home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Unsorted BBS Collection
/
thegreatunsorted.tar
/
thegreatunsorted
/
texts
/
anarchy_text_a-l
/
anarchy1.mag
< prev
next >
Wrap
Text File
|
1989-11-30
|
45KB
|
1,091 lines
Title: Anarchy Today
Date: 5/21/89
Time: 3:26 pm
_______________________________________________________________________________
| |
| |
| A N A R C H Y T O D A Y |
| |
| I S S U E # 1 |
| |
| B R O U G H T T O Y O U B Y - |
| |
| J A C K T H E R I P P E R |
| |
|_____________________________________________________________________________|
-=-=-=-=-=-
-*PRELUDE*-
-=-=-=-=-=-
Welcome to the first issue of "Anarchy Today". This is part of an
ongoing newsletter. Due to the fact that incompetance and the lack of good
writers, I have deceided to write the entire first issue myself. However
anyone is welcome to submit articles to the magazine. You may upload your
submissions to "The Anarchist's Underground 713-890-0561". Also when asking
for validation please state that you wish to submit articles, and also note
that blank questionaires result in deletion.
Call London at Midnight Home of Anarchy Today and
OC...........713-523-3733_______________________________________________________
_______________________
| |
| |
| Anarchy Today |
| |
| Article #1 Issue #1 |
| |
| Acetone Peroxide Explosive |
| |
| Brought to you by - |
| |
| Jack The Ripper |
| |
|_____________________________________________________________________________|
This explosive can not only be used as an explosive, but also as a
detonater. I will go into this one very detailed and all my following articles
will be the same.
-=-=-=-=-=-
-MATERIALS-
-=-=-=-=-=-
Name Source
---- ------
Hydrogen Peroxide Hair Bleach, Drug Stores
and Hair supply Stores
Acetone Hardware Stores and Drug
Stores
Sulfuric Acid Clear battery acid
boiled until white fumes
appear.
Eye Dropper or Syringe w/ glass tube
Graduated Cylinder (cc or ml)
Thermometer (0 to 100 degrees C)
Glass Containers
Large Pan
Ice and Salt
Water
Paper Towels
All the above can easily be commandeered from your school laboratory for your
own purposes.
-=-=-=-=-=-
-PROCEDURE-
-=-=-=-=-=-
1) Mix 30 ml of Acetone and 50ml of Hydrogen Peroxide into a glass container
and mix thoroughly.
2) Cool it by plaicing it in a larger container containing ice, salt, and
water. Now cool it to 5 degrees Celcius.
3) Add 2.5 ml of concentrated ulfuric acid to the mixture slowly (drop by
drop w/ the eye dropper). Stir the mixture w/the thermometer keeping the
the temperature between 5-10 degrees celcius. If the temperature rises
don't shit just stop adding the sulfuric acid until it cools down then
start adding it again.
4) Now that you got all the acid into the mixture continue stirring for
another 5 minutes.
5) Now let the mixture stand for 12 to 24 hours in the ice/salt bath.
6) After 12 hours the crystals of acetone peroxide will precipitate out of the
once clear solution. Precipitation should be done after 24 hours.
7) Now filter out the crystals$through a paper towel attached to a jar with a
rubber band. Then after that wash the crystals by pouring ice cold water
over them, letting the water rinse the crystals and filter down through the
paper towel into the jar.
8) Select a container and allow them to dry.
-=-=-=-
-USES!-
-=-=-=-
Now this can be used as an explosive however it is the simplest detonater
that I have ever encountered. It works best in 2.5 inch lengths of brass
tubing with one end sealed. The only drawback is that it must be used quickly
as Acetone Peroxide deteriorates quickly. I have found that keeping it
refrigerated seems to make it last longer however for optimum effects it
should be used 7 days after manufacture at the latest. It also can be used
to detonate almost every Ammonium Nitrate compound, and Ammonium Nitrate
itself for that matter.
Later...
