Collection of Hack-Phreak Scene Programs/cleanhpvac.zip/cleanhpvac/PCGPEV10.ZIP/TUT3.TXT

Text File | 1994-05-05 | 21KB | 625 lines

                   ╒═══════════════════════════════╕
                   │         W E L C O M E         │
                   │  To the VGA Trainer Program   │ │
                   │              By               │ │
                   │      DENTHOR of ASPHYXIA      │ │ │
                   ╘═══════════════════════════════╛ │ │
                     ────────────────────────────────┘ │
                       ────────────────────────────────┘

                           --==[ PART 3 ]==--



■ Introduction



Greetings! This is the third part of the VGA Trainer series! Sorry it
took so long to get out, but I had a running battle with the traffic
department for three days to get my car registered, and then the MailBox
went down. Ahh, well, life stinks. Anyway, today will do some things
vital to most programs : Lines and circles.

Watch out for next week's part : Virtual screens. The easy way to
eliminate flicker, "doubled sprites", and subjecting the user to watch
you building your screen. Almost every ASPHYXIA demo has used a virtual
screen (with the exception of the SilkyDemo), so this is one to watch out
for. I will also show you how to put all of these loose procedures into
units.

If you would like to contact me, or the team, there are many ways you
can do it : 1) Write a message to Grant Smith in private mail here on
                  the Mailbox BBS.
            2) Write a message here in the Programming conference here
                  on the Mailbox (Preferred if you have a general
                  programming query or problem others would benefit from)
            3) Write to ASPHYXIA on the ASPHYXIA BBS.
            4) Write to Denthor, Eze or Livewire on Connectix.
            5) Write to :  Grant Smith
                           P.O.Box 270 Kloof
                           3640
            6) Call me (Grant Smith) at 73 2129 (leave a message if you
                  call during varsity)

NB : If you are a representative of a company or BBS, and want ASPHYXIA
       to do you a demo, leave mail to me; we can discuss it.
NNB : If you have done/attempted a demo, SEND IT TO ME! We are feeling
        quite lonely and want to meet/help out/exchange code with other demo
        groups. What do you have to lose? Leave a message here and we can work
        out how to transfer it. We really want to hear from you!


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
■  Circle Algorithim

You all know what a circle looks like. But how do you draw one on the
computer?

You probably know circles drawn with the degrees at these points :

                                0
                              ▄█|█▄
                             ███|███
                        270 ----+---- 90
                             ███|███
                              ▀█|█▀
                               180

Sorry about my ASCI ;-) ... anyway, Pascal doesn't work that way ... it
works with radians instead of degrees. (You can convert radians to degrees,
but I'm not going to go into that now. Note though that in pascal, the
circle goes like this :

                               270
                              ▄█|█▄
                             ███|███
                        180 ----+---- 0
                             ███|███
                              ▀█|█▀
                                90


Even so, we can still use the famous equations to draw our circle ...
(You derive the following by using the theorem of our good friend
Pythagoras)
                     Sin (deg) = Y/R
                     Cos (deg) = X/R
(This is standard 8(?) maths ... if you haven't reached that level yet,
take this to your dad, or if you get stuck leave me a message and I'll
do a bit of basic Trig with you. I aim to please ;-))

Where Y = your Y-coord
      X = your X-coord
      R = your radius (the size of your circle)
      deg = the degree

To simplify matters, we rewrite the equation to get our X and Y values :

                     Y = R*Sin(deg)
                     X = R*Cos(deg)

This obviousy is perfect for us, because it gives us our X and Y co-ords
to put into our putpixel routine (see Part 1). Because the Sin and Cos
functions return a Real value, we use a round function to transform it
into an Integer.

     Procedure Circle (oX,oY,rad:integer;Col:Byte);
     VAR deg:real;
         X,Y:integer;
     BEGIN
       deg:=0;
       repeat
         X:=round(rad*COS (deg));
         Y:=round(rad*sin (deg));
         putpixel (x+ox,y+oy,Col);
         deg:=deg+0.005;
       until (deg>6.4);
     END;

In the above example, the smaller the amount that deg is increased by,
the closer the pixels in the circle will be, but the slower the procedure.
0.005 seem to be best for the 320x200 screen. NOTE : ASPHYXIA does not use
this particular circle algorithm, ours is in assembly language, but this
one should be fast enough for most. If it isn't, give us the stuff you are
using it for and we'll give you ours.


