Collection of Hack-Phreak Scene Programs/cleanhpvac.zip/cleanhpvac/SECDR13A.ZIP/SECDRV.DOC

Text File | 1994-01-30 | 31KB | 592 lines

SecureDrive V1.3A Documentation                                             |
Edgar Swank <[e-mail]>                                      |

This is a maintenance release of SecureDrive 1.3.  It mainly fixes
reported problems and has minimal new function.  See file BUGS13.DOC.
The only visible functional change from 1.3 is the appearance of
msg

   Check bytes in Disk x: Boot Sector need updating from 1.3 to
   1.1/1.3A. Proceed?

which will be issued by both LOGIN and CRYPTDSK when they attempt to
verify a passphrase on a hard disk or diskette encrypted by version
1.3 CRYPTDSK operating in version 1.1 compatability mode.  This
corrects the error in computing the check bytes used to verify the
passphrase and updates the check bytes to the correct 1.1 value and
WRITES back the boot sector. Note that once this update has taken
place, this disk cannot be decrypted by release 1.3 anymore.

Releases 1.3 and 1.3A of Secure Drive are based on releases 1.0 and
1.1, mostly written by

  Mike Ingle <[e-mail]>

and version 1.2, with significant new code by myself.

The code which we wrote is not copyrighted, but the program contains GNU
Copylefted code, and therefore may be freely distributed under the terms of
the GNU General Public Licence. See file COPYING for legalese.

SecureDrive V1.1 Changes from V1.0

* Two-drives bug fixed. V1.0 would get the drives out of order if you had
  two physical hard drives. V1.1 fixes this problem.

* One-step passphrase change. Instead of decrypting and re-encrypting, you
  can change the passphrase in one step with CRYPTDSK.

* Improved hashing algorithm. V1.0 used a simple MD5 of the passphrase to
  produce the encryption key. This allowed an attacker to test possible
  passphrases quickly. V1.1 iterates the hash 2048 times to slow down a
  passphrase search.

    Because of the new passphrase hashing algorithm, V1.1 users will
    need to decrypt your disk with V1.0 and re-encrypt with V1.1 to
    upgrade.  The new algorithm produces a different IDEA key for the
    same passphrase.

    This may have been unclear in the previous version:  V1.0 and V1.1
    encrypt one hard drive partition at a time.  LOGIN /S will not
    protect more than one partition.  If you log in to a second
    partition, the first one will not be accessible, and will not be
    protected from writes.

All references to MD5 refer to:
RSA Data Security, Inc. MD5 Message-Digest Algorithm
(C) 1990, RSA Data Security

The IDEA(tm) block cipher is covered by a patent held by ETH and a Swiss
company called Ascom-Tech AG.  The Swiss patent number is PCT/CH91/00117.
International patents are pending. IDEA(tm) is a trademark of Ascom-Tech AG.
There is no license fee required for noncommercial use. Commercial users
may obtain licensing details from:

    Dieter Profos, Ascom Tech AG, Solothurn Lab, Postfach 151, 4502
    Solothurn, Switzerland, Tel [phone], Fax [phone].

Ascom IDEA patents:

US patent 5,214,703 granted May 25, 1993.
EP Patent EP 0 482 154 B1 granted June 30, 1993.
JP Patent pending

Use this software at your own risk!

Send all comments and bug reports to <[e-mail]>.            |

Changes for version 1.2 are highlighted by "|" at the right margin.         |
Changes for version 1.3 are highlighted by "+" at the right margin.         +

Many people have sensitive or confidential data on their personal computers.
Controlling access to this data can be a problem. PC's, and laptops in
particular, are highly vulnerable to theft or unauthorized use. Encryption
is the most secure means of protection, but is often cumbersome to use. The
user must decrypt a file, work with it, encrypt it, and then wipe the
plaintext. If encryption were easy, many more people would use it.
SecureDrive is a step in this direction. SecureDrive automatically stores
sensitive data on your DOS/Windows system in encrypted form.

SecureDrive V1.3 allows you to create up to four encrypted partitions       +
on your hard drive(s).  It also allows you to encrypt floppy disks.
Encrypted partitions and disks become fully accessible when the TSR is
loaded and the proper passphrase entered.  The TSR takes only 2.4K of       +
RAM, and can be loaded high.  Encryption is performed at the sector
level and is completely transparent to the application program.
Everything on the disk or partitions except the boot sector is
encrypted.  Encrypted floppy disks can be freely interchanged with
unencrypted ones.  Disks and partitions can be decrypted and returned
to normal at any time.