Jack The Ripper
_______________________________________________________________________________
| |
| |
| Anarchy Today |
| |
| Article #2 Issue #1 |
| |
| Fertilizer/Hydrazine Liquid Explosive |
| |
| Brought to you by - |
| |
| Jack The Ripper |
| |
|_____________________________________________________________________________|
This one is a killer it is more powerful and more brisant than C-4.
However you need a blasting cap to detonate or a homemade compound detonater.
Namely Acetone Peroxide detonaters can be used here or Mini-Compound
Detonaters.
-=-=-=-=-=-
-MATERIALS-
-=-=-=-=-=-
Name Source
---- ------
Ammonium Nitrate Fertilizer (no less than Farm and Feed Stores
32% Nitrogen) or pure
Anhydrous Hydrazine Chemical Supply House
(Be careful with this one it is very reactive!!!)
Large Mixing Container
*GLASS* stirring rod
Storage Container w/tight lid
Blasting Cap or Compound Detonater
-=-=-=-=-=-
-PROCEDURE-
-=-=-=-=-=-
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
*NOTE* mixing these two is the same as baking soda and vinegar so the reaction
is very effervescant and can bubble over the top so use a jar 6 times the
volume of the Hydrazine! Also large volumes of ammonia gas are realeased when
these two are mixed so wear a gas mask or be upwind of the mixing.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
1) Pour into the container the an amount of Anhyrdrous Hydrazine equal to the
amount of explosive required.
2) Ammonium Nitrate Prilled or Powdered is added a teaspoon at a time to the
container, then wait for it to dissolve (stirring constantly), and then add
more.
3) Continue the above process until the ammonium nitrate no longer dissolves
into the hydrazine, and don't worry about the small amount of ammonium
nitrate left over.
4) Now your basically done and you have an explosive more powerful than any
military explosive.
5) To make it more powerful add 20% aluminum powder to the mixture (100 mesh
or finer)
-=-=-=-
-USES!-
-=-=-=-
This mixture has unique absorbtion and retention properties, and can be
poured directly on the ground for a liquid land mine. This type of land mine
is totally disquised and cannot be noticed, and all you need to do is bury a
compound detonater in the ground, which can be detonated by a step switch etc.
This type of land mine remains detonatable for up to four days regardless of
rain etc... It can also be poured into a container and used as a bomb.
Later...
Jack The Ripper
_______________________________________________________________________________
| |
| |
| Anarchy Today |
| |
| Article #3 Issue #1 |
| |
| RDX Explosive |
| |
| Brought to you by - |
| |
| Jack The Ripper |
| |
|_____________________________________________________________________________|
The reason I wrote this is because the other file I saw on how to make
RDX was so shabby and lame it was probably written by an eight year old mental
patient. So here is mine easy! Straightforward! Comphrehendible!
-=-=-=-=-=-
-MATERIALS-
-=-=-=-=-=-
Name Source
---- ------
Hexamethylenetetramine (Hexamin) Drug stores under the names
Hexamin, Urotropine, and
Methenamine
Strong Nitric Acid Chemical Supply House or
some Hardware stores
Acetone Drug Stores and Hardware
Stores
Scale with gram accuracy
Graduated Cylinder (cc or ml) or measuring cups
Thermometer 20-100 degrees celcius or 68-212
degrees farenheit
Several large quart canning jars
Two large basins or bowls made of metal or
some other heatable metal
Paper Towels
-=-=-=-=-=-
-PROCEDURE-
-=-=-=-=-=-
1) Place one half cup or 120 ml or cc of nitric acid in a large canning jar
and bring the temperature to between 20 and 30 degrees celcius (68-86 F)
by putting the jar in a basin of cold water.
2) Keep the thermometer in the jar so you can closely maintain the temperature
between your basins of hot and cold water.
3) Weigh out 70 grams by weight or 18 teaspoons by volume of hexamine. Then
start adding the hexamin slowly at 1/2 teaspoon at a time over a 15 minute
time period. All the while maintaining the temperature between 20 and 30
degrees celcius by moving it in and out of the cold water basins.
4) When all the hexamin is dissolved in the acid heat the solution to 55
degrees celcius (131 F) by placing the jar in a basin of hot water. Then
maintain this temperature for about ten minutes.
