date range. If a
small enough range was specified, dashed lines indicate each
Friday. The solid lines are labeled at the bottom with the first
letter in the name of the month. January uses the alternate label
color in order to stand out.
o Draws solid horizontal lines for each price level. The price
increments are chosen based on the data being graphed. The
increment will usually be $1 or $2, but if the security's price
Capital Gainz Users Manual 19-5
varies a lot, the increment could be $5, $10, or some other value.
If there is a small price variance, dashed lines indicate half or
quarter point increments. The solid lines are labeled with the
corresponding price level.
o Generates the price line, using the data from the Price History
File.
o Generates lines indicating the average, standard deviation, and
best fit lines. These are based on monthly averages, as described
in Chapter 20.
===>>> To turn off the grid, or to not draw the best fit, average, and
standard deviation lines, set the colors in the User Settings Form to
NO COLOR.
19.5.2 Two Securities
[[Figure not in online version of documentation.]]
The advantage of displaying two securities at once is that you can
observe similarities and differences in the movement of prices. One
security could be an average, like the Dow Jones Industrial Average.
Most of the steps described above are performed for each security.
Besides having two price lines:
o Both securities are listed in the header.
o The first security's prices are listed to the left of the grid, and
the second security's prices are listed to the right. Thus, even
though the prices may differ significantly, the lines will be
superimposed for easier comparison.
o If you specified all dates, then the second security is constrained
by the first and last dates found for the first security.
o The grid and the best fit, average, and standard deviation lines
are not displayed. Adding these clutters up the graph beyond
recognition.
o In order to distinguish the two lines on printouts or monchrome
monitors, different icons are automatically used to mark price
points. The icons used are listed to the left of the symbols in the
header.
If you use the PgUp:Prev and PgDn:Next keys to move between
securities, the first security remains constant, and the second one
changes.
19-6 Capital Gainz Users Manual
19.6 Total Return Graph
[[Figure not in online version of documentation.]]
The Total Return Graph consists of an area graph for a security's
total return, broken down into price and distribution components. This
graph shows the value of a single share, including price and
reinvested distributions. You first select the global symbol and date
range, using the Global Securities Form described earlier. You can
only select a single security for this graph.
After you select a security, the Graphics Program:
o Processes the Price History File, building a table of data to be
graphed based on the specified date range.
o Displays the security's symbol and name, and the high and low
values (not prices) and the dates they occurred in the specified
range.
o Labels the bottom of the graph with the first letter in the name of
the month. January uses the alternate label color in order to stand
out.
o Labels the left of the graph with value increments chosen based on
the data being graphed. The increment will usually be $1 or $2, but
if the share value varies a lot, the increment could be $5, $10, or
some other value.
o Generates the price line and share value line, using the data from
the Price History File. The share value line represents the
reinvested value of one share of the security.
o Fills in the top section, representing reinvested distributions,
and the bottom section, representing price.
===>>> This is referred to as an area graph in that there are two
distinct areas: one representing the reinvested distribution component
and the other representing the price component. Together, they
represent the total value of one share, with distributions reinvested.
Income oriented securities will maintain level or moderately varying
price lines, and increasing total value lines. Growth oriented
securities will have small distribution components, and thus will
differ little from normal price graphs.
The total return calculation is described in detail in Chapter 20.
Mutual fund companies often quote the total return figure, since these
investment vehicles allow easy reinvestment of distributions. While
analyzing a security's price is valuable, you really need total return
to get the complete picture.
Capital Gainz Users Manual 19-7
19.7 Portfolio Allocation Graph
[[Figure not in online version of documentation.]]
Portfolio Allocation Graphs consist of pie charts showing how your
funds are allocated. Three different views are presented: by security
class, by security type, and by security. You select the portfolio
using the Portfolio Form.
After you select a portfolio, the Graphics Program:
o Processes the Local Security File, building a table of data to be
graphed.
o Displays the header, showing the selected portfolio's ID, name, and
value.
o Builds pie charts showing portfolio allocation by: security values,
security type values, and security class values, using the data
from the Local Security File. Each pie chart uses the entire
screen, so you need to scroll between them with the Left Arrow and
Right Arrow keys.
