home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Collection of Hack-Phreak Scene Programs
/
cleanhpvac.zip
/
cleanhpvac
/
TRIPWIRE.ZIP
/
TRIPWIRE.TXT
< prev
Wrap
Text File
|
1997-02-03
|
6KB
|
89 lines
______ _ _ _____ _ ______ ___ _____ ____ _ _
\ / \ / \ | _ | | __ |____\ / __ | | | |
=====| | |\/| | | |_| | | | | |_____| | | | | |\ | |=====
======| | | | | |_____| | |__| |____|| | |__| | | \ | |======
=====| | | | | | | |______|____|| | | | \| |=====
/___\_| |_|_| -RK |________|____/___\_____|_| |_|
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
::::::::::::::::::::::::::: ELECTRONIC TRIPWIRE/ALARM ::::::::::::::::::::::::::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:::::::::::::::::::::: WRITTEN BY ROAD KILL FOR IMPLOSiON ::::::::::::::::::::::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
________________________________________________________________________________
This is one of those disclaimer thingies which everyone puts in. Basically the
file your about to read is for informational purposes only, and you should not
under any circumstances whatsoever even contemplate doing anything which is on
this file. If you ignore this, and do enact what is described in this file, i
cannot be held responsible in anyway.
If you come to me with complaints of any sort, relating to this file, i hold the
right to put spam in your fish tank, and come onto your sister.
________________________________________________________________________________
The idea for this came one day, when i was sitting in an electronics class,
and we were supposed to be making some alarm thingy, which would be set of by
crossing through a light beam. It hit me, that this item had a much better
potential as a handy device in the home militants arsenal of improvised
munitions. It offered several things that physical tripwires are limited by.
What the device does is, it stays dormant until it is deprived of light
(by someone crossing the light path) When it doesn't get light, it crosses over
into a secondary circuit, which has an alarm or in our case explosives attached.
So there you go, school isn't a total waste of time is it, and the better thing
about this was, we were being given all the parts i needed to make it...;) which
lets face it is a hell of a lot better than paying for them, and much easier
than acquiring them through illegitemate means.
The device has many uses. I've called it a tripwire, because thats what i
thought it would be best as at first. But it can also be used as an alarm, or a
cross between, where when the alarm goes off, so does the explosives....that
would be quite alarming (bad pun) Ther good part about it is, its simple and
easy, and relatively cheap. I'm going to provide two systems, the only
differance will be the addition of a relay, which ups the cost by about $5.
╔═════════════════════════════╤═══════════════════════════════════════════╗
║ Type │ Item ║
╟─────────────────────────────┼───────────────────────────────────────────╢
║ Resistor 1 │ 4.7k ohm ║
║ Resistor 2 │ 4.7k ohm ║
║ Resistor 3 │ 120 ohm ║
║ Resistor 4 │ Light Dependant Resistor ║
║ Diode │ IN 4007 ║
║ Transistor 1&2 │ BC548 ║
║ Trimpot/potentometer │ 5Kohm ║
║ Battery clip (optional) │ ║
║ Relay (optional) │ 9V Relay ║
║ │ ║
╚═════════════════════════════╧═══════════════════════════════════════════╝
The parts can all be bought at most electronics stores. Avoid Dick Smith and
Tandy, coz there just too commercial. I recommend Jay Car Electronics. All up
the parts should only cost a couple of dollars, but the relay will be about $5,
but it does make the circuit much better.
I'm no good at scematics, so i've done you a VGA of the wiring diagram, so just
copy that. For the cheaper style, just leave of the resistor, and have you
explosive charge hoocked up to those two wires. (note- i havn't tried it
without a relay, so i can't guarantee that it will work, however in theory it
should, but it won't be as stable)
The hardest part about this circuit will be the light source, people are going
to see a torch beam focused on the system, i recommend, a bright Red LED, you
can adjust the sensitivity of the system, by turning the trimpot. Another
variation on the circuit would be to switch the LDR (light dependant resistor),
with a LRR (light resistant resistor) so that as soon as light gets on the
circuit, it is activated. Good for destroying a room, when someone enters and
turns on a light.
Thats really about it from me, you should be able to build it simply, off the
diagram, if you have any problems contact me at Neural Hijack.
--------------------------------------------------------------------------------
Written without conscious by Road Kill for IMPLOSiON at 2:15 am. Who needs
sleep when you have jolt.