home *** CD-ROM | disk | FTP | other *** search
/ Cheats, Hacks & Hints / Cheats_Hacks_and_Hints.bin / doom2 / info / dmfaq66d.txt < prev   
Text File  |  1994-12-10  |  35KB  |  702 lines

  1. ==============================
  2. =SECTION FOUR= TROUBLESHOOTING
  3. ==============================
  4.  
  5. --------------------------------------------
  6. CHAPTER [17]: Why won't DOOM work correctly?
  7. --------------------------------------------
  8.         This chapter helps you if you cannot get the game to function as it
  9. should.
  10.  
  11. [17-1]: How can I use SMARTDRV.EXE with DOOM?
  12. =============================================
  13.          Some people have been complaining about problems with DOOM and
  14. SMARTDRV.EXE.  DOOM is not completely compatible with SMARTDRV.EXE, but
  15. here is how you can get it to work.  Try putting the following command in
  16. your CONFIG.SYS (This will not work in the AUTOEXEC.BAT):
  17.  
  18.             DEVICE=C:\DOS\SMARTDRV.EXE DOUBLE_BUFFER
  19.  
  20.         The double buffering uses memory differently than the normal
  21. SMARTDRV.EXE commands.  This command will take up 2k of conventional RAM and
  22. cannot be loaded into high memory.  This has been tested on two machines that
  23. did not work with SMARTDRV.EXE, and this corrected the problem.
  24.  
  25. [17-2]: Why am I getting an "OUT OF MEMORY" error with DOOM?
  26. ============================================================
  27.         If you are receiving an "OUT OF MEMORY" error when attempting to run
  28. DOOM, you might want to attempt any of the following:
  29.  
  30.         (1) DOOM requires at least 4mb of RAM.  Check to make sure you have
  31. at least this amount.
  32.         (2) If you are using MS-DOS v6.xx, try holding down the LEFT SHIFT key
  33. during bootup.  This will stop all your TSRs from loading.  Remember to
  34. reinstall your mouse driver, however.
  35.         (3) If you are using MS-DOS v5.0, rename your AUTOEXEC.BAT to stop all
  36. your TSRs from booting.
  37.         (4) If you are using MS-DOS v6.xx, try running MEMMAKER to free up more
  38. RAM at bootup time.
  39.         (5) If you are using MS-DOS v6.xx, create a boot menu.  For details
  40. on creating a boot menu, type "HELP MENUITEM" at your MS-DOS prompt.
  41.         (5) Try running DOOM without using HIMEM and EMM386.  If you are
  42. using a different memory manager, try removing it instead.
  43.  
  44.  
  45. [17-3]: Why does DOOM crash when I start it?
  46. ============================================
  47.         Your motherboard may not be compatible with the DOS extender that
  48. DOOM uses.  Try getting DOOM v1.2.  If that still does not work, try running
  49. DOOM with one of the DOS extenders in the file "altdoom1.zip".  See Chapter
  50. [6] for more information on how to get these files.
  51.  
  52. [17-4]: How can I run DOOM under OS/2?
  53. ======================================
  54.         People have been having a lot of trouble getting DOOM v1.x to work
  55. under OS/2.  Native OS/2 code is being worked on, so hang in there!
  56. Here is a list of settings that many DOOM users have been able to use.
  57.  
  58. DOS_BACKGROUND_EXECUTION     OFF
  59. DOS_BREAK                    OFF
  60. DOS_FCBS                     16
  61. DOS_FCBS_KEEP                8
  62. DOS_FILES                    20
  63. DOS_HIGH                     OFF
  64. DOS_RMSIZE                   640
  65. DOS_UMB                      OFF
  66.  
  67. DPMI_DOS_API                 AUTO
  68. DPMI_MEMORY_LIMIT            8
  69. DPMI_NETWORK_BUFF_SIZE       8
  70.  
  71. EMS_FRAME_LOCATION           AUTO
  72. EMS_HIGH_OS_REGION           0
  73. EMS_LOW_OS_REGION            384
  74. EMS_MEMORY_LIMIT             2048
  75.  
  76. HW_NOSOUND                   OFF
  77. HW_ROM_TO_RAM                ON
  78. HW_TIMER                     ON
  79.  
  80. IDLE_SECONDS                 0
  81. IDLE_SENSITIVITY             100
  82.  
  83. INT_DURING_IO                ON
  84.  
  85. VIDEO_TRETRACE_EMULATION     OFF
  86. VIDEO_ROM_EMULATION          ON
  87. VIDEO_SWITCH_NOTIFICATION    OFF
  88.  
  89. XMS_HANDLES                  32
  90. XMS_MEMORY_LIMIT             2048
  91. XMS_MINIMUM_HMA               0
  92.  
  93. -----------------------------------------------------
  94. CHAPTER [18]: Why won't my sound card work with DOOM?
  95. -----------------------------------------------------
  96.  
