home *** CD-ROM | disk | FTP | other *** search
- Well, here they are, and a fairly sorry bunch too (when compared with the
- collection for IMP :-/ )
-
- There are three "classes" of patches here: non-ZSM ones - these should work
- as is, because they were developed by other people. These are the .ASM
- and .Z80 sources. You get these "as is": I have no way of testing them.
- See Mike Freeman's comment about the speed limit in Oklahoma to be found
- in QT-ZORBA.ASM :-)
-
- The following .Z sources are my work, but untested. If you have one of the
- machines and are willing to try the patch out (and maybe fix it if it's
- wrong) I'd love to hear about it. These patches are:
-
- QT-MD34 Morrow MD34 / MD11 or whatever it's called
- QT-OTRON Otrona Attache
- QT-PCPI Apple ][ w/ PCPI and Super Serial Card
- QT-QX10 Epson QX 10
- QT-SB180 My version of Willy Gonnason's QT-SB180.Z80
- QT-HP125 Hewlett Packard HP125
-
- The remaining .Z sources are tried and tested and should work.
-
- You are on your own for applying the .ASM and .Z80 patches. However,
- ZSM.COM and ZPATCH.COM will apply the .Z patches. Get QTERM.COM, your
- QT- patch source (I'll use QT-C128 as an example) ZSM and ZPATCH all
- on your A: drive. Then say:
-
- A>ZSM QT-C128.Z
- A>ZPATCH QTERM.COM QT-C128.O
-
- And you're all set.
-
- NOTE!!!! There is one reported bug in V4.1e: the 'a' option for protocol
- receives doesn't work. The following patch source fixes the problem.
-
- --------------------------------------------
- ; QT-BEEP.Z - fix the failure of the 'a' option to beep when a protocol
- ; receive finishes.
-
- .org 0x02fa
- fix: push hl
- call 0x1765
- pop hl
- ret
-
- .org 0x210c
- call fix
- --------------------------------------------
-
- Apply just like the patches above, with ZSM and ZPATCH.
-
- Any questions / comments / pies in the face, you can reach me at the
- following addresses:
-
- .UUCP: .....!harvard!xait!lakart!pallio!dg
- Internet: dg%pallio.uucp@cfisun.cfi.com
- GEnie: D.GOODENOUGH
- Q-link: Delta G
- BBS's David Goodenough on all
-
- (617) 825-3135
- (617) 329-8528
- (617) 329-4237
- (617) 965-7046
-
- PLEASE get back to me with any reports about success / failure of any of
- these patches, and comments for improvements, new patches, anything.