===>>> Pie slices are easier to distinguish if they are displayed in
color. Listed values are keyed to the associated pie slice's color.
However, to print the graphs on a non-color printer, a pattern fill is
necessary. Thus, a Fill Type setting of both colors and patterns is
suggested. Maximum # Slices limits the number of pie slices displayed.
Excess slices, and slices less than 2% of the total, are rolled into
the last slice, and labeled Other. Thus, if you had 20 securities, and
only specified 15 slices, the 6 securities with the smallest total
holdings are lumped into the 15th slice.
19.8 Security Cost/Value Graph
[[Figure not in online version of documentation.]]
The Security Cost/Value Graph consists of bar charts showing the
cost and current value of local securities in a portfolio. You first
select the portfolio, using the Portfolio Form described earlier.
After you select a portfolio, the Graphics Program:
o Processes the Local Security File, building a table of data to be
graphed.
o Displays the header, showing the portfolio ID, name, amount, and
value.
o Draws solid horizontal lines and labels them with values. The
values range from 0 to just above the highest value found. The
increments are chosen based on the data being graphed. Depending on
19-8 Capital Gainz Users Manual
the range of data, the increment can be $50, $100, $500, or $1000.
o Using the data from the Local Security File, displays the amount
(left) and value (right) bars, and labels the bars with the local
security symbols. Use the Right Arrow and Left Arrow keys to
display more securities, if they all don't fit on one screen.
===>>> The Bar Type is used to determine whether the bars are three-
dimensional filled, three-dimensional outline, or plain two
dimensional bars. If they are not three-dimensional filled, then the
Fill Type setting is also used. You can choose not to Include Cash
types in the graph. Cash types generally maintain a constant price, so
the cost and value bars would be identical. If you are holding a lot
of cash in a money market fund, then it could skew the range of values
too high. This makes it hard to distinguish the performance of other
securities, since their bars are scaled smaller.
19.9 Performance Graph
[[Figure not in online version of documentation.]]
Performance Graphs consist of pie charts showing your performance
with each security in a portfolio. Two pie charts are generated for
each security. The first one shows the ending value, the amount of
distributions, and the amount of sales. The second one shows the
beginning value, the amount of purchases, and the return. These two
sets of three components are equal:
begin_value + buy_amt + return = end_value + distr_amt + sell_amt
To generate this graph, you first select the portfolio and date range,
using the Portfolio Form described earlier.
After you select a portfolio, the Graphics Program:
o Processes the activity logs, building a table of data to be
graphed. This can take awhile, depending on how much activity has
been recorded.
o Displays the header, showing the selected portfolio's ID, name, and
current value.
o Displays the security symbol, name, and current value. Displays the
pie chart showing the ending value, distribution amount, and
selling amount. Displays the pie chart showing the beginning value,
purchase amount, and return amount. The actual values of each
component are displayed below the pie charts. Each security uses
the entire screen, so you'll use the Right Arrow and Left Arrow
keys to move between securities.
===>>> Pie slices are easier to distinguish if they are displayed in
color. Listed values are keyed to the associated pie slice's color.
Capital Gainz Users Manual 19-9
However, to print the graphs on a non-color printer, a pattern fill is
necessary. Thus, a Fill Type setting of both colors and patterns is
suggested.
===>>> The size of the return slice in relation to the pie is usually
not reflected by the return percentage. Partial period holdings are
annualized to calculate the return percentage.
19.10 Graphics User Settings
The colors and other values that you set in the Graphics User
Settings Form persist between sessions. The same User Settings File is
used by both Capital Gainz and the Graphics Program.
[[Screen not in online version of documentation.]]
When an entry requires a color value, the name of the color is
used. Entering a blank or invalid value causes the Color Table to pop
up for you to choose from.
Function keys at the bottom of the screen are:
o Form Accept - accept all entries, the same as hitting Enter on each
field.
o Form Reject - exit immediately, the same as hitting Esc to back out
of the form.
o F2:Setup Printer - change the settings for your selected printer.
19.10.1 All Graphs
These settings apply to all, or several, graphs.
o Graphics Adapter - the type of graphics adapter for your computer.
The Graphics Program can usually determine the correct adapter
type, but you should verify the type it suggests the first time you
run the program. If you change your monitor, you may need to change
this value.
o Label Color - the color of most labels used in graphs. This
includes the top lines that show portfolio and security names. This
can't be set to NO COLOR. Default is LT CYAN.
o Alt Label Color - for contrast, an alternate label color is
sometimes used. For instance, when the bottom line indicates there
are more screens that you can scroll to, the More keyword uses the
alternate label color to stand out. This can't be set to NO COLOR.
Default is YELLOW.
o Bar Type - the type of bar used in bar charts. You can experiment
to determine which one you like best. Default is 3D-OUTLINE, which
19-10 Capital Gainz Users Manual
shows the patterns well for printouts.
o Grid Color - the color of the X-Y grid in the charts. You can set
this to NO COLOR if you don't want a grid. Default is CYAN.
o Fill Type - the type of fill to use for pie slices, bars, and
areas. You can fill with just colors, just patterns, or both. If
you want to print the graphs, you should use pattern or pattern and
color fill. Default is BOTH.
o Printer Type - the type of printer attached to your computer. The
Graphics Program assumes you will use a dot matrix printer, so
verify the type it suggests the first time you run the program. If
you change your printer, you may need to change this value.
o Printer Code - the code for the dot matrix manufacturer/model
selected. If you change your printer, you may need to change this
value. The printer types are described below.
o Append Reports - determines whether to append or overwrite files
with graphics output. This is similar, but separate, from the
Append Reports setting in Capital Gainz. You may want to treat text
and graphics output separately. Default is NO.
19.10.2 Price Graph
o Price Line #1 - the color of the first security's price line,
symbol and name in the header, and price labels. Default is YELLOW.
o Price Line #2 - the color of the second security's price line,
symbol and name in the header, and price labels. Default is WHITE.
o Use Line Icons? - whether to display icons at price/date points.
Default is NO. (They are used if two securities are graphed
regardless of this setting.)
o Best Fit Line Color - the color of the best-fit line. This dashed
line can be turned off by choosing NO COLOR. Default is LT CYAN.
(Not displayed if two securities are graphed.)
o Average Line Color - the color of the average line. This dashed
line can be turned off by choosing NO COLOR. Default is LT BLUE.
(Not displayed if two securities are graphed.)
o Standard Deviation? - whether to display the dashed standard
deviation lines. Default is YES. (Not displayed if two securities
are graphed.)
Capital Gainz Users Manual 19-11
19.10.3 Total Return Graph
Colors are not used if Fill Type is just patterns.
o Price Color - the color of the price area. Default is LT BLUE.
o Distr Color - the color of the distribution area. Default is LT
GREEN.
19.10.4 Portfolio Allocation Graph
Different colors are used for the slices, unless Fill Type is just
patterns. Different fill types are used for the slices, unless Fill
Type is just colors.
o Maximum # Slices - the maximum number of pie slices to display.
Anything over about 15 is difficult to read. Excess slices are
rolled into the last slice, and labeled Other. Default is 15.
19.10.5 Security Cost/Value Graph
Colors are not used if Fill Type is just patterns.
o Cost Color - the color of the cost bar. Default is LT BLUE.
o Value Color - the color of the value bar. Default is LT GREEN.
o Include Cash? - whether or not to include securities that are
classified as cash security types, since cash types maintain a
constant price. For the Security Cost/Value Graph, the amount and
value bars for cash types may skew the value range too high, making
it hard to distinguish other securities' amount and value bars.
Default is YES.
19.10.6 Performance Graph
Colors are not used if Fill Type is just patterns.
o End - the ending value pie slice color. Default is CYAN.
o Sell - the selling amount pie slice color. Default is BROWN.
o Distr - the distribution amount pie slice color. Default is YELLOW.
o Begin - the beginning amount pie slice color. Default is LT
MAGENTA.
o Buy - the purchase amount pie slice color. Default is LT CYAN.
19-12 Capital Gainz Users Manual
o Return(+) - the pie slice color for positive returns. Default is LT
GREEN.
o Return(-) - the pie slice color for negative returns. Default is LT
RED.
19.10.7 Lookup Adapter
[[Screen not in online version of documentation.]]
The Adapter Lookup Table lists adapters supported by the Graphics
Program:
o Hercules: monochrome, Hercules-compatible graphics.
o CGA Color and Mono: poor resolution. (Not Supported)
o EGA Color and Mono: color or monochrome EGA, good resolution.
o VGA Color and Mono: color or monchrome VGA, very good resolution.
VGA Color should work for Super-VGA or other high-end monitor types.
You must set the adapter type before you can run the Graphics
Program. When you run it for the first time, you are asked for your
adapter type. The Graphics Program checks your hardware setup and
highlights the apparent type. If you don't have a graphics adapter,
you can't use the Graphics Program.
Function keys at the bottom of the screen are:
o Enter:Select - select the highlighted adapter, inserting it into
the form's adapter field.
o Esc:Exit - leave the table without selecting an adapter.
19.10.8 Lookup Color
[[Screen not in online version of documentation.]]
The Color Table pops up if you enter a blank or invalid color
name. Highlight the color you want, and hit Enter to select it and
transfer it back to the form. Each color is illustrated to the right
of the color name. The NO COLOR value means not to display the
associated item. For instance, you could turn off the grid for the
price graph if you don't want it displayed.
Function keys at the bottom of the screen are:
o Enter:Select - select the highlighted color, inserting it into the
Capital Gainz Users Manual 19-13
color field.
o Esc:Exit - leave the table without selecting a color.
19.10.9 Lookup Printer
[[Screen not in online version of documentation.]]
Printer Lookup Table lists printer types supported by the Graphics
Program:
o Dot Matrix - you must also select the manufacturer/model.
o PCL Laserjet - this refers to Hewlett Packard's Printer Command
Language. Most laser printers can emulate the HP Laserjet. If you
have an HP Thinkjet, use this printer type.
o PCL Paintjet - this is similar to the PCL Laserjet, but refers to
the Hewlett Packard Paintjet and compatibles.
o Postscript - this refers to printers that use the postscript
graphics commands.
===>>> For each of the printers, some of the parameters can be
altered, as described below. However, the default settings usually
work best.
Function keys at the bottom of the screen are:
o Enter:Select - select the highlighted printer, inserting it into
the printer field.
o Esc:Exit - leave the table without selecting a printer.
19.10.10 Setup Printer
Each of the printers supported by the Graphics Program has a form
that allows you to change the configuration. Each of these forms
includes the following function keys at the bottom:
o Form Accept - accept all entries, the same as hitting Enter on each
field.
o Form Reject - exit immediately, the same as hitting Esc to back out
of the form.
o F2:Defaults - resets the printer configuration to the default
settings.
===>>> Notice that printer selection and setup are two distinct
19-14 Capital Gainz Users Manual
operations. The setup form displayed is specific to the printer you
have selected.
The values set in the printer setup forms are not written to disk
until the Graphics User Settings Form is accepted.
19.10.10.1 Setup Dot Matrix Printer
[[Screen not in online version of documentation.]]
The Dot Matrix Setup Form lets you alter the dot matrix printer
settings:
o Printer - the printer's manufacturer and model. If you leave this
blank, or enter an invalid value, the Dot Matrix Lookup Table,
described below, pops up. After selecting a valid printer, the
default values are displayed.
o Change Codes? - this field lets you change the remaining values.
The following values are set based on the printer you selected.
o Paper - horizontal or vertical. This is not the same as
LANDSCAPE/PORTRAIT.
o Print Head Bit 0 Top? - whether bit 0 is at the top or bottom of
the print head. NO means bit 0 is at the bottom.
o Epson 3-Color? - whether or not your printer supports Epson 3-color
mode.
o Pre-Page Codes - ASCII codes sent to the printer before printing a
page.
o Pre-Line Codes - ASCII codes sent to the printer before printing a
line.
o Post-Line Codes - ASCII codes sent to the printer after printing a
line.
o Post-Page Codes - ASCII codes sent to the printer after printing a
page.
Capital Gainz supports a number of popular dot matrix printers.
[[Screen not in online version of documentation.]]
Select the closest matching printer. If your printer is not listed, it
should at least be compatible with one of the Epson models. When you
return to the Setup Dot Matrix Printer screen, the codes for the
selected printer are displayed. If you need to alter these codes, you
should refer to your printer manual or consult with the manufacturer.
Capital Gainz Users Manual 19-15
19.10.10.2 Setup Laserjet/Paintjet Printer
[[Screen not in online version of documentation.]]
The PCL Setup Form lets you alter HP PCL Laserjet and Paintjet
settings:
o Reset Before Print? - whether to issue a printer reset before
printing. Default is YES.
o Formfeed After Print? - whether to output a formfeed after printing
a page. Default is YES. By setting this to NO, you can superimpose
one graph on top of another.
o Correct Aspect Ratio? - the screen aspect ratio is 1:1.35, but the
density of dots on the screen is not uniform. Without correcting
for the aspect ratio, the output would be elongated due to the
laser printer's uniform printing density. Default is YES.
o Paper Orientation - landscape or portrait mode. Default is
LANDSCAPE.
o Reverse Black/White? - when printed, the graph uses black figures
and characters on a white background. This setting lets you reverse
the black and white, so white figures and characters are printed on
a black background. Default is NO. (Black on white is printed.)
o Color? (Paintjet Only) - whether or not you have a color Paintjet
compatible printer. Default is NO.
o Horizontal Offset (Dots) - printing offset from the left of the
page. Default is 0.
o Vertical Offset (Dots) - printing offset from the top of the page.
Default is 0.
o Dot Density - the larger the dot density, the smaller the graph.
Different settings are available for Laserjets and Paintjets. For
Laserjets, the default is 75. For Paintjets, the default is 90.
If you need to alter these values, you should refer to your printer
manual or consult with the manufacturer.
19.10.10.3 Setup Postscript Printer
[[Screen not in online version of documentation.]]
The Postscript Setup Form lets you alter postscript printer
settings:
o Paper Orientation - landscape or portrait mode. Default is
LANDSCAPE.
19-16 Capital Gainz Users Manual
o Reverse Black/White? - when printed, the graph uses black figures
and characters on a white background. This setting lets you reverse
the black and white, so white figures and characters are printed on
a black background. Default is NO. (Black on white is printed.)
o Horizontal Offset (Points) - printing offset from the left of the
page, in 1/72 inch. Default is 50.
o Vertical Offset (Points) - printing offset from the top of the
page, in 1/72 inch. Default is 75.
o Horizontal Scale - horizontal scale factor percentage. Default is
100.
o Vertical Scale - vertical scale factor percentage. Default is 100.
o Density (Dots/Inch) - the larger the dot density, the smaller the
graph. The default is 90.
19.11 View File
===>>> The View File option is nearly the same as Capital Gainz'
Select File option, described in Chapter 6. The only difference is you
can view graphics files saved in PCX format. If the selected file does
not have a .PCX extension, then the regular text file viewer is used.
When you print a graph to a file, it is saved in PCX format if you
specify a .PCX file extension.
When viewing a PCX file, you can scroll to the Prev or Next file,
or Print the file. The function line is initially toggled off. You can
turn it on/off with the Enter key.
19.12 Switching Programs
Switching between programs is discussed in Chapter 6.
19.13 Shell to DOS
Shelling to DOS is discussed in Chapter 6.
Capital Gainz Users Manual 19-17