  97.         This chapter helps fix problems with various sound cards in DOOM.
  98.  
  99. [18-1]: Why won't my Sound Blaster v1.0 or v1.5 work with DOOM?
  100. ===============================================================
  101.         The v1.0 shareware release of DOOM does not work correctly with
  102. earlier versions of the Sound Blaster.  It is recommended that you receive
  103. v1.2 of DOOM to fix this problem.  Information on getting this upgrade is
  104. available in Chapter [6].
  105.         If you insist on using v1.0 of DOOM, here are two different ways to
  106. fix your problem, although they are not guaranteed to work on all computers.
  107.  
  108.         (1)  If you have a turbo button on your computer, turn it off.  Run
  109. DOOM, and when the title screen appears, turn it back on.
  110.         (2)  Disable the internal cache.
  111.  
  112. [18-2]: Why won't my Sound Blaster Pro work with DOOM?
  113. ======================================================
  114.         If you are using an older graphics card that supports HiColor (16
  115. bit graphics) you may have trouble getting this to work correctly.  The
  116. only recommendation is to borrow a friend's graphics card.
  117.         DOOM v1.1 has a bug that keeps the Sound Blaster Pro from working
  118. on IRQ 2, and later versions do not allow usage on IRQ 10.
  119.  
  120. [18-3]: Why won't my Gravis UltraSound work with DOOM?
  121. ======================================================
  122.         To get DOOM to run properly with both music and digitized sound
  123. effects on the Gravis UltraSound use these three steps.
  124.  
  125. ////// SOUND //////
  126.  
  127. (1) Set your ULTRASND environment variable, and use GF1 IRQ less than 8
  128.  
  129.     example:  SET ULTRASND=220,1,1,7,5
  130.                                    |_______ GF1 IRQ
  131.  
  132. NOTE: DOOM v1.2 may be able to use any valid GF1 IRQ including 11,12,15
  133.       However, high IRQs are _not_ recommended.  See BUGS.
  134.  
  135.  
  136. ////// MUSIC //////
  137.  
  138. (2) Doom requires that you have installed the General MIDI patch set from
  139. the 2.06a Install Disks (or later) that came with your UltraSound (and are
  140. also available via FTP and BBS).  DOOM will find your patches (using the
  141. ULTRADIR variable) in the MIDI subdirectory pointed to by ULTRADIR.
  142.  
  143.     example:  SET ULTRADIR=C:\ULTRASND
  144.  
  145.     (DOOM will look in C:\ULTRASND\MIDI for the patches)
  146.  
  147. NOTE:  Step 3 is only required for DOOM v1.0 / Operating System 0.99
  148.  
  149. (3) You will also need to copy ULTRAMID.INI into your DOOM directory and
  150. rename it to DMXGUS.INI (or find and use the DMXGUS.INI file).  ULTRAMID.INI
  151. is a part of the UltraMID/AIL package (also available via FTP and BBS).
  152.  
  153.  
  154. ////// SETUP //////
  155.  
  156. Run the SETUP program in the DOOM directory and select the UltraSound for
  157. both sfx and music.  Now run DOOM!
  158.  
  159.  
  160. ////// BUGS //////
  161.  
  162. NOTE: DOOM v1.2 is known to occasionally lockup with GUS support.
  163.  
  164. If you experience frequent lockups AND are using a high GF1 IRQ
  165. (10,11,12,15), try using a low IRQ (less than 8).
  166.  
  167. If you experience frequent lockups AND have less than 1024K of
  168. GUS RAM, try upgrading to 1024K (1 Megabyte).
  169.  
  170.  
  171. ////// OPTIMIZING //////
  172.  
  173. ========================================================================
  174. Title                   : GUS1M.WAD
  175. Author                  : Tom Klok
  176. Email Address           : a344@mindlink.bc.ca, a00344@giant.rsoft.bc.ca
  177.  
  178. Description             : An optimized MIDI instrument mapping for
  179.                           Gravis Ultrasound cards with 1024K on board.
  180.  
  181. NOTE!  If you don't have a GUS with 1024K, this wad will gain you
  182.        nothing (but shouldn't hurt anything either).
  183.        This PWAD contains no new MUS music files or sounds whatsoever.
  184.        Nor does it require any new .PAT files, just those supplied
  185.        with the more recent install disks.
  186. ========================================================================
  187.  
  188. Information
  189. ~~~~~~~~~~~
  190.      As you probably know, Doom's wad file contains a resource named
  191. DMXGUS which contains a list of all MIDI instruments (patch file
  192. names) and a table specifying which instruments to load into card
  193. memory. Since all 190+ instruments can't be loaded at once, the DMXGUS
  194. file loads a subset of the full GM set and then maps the remaining
  195. instrument numbers to the loaded instruments.
  196.  
  197.      I was curious about the internal format of MUS files, and pretty
  198. happy when the MIDI2MUS utility was released.  Thanks, guys!  Mu