5) Now remove the jar from the basin of hot water and place it in the basin
of cold water and cool the jar to 20 degrees celcius (68 F). Now when the
solution reaches 20 degrees celcius add 3 cups (750ml) of cold water and
white salt will appear.
6) Now the white salt is RDX and should be handled with care. Now filter the
Acid/Water/RDX solution through a paper towel covering the mouth of another
jar.
7) Wash the RDX crystals off the paper towel and add an additional 3 cups of
fresh cold water and a teaspoon of sodium carbonate to neutralize the acid.
Now stir rapidly for 3 minutes and then filter it out again.
8) It is now usable, but I prefer purifying it by filling a quart canning jar
2/3 full of acetone and heating the acetone then adding the RDX crystals to
it a half teaspoon at a time until it completely dissolves in the acetone.
9) Now that it is all dissolved let the solution cool to room temperature and
let it stand for one hour. The RDX will then precipitate again into it's
salt. Then you must filter it through a paper towel around anothr jar and
rinse it with cold water the same way you did before. Now you have the
finished product roguhly 1 and 1/2 ounces of RDX.
10) Now store your finished product (after it dries) in a jar with a air tight
lid for future use. Seeing that RDX does not lose it's effectiveness for
months.
-=-=-=-
-USES!-
-=-=-=-
RDX is a very powerful explosive however it can be compressed into tubes
to make detonaters. Later in this newsletter I will prescribe a method for
making detonaters in which RDX will be used along with other explosives before
mentioned. RDX however is sensitive to friction, and can be used as an
explosive by itself. It is also commonly refered to as Clyclonite.
Later...
Jack The Ripper
_______________________________________________________________________________
| |
| |
| Anarchy Today |
| |
| Article #4 Issue #1 |
| |
| Mini-Compound Detonater's |
| |
| Brought to you by- |
| |
| Jack The Ripper |
| |
|_____________________________________________________________________________|
This is basically a tutorial in making detonaters, and there are a
few rules, that I would like each and every one of you to follow. Making
detonaters is very very dangerous considering that the purpose of detonaters
is for them to be sensitive and easily detonated, so be careful. Also the
detonaters I am telling you how to make are small, but the same principle can
be applied on a larger scale.
-=-=-=-=-=-
-MATERIALS-
-=-=-=-=-=-
Name Source
---- ------
Empty .22 Magnum shells or copper/brass/aluminum Gun stores or Hardware
tubing 1/4 inch in diameter and 1 inch long. These Stores
tubes must also be closed at one end.
A substantial quantity of Secondary Explosive i.e. RDX RDX Article 3 this
(amount depends on how many detonaters you intend to issue of "Anarchy
make) or PETN can be substituted here. Today" PETN is the
center filling of
detonating cords.
A substantial quantity of primary explosive i.e. Acetone Peroxide
Mercury Fulminate or Acetone Peroxide. Article 1 this issue
of "Anarchy Today"
An ignition charge of black powder. Gun stores FFF black
powder.
A loading press (commonly used for reloading shells Gun stores
also please be safe considering a few of these
detonaters may detonate when being compressed, so
take the neccessary precautions such as safty glasses
etc...)
-=-=-=-=-=-
-PROCEDURE-
-=-=-=-=-=-
*NOTE* dirt or oil may sensitive the detonaters to an unsafe level so when
handling the primary ad secondary and ingnition charges use tongs. Also boil
a bucket of water in the room as humidity helps or if your in a house turn
your shower on hot and leave it on!
1) Now light a candle, and let two drops of wax drip into each shell
casing before use. Then let the wax cool down.
2) Now fill the casing to a depth of 1/4 inch with RDX or PETN, and then
*GENTLY and SLOWLY* insert the ram and compress the explosive slowly
and evenly. Now remove the ram slowly and carefully.
3) Continue this process adding small amounts of RDX or PETN until a
column of secondary explosive 5/8 of an inch high has been pressed into
the 1 inch shell casing.
