home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Collection of Hack-Phreak Scene Programs
/
cleanhpvac.zip
/
cleanhpvac
/
ELEC.ZIP
/
TERROR!.TXT
< prev
Wrap
Text File
|
1998-01-21
|
5KB
|
110 lines
Electronic Terrorism
By: King Tut
It starts when a big, dumb lummox rudely insults you. Being
of a rational, intelligent disposition, you wisely choose to
avoid a (direct) confrontation. But as he laughs in your face,
you smile inwardly---your revenge is already planned.
Step 1: follow your victim to his locker, car, or house. Once
you have chosen your target site, lay low for a week or
more, letting your anger boil.
Step 2: in the mean time, assemble your versatile terrorist
kit(details below.)
Step 3: plant your kit at the desig- nated target site on a
monday morning between the hours of 4:00 am and 6:00
am. Include a calm, suggestive note that quietly hints
at the possibility of another attack. Do not write it
by hand! An example of an effective note:
"don't be such a jerk, or the
next one will take off your
hand. Have a nice day."
Notice how the calm tone instills fear. As if written by
a homicidal psychopath.
Step 5: choose a strategic location overlooking the target site.
Try to position yourself in such a way that you can see
his facial contortions.
Step 6: sit back and enjoy the fireworks!
Assembly of the versatile, economic, and effective terrorist kit
#1:
the parts you'll need are:
1) 4 aa batteries
2) 1 9-volt battery
3) 1 spdt mini relay (radio shack)
4) 1 rocket engine(smoke bomb or m-80)
5) 1 solar ignitor (any hobby store)
6) 1 9-volt battery connector
step 1: take the 9-volt battery and wire it through the relay's
coil. This circuit should also include a pair of
contacts that when separated cut off this circuit.
These contacts should be held together by trapping them
between the locker,mailbox, or car door. Once the door
is opened, the contacts fall apart and the 9-volt
circuit is broken, allowing the relay to fall to the
closed postion thus closing the ignition circuit. (If
all this is confusing take a look at the schematic
below.)
Step 2: take the 4 aa batteries and wire them in succession.
Wire the positive terminal of one to the negative
terminal of another, until all four are connected
except one positive terminal and one negative terminal.
Even though the four aa batteries only combine to create
6 volts, the increase in amperage is necessary to
activate the solar ignitor quickly and effectively.
Step 3: take the battery pack (made in step 2) and wire one end
of it to the relay's single pole and the other end to
one prong of the solar ignitor. Then wire the other
prong of the solar ignitor back to the open position on
the relay.
Step 4: using double sided carpet tape mount the kit in his
locker, mailbox, or car door. And last, insert the solar
ignitor into the rocket engine (smoke bomb or m-80).
Your kit is now complete!
---------><---------
I (CONTACTS) I
I I
I --- (9 VOLT)
I - (BATTERY)
I ---
I I
I (COIL) I
------///////-------
/-----------
/ I
/ I
/ I
(SWITCH) I I
I I
I I
I I
I --- (BATTERY)
I - ( PACK )
I ---
I I
I I
---- -----
I I
*
(SOLAR IGNITOR)