SecureDrive uses the IDEA cipher in CFB mode for maximum data
security.  The MD5 hash function is used to convert the user's
passphrase into a 128-bit IDEA key.  The disk serial number, and track
and sector numbers are used as part of the initialization to make each
sector unique.

SecureDrive is made up of three program files.  SECTSR is the
memory-resident driver.  CRYPTDSK is used to encrypt and decrypt
floppy disks and hard drive partitions.  LOGIN is used to unlock
encrypted disks and partitions by loading the passphrase and disk
parameters into the resident module.

Getting started instructions:

If you only have one hard drive partition (C:), you will have to
repartition your hard drive if you want an encrypted partition.  You
can use encrypted floppies without changing your hard drive.  You
should create a partition(s) large enough to hold all of your
sensitive data.  For this example, assume the partition is (D:).  Put
SECTSR, CRYPTDSK, and LOGIN in a directory which is in your PATH.
(Not on the soon-to-be encrypted drive, of course!)

Normally re-partitioning a hard drive with FDISK destroys all the data
on it, so you would have to back up all your data beforehand.  But if
you only have one partition now, there is a utility

FIPS08.ZIP    84831  07-23-93  Nondestructive hard disk
                               partition split util.

available from the SIMTEL archive and possibly elsewhere that claims
to be able to split your first partition without data loss.

Put in your AUTOEXEC.BAT, before the loading of any disk cache:

  SECTSR
  LOGIN D: /S (assuming drive D:)
  LOGIN E: /S (and so on for each to-be-encrypted partition, up to four)    +

This will load the TSR and put encrypted disk partitions in "safe mode",    +
preventing accidental access and damage to the partitions after they are
encrypted.  Reboot the system to make the changes take effect.

Actually, before the partitions are encrypted with CRYPTDSK, LOGIN /S       +
will return a warning message that the partitions are not encrypted,        +
but, as of version 1.3, CRYPTDSK uses SECTSR to protect the drive           +
while it is being encrypted and until the next boot. This is a change       +
from previous versions. V1.0 to V1.2 would not operate on hard disk         +
partitions while SECTSR was in memory.                                      +

One purpose of having multiple encrypted hard disk partitions is so         +
that up to four users (perhaps members of a family) can each have           +
their own encrypted partition with its own unique passphrase. This          +
allows up to four users to have privacy from each other, even if they all   +
use the same PC and physical hard disk(s).                                  +

The partition can have data on it, or it can be empty.  Run CRYPTDSK
and select the drive letter.  Enter a passphrase.  CRYPTDSK will now
encrypt the partition.  It will skip bad sectors.

Repeat this for each hard disk partition.  If different users are           +
assigned to different partitions, let each of them run CRYPTDSK and         +
enter his own unique passphrase.                                            +

Now type

  LOGIN D: (again, assuming drive D:)

and enter your passphrase. Your encrypted drive is now accessible.

To use an encrypted floppy, use CRYPTDSK to encrypt the floppy. Then run

  LOGIN /F

and enter the passphrase. The encrypted floppy is now accessible. If you
entered the wrong passphrase, access will fail with a drive not ready error.

As of V1.3, LOGIN will ask you to verify your floppy disk passphrase        +
by inserting an encrypted floppy disk into either the A:  or B:             +
drive.  You are given the option to bypass the verification.                +

All versions of LOGIN always verify passphrases for hard disk
partitions.

As of Version 1.2, you may use an operand /PGP with LOGIN, either           |
by itself, or with either operand above. By itself,                         |

  LOGIN /PGP                                                                |

will prompt for a passphrase and set the PGPPASS environment variable       |
with whatever is entered.  As of version 1.3, you can use this form to      +
erase PGPPASS by just pressing Enter (entering a null passphrase) at        +
the prompt.  This accomplishes the same thing as                            +

 LOGIN /C /PGP                                                              +

described below, but -without- clearing the SecureDrive keyS in             +
SECTSR. Also, LOGIN /PGP can be run without SECTSR in memory,               +
so it's a good way to set PGPPASS (no echo) even when you're not            +
useing encrypted disks.                                                     +

If PGPPASS is already set then

  LOGIN D: /PGP                                                             |

or                                                                          |

  LOGIN /F /PGP                                                             |

will use whatever PGPPASS is set to as the passphrase.  For the hard        |
disk partition (and optionally for floppies), LOGIN will test the           +
PGPPASS passphrase.  If it is incorrect, then it will prompt you for        |
another passphrase.                                                         |