4) Now add a small amount of Primary explosive the same way you added the
secondary explosive on top of the secondary explosive. Now add the
Mercury Fulminate or Acetone Peroxide on top of the 5/8 inch column of
secondary explosive and compress it with the ram until it reaches a
height of primary explosive 1/4 inch high.
5) Now compress the remaining 1/8 of an inch with black powder. Now seal
the top with wax paper or tape until ready for use.
-=-=-=-=-
-DIAGRAM-
-=-=-=-=-
- +++ | |@@@@|
| |****|
| |****|
| |####|
1 INCH------< |####|
| |####|
| |####|
| |####|
| |----|
- |====|
+-++
+Key+
+-++
@ = Black Powder (Ignition Charge)
* = Mercury Fulminate or Acetone Peroxide (Primary Charge)
# = RDX or PETN (Secondary Charge)
- = Two drops of wax on Bottom
+ = Tape covering top
= = The bottom of shell casing
| = Sides of .22 Magnum Shell
-=-=-=-
-USES!-
-=-=-=-
These little beauties can be used for almost any purpose or a larger
version can be used where a hard to detonate substance is used. Their main
use is for minature hand grenades and other small explosives. The next issue
of "Anarchy Today" will cover various things such as explosive candles, etc...
Later...
Jack The Ripper
_______________________________________________________________________________
| |
| |
| Anarchy Today |
| |
| Article #5 Issue #1 |
| |
| Potassium Chlorate/Sugar Ignitor |
| |
| Brought to you by |
| |
| Jack The Ripper |
| |
|_____________________________________________________________________________|
This ignitor is one of my many favorites, it can be ignited by either
concentrated sulfuric or nitric acids. It also works excellently as a time
delay, which I will detail later.
-=-=-=-=-=-
-MATERIALS-
-=-=-=-=-=-
Name Source
---- ------
Potassium Chlorate Drug Stores and chemical supply
houses
Sugar (Granulated) Grocery Store
Measuring Container (Cup, Tablespoon, etc...)
Storage Container w/tight fitting lid
Mixing Container w/tight fitting lid
Two flat boards (one large 36x36 and the other
small so it can be held in the hand).
-=-=-=-=-=-
-PROCEDURE-
-=-=-=-=-=-
1) Spread handful at a time the potassium chlorate on the large board and
rub with the other flatboard or a rolling pin until the particles
resemble granulated sugar.
2) Now measure out 2 parts by volume of sugar into the container, and then
add 3 parts by volume of the Potassium Chlorate to the container. Now
recap the container and shake the mixture for 4-5 minutes until it has
a uniform color and consistency.
3) Store for future use in an air tight container, but remember to shake
it up before use to re-mix any settled particles.
-=-=-=-
-USES!-
-=-=-=-
Now for a delayed reaction place the acid in a gelatin capsule and
bury the gelatin capsule in the Potassium Chlorate mixture. Depending on how
many gelatin capsules you use and their size depends on the delay. It can
range from 20 minutes to and hour or more. This type of ignitor reaches a
temperature of 3,200 degrees farenheit and can ignite most incendiaries. It
can also be compacted into a pipe to create a low power pipe bomb.
Later...
Jack The Ripper
_______________________________________________________________________________
| |
| |
| Anarchy Today |
| |
| Artilce #6 Issue #1 |
| |
| Sulfur and Aluminum Igniter |
| |
| Brought to you by |
| |
| Jack The Ripper |
|_____________________________________________________________________________|
This is more of a secondary ignitor for those tough to ignite
incendiaries such as thermite etc... It is relatively easy to make and safe
to handle so therefore it is an excellent ignitor, and it does not lose it's
effectiveness quickly.
-=-=-=-=-=-
-MATERIALS-
-=-=-=-=-=-
Name Source
---- ------
Fine Aluminum Powder Paint Stores (Bronzing
Powder)
Sulfur Drug Stores
Measuring Container(Cup, tablespoon, etc...)
