home *** CD-ROM | disk | FTP | other *** search
/ CD Shareware Masterblend / cdsharewaremasterblend.iso / fbucks / install.doc < prev    next >
Text File  |  1989-08-24  |  9KB  |  228 lines

  1.                       FastBucks INSTALL Documentation
  2.                     -----------------------------------
  3.  
  4.  
  5. System Requirements:
  6.                      Memory : 196K Free user RAM
  7.                      Storage: a minimum of 2 360K floppy drives
  8.                               although a Hard disk is strongly recommended.
  9.  
  10.                      Monitor: MDA,CGA,EGA,PGA and just about anything else
  11.                               I've forgotten.
  12.  
  13.                      CPU    : 100% compatible IBM XT/AT or 386
  14.  
  15.                      DOS    : DOS version 2.0 of higher.
  16.  
  17.                     CONFIG.SYS FILE MUST CONTAIN THE STATEMENTS
  18.  
  19.                     FILES=20
  20.                     BUFFERS=20
  21.  
  22.                     THIS FILE MUST BE ON YOUR SYSTEM "BOOT" DISK WHEN
  23.                     YOUR COMPUTER IS BOOTED UP.
  24.  
  25.                     OTHERWISE FastBucks will refuse to run.
  26.  
  27.     Note: A utility program  FBFILES.EXE has  been provided  on this  disk to
  28. create a CONFIG.SYS file  on your  DOS boot  disk if  you don't  have one,and
  29. modify your files= statement if it has less than 20 files allocated.  If more
  30. than 20 files have been allocated to your system FBFILES will not change your
  31. Files= Statememt.   If no files  statement exists, one will  be added to your
  32. CONFIG.SYS file.
  33.  
  34. To use FBFILES.EXE:
  35.  
  36. Place the Sample data/Documantation diskette into drive a:
  37. Type:  a:Fbfiles <return>
  38.  
  39. Re-Boot your system with your new Config.sys file.
  40.  
  41.  
  42. Now proceed with the program installation process.
  43.  
  44. Installing FastBucks on a two floppy drive system:
  45. ===============================================================================
  46.  
  47. ************************************************************
  48. ***                                                     ****
  49. *** WARNING MAKE SURE YOUR SYSTEM HAS BEEN BOOTED WITH  ****
  50. *** FILES = 20 AND BUFFERS = 20 IN YOUR CONFIG.SYS FILE ****
  51. *** BEFORE RUNNING INSTALL                              ****
  52. ***                                                     ****
  53. ***        (You may use FBFILES.EXE to do this)         ****
  54. ***                                                     ****
  55. ************************************************************
  56.  
  57.  
  58. ------------------------ 
  59. First time Installation:
  60. ------------------------
  61.  
  62.      Format  Two floppy diskettes
  63.      Label the first diskette "FastBucks Program".
  64.      Label the second diskette FastBucks Data.
  65.  
  66.      Insert the Program/Install diskette into Drive A:
  67.      Type a: <return>
  68.      Type Install <return>
  69.  
  70.      Carefully follow the prompts the install program gives you.
  71.  
  72.      If you don't want the sample data installed onto your system
  73.      answer "N" when the install program asks you about them.
  74.      It will then skip copying your data files to drive B: and
  75.      initialize it for "zero" accounts.
  76.  
  77. Note:
  78.      It takes the install program a fairly long time to copy the sample
  79.      data files to drive b:. As long as "both" disk drives are flashing
  80.      don't be concerned. The program is "not" hung up. Just relax and get
  81.      a cup of coffee.
  82.  
  83. ----------------------------------------------------------------------------
  84. Users that have been using earlier versions of FastBucks 3.10 - 3.18
  85. ----------------------------------------------------------------------------
  86.  
  87. ************************************************************
  88. ***                                                     ****
  89. *** WARNING MAKE SURE YOUR SYSTEM HAS BEEN BOOTED WITH  ****
  90. *** FILES = 20 AND BUFFERS = 20 IN YOUR CONFIG.SYS FILE ****
  91. *** BEFORE RUNNING INSTALL                              ****
  92. ***                                                     ****
  93. ***        (You may use FBFILES.EXE to do this)         ****
  94. ***                                                     ****
  95. ************************************************************
  96.  
  97.      Format two Floppy diskettes.
  98.      
