home *** CD-ROM | disk | FTP | other *** search
/ Current Shareware 1994 January / SHAR194.ISO / modem / alphpg.zip / PAGER.DOC < prev    next >
Text File  |  1993-06-08  |  8KB  |  192 lines

  1. INTRODUCTION
  2.  
  3. The DPD (Data Processing Directions) Alphanumeric Paging Software
  4. is designed to perform batch operation of message transmission from
  5. a PC to a message carrier via a Hayes compatible modem. It is
  6. written to transmit two fields per envelope: destination id and
  7. message. A message is currently limited to four twenty character
  8. lines. This accomplished by a menu driven software system that
  9. permits simple selection of needed functions.
  10.  
  11. Functions are logically grouped to minimize screen switching and to
  12. present routinely used functions together in a common selection
  13. mechanism.
  14.  
  15. GENERAL PROCEDURES
  16.  
  17. Help
  18.  
  19. Context sensitive help is available for many screens and functions.
  20. Pressing function key F1 will call up a help screen when one is
  21. available. To exit from a help screen, press the ESC key. While the
  22. help screens do not replace this manual, they are designed to
  23. complement this manual to enable you to use the system.
  24.  
  25. Menus
  26.  
  27. When you first start the program, you will see a menu offering you
  28. the basic system selections. In all menus you may select an item by
  29. using the arrow keys to highlight the desired item or you may type
  30. the first letter of the item. If there is more than one item
  31. starting with the same letter, repeated entry of that letter will
  32. cycle through the target items. Once properly positioned, press
  33. enter to complete the selection.
  34.  
  35. Tables
  36.  
  37. A tables is a selection mechanism that permits adding, deleting,
  38. and changing of data items. These functions are invoked by the
  39. INSERT, DELETE and ENTER keys. Some tables will have a "locator"
  40. field in the upper left hand corner of the screen. If the locator
  41. field is present, entering data will position the selection bar on
  42. the item containing data most closely matching the selection
  43. criteria that you are entering. Other tables may offer filter data
  44. next to the locator field. Entering data into this field will limit
  45. the display of table data to items exactly matching the filter
  46. item.
  47.  
  48. Forms
  49.  
  50. A form is a window that allows an individual record to be added,
  51. changed or deleted. Forms are usually opened based upon a table
  52. response. A form may be terminated and its effects reversed by
  53. pressing CTRL-ESC.
  54.  
  55. Response Windows
  56.  
  57. A response window is a window that opens in response to some menu
  58. selections. It will allow you to enter additional information to
  59. control your requested process.
  60.  
  61. Navigation Keys.
  62.  
  63. Key                          Function
  64. ---                          --------
  65. Enter                        Accept Data in field
  66. CTRL-Enter                   Accept Data in record
  67. CTRL-Home                    Erase current field
  68. CTRL-End                     Erase to end of field
  69. Esc                          Cancel change to field
  70. Insert                       Add new record
  71.                              Enter char insert mode
  72. Home                         Go to top of screen
  73.                              Go to beginning of field
  74. Pg Up                        Go to top of screen or scroll up one page
  75. Delete                       Delete record or character
  76. End                          Go to bottom of window
  77.                              Go to last char of field
  78. Pg Down                      Go to bottom of screen of scroll down one
  79.                              page
  80. Arrow Keys                   Move cursor.
  81.  
  82. The addition of pressing the control key while pressing one of the
  83. above function keys alters the function of the key. CTRL-esc will
  84. cancel changes and exit from a form, exit from a menu and response
  85. box. If you can't seem to get out of a function, ESC. If that fails
  86. try CTRL-esc. In the case of movement keys, the movement spans the
  87. entire file. In a field, CTRL-home deletes the data in the field
  88. while CTRL-end deletes the data from the cursor on.
  89.  
  90. INITIAL SETUP
  91.  
  92. There is a specific order in which the initial setup tasks must be
  93. performed to insure proper system initialization.
  94.  
