home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Collection of Hack-Phreak Scene Programs
/
cleanhpvac.zip
/
cleanhpvac
/
VORTEX.ZIP
/
005.TXT
< prev
next >
Wrap
Text File
|
1995-11-06
|
1KB
|
28 lines
- How to make a smoke bomb with bottle caps -
Take the bottle cap off of a two liter soda bottle. Then cut
the heads off STRIKE ANYWHERE matches. Take them and pack them in real
tight in the cap so that they come a little above the edge. Diagram:
matches = # #####
cap = * #######
*********
* *
*********
Then you place a beer bottle cap on top of them so that one
end of it touches the two-liter cap. One side should have a gap
bettween the caps about two to three milimeters high. Then take tape
and secure the caps together real tight leaving a little space
in bettween the tape on the raised side of the caps about 2mm x 2mm.
DO NOT PUT TO MUCH TAPE ON!!!!!! You have to put just the right
amount. If you put to much on it wil absorb the shock of you throwing
it and therefor not go off. If you do not put enough the pressure the
matches make as they burn will pop in in half. Once you have followed
these simple but confusing instructions, Throw it real hard against a
real hard surface.
--------Vortex