home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Collection of Hack-Phreak Scene Programs
/
cleanhpvac.zip
/
cleanhpvac
/
ACID4IOD.ZIP
/
ACIDVIEW.CFG
< prev
next >
Wrap
Text File
|
1995-09-02
|
4KB
|
146 lines
; ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
; │ ACiDView 3.06 Configuration (.CFG) file - ACiD Productions(tm) 1994-95 │
; │ See ACiDVIEW.NFO for more information │
; ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
;────────────────────────────────── Notes ───────────────────────────────────
; The format of the commands below MUST be left as it is. You should only
; modify the information after the : mark, or after the = mark if it
; is a toggle.
;───────────────────────────── Start Up Config ──────────────────────────────
RESOLUTION=TEXT
; The resolution ANSI and BIN are displayed in
; TEXT, XGA, VGA, SVGA1, SVGA2, SVGA3, SVGA3
BAD MODES:
:END BAD MODES
; List of RESOLUTIONs not to be used
; XGA, VGA, SVGA1, SVGA2, SVGA3, SVGA4
iCE COLOR=OFF
; Determines if ANSI and BIN blinks or allows 16 background colors,
; aka iCE Color. If ON blinking is not possible
;ON, OFF
COLOR=COLOR
; What coloring to use for ANSI and BIN
; COLOR = Full color
; GREY = Grey scale
; ASCII = No color
; COLOR, GREY, ASCII
ASPECT RATIO=25
; How ANSI and BIN "look"
; 25 = Looks like 25x80 text mode
; 50 = Looks like 50x80 text mode
; 25, 50
WIDE=OFF
; If turned on ANSI and BIN are scaled up by about 2X when graphicly
; interpreted
; ON, OFF
VIEWING=READ
; Determines how ANSI is viewed
; READ = Interputed then displayed
; VIEW = Displayed as it is interputed (ANSImation)
; VIEW, READ
TAGGING=SHOW
; Determines what file tagging is used for
; SHOW = Slide show
; DUAL = Dual mode (See ACIDVIEW.NFO for more information)
; SHOW, DUAL
BPS=OFF
; BPS rate to simulate durring ANSI and RIP display, must be in VIEW
; mode to use with ANSI
; OFF, #
MASK=*.*
; Used to "filter" the files shown. 1 mask allowed.
EXCLUDE:
ARC
ARJ
BMP
COM
DRV
EXE
HLP
JPG
LZH
MOD
PAK
S3M
WAV
ZIP
ZOO
:END EXCLUDE
; List of extensions to be excluded from file listings and command line
; operation
BOUNCE=ON
; Whether or not BIN viewing in TEXT mode bounces when the edge is reached
; ON, OFF
;─────────────────────────── Misc. Configuration ────────────────────────────
FONT DIR=.
; Only needed for ACiD ViEW Pro
; Where the BGI fonts are located (.CHR files.)
B. SMOOTH=100
; Accuracy of Bezier Curve generation. Lower values are faster, however
; less accurate (can cause problems with flood filling.) If you have a slow
; processor, this value is worth playing with, but if you have a Pentium
; just set it to 200 and don't worry about it.
; 1 - 200
SVGA=AUTO
; Used to configure the SVGA routies
; AUTO = Auto detect SVGA chipset
; NONE = No SVGA card present
; VESA = Use VESA extended BIOS
; 1 = VESA BiOS
; 2 = Ahead "A" type
; 3 = Ahead "B" type
; 4 = ATI 18800
; 5 = ATI 18800-1
; 6 = ATI 28800
; 7 = Chips & Technologies 82c451/455/456
; 8 = Chips & Technologies 82c452
; 9 = Chips & Technologies 82c453
; 10 = Genoa 600 series
; 11 = Oak OTi-O67
; 12 = Paradise PVGAla
; 13 = Paradise WD90C00/WD90C10
; 14 = Paradise WD90C11
; 15 = Trident 8800
; 16 = Trident 8900
; 17 = Tseng ET3000
; 18 = Tseng ET4000
; 19 = Video 7
; 20 = Cirrus Logic 54OO series
; 21 = S3
; 22 = Trident 89OOB/89OOC
;NONE, AUTO, VESA #
MULTIFRIENDLY=OFF
; Whether to use the quick and simple interface and disable BPS simulation
; Automaticly turned on if using a multi-tasker
; ON, OFF
LOG DIRECTORY=ON
; This is the toggle for ACiD View to load directories into the file listing.
; OFF = no directory changing will be available.
; ON, OFF
LOG DRIVE=ON
; This is the toggle for ACiD View to load drives into the file listing.
; OFF = no drive changing will be available.
; ON, OFF
; ─────────────────────────── END OF ACiDVIEW.CFG ───────────────────────────