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
■  Line algorithms

There are many ways to draw a line on the computer. I will describe one
and give you two. (The second one you can figure out for yourselves; it
is based on the first one but is faster)

The first thing you need to do is pass what you want the line to look
like to your line procedure. What I have done is said that x1,y1 is the
first point on the screen, and x2,y2 is the second point. We also pass the
color to the procedure. (Remember the screens top left hand corner is (0,0);
see Part 1)

Ie.            o  (X1,Y1)
                ooooooooo
                         ooooooooo
                                  oooooooo  (X2,Y2)

Again, sorry about my drawings ;-)

To find the length of the line, we say the following :

           XLength = ABS (x1-x2)
           YLength = ABS (y1-y2)

The ABS function means that whatever the result, it will give you an
absolute, or posotive, answer. At this stage I set a variable stating
wheter the difference between the two x's are negative, zero or posotive.
(I do the same for the y's) If the difference is zero, I just use a loop
keeping the two with the zero difference posotive, then exit.

If neither the x's or y's have a zero difference, I calculate the X and Y
slopes, using the following two equations :

           Xslope = Xlength / Ylength
           Yslope = Ylength / Xlength

As you can see, the slopes are real numbers.
NOTE : XSlope = 1 / YSlope

Now, there are two ways of drawing the lines :

           X = XSlope * Y
           Y = YSlope * X

The question is, which one to use? if you use the wrong one, your line
will look like this :

        o
           o
              o

Instead of this :

        ooo
           ooo
              ooo

Well, the solution is as follows :

                           *\``|``/*
                           ***\|/***
                           ----+----
                           ***/|\***
                           */``|``\*

If the slope angle is in the area of the stars (*) then use the first
equation, if it is in the other section (`) then use the second one.
What you do is you calculate the variable on the left hand side by
putting the variable on the right hand side in a loop and solving. Below
is our finished line routine :

Procedure Line (x1,y1,x2,y2:integer;col:byte);
VAR x,y,xlength,ylength,dx,dy:integer;
    xslope,yslope:real;
BEGIN
  xlength:=abs (x1-x2);
  if (x1-x2)<0 then dx:=-1;
  if (x1-x2)=0 then dx:=0;
  if (x1-x2)>0 then dx:=+1;
  ylength:=abs (y1-y2);
  if (y1-y2)<0 then dy:=-1;
  if (y1-y2)=0 then dy:=0;
  if (y1-y2)>0 then dy:=+1;
  if (dy=0) then BEGIN
    if dx<0 then for x:=x1 to x2 do
      putpixel (x,y1,col);
    if dx>0 then for x:=x2 to x1 do
      putpixel (x,y1,col);
    exit;
  END;
  if (dx=0) then BEGIN
    if dy<0 then for y:=y1 to y2 do
      putpixel (x1,y,col);
    if dy>0 then for y:=y2 to y1 do
      putpixel (x1,y,col);
    exit;
  END;
  xslope:=xlength/ylength;
  yslope:=ylength/xlength;
  if (yslope/xslope<1) and (yslope/xslope>-1) then BEGIN
    if dx<0 then for x:=x1 to x2 do BEGIN
                   y:= round (yslope*x);
                   putpixel (x,y,col);
                 END;
    if dx>0 then for x:=x2 to x1 do BEGIN
                   y:= round (yslope*x);
                   putpixel (x,y,col);
                 END;
  END
  ELSE
  BEGIN
    if dy<0 then for y:=y1 to y2 do BEGIN
                   x:= round (xslope*y);
                   putpixel (x,y,col);
                 END;
    if dy>0 then for y:=y2 to y1 do BEGIN
                   x:= round (xslope*y);
                   putpixel (x,y,col);
                 END;
  END;
END;

