home *** CD-ROM | disk | FTP | other *** search
/ Current Shareware 1994 January / SHAR194.ISO / business / empmgr19.zip / EZADINFO.TXT < prev    next >
Text File  |  1993-10-25  |  9KB  |  139 lines

  1.     "EMPLOYEE MANAGER" was written to assist the small business owner in
  2.   tracking and recording employee personnel data and their work records. 
  3.   It saves countless hours of weekly wage calculations in determining
  4.   Regular Pay, Over-Time Pay, Gross Totals, Net Totals, & Myriad Deductions!
  5.   Simply enter the amount of hours worked and press ENTER..  The totals will
  6.   instantly appear and be recorded for printing & future referance per each
  7.   weekly payroll. For any employer who has had the arduous weekly chore of
  8.   hand-calculating gross wages against the confusing, multi-page, IRS WAGE 
  9.   WITHHOLDING TABLES, this program breaks the surly governmental bonds. It
  10.   calculates withholdings to the penny as opposed to the "give or take"
  11.   method used in FEDERAL WITHHOLDINGS TABLES.  You may also setup any of your
  12.   employees deduction withholdings to figure in; STATE TAXES, UNION DUES,
  13.   MEDICARE, SOCIAL SECURITY, PENSION FUND, STRAIGHT PAY DEDUCTIONS, etc.....
  14.   All data can then be researched/printed by any of several means. The most
  15.   useful method being; "QUARTERLY" wage data (search/view/print) as required
  16.   by most governmental accounting. It also shows MONTHLY totals and averages!
  17.     "EMPLOYEE MANAGER" will allow entry of up to 15 employees including 
  18.   their names, addresses, phone, SS#, dates of birth, & pay rates. You can
  19.   also search this data in any fashion, print mailing labels, phone lists, 
  20.   and even have a modem dial telephone numbers automatically!...
  21.                            ENTERING NEW EMPLOYEES
  22.     Select "EMPLOYEE" function & "ADD NEW EMPLOYEE" sub-function.  Type in
  23.   the employees personal data, name, address, phone, social security number,
  24.   etc. The last field (PAY RATE) is very important! Enter a "dollars & cents"
  25.   figure representing the hourly wage for this employee.  The program will
  26.   ask if the entry is "OK?".  Press "Y" or "N"  (Yes/No).  If "Y", then the
  27.   new employees' info will be recorded, and a new blank EMPLOYEE card screen
  28.   will appear.  Enter another employee or press ESCAPE to quit.
  29.  
  30.                           ASSIGNING PAYROLL DEDUCTIONS
  31.     All new employees are automatically assigned a Federal Deduction status
  32.   of claiming "SINGLE" with "0" allowances (dependants) and with an OVERTIME 
  33.   wage rate at Straight-Pay.. (as opposed to time and 1/2, etc).  In order to
  34.   change this, and assign other deductions from weekly gross pay, you must
  35.   select "EMPLOYEE" function & "DEDUCTIONS" sub-function.  You'll then see a
  36.   numbered list of all EMPLOYEE names to choose from.  Enter an employee's
  37.   number from the list, and the "DEDUCTIONS CARD" will appear.
  38.     Although this card is self-explanatory, there are a few things worth
  39.   mentioning. First of which is the US Federal Wage Withholdings Tax Tables
  40.   used to compute an employees withholdings.
  41.                        FEDERAL WITHHOLDINGS COMPUTATIONS
  42.      The current ShareWare version of "EMPLOYEE-MANAGER" contains US Federal
  43.   withholdings formulas based upon the "Table 1-WEEKLY PAY" structure.  This
  44.   Governmental table can change from year to year and so must the formulas
  45.   used in the program.  The version number on the opening screen, beneath
  46.   VT-Xpress logo, denotes the current US Federal Tax Table being used in the
  47.   program you have.      
  48.                          IE:  "by R.James VT-Xpress"
  49.                                       v1.93
  50.   "v1.93" means you have ShareWare version #1, using 1993 US Tax Tables......
  51.  
  52.                              OTHER DEDUCTIONS..
  53.      State Tax, Pension, Medicare, and Social Security deduction fields must
  54.    indicate the PERCENTAGE (ie; 2.33%, 12.57%, etc) taken from the GROSS PAY.
  55.    So, simply type in a number! No need to add "%" sign.  If your deduction
  56.    percentages total more than 100% (fire the employee!), the program will
  57.    advise you accordingly, and force a re-try!
  58.      The "STRAIGHT-PAY" deduction will take a set amount in dollars & cents
  59.    from the GROSS.  Use this for "savings plans", "union dues", etc........
  60.  