Mixing Container w/tight fitting lid
Storage Container w/tight fitting lid (airtight)
Two Flat Boards one hand size and the other 36x36
or a big board and a rolling pin
-=-=-=-=-=-
-PROCEDURE-
-=-=-=-=-=-
1) Spread the sulfur out on the board and crush into a fine powder (dust)
2) Measure out 4 parts by volume of finely powdered sulfur to 1 part by
volume of aluminum powder. Now mix these two in the mixing container
by closing the lid and shaking it up for 4-5 minutes until a uniform
color and consistancy are achieved.
3) Store the igniter in a waterproof container until ready for use. Also
re-shake before use to re-mix and settled particles.
-=-=-=-
-USES!-
-=-=-=-
This is mainly used to ignite thermite. Four spoonfuls of this
aluminum/sulfur igniter are added on top of the thermite, and one spoonful of
potassium chlorate/sugar igniter is added on top of that. Now when the
potassium Chlorate/sugar igniter is ignited it in turn ignites the
aluminum/sulfur igniter. This igniter reaches an incredible heat, and should
not be watched igniting without dark lensed protective eyewear, as it may
cause blindness.
_______________________________________________________________________________
| |
| |
| Anarchy Today |
| |
| Article #7 Issue #1 |
| |
| HTH/Brake Fluid Incendiary |
| |
| Brought to you by - |
| |
| Jack The Ripper |
| |
|_____________________________________________________________________________|
This is a very effective time delayed incendiary that anyone can make,
and get the materials too. It is simple and easy and inexpensive, so enjoy.
Also this incendiary bursts into flames when brake fluid comes in contact with
the Calcium Hypochlorite.
-=-=-=-=-=-
-MATERIALS-
-=-=-=-=-=-
Name Sources
---- -------
Granular Calcium Hypochlorite 70% HTH swimming Swimming pool supply
pool purifier house or bleaching
agent
Brake Fluid Auto Parts Store
or Gas Station
Two Cans of *EQUAL* size
Tape
Nail or Small Drill
-=-=-=-=-=-
-PROCEDURE-
-=-=-=-=-=-
1) Take your two cans and remove the contents, and then wash them out
thouroughly. Now drill or puncture a small hole in the bottom center
of one of the cans.
2) Now drill or puncture a series of small holes evenly spaced in the side
of the other can, and cover them with tape.
3) Now tape the top can (the can with one hole) on top of the other can
(the one with a lot of holes taped over)
4) Now place this set up in the center of a pile of Calcium Hypochlorite.
Now Depending on the delay time required remove the tape from over the
appropriate number of holes.
5) To start the delay just add brake fluid to the top can and let it start
to drip down.
-=-=-=-=-
-Diagram-
-=-=-=-=-
------------------<------Top Can
|________________|
|| ||
|| ||
|| ||
|| <---------Brake Fluid
|| ||
||_______O<-----------Drip Hole
------------------
+++ ++++++++++++++++++<-------Tape bonding cans
together
------------------
| |
| O |<------ O's are the delay holes
| |
|+++++++O++++++++|<------Taped over hole
| |
| O |
&&&&&&| |&&&&&&&&
&&&&&&&&&&|+++++++O++++++++|<------Taped over hole
&&&&&&&&&&&&&&------------------&&&&&&&&&&&&
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& <------ &'s is the Calcium
Hypochlorite
_______________________________________________________________________________
| |
| |
| Anarchy Today |
| |
| Article #8 Issue #1 |
| |
| Incendiary Timed Delay Moltov Cocktail |
| |
| Brought to you by |
| |
| Jack The Ripper |
| |
|_____________________________________________________________________________|
Please note that the detonating capsules used here will be refered to
most likely in a later issue, because they work excellently. Also this bomb
disperses flaming oil and gasoline quickly, so steer clear of it when it goes
off.
-=-=-=-=-=-
-MATERIALS-
-=-=-=-=-=-
Name Source
---- ------
Potassium/Chlorate Sugar igniter "Anarchy Today" Issue 1
Article 5
Concentrated Sulfuric Acid Clear battery acid
boiled until white
fumes appear
Gelatin Capsules (sizes 0,00, and 000) Drug Store and
Veterinary Clinics
Lead Shot Gun Stores or Shotgun
Shells
Narrow Neck Bottles (i.e. Wine bottles etc...) Liquor Store or Garbage
Oil
Gasoline
-=-=-=-=-=-
-PROCEDURE-
-=-=-=-=-=-
1) Empty out the contents of the gelatin capsules if any and separate
them. Now fill the smaller half of the capsule 1/4 full of lead shot.