If PGPPASS is NOT set when these forms of LOGIN are used, than a passphrase |
is prompted for AND PGPPASS is set to this passphrase.                      |

The purpose of these changes is to allow you to enter a single passphrase   |
only once per boot IF you choose to use the same passphrase for your PGP    |
secret key, your SecureDrive encrypted hard disk partition, and SecureDrive |
encrypted floppies.                                                         |

Compatability with Previous Versions:                                       +

As you read above, due to use of a more complex hashing algorithm,          +
passphrases entered in Version 1.1 are not compatible with those            +
entered in version 1.0 (and 1.2) and vice versa, because the same           +
passphrases will produce different 128-bit IDEA keys.  Mike Ingle made      +
this change to slow down brute force "dictionary" attacks.                  +

As you read above, to switch to Version 1.1 from 1.0, you have to           +
decrypt your hard disk partition and all your encrypted floppies            +
(maybe hundreds of them!)  with CRYPTDSK 1.0 and then re-encrypt with       +
CRYPTDSK 1.1.  Also, with Version 1.1, there is a very noticeable           +
delay (1 or 2 seconds on my normally quick 386/SX 16) to enter and/or       +
verify a passphrase.                                                        +

I (Edgar Swank) respectfully disagree with Mike on the value of this        +
"feature."  In my opinion (you may disagree) if you have a good             +
passphrase, this change is not necessary; and it is insufficient to         +
protect a poor passphrase.  The security "exposure" of version 1.0          +
(and 1.2) relative to 1.1 can be more than made up for by adding one        +
word (randomly selected from a list of 5000) or two (random upper or        +
lower case) alpha characters to your passphrase.  I think there is a        +
greater security exposure from all the plaintext data laying around         +
during conversion.                                                          +

In version 1.3, I have given you a choice, to convert to 1.1                +
passphrases, or to stay with 1.0-compatible ones.  You make your            +
selection through an environment variable:                                  +

  SET SD10CMP=Y | X                                                         +

where "|" denotes a selection of either Y or X.                             +

"Y" (Yes) means that CRYPTDSK will always encrypt with Version 1.0,         +
but that CRYPTDSK and LOGIN will decrypt disks encrypted with any           +
version.  Note that for this double-compatibility feature to work with      +
diskettes, you have to let LOGIN /F verify the passphrase with the          +
encrypted diskette you want to access.

"X" (exclusive) means that CRYPTDSK and LOGIN will ALWAYS encrypt and       +
decrypt with version 1.0-compatible passphrases. You will generally         +
not be able to access any disks encrypted with Version 1.1 (or Version      +
1.3 with compatibility mode off).                                           +

The reason I provided eXclusive mode is so that if you know you will        +
be dealing only with version 1.0-compatible disks, you can avoid the        +
delay of checking for 1.1-compatible disks when you inadvertantly           +
enter an incorrect passphrase.                                              +

If SD10CMP is set to anything else, or not set at all, then CRYPTDSK        +
will always encrypt in 1.1-compatible mode. LOGIN and CRYPTDSK will         +
decrypt disks encrypted in either mode.  (It takes an insignificant         +
amount of additional time to check for a 1.0 passphrase).                   +

Keys taken from SECTSR which are verified by decryption could have          +
been generated in either 1.0 or 1.1-compatible mode.  The keys              +
internal to SECTSR have already been digested from the passphrase.          +
These can be used by LOGIN and CRYPTDSK to encrypt and decrypt, but         +
the original passphrase itself cannot be recovered and an internal key      +
cannot be converted from one compatibility to another.  A flag is kept      +
in SECTSR indicating which mode was used to convert the passphrase to       +
the key, though, and CRYPTDSK will not allow internal keys to be used       +
to encrypt in the wrong mode.                                               +

In version 1.3, the "(C)hange passphrase" feature can be used to            +
convert disks encrypted in one compatibility to disks encrypted in the      +
other (as specified by SD10CMP). You can even convert from one              +
compatibility to the other and retain the same passphrase (but              +
different keys).  Note that you can't convert compatibiities if             +

  SD10CMP=X                                                                 +

because this will prevent CRYPTDSK from decrypting (first half of           +
converting) 1.1-compatible disks.                                           +

Also, CRYPTDSK 1.3 will check for and not allow a wasted pass of            +
decrypting and re-encrypting to the same -key- (both passphrase and         +
compatibility mode the same).                                               +

Version 1.3 has added a lot of user messages to keep you informed of        +
which compatibility is being used, where passphrases are coming from,       +
etc.                                                                        +

Detailed instructions:

Creating an encrypted floppy disk:

Insert any DOS-formatted floppy disk. The disk may contain data, or it may
be empty. Run CRYPTDSK. Select the floppy drive, and enter a passphrase. You
will be required to enter the passphrase twice to confirm. CRYPTDSK will now
encrypt the disk.

