home *** CD-ROM | disk | FTP | other *** search
/ CD Shareware Masterblend / cdsharewaremasterblend.iso / dtp / outline / readme.1 < prev    next >
Text File  |  1987-11-24  |  15KB  |  319 lines

  1.                        PC-Outline  Version 3.34
  2.         Copyright (C) 1986,87 Brown Bag Software, All Rights Reserved
  3.  
  4. These are the files on this disk (Archive):
  5.  
  6. PCO.EXE      - executable file for running PC-Outline
  7. PCO.ECT      - shareware screen file
  8. README.1     - the latest notes about PC-Outline not included in the manual
  9. README.2     - descriptions of the utility programs included on the disk
  10.  
  11. GLOBAL.COM   - utility program #1 (see README.2)
  12. CPY.COM      - utility program #2 (see README.2)
  13. DIRS.COM     - utility program #3 (see README.2)
  14. MOVE.COM     - utility program #4 (see README.2)
  15. MEM.COM      - utility program #5 (see README.2)
  16. BEEP.COM     - utility program #6 (see README.2)
  17. PUSHDIR.COM  - utility program #7 (see README.2)
  18. POPDIR.COM   - utility program #8 (see README.2)
  19. MTCONV.EXE   - utility progran #9 (see README.2)
  20.  
  21. MANUAL.DOC   - brief documentation in printable form
  22. PRINTDOC.BAT - a batch file that will print MANUAL.DOC to LPT1
  23.  
  24. PCPRINT.COM  - a program for changing printer drivers
  25. KEYSET.COM   - a program for customizing the PC-Outline invoke key
  26.  
  27. *.PCO        - sample outlines covering many of PC-Outline's features.
  28. *.CFG        - various printer drivers
  29.  
  30. GOODCLK.COM  - a program to make the time display in PC-Outline work
  31.                correctly on some compatibles (AT&T, EPSON, and others).
  32.                To use it, just run it in your autoexec.bat file (or any
  33.                time before loading PC-Outline).
  34.  
  35. Last minute notes about PC-Outline:
  36.  
  37. A couple of the most recently added features of PC-Outline are as follows:
  38.  
  39. 1)   NEW WAY OF SPECIFYING WHERE THE CONFIGURATION FILE IS FOR USE ON
  40.      A HARD DISK:  Instead of using the /l=<configuration file/path
  41.      name> as a command parameter option, you may put the command
  42.      SET PCO=<configuration file/path name> in your autoexec.bat
  43.      file.  PC-Outline will first look in the current directory for
  44.      the configuration file PCO.CFG.  If it is not found there and
  45.      there was no /l=.....  command parameter, then PC-Outline will
  46.      try the file/path set in the environment with the dos SET
  47.      command.  By using this feature, you can start PC-Outline from
  48.      anywhere on your hard disk simply by pathing to the directory
  49.      that contains PCO.EXE.  PC-Outline will do the rest of the work,
  50.      automatically finding its configuration files.
  51.  
  52. 2)   NEW /d COMMAND PARAMETER FOR CONