home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Unsorted BBS Collection
/
thegreatunsorted.tar
/
thegreatunsorted
/
texts
/
cell_nfo
/
DATA
/
D_TEL05.TXT
< prev
next >
Wrap
Text File
|
1993-04-11
|
3KB
|
82 lines
DIAMONTEL MESA 95, 100
NOTES: These are a dual NAM units.
The ESN prefix is 134 decimal, 86 hex.
See file MITSTEST.TXT for test mode access.
NAM programing:
1. Press PWR key for one second to turn on phone.
2. Wait for wake up cycle to end and display to clear.
3. Within ten seconds press and hold the CLR key while entering
8 2 9 1 1 1 2 (reset code).
4. Release CLR.
5. The phone will display the first data entry.
6. Press the SEND key to store information and increment the step number.
7. Press CLR to correct any item.
8. At any time press END to complete programing and exit.
PROGRAMING DATA:
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
01 0 OR 1 duAL no 0=1 NAM, 1=2 NAMS
02 10 DIGITS no1 NAM 1 MIN (AREA CODE AND TEL#)
03 00000 - 32767 SId1 NAM 1 SYSTEM ID
04 0 OR 1 LU1 NAM 1 LOCAL USE MARK
05 0 OR 1 E1 NAM 1 MIN MARK
06 333 OR 334 IPCH1 NAM 1 INITIAL PAGING CHANNEL
07 2 DIGITS AACCOLC1 NAM 1 ACCESS OVERLOAD
08 0 OR 1 PS1 NAM 1 PREFERRED SYSTEM
09 00 TO 15 GIM1 NAM 1 GROUP ID (10 FOR USA)
10 0 TO 7 t InC1 NAM 1 TIMER INCREMENT (SEE NOTES)
If you selected 0 in step one go to step 20.
11 10 DIGITS no2 NAM 2 MIN (AREA CODE & TEL#)
12 00000 - 32767 Sid2 NAM 2 SYSTEM ID
13 0 OR 1 LU2 NAM 2 LOCAL USE MARK
14 0 OR 1 E2 NAM 2 MIN MARK
15 0333 OR 0334 IPCH2 NAM 2 INITIAL PAGING CHANNEL
16 00 TO 15 ACCOLC2 NAM 2 ACCESS OVERLOAD CLASS
17 0 OR 1 PS2 NAM 2 PREFERRED SYSTEM
18 00 TO 15 GIM2 NAM 2 GROUP ID (10 IN USA)
19 0 TO 7 t InC2 NAM 2 TIMER INCREMENT (SEE NOTES)
20 0000 TO 9999 SECUrity SECURITY CODE
21 0 OR 1 EE DTMF SIGNALLING
22 0 OR 1 dt VOX OPERATION
23 0 OR 1 HF HANDS FREE
24 0 OR 1 InHIbIt ROAM INHIBIT
25 0 OR 1 CtonE CONTINUOUS DTMF
26 0 OR 1 dIS CU DISABLE CUMULATIVE TIMER RESET
27 0 OR 1 dIS IGn SEnSE DISABLE IGNITION SENSE
28 0 OR 1 DUAL HS DUAL HANDSETS
NOTES:
To install lock code: With phone out of programing mode press FCN, 1,
NNNN LLL CLR (where NNNN is 4 digit security code and LLL is new lock code).
STEP 9 AND 17, TIMER INCREMENTS:
00 = 60 seconds
01 = 30 seconds
02 = 20 seconds
03 = 15 seconds
04 = 12 seconds
05 = 10 seconds
06 = 6 seconds
07 = 1 seconds
LOCK: F 5. UNLOCK: Enter 3 digit code.
SYSTEM SELECT: Press FCN #, then # to scroll, CLR to exit.