home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Current Shareware 1994 January
/
SHAR194.ISO
/
hardutil
/
sgascsi.zip
/
ST1201N.TXT
< prev
next >
Wrap
Text File
|
1991-10-30
|
6KB
|
126 lines
SEAGATE TECHNOLOGY, INC.
Customer Technical Support FAX Network +1 408 438-8137
Customer Technical Support Bulletin Boards (300-9600, 8-N-1)
┌──────────────────────────────────┬─────────────────────────────────┐
│ United States +1 408 438-8771 │ United Kingdom +44 628 478011 │
├──────────────────────────────────┼─────────────────────────────────┤
│ Germany +49 89 140-9331 │ Singapore +65 227-2217 │
└──────────────────────────────────┴─────────────────────────────────┘
(C)opyright 1991
ST-1201N (94351-200) Swift SCSI
┌───\
│ 0 │ 5
│ 0 │ G
│ 0 │ G
│ 0 │ 12 .................... o o o o o o
└───/ 1................... o o o o o o
════╤══════╤═╤══════╤═╤══════╤══════════════
1──────┘ 1──────┘ 1──────┘ 1 2 4 │ │ │
Terminator Resistors ──┬── │ │ │
│ │ │ │ Terminator Power Select
Drive ID, binary - use ┼───┘ │ │ │ Header located on the side
ID 0 (no jumpers) for │ │ │ │ ──────────────────────────
single drive install ┘ │ │ │ (Back) A B (Front of drive)
Enable Parity Checking ────────┘ │ │ C D
Enable Motor Start Option ──────────┘ │ ══╤══════════P═W═A
Synchronized Spindle ────────────┘ │
│
┌─────────────────────────────────────────┘
─┼─
A-B Drive from Power Connector (factory default)
A-C Drive from SCSI Bus
A-C&B-D Drive from Power Connector and Provide to SCSI Bus
B-D Only provide to SCSI Bus
Swift with Shrouded SCSI Connector
┌───\
│ 0 │ 5 ┌─ If the SCSI connector has a plastic shroud,
│ 0 │ G │ note pin-1 on cable and T-res.
│ 0 │ G │
│ 0 │ 12 ╔════════════════════╗ o o o o o o
└───/ ║:::::::::::::::::::1║ o o o o o o
════╤══════╤═╤══════╤═╤══════╤══════════════
└──────1 └──────1 └──────1 1 2 4 │ │ │
Terminator Resistors ──┬── │ │ │
│ │ │ │ Terminator Power Select
Drive ID, binary - use ┼───┘ │ │ │ Header located on the side
ID 0 (no jumpers) for │ │ │ │ ──────────────────────────
single drive install ┘ │ │ │ (Back) A B (Front of drive)
Enable Parity Checking ────────┘ │ │ C D
Enable Motor Start Option ──────────┘ │ ══╤══════════P═W═A
Synchronized Spindle ────────────┘ │
│
┌─────────────────────────────────────────┘
─┼─
A-B Drive from Power Connector (factory default)
A-C Drive from SCSI Bus
A-C&B-D Drive from Power Connector and Provide to SCSI Bus
B-D Only provide to SCSI Bus
ST-1201N
94351-200 Swift
UNFORMATTED CAPACITY (MB) ________________201
FORMATTED CAPACITY (36 SECTORS/1 SPARED)__171.9
ACTUATOR TYPE ____________________________VOICE COIL
TRACKS ___________________________________9,612
CYLINDERS ________________________________1,068
HEADS ____________________________________9
DISCS ____________________________________5
MEDIA TYPE _______________________________THIN FILM
RECORDING METHOD _________________________RLL (2,7)
TRANSFER RATE (mbytes/sec) _______________1.25
SPINDLE SPEED (RPM) ______________________3,600
AVERAGE LATENCY (mSEC) ___________________8.33
BUFFER ___________________________________32 or 64 Kbyte
Read Look-Ahead, Non-Adaptive,
Single-Segmented
INTERFACE ________________________________SCSI
SECTORS PER DRIVE ________________________335,790
TPI (TRACKS PER INCH) ____________________1,350
BPI (BITS PER INCH) ______________________28,282
AVERAGE ACCESS (ms) ______________________15
SINGLE TRACK SEEK (ms) ___________________4
MAX FULL SEEK (ms) _______________________35
MTBF (power-on hours) ____________________150,000
POWER REQUIREMENTS: +12V START-UP (amps) _2.5
+12V TYPICAL (amps) __0.7
+5V START-UP (amps) __0.75
+5V TYPICAL (amps) ___0.4
TYPICAL (watts) ______11
MAXIMUM (watts) ______34
BUFFERED STEP PULSE RATE (micro sec) _____6-200
WRITE PRECOMP (cyl) ______________________N/A (1069)
REDUCED WRITE CURRENT (cyl) ______________N/A (1069)
LANDING ZONE (cyl) _______________________AUTO PARK
IBM AT DRIVE TYPE ________________________0 or NONE
Already low-level formatted at the factory.
Swift Remote LED Option
Front View of Drive Without the Plastic Bezel
┌───┬───┐
│ A │ B │ B = Anode
├───┼───┤ D = Cathode
│ C │ D │
...═════════════════╧═══╧═══╧═════P═W═A═══...
° Default jumper at C-D for LED mounted on drive PWA
° To use remote LED, remove jumper and extend B (Anode)
and D (Cathode).
° Swift LED kit 75912397 allows connection to a remote LED
° Swift LED kit 95913369 has an LED for attachment to the
system front bezel or a 5.25-inch frame kit
Seagate reserves the right to change, without notice, product
offerings or specifications. (6/26/90)