Quite big, isn't it? Here is a much shorter way of doing much the same
thing :

function sgn(a:real):integer;
begin
     if a>0 then sgn:=+1;
     if a<0 then sgn:=-1;
     if a=0 then sgn:=0;
end;

procedure line(a,b,c,d,col:integer);
var u,s,v,d1x,d1y,d2x,d2y,m,n:real;
    i:integer;
begin
     u:= c - a;
     v:= d - b;
     d1x:= SGN(u);
     d1y:= SGN(v);
     d2x:= SGN(u);
     d2y:= 0;
     m:= ABS(u);
     n := ABS(v);
     IF NOT (M>N) then
     BEGIN
          d2x := 0 ;
          d2y := SGN(v);
          m := ABS(v);
          n := ABS(u);
     END;
     s := INT(m / 2);
     FOR i := 0 TO round(m) DO
     BEGIN
          putpixel(a,b,col);
          s := s + n;
          IF not (s<m) THEN
          BEGIN
               s := s - m;
               a:= a +round(d1x);
               b := b + round(d1y);
          END
          ELSE
          BEGIN
               a := a + round(d2x);
               b := b + round(d2y);
          END;
     end;
END;

This routine is very fast, and should meet almost all of your requirements
(ASPHYXIA used it for quite a while before we made our new one.)
In the end program, both the new line routine and the circle routine are
tested. A few of the procedures of the first parts are also used.

Line and circle routines may seem like fairly trivial things, but they are
a vital component of many programs, and you may like to look up other
methods of drawing them in books in the library (I know that here at the
varsity they have books for doing this kind of stuff all over the place)
A good line routine to look out for is the Bressenhams line routine ...
there is a Bressenhams circle routine too ... I have documentaiton for them
if anybody is interested, they are by far some of the fastest routines
you will use.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
■  In closing

Varsity has started again, so I am (shock) going to bed before three in
the morning, so my quote this week wasn't written in the same wasted way
my last weeks one was (For last week's one, I had gotten 8 hours sleep in
3 days, and thought up and wrote the quote at 2:23 am before I fell asleep.)

        [  "What does it do?" she asks.
           "It's a computer," he replies.
           "Yes, dear, but what does it do?"
           "It ..er.. computes! It's a computer."
           "What does it compute?"
           "What? Er? Um. Numbers! Yes, numbers!" He smiles
              worriedly.
           "Why?"
           "Why? Well ..um.. why?" He starts to sweat.
           "I mean, is it just something to dust around, or does
              it actually do something useful?"
           "Um...you can call other computers with it!" Hope lights
              up his eyes. "So you can get programs from other computers!"
           "I see. Tell me, what do these programs do?"
           "Do? I don't think I fol..."
           "I see. They compute. Numbers. For no particular reason." He
              withers under her gaze.
           "Yes, but..."
           She smiles, and he trails off, defeated. She takes another look
               at the thing. "Although," she says, with a strange look in
               her eyes. He looks up, an insane look of hope on his
               face. "Does it come in pink?" she asks.
                                                                           ]
                                                     - Grant Smith
                                                        Tue 27 July, 1993
                                                         9:35 pm.

See you next time,
    - Denthor


┌──────────────┬─────────────────────────────────────────────────────────────
│ TUTPROG3.PAS │
└──────────────┘

{$X+}
USES crt;

CONST VGA = $a000;

VAR loop1:integer;
    Pall : Array [1..199,1..3] of byte;
      { This is our temporary pallette. We ony use colors 1 to 199, so we
        only have variables for those ones. }

{──────────────────────────────────────────────────────────────────────────}
Procedure SetMCGA;  { This procedure gets you into 320x200x256 mode. }
BEGIN
  asm
     mov        ax,0013h
     int        10h
  end;
END;


{──────────────────────────────────────────────────────────────────────────}
Procedure SetText;  { This procedure returns you to text mode.  }
BEGIN
  asm
     mov        ax,0003h
     int        10h
  end;
END;