As of version 1.2, if PGPPASS is set before you run CRYPTDSK, CRYPTDSK will |
ask to use the value of PGPPASS for the passphrase before prompting you.    |
Obviously, if you encrypt a lot of diskettes at once, this feature can save |
you a lot of typing.                                                        |

As of version 1.3, if CRYPTDSK is run with SECTSR resident, you may         +
be asked if you want to use the hard disk or floppy passwords               +
previously entered and currently in use to encrypt another floppy.          +

Accessing an encrypted floppy disk:

Load SECTSR, if it's not already loaded. Run LOGIN /F and enter the
passphrase used to encrypt the disk. The disk is now accessible. You can
swap disks at any time, as long as all of the disks are encrypted with the
same passphrase. You can also access unencrypted disks; SECTSR switches on
and off automatically. If you want to access a disk encrypted with a
different passphrase, type LOGIN /F again and enter the new passphrase. The
same passphrase applies to both floppy drives.

As of version 1.3, LOGIN /F will try (if you let it read an encrypted       +
diskette) the currently active hard disk passphrase (if one exists).        +
If you bypass the verification step, then you are asked if you want to      +
use the hard disk passphrase without verification.                          +

Decrypting a floppy disk:

Run CRYPTDSK. Select the floppy drive. CRYPTDSK will detect that the disk is
encrypted, and will prompt you to decrypt it. Enter your passphrase.
CRYPTDSK will now decrypt the disk.

As of version 1.2, if PGPPASS is set before you run CRYPTDSK, CRYPTDSK will |
try the value of PGPPASS for the passphrase before prompting you.           |

As of version 1.3, CRYPTDSK will also try the active hard disk and          +
floppy passphrases in SECTSR before prompting you.                          +

Creating an encrypted hard drive partition:

You must have more than one partition, or more than one hard drive. If you
encrypt your C: drive, you will not be able to boot from it! If this
happens, decrypt it again to restore it. You should create a small D:
partition, large enough to store as much sensitive information as you plan
to keep on your hard drive. You can also run applications from the secure
partition, but there will be some speed loss. Back up your hard drive before
installing. Use FDISK to repartition your drive, and set up a small D:
drive, which will become your secure partition. You can copy data to it
before or after encryption. Run CRYPTDSK and select the letter of the
partition you want to encrypt. CRYPTDSK will display the physical drive,
head, and cylinder of the boot sector of this partition. You should verify
these numbers. Then enter a passphrase to encrypt the partition. This will
take a few minutes, depending on the size of the partition and your CPU.

As of version 1.2, if PGPPASS is set before you run CRYPTDSK, CRYPTDSK will |
ask to use the value of PGPPASS for the passphrase before prompting you.    |

Preventing damage to the secure partition, which could be caused by writing
to it withot first logging in:

Load SECTSR. Run LOGIN D: /S to put the drive in safe mode. This should be
done in AUTOEXEC.BAT. Writes will be locked out. A drive not ready error
will occur if you attempt to access the encrypted drive. This will prevent
DOS programs from reading the drive. Windows behaves rather pathologically:
it retries the attempt about a dozen times, and then displays garbage. If
this happens, just close the window, log in, and try again. The drive is
still protected against writes in Windows.

As of version 1.3, you should add LOGIN D:  /S statement(s) to              +
AUTOEXEC.BAT and load SECTSR before encrypting your hard disk               +
partition(s).  CRYPTDSK will set the partition to Safe mode before          +
beginning to encrypt.  (CRYPTDSK itself bypasses SECTSR).                   +

Accessing an encrypted hard drive partition:

Load SECTSR, if it's not already loaded.  Run LOGIN D:  where D is
replaced by the letter of the encrypted partition.  Type the
passphrase.  Your secure partition is now accessible.  Note that only
one secure partition can be accessible at a time.  You can have
encrypted floppies and a secure partition active simultaneously, but
you can't have two secure partitions active at the same time.  The TSR      +
only stores two cryptographic keys:  one for a secure partition, and
one for encrypted floppies.