  61.                              ENTERING A PAYROLL
  62.      Select "WEEKLY PAYROLL" from main menu, & the "PREPARE WEEKLY PAYROLL" 
  63.    sub-function.  Enter the payrolls' date as prompted. Separate payroll entry
  64.    cards for each employee will appear.  Simpy enter the amount of REGULAR &
  65.    OVER-TIME (if any) HOURS worked by that employee.  Press ENTER, and watch
  66.    hours of tedious calculator work appear on screen instantly!  You can skip
  67.    any employee for that week by pressing "F5".  On-Screen prompts will guide
  68.    you through each step.  Once you select "P" to post each employee pay, the
  69.    data is appended to a newly created file named by the date and extension
  70.    named ".pay"...  So, payroll on 12/25/93 will be named=>  "931225.PAY"
  71.    This is not important other than to inform you how data is stored........
  72.      After the last employees' pay is posted, you may make a printout of the
  73.    weeks record for hard-copy files.  A printout of all wage allocations per
  74.    each employee on that payroll will print on a separate sheet as well as a
  75.    separate sheet(s) of individual "Pay Stubs".  The pay stubs contain all
  76.    wage data (to-the-penny) and can be clipped and given to employees along
  77.    with their pay or kept for future employer accounting purposes.  You can
  78.    however, select "PAYSTUB PRINTOUT" to print any set of stubs from any
  79.    specific payroll at a later date if you choose.
  80.  
  81.                           MANIPULATING RECORDS DATA
  82.      By selecting "RECORDS" from main menu you'll see 3 functions available.
  83.    ALL QUARTERLY PAYROLLS.. SINGLE EMPLOYEE PAYROLLS.. TOTALS PER MONTH & YEAR
  84.    Simply follow the On-Screen prompts to research any of the categories.  You
  85.    may find the "averages" in the TOTALS PER MONTH & YEAR function to be of
  86.    some interest in projecting future work/wage tallies.
  87.   
  88.                    SEARCHING/EDITING AN OLD EMPLOYEE RECORD
  89.      To change/edit a previously enter EMPLOYEE CARD (including hourly wage)
  90.    select "SEARCH" from main menu.  Enter a portion of the employees name and
  91.    press enter.  The old card will appear and you'll have several functions
  92.    available at this point.  All are pretty much self-explanatory including
  93.    one that "auto-dials" the employees telephone number if you have a modem!
  94.      In order to edit an existing card, take note of the "RECORD NUMBER" in
  95.    the lower right hand corner of the card.  Then return to the main menu and
  96.    select "EMPLOYEES" function and the "EDIT OLD RECORD" sub-function.  Enter
  97.    the "RECORD NUMBER" in the box when asked.  The EMPLOYEES' CARD will then 
  98.    appear and you may edit it accordingly.
  99.  
  100.                             
  101.                              GENERAL PRINTOUTS
  102.      Under the "PRINT" main menu you're given several ways to printout JUST
  103.    THE EMPLOYEE CARD record data (Payroll data is not used here). For instance
  104.    you can print a telephone list of all employees, or mailing labels for all
  105.    employees for Christmas cards, business notifications, etc.
  106.  
  107.                         MISCELANEOUS ITEMS & TIPS
  108.      The "MODEM SETUP" function simply tells the program what Communications
  109.    Port your computer system is using.  Usually, most systems use Com.Port #1
  110.      If you inadvertantly enter the date of an existing payroll, you'll be 
  111.    immediately alerted by the program!  If you actually wanted to rewrite any 
  112.    payroll you certainly may do so by answering <Y>es to the systems quiery..
  113.    This will completely over-write all posted data for the previous entry date.
  114.    As a matter of fact, we suggest testing & playing with the system somewhat
  115.    by doing exactly that. Enter a "test" payroll on the same date a few times!
  116.  
  117.                        
  118.                        
  119.                        
  120.                        
  121.                        
  122.                        PROGRAMMING TAILORED TO YOU!
  123.     
  124.     VT-Xpress will customize this basic "EMPLOYEE MANAGER" program to fit any
  125.   specific business needs, state tax tables, pension plans, form printouts,  
  126.   etc, for a nominal fee. For instance, several businesses in CT have already 
  127.   received upgrades whereby the horrendous CT State Income Tax tables have 
  128.   been programmed in!
  129.     The registered versions of "EMPLOYEE MANAGER" may already have some of
  130.   features you require as is! ($25 registration fee)...  Please drop us a
  131.   line detailing some of the things that could help your business out ....
  132.  
  133.                         Thanks for trying our software!
  134.                         
  135.                         R. James  VT-Xpress
  136.                         Box #25, Main St.
  137.                         Voluntown, CT  06384
  138.                         USA
  139.