  95. Setup Steps
  96. First:
  97.       Set up the terminals (the message distributor that you will
  98.       call) by selecting Configure System followed by System
  99.       Preferences. Prefix the phone number with dt or dp (see help
  100.       screens). 
  101.  
  102.       The modem init string contains the control sequences necessary
  103.       to cause the modem to function properly for dialing and task
  104.       initialization. It should include the AT code followed by the
  105.       codes to set no echo (E), quite mode off (Q0), numeric result
  106.       codes (V0) and extended result codes on (x4).
  107.       
  108.       Leaving the modem init string blank will default to "AT E L3
  109.       Q0 X4 V0 &C1 &D2", which is the string that seems to work the
  110.       best. Your modem manual will offer you a complete description
  111.       of control commands. Note: if only one terminal is entered it
  112.       will be used automatically. If more than one is entered, you
  113.       will be prompted for which one prior to sending messages.
  114.  
  115. Second:
  116.       Set up the pagers by selecting Pager Setup. If you wish to
  117.       enter groups, they must be established (under the message and
  118.       group maintenance menu item) before they can be referenced by
  119.       the pager record.
  120.  
  121. To send a message:
  122.       Select Send a Message from the main menu. To write the message
  123.       select Compose a message. The help screens should offer enough
  124.       help to get you started. Just remember ESC gets you out of the
  125.       help function. If you elect to send the message later, it will
  126.       be queued to the message file as an open item ("snt flg" = O).
  127.       Selecting Send Messages from the message composer screen will
  128.       cause all messages (up to the count entered) to be sent to the
  129.       run time selected terminal. If you have entered messages that
  130.       should be directed to different terminals, it would be
  131.       necessary to limit the send by using the count. However, the
  132.       intent is that messages be sent now and directed to one
  133.       terminal.
  134.  
  135. Observations:
  136.       Since messages, in a given transmission, are directed to one
  137.       terminal; pagers on different terminals should NOT belong to
  138.       the same group.
  139.  
  140. Notes on operation:
  141.       There is a two second guard time before and after the modem
  142.       escape sequence (+++) yielding a four second delay prior to
  143.       dialing.
  144.  
  145.       A low/hi tone indicates a timeout retransmission. Two high
  146.       tones indicate a successful operation.
  147.  
  148.       When the program disconnects, it simply returns to the send
  149.       menu. If multiple messages were sent, examining the message
  150.       file (checking the "snt flg") will indicate the success of
  151.       failure of the transmissions. If only one message is sent, the
  152.       error indication will stay on the screen long enough to be
  153.       obvious.
  154.  
  155. Finally:
  156.       This is a shareware product. You are free to try it without
  157.       incurring any expense liability and you may copy the
  158.       distribution file and pass it on to others (please). However,
  159.       if you intend to use it you are obligated to pay for it. I am
  160.       asking eighteen dollars 
  161.  
  162.       Paying for it offers these advantages: 1) you will have a
  163.       clear conscience - knowing that you have helped a struggling
  164.       software developer survive another day, and 2) you will be
  165.       informed on how to get rid of the annoying commercial beep -
  166.       boop screen.
  167.  
  168.       Please note: I am more that willing (even anxious) to hear
  169.       suggestions about product improvement or, if you are a
  170.       registered user and have problems, I will help you resolve
  171.       them by telephone or Compuserve Email.
  172.  
  173. NEW:
  174.       There is a "drone" version of the program available that
  175.       permits the sending of messages but has NO configuration
  176.       capabilities.  Useful for satellite distribution.
  177.  
  178. Name:___________________________________
  179.  
  180. Address:________________________________
  181.  
  182. Compuserve ID:__________________________
  183.  
  184. How Obtained:___________________________
  185.  
  186. Make check payable to:
  187. Data Processing Directions, Ltd.
  188. 1241 Walters Avenue
  189. Baltimore, MD 21239-2827
  190. 410/323-6752
  191. Compuserve ID:71076,1177
  192.