Now fill the remaining space with the potassium chlorate/sugar igniter.
2) Now pack it down, and place the larger end cap on the packed
main capsule. Now set this aside for later use. Now repeat this
process until a number of capsules have been produced.
3) Store in a airtight container for future use.
-=-=-=-
-USES!-
-=-=-=-
1) Now your ready to make the incendiary device. Fill your wine bottle
about 1/4 inch high with Sulfuric Acid, and then fill the remaining
space 3/4 full of a gasoline/oil mixture in a 1:1 ratio or half gas
and half oil (same thing).
2) Now to detonate drop in three or four of the previously prepared
capsules, and turn the bottle upside down. (The neck of the bottle
downward)
3) What this does is the capsules with the lead shot in them sink to the
neck of the bottle where the heavier Sulfuric Acid is concentrated.
Now in about 20 minutes the acid will eat through the capsules and a
white hot flame will explode the bottle dispersing the gasoline and oil
mixture.
4) For a prolonged time delay place the capsule inside a larger capsule.
Later...
Jack The Ripper
_______________________________________________________________________________
| |
| |
| Anarchy Today |
| |
| Article #9 Issue #1 |
| |
| Miniature Claymore Mine |
| |
| Brought To You By |
| |
| Jack The Ripper |
| |
|_____________________________________________________________________________|
This is devasting and should be used in malls or other heavily
trafficked areas. It has a kill range of 50 yards (half a football feild),
and is one of the best I have seen, and it's fun to watch too!
-=-=-=-=-=-
-MATERIALS-
-=-=-=-=-=-
Name Source
---- ------
Potassium Chlorate Drug Stores and Chemical
Supply Houses
Nitrobenzene Drug Stores (Oil of Mirbane)
and Chemical Supply Houses
Measuring Container (Cup, Tablespoon, etc...)
Double-Sided Adhesive Tape
Small Alnico 5 Horseshoe Magnets
Epoxy Resin
A Lot of 1/4 Inch Ball Bearings
Soap dishes consisting of two separate halves
That fit together with the bottom half and the
top half bevelled
Flat board 36x36 and another flat board or
Rolling Pin
-=-=-=-=-=-
-PROCEDURE-
-=-=-=-=-=-
1) First off crush the Potassium Chlorate between the two boards or with
the rolling pin until it is a very very very fine powder.
2) Fill the top half of the soap dish to a depth of 3/4 inch with 1/4 inch
diameter ball bearings held together with a light coating of epoxy
resin.
3) Now cut a hole in the bottom half and cover it with tape. The hole
should be big enough for you to pour the nitrobenzene into later and
big enough to fit a detonater into.
4) Now pack the bottom half tightly with Potassium Chlorate, very tightly
leaving no extra room.
5) Now tape the two halves together tightly, and your pretty much done.
-=-=-=-
-USES!-
-=-=-=-
1) When your ready to use your charge simply pour in the nitrobenzene.
The correct ratio is 1 part by volume of nitrobenzene to 4 parts
by volume of potassium chlorate. Now if you didn't read this through
and keep track of the amount of potassium chlorate you used, then you
fucked up and won't get optimum results.
2) Now allow the nitrobenzene to soak in for 4-6 minutes, and then insert
your electronically initiated or time fused detonater into the hole.
Now seal around the hole with epoxy resin
3) Now use the magnets and the tape to attach the charge 3 feet above the
ground with the ball bearing side facing outward.
4) Now you can either use an egg timer or a stepswitch (Underground
detonater activated by weight) or you can use the good old time fuse
running into a mini-compound detonater.
Later...