  99.     If you have been  using FastBucks  on a  single drive  system you  are no
  100. longer allowed to do so: The program has grown so large that there is no room
  101. left on the diskette for data files.
  102.  
  103.     For the same reason the FastBucks program disk CANNOT be formatted as a
  104. "Bootable"  system disk.  There  just isn't enough room on the disk for the 
  105. operating system and FastBucks program.
  106.  
  107.      
  108.      Copy The following files from your old FastBucks 3.18 program disk
  109. to one of the blank diskettes.
  110.     
  111.     Fb.dta
  112.     FB.Com
  113.     Fbconf.dat
  114.  
  115.     The easiest way to do this is to place your old program disk into drive
  116. a: and the blank diskette into drive b:
  117.  
  118. Type Copy a:fbconf.dat  b: <return>
  119. Type Copy a:fb.com b: <return>
  120. Type Copy a:fb.dta b: <return>
  121.  
  122.  
  123. remove the diskette in drive a: and place it in a safe place: You won't be
  124. needing it again.
  125.  
  126. remove the diskette in drive b: and label it "FastBucks Program".
  127.  
  128. Label the second Blank diskette "FastBucks Data".         
  129.  
  130. it is not necessary to copy anything to this diskette:
  131.  
  132.    Install the Program/Install diskette into drive a:
  133.    Type a: <return>
  134.    Type Install <return>
  135.  
  136.     Carefully read and follow the prompts that Install gives you.It will read
  137. your  program diskette and decide whether it needs to convert your data files
  138. to  the New FastBucks 4.0 data structure.   it will then prompt you to insert
  139. your  original data diskette into drive a:  and the blank diskette into drive
  140. b: the  converted data files will be placed  onto drive b: and the "original"
  141. data files will remain untouched.
  142.  
  143. =======================================================================
  144. HARD DISK USERS:
  145. =======================================================================
  146.  
  147. ************************************************************
  148. ***                                                     ****
  149. *** WARNING MAKE SURE YOUR SYSTEM HAS BEEN BOOTED WITH  ****
  150. *** FILES = 20 AND BUFFERS = 20 IN YOUR CONFIG.SYS FILE ****
  151. *** BEFORE RUNNING INSTALL                              ****
  152. ***                                                     ****
  153. ***        (You may use FBFILES.EXE to do this)         ****
  154. ***                                                     ****
  155. ************************************************************
  156.  
  157. ---------------------------
  158. First Time Installation:
  159. ---------------------------
  160. Insert the Program/Install diskette into drive A:
  161.  
  162. Type a: <return>
  163.  
  164.     Carefully follow the prompts that the install program gives you.  Install
  165. will create a  directory <drive>:\Fbucks if  you respond with  the same drive
  166. designation for <drive> for your data files a subdirectory will be created as
  167. <drive>:\FBucks\FBdata all  of  your  data  files  will  be  placed  in  this
  168. subdirectory.
  169.  
  170.     If  you don't want the sample data  installed onto your system answer "N"
  171. when the install program asks you about them.  It will then skip copying your
  172. data files to your data directory and initialize it for "zero" accounts.
  173.  
  174. -----------------------------------------------------------------------------
  175. Users that have been using earlier versions of FastBucks 3.10 - 3.18
  176. -----------------------------------------------------------------------------
  177. ************************************************************
  178. ***                                                     ****
  179. *** WARNING MAKE SURE YOUR SYSTEM HAS BEEN BOOTED WITH  ****
  180. *** FILES = 20 AND BUFFERS = 20 IN YOUR CONFIG.SYS FILE ****
  181. *** BEFORE RUNNING INSTALL                              ****
  182. ***                                                     ****
  183. ***        (You may use FBFILES.EXE to do this)         ****
  184. ***                                                     ****
  185. ************************************************************
  186.  
  187.     If you have been storing your data on a Floppy drive:
  188.  
  189.     Format a fresh diskette and label it FastBucks Data.
  190.  
  191.     Your  Program files for FastBucks 3.10-3.18  "MUST" reside in a directory
  192. named <drive>:\Fbucks.
  193.  
  194.     If you have  been saving  your data  on your  "hard disk"  your data files
  195. "MUST" reside in a directory <drive>:\Fbucks\Data.
  196.  
  197.     Install looks  for your program fil