Although V1.3 still only allows you to have one secure partition            +
active, up to four may be placed in Safe mode. Each partition may be        +
encrypted with a different passphrase, allowing up to four different        +
users (or groups) to keep data private from each other.                     +

Decrypting a hard drive partition:

As of version 1.3, it is no longer necessary or desireable to reboot        +
to clear SECTSR out of memory. Run CRYPTDSK, select the drive letter,
and enter the passphrase. CRYPTDSK will decrypt your partition.

As of version 1.2, if PGPPASS is set before you run CRYPTDSK, CRYPTDSK will |
try the value of PGPPASS for the passphrase before prompting you.           |

Changing a passphrase:

Versions 1.1 and 1.3 allow you to do this in one step.  Select the          +
drive with CRYPTDSK and it will prompt you to change the passphrase.
Enter the old and new passphrases as prompted.  Decrypt the disk with
the old passphrase, and re-encrypt it with the new passphrase.

This is more secure than doing decryption and encryption separately.
Decryption and re-encryption is done a track at a time. The
intermediate plaintext exists only in memory, never on the disk.

Version 1.3 includes the additional testing for PGPPASS and SECTSR          +
internal passphrases for decryption and the additional prompting for        +
new passphrases discussed above.                                            +

Clearing keys:

Typing LOGIN /C will erase the cryptographic keys from memory and disable
encryption. You may then run LOGIN again to restore access. Note that this
does not erase plaintext from memory; turn the computer off to do this.

As of Version 1.2, typing LOGIN /C /PGP will clear the SecureDrive crypto   |
keys from memory AND clear the PGPPASS environment variable. This is done   |
in a manner less likely to leave your passphrase in memory than just using  |
the DOS SET command.  In addition, Version 1.2 clears all the free memory   |
it can find, which is likely to include some plaintext.  However, if you    |
want to be absolutely sure all traces of sensitive data are erased from     |
memory then turning off the computer is still recommended.                  |

Using a disk cache:

You can use a disk cache such as SMARTDRV.EXE or NCACHE to speed up access.
The cache must be loaded after SECTSR is loaded. A .SYS cache will not work,
because it is loaded before the TSR. If the cache is loaded first, it will
cache ciphertext and provide little speedup. If the cache is loaded after
SECTSR, it will cache plaintext and speed up access.

Hazards to avoid:

Writing to the encrypted partition or encrypted floppies without logging in.
When you load the TSR and put it in safe mode, writes will be locked out.
However, if you access an encrypted disk without loading the TSR, the disk
can be destroyed. This happened to one of the beta testers. Use safe mode
and load the TSR in AUTOEXEC to prevent it.

Forgetting your passphrase. With any lock, there is the hazard of losing the
key. But cryptography is a special case because there are no locksmiths to
save you. If you forget a passphrase, you're out of luck. That data is gone.

Using this program without backups.  It accesses disks at the low level of
the BIOS, and a program bug or an unfriendly interaction between the TSR
and an application could scramble your hard drive permanently.

Exporting this program.  Cryptography is export controlled, and             |
sending this program outside the country may be illegal.  Don't do it.

The "author" of versions 1.2 and 1.3, Edgar Swank, says that the            +
export ban should not prevent you from placing this program on public       |
BBS's and anonymous FTP sites in the US and Canada.  If individuals         |
outside the US/Canada use the internet or international long distance       |
to obtain copies of the program, THEY may be breaking US law.               |

Any such foreign individuals should be aware that US law enforcement may    |
legally (under US law) apprehend individuals who break US laws even if such |
individuals are not on or even have never been on US soil.  Such            |
apprehension may remove such individuals directly to US jurisdiction        |
without benefit of extradition proceedings in such individuals' home        |
country(ies).  This has actually happened in at least two cases, Mexico --  |
suspect in murder of US drug agent, Panama -- Noriega -- indicted in        |
absencia for drug smuggling.  As is well known, after a small war with      |
Panama, Noriega was brought to the USA, tried and convicted.  He is now a   |
guest of the US Government in a Florida prison.                             |

Potential security problems:

Data leaks: swapfiles and temporary files. Many application programs create
swapfiles and temporary files all the time. If these files are written to a
non-encrypted disk, they will expose your data. This can be avoided by
putting the swapfiles and temporary files on the encrypted disk, but this is
slow. The best solution is to use a RAM disk or cache the encrypted disk.
There are also programs such as Norton WIPEINFO which will wipe empty space.