{──────────────────────────────────────────────────────────────────────────}
Procedure Putpixel (X,Y : Integer; Col : Byte);
  { This puts a pixel on the screen by writing directly to memory. }
BEGIN
  Mem [VGA:X+(Y*320)]:=Col;
END;


{──────────────────────────────────────────────────────────────────────────}
procedure WaitRetrace; assembler;
label
  l1, l2;
asm
    mov dx,3DAh
l1:
    in al,dx
    and al,08h
    jnz l1
l2:
    in al,dx
    and al,08h
    jz  l2
end;


{──────────────────────────────────────────────────────────────────────────}
Procedure Pal(ColorNo : Byte; R,G,B : Byte);
  { This sets the Red, Green and Blue values of a certain color }
Begin
   Port[$3c8] := ColorNo;
   Port[$3c9] := R;
   Port[$3c9] := G;
   Port[$3c9] := B;
End;


{──────────────────────────────────────────────────────────────────────────}
Procedure Circle (X,Y,rad:integer;Col:Byte);
  { This draws a circle with centre X,Y, with Rad as it's radius }
VAR deg:real;
BEGIN
  deg:=0;
  repeat
    X:=round(rad*COS (deg));
    Y:=round(rad*sin (deg));
    putpixel (x+160,y+100,col);
    deg:=deg+0.005;
  until (deg>6.4);
END;


{──────────────────────────────────────────────────────────────────────────}
Procedure Line2 (x1,y1,x2,y2:integer;col:byte);
  { This draws a line from x1,y1 to x2,y2 using the first method }
VAR x,y,xlength,ylength,dx,dy:integer;
    xslope,yslope:real;
BEGIN
  xlength:=abs (x1-x2);
  if (x1-x2)<0 then dx:=-1;
  if (x1-x2)=0 then dx:=0;
  if (x1-x2)>0 then dx:=+1;
  ylength:=abs (y1-y2);
  if (y1-y2)<0 then dy:=-1;
  if (y1-y2)=0 then dy:=0;
  if (y1-y2)>0 then dy:=+1;
  if (dy=0) then BEGIN
    if dx<0 then for x:=x1 to x2 do
      putpixel (x,y1,col);
    if dx>0 then for x:=x2 to x1 do
      putpixel (x,y1,col);
    exit;
  END;
  if (dx=0) then BEGIN
    if dy<0 then for y:=y1 to y2 do
      putpixel (x1,y,col);
    if dy>0 then for y:=y2 to y1 do
      putpixel (x1,y,col);
    exit;
  END;
  xslope:=xlength/ylength;
  yslope:=ylength/xlength;
  if (yslope/xslope<1) and (yslope/xslope>-1) then BEGIN
    if dx<0 then for x:=x1 to x2 do BEGIN
                   y:= round (yslope*x);
                   putpixel (x,y,col);
                 END;
    if dx>0 then for x:=x2 to x1 do BEGIN
                   y:= round (yslope*x);
                   putpixel (x,y,col);
                 END;
  END
  ELSE
  BEGIN
    if dy<0 then for y:=y1 to y2 do BEGIN
                   x:= round (xslope*y);
                   putpixel (x,y,col);
                 END;
    if dy>0 then for y:=y2 to y1 do BEGIN
                   x:= round (xslope*y);
                   putpixel (x,y,col);
                 END;
  END;
END;


{──────────────────────────────────────────────────────────────────────────}
procedure line(a,b,c,d,col:integer);
  { This draws a line from x1,y1 to x2,y2 using the first method }

    function sgn(a:real):integer;
    begin
         if a>0 then sgn:=+1;
         if a<0 then sgn:=-1;
         if a=0 then sgn:=0;
    end;

var u,s,v,d1x,d1y,d2x,d2y,m,n:real;
    i:integer;
begin
     u:= c - a;
     v:= d - b;
     d1x:= SGN(u);
     d1y:= SGN(v);
     d2x:= SGN(u);
     d2y:= 0;
     m:= ABS(u);
     n := ABS(v);
     IF NOT (M>N) then
     BEGIN
          d2x := 0 ;
          d2y := SGN(v);
          m := ABS(v);
          n := ABS(u);
     END;
     s := INT(m / 2);
     FOR i := 0 TO round(m) DO
     BEGIN
          putpixel(a,b,col);
          s := s + n;
          IF not (s<m) THEN
          BEGIN
               s := s - m;
               a:= a +round(d1x);
               b := b + round(d1y);
          END
          ELSE
          BEGIN
               a := a + round(d2x);
               b := b + round(d2y);
          END;
     end;
END;