Jack The Ripper
_______________________________________________________________________________
| |
| |
| Anarchy Today |
| |
| Article #10 Issue #1 |
| |
| Shotgun Shell Impact Grenade |
| |
| Brought To You By- |
| |
| Jack The Ripper |
| |
|_____________________________________________________________________________|
This is an excellent little toy, ad can save your life. It not only
disperses crowds, but also legs, arms, feet, etc...
-=-=-=-=-=-
-MATERIALS-
-=-=-=-=-=-
Name Source
---- ------
Potassium Chlorate/Nitrobenzene Article #9 Issue #1
Mini-Compound Detonater Artilce #4 Issue #1
12 Gauge Shotgun Shell Gunstore
Wood Dowel or Steel Bar 11/16' in Diameter Hardware Stores
and any length beyon 1/2'
Hacksaw
Drill with 1/4' bit
Pieces of Cloth 12' x 1/2'
Epoxy Resin
Electrical Tape
Steel Ball Bearing 3/8' in Diameter
-=-=-=-=-=-
-PROCEDURE-
-=-=-=-=-=-
1) Cut open or open up the front end of a 12 gauge shotgun shell, and
empty out the entire contents saving only the casing.
2) To ensure the mini detonater is centered use the hacksaw to cut a 1/2'
length of 11/16' steel bar or wooden dowel. Now drill a 1/4' diameter
hole in the center of the 1/2' long wood or metal cylinder.
3) After the guide has been prepared then glue it in place on the primer
inside the shotgun shell casing. *NOTE* do not get any glue on the
primer itself. Now place the minicompound detonater open side down in
the cylinder and glue it into place. Now fill the remaining space in
the shotshell with Potassium Chlorate ***CAREFULLY***. Now close off
the end with tape, and when ready to use simply pour in the
nitrobenzen activator.
4) After this is accomplished tape a 3/8' steel ball bearing over the
primer on the outside of the shell over the primer. Now tape the
cloth streamers around the upside of the shell casing to ensure
stability in flight and also helping it to land on the downside or
primer side.
5) Now tape nails around the shell with notches filed 1/4' apart all
along them.
-=-=-=-=-
-DIAGRAM-
-=-=-=-=-
\ / \ | / \
\/ \|/ /
|\ /\| |
\ \ / // /
\ \/ // /
\ \\||/
-------
|%%%%%%%|
|%%%%%%%|
|%%%%%%%|
|%%%%%%%|
|%%+++%%|
|%%+++%%|
|%%+++%%|
|%%+++%%|
|&&+++&&|
|&&+++&&|
---"---
\ O /
=====
+-+-+
+KEY+
+-+-+
+ = Mini Compound Detonater
& = Wood or Metal Holding Cylinder for Mini-Compound Detonater
= = Tape
O = Ball Bearing
% = Potassium Chlorate/Nitrobenzene High Explosive
\ |\/ = Cloth Streamers
" = Primer
-=-=-=-
-USES!-
-=-=-=-
1) Pour the nitrobenzene into the upside of the shell and then wait 3-4
minutes. Then to use simply throw at a target or group of people and
upon impact the grenade will detonate itself.
2) To use as a booby trap simply place it with the ball bearing side up
in the ground where someone will step on it. Minus the cloth streamers
or simply make the shell look the way it was before, and some poor
shithead will eventually fire it resulting in death. Seeing that the
barrel will most likely blow him apart.
Later...
Jack The Ripper
Well this about sums it up for my first issue of "Anarchy Today". I
would like your feedback and responses on this first issue. Also I would
like to take the time to thank the C.I.A. for making much of this information
available to me. Also I would like to thank Lord Blix for being such a good
guy and NOSE for being there for me during those grueling nights when I was
writing this newsletter. Also I am accepting articles for the next issue,
and the Newslettr will not be exclusively dedicated to anarchy, but it will
retain it's name. So be looking for it! Also submit all artices to......
Call London at Midnight Home of Anarchy Today and OC...........713-523-3733
Thank you for your support and help, and please submit articles and help
us grow into a booming magazine.
Later...
Jack The Ripper
The Anarchist's Underground [713] 890-0561
[G-Files]:[1]:[All Uploads]:[?/Help]: &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