Trojans and viruses: someone could replace LOGIN with a hacked version, or
install a specially written Trojan on your system, and capture your
passphrase or key. Since the key remains in memory in the TSR, any program
could potentially swipe it. The only sure way to prevent this is to make
sure that nobody has the opportunity to install such a Trojan.

If you have PGP, you can verify that version 1.3A executable modules        +

  CRYPTDSK.EXE                                                              |
  LOGIN.EXE                                                                 |
  SECTSR.COM                                                                |

have not been modified since I compiled them by checking them against       |
the detached signatures included. First add my (Edgar Swank's) public key   |
to your public keyring

  PGP -ka KEY.ASC                                                           |

Then issue commands                                                         |

  PGP CRYPTDSK.SIG  CRYPTDSK.EXE                                            |
  PGP LOGIN.SIG     LOGIN.EXE                                               |
  PGP SECTSR.SIG    SECTSR.COM                                              |

The integrity of this check depends upon that my public key is genuine. You |
should satisfy yourself from the signatures on the key. Also my public key  |
is available independently on various public keyservers.                    |

Passphrase guessing: if your passphrase is weak (a single word, monocase,
with no punctuation is very weak) an attacker could try to guess it. This
has proven highly effective against Unix login passwords. The best
passphrase is a phrase which does not appear in text or literature.

How many passphrases?: The additions to version 1.2 make it easier to use a |
single passphrase both for your PGP secret key and for SecureDrive hard and |
floppy disks. If you do this, it's obviously putting all your eggs in one   |
basket. One school of thought says its better to use several baskets, so if |
one breaks you only loose some of your eggs.  The other school says it may  |
be better to use one basket IF you make it the best damn basket you can and |
put your best efforts into protecting it.                                   |

So if you use a single passphrase for everything, make it the best          |
passphrase you can think of and REMEMBER without writing it down ANYWHERE.  |
A good passphrase should be at least four or five words.  The easiest to    |
remember and hardest to guess will be "outrageous" and use words that       |
normally don't go together, e.g.  "red grass over yellow sky" (don't use    |
this example).  Some use of profanity, foreign words, and creative spelling |
and punctuation, as long as you can remember it all, will also make the     |
passphrase harder to guess.                                                 |

Backups: must be encrypted. Use encrypted disks, or use an encrypting
compression program such as HPACK and write the encrypted file onto the
backup tape. Do not leave unencrypted disks or printouts lying around.

An alternative to HPACK is a combination of any compression program (e.g.
PKZIP) and PGP. But DON'T rely on the "built-in" encryption of any
compression program other than HPACK.

Source code and modifications:

SECTSR.ASM is the self-contained source for SECTSR. Use TASM and TLINK /T to
assemble it.

CRYPTDSK uses SDCOMMON and CRYPT2.OBJ generated from CRYPT2.ASM. It also
uses MD5.C, which is from the PGP23A source code.

LOGIN uses SDCOMMON and MD5.C.

In version 1.2, LOGIN also uses SETENV.OBJ generated from SETENV.ASM. This  |
code is used to set/clear the PGPPASS environment variable. This code sets  |
the enviornment variable in all copies of the environment it can find, so   |
it may work in some situations where the DOS SET command does not. On the   |
other hand, in some early versions of DOS, it may not find the master       |
environment area. Experiment for yourself.                                  |

Version 1.3 adds the RLDBIOS.ASM module which replaces the C++ library      +
subroutine BIOSDISK and allows LOGIN and CRYPTDSK to access the "real"      +
BIOS without going through SECTSR.                                          +

The programs were compiled with Turbo C++. Compile them large model.

In versions 1.2 and 1.3A a MAKEFILE is provided.                            +

If you make any interesting modifications or improvements, send us
(Edgar and Mike) mail and a copy of the new code.  We hope this
program will become popular and will be modified and improved by the
net.

Miscellaneous:

Version 1.3 CRYPTDSK now exits gracefully if an attempt is made to          +
write to a write-protected diskette.                                        +

Version 1.3 SECTSR has been modified to align the internal stack and        +
some data fields. This may marginally improve performance on 16/32-bit      +
PC's.                                                                       +

Note that Version 1.3A CRYPTDSK and LOGIN -require- use of Version 1.3A     +
SECTSR. Do not mix modules of different versions!                           +