home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Hacker 2
/
HACKER2.mdf
/
phreak
/
pay1.txt
< prev
next >
Wrap
Text File
|
1995-01-03
|
3KB
|
55 lines
MAD! PRESENTS...
THE ABC'S OF PAYPHONES PART 1
The information presented in this file is for entertainment purposes
only. The authors of this file take no responsibiltiy for any of its
contents.
The following text file is for AT&T & GTE payphones from 1982-1985. some
things are different on gte phones, so additions are included for them.
Section 1:The coin slot
For every 5 cents you put in a phone, a sound is made. After you put
the coins in the slot, they pass through a totalizer which counts them.
They then collect in a hopper. To empty out the hopper, all you have to
do is activate the coin relay. Payphones sometimes hold $100 or more.
To activate the relay place 5 cents in the phone. Stick a magnet up the
coin slot about 5 inches. Now remove the front panel of the phone. You
will see a series of wires. Cut the red and green wires. Now in the
front of the panel you will see three screws. Touch the green wire to
the third screw. Better have a hat ready, because alot of change is
gonna come flooding out. Isn't this fun?
Section 2:free credits
If you have a friend in germany you need to call this sections for you.
One of the cheap things about pay phones is they depend on tones to tell
them you inserted money. Well if you have a red box these tones are
easily duplicated, but i want to show you how do it without boxes in
this file. Now Some thing you need are...
A set of screwdrivers. You will need both philips and flathead. Now
open the front panel of the phone and cut the red and green wires. Take
the cover off the top of the phone and insert 5 cents. You should hear
nothing. Find a green wire coming from the coin slot down to the
hopper. Disconnect that wire. Now take off the case and you will see a
small switch. Move the switch. This sets the totalizer backwards 1.
Now put the hopper cover back on and reconnect the wire. Go back to the
front panel. Feel to the right of the two screws. You should feel 4
jumpers. 1 of the jumpers should be disconnected. Reconnect it. Now
cut the top jumper. You should hear a loud pop. Now touch the green
wire to the second screw. You will hear the sound of twenty five cents
being inserted. You now have 30 cents credit. Repeat as many times as
you need. Now reconnect the green wire and dial your number.
GTE Notes:
The green wire will be white. The red one will be blue. The totalizer
is located at the bottem of the front panel.
In part 2 we will show you how to take the payphone apart, and how to
take one home.
Downloaded From P-80 International Information Systems 304-744-2253