{──────────────────────────────────────────────────────────────────────────}
Procedure PalPlay;
  { This procedure mucks about with our "virtual pallette", then shoves it
    to screen. }
Var Tmp : Array[1..3] of Byte;
  { This is used as a "temporary color" in our pallette }
    loop1 : Integer;
BEGIN
   Move(Pall[199],Tmp,3);
     { This copies color 199 from our virtual pallette to the Tmp variable }
   Move(Pall[1],Pall[2],198*3);
     { This moves the entire virtual pallette up one color }
   Move(Tmp,Pall[1],3);
     { This copies the Tmp variable to the bottom of the virtual pallette }
   WaitRetrace;
   For loop1:=1 to 199 do
     pal (loop1,pall[loop1,1],pall[loop1,2],pall[loop1,3]);
END;


BEGIN
  ClrScr;
  Writeln ('This sample program will test out our line and circle algorithms.');
  Writeln ('In the first part, many circles will be draw creating (hopefully)');
  Writeln ('a "tunnel" effect. I will the rotate the pallete to make it look');
  Writeln ('nice. I will then draw some lines and rotate the pallette on them');
  Writeln ('too. Note : I am using the slower (first) line algorithm (in');
  Writeln ('procedure line2). Change it to Procedure Line and it will be using');
  Writeln ('the second line routine. NB : For descriptions on how pallette works');
  Writeln ('have a look at part two of this series; I won''t re-explain it here.');
  Writeln;
  Writeln ('Remember to send me any work you have done, I am most eager to help.');
  Writeln; Writeln;
  Writeln ('Hit any key to continue ...');
  Readkey;
  setmcga;

  For Loop1 := 1 to 199 do BEGIN
    Pall[Loop1,1] := Loop1 mod 30+33;
    Pall[Loop1,2] := 0;
    Pall[Loop1,3] := 0;
  END;
       { This sets colors 1 to 199 to values between 33 to 63. The MOD
         function gives you the remainder of a division, ie. 105 mod 10 = 5 }

   WaitRetrace;
   For loop1:=1 to 199 do
     pal (loop1,pall[loop1,1],pall[loop1,2],pall[loop1,3]);
        { This sets the true pallette to variable Pall }

  for loop1:=1 to 90 do
    circle (160,100,loop1,loop1);
       { This draws 90 circles all with centres at 160,100; with increasing
         radii and colors. }

  Repeat
    PalPlay;
  Until keypressed;
  Readkey;

  for loop1:=1 to 199 do
    line2 (0,1,319,loop1,loop1);   { *** Replace Line2 with Line to use the
                                         second line algorithm *** }
       { This draws 199 lines, all starting at 0,1 }

  Repeat
    PalPlay;
  Until keypressed;

  readkey;
  SetText;
  Writeln ('All done. Okay, so maybe it wasn''t a tunnel effect, but you get the');
  Writeln ('general idea ;-) This concludes the third sample program in the ASPHYXIA');
  Writeln ('Training series. You may reach DENTHOR under the name of GRANT SMITH');
  Writeln ('on the MailBox BBS, or leave a message to ASPHYXIA on the ASPHYXIA BBS.');
  Writeln ('Get the numbers from Roblist, or write to :');
  Writeln ('             Grant Smith');
  Writeln ('             P.O. Box 270');
  Writeln ('             Kloof');
  Writeln ('             3640');
  Writeln ('I hope to hear from you soon!');
  Writeln; Writeln;
  Write   ('Hit any key to exit ...');
  Readkey;
END.