home *** CD-ROM | disk | FTP | other *** search
/ The Unsorted BBS Collection / thegreatunsorted.tar / thegreatunsorted / texts / anarchy_text_a-l / expman7.txt < prev    next >
Text File  |  1990-10-02  |  2KB  |  71 lines

  1.  
  2.  
  3.  
  4. =+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
  5.  
  6.          THE JUG BAND BOMB
  7.         
  8.         BY THE GRAY MOUSER
  9.  
  10. =+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
  11.  
  12. THIS ONE IS SHORT AND SWEET.
  13.  
  14. 1) GET AHOLD OF A GLASS JUG.
  15. 2) PUT IN A FEW DROPS OF GASOLINE.
  16. 3) CAP THE TOP.
  17. 4) NOW TURN THE JUG AROUND TO COAT THE INNER SURFACES AND EVAPORATES.
  18. 5) ADD A FEW DROPS OF POTASSIUM PERMANGANATE.(YOU CAN GET THIS REAL
  19. EASY FROM A SNAKE-BITE KIT.)
  20. 6) THE BOMB IS DETONATED BY THROWING OR FORCIBLY ROLLING AGAINST A SOLID
  21. OBJECT.
  22.  
  23. WHEN THIS SUCKER GOES OFF IT IS THE
  24. SAME AS A HALF STICK OF DYNAMITE.
  25.  
  26.             OTHER UNLAWFULS           
  27.      Written by: The Hoe Hopper      
  28.   Distributed by The Blue Buccaneer  
  29.   [>   Call the EXODUS AE Line   <]  
  30.  
  31.  
  32.  
  33. Carbide Bomb
  34. ------------
  35.  
  36.      This is EXTREMELY DANGEROUS. Exer-cise extreme caution....
  37.      Obtain some calcium carbide. This is the stuff that is used in carbide
  38. lamps and can be found at nearly any hardware store. Take a few pieces of
  39. this stuff (it looks like gravel) and put it in a glass jar with some water.
  40. Put a lid on tightly. The carbide will react with the water to produce acedy-
  41. lene carbonate which is similar to the gas used in cutting torches. Eventually
  42. the glass with explode from internal pressure. If you leave a burning rag
  43. nearby, you will get a nice fireball!
  44.  
  45. Portable Grenade Launcher
  46. -------------------------
  47.  
  48.       If you have a bow, this one is foryou. Remove the ferrule from an 
  49. aluminum arrow, and fill the arrow with black powder (I use grade FFFF, it
  50. burns easy) and then glue a shotshell primer into the hole left where the
  51. ferrule went. Next, glue a BB on the primer, and you are ready to go!
  52.       Make sure no one is nearby. Littleshreds of aluminim go everywhere.
  53.  
  54.  
  55. Auto Exhaust Flame Thrower
  56. --------------------------
  57.  
  58.      For this one, all you need is a car, a sparkplug, ignition wire and a
  59. switch. Install the spark plug into the last four or five inches of
  60. the tailpipe by drilling a hole that the plug can screw into easily. 
  61.      Attach the wire (this is regular insulated wire) to one side of the 
  62. switch and to the spark plug. The other side of the switch is attached to the 
  63. positive terminal on the battery. With the car running, simply hit
  64. the switch and watch the flames fly!!!
  65.   Again be careful that no one is behind you! I have seen some of these flames
  66. go 20 feet!!!
  67.  
  68.  
  69.  
  70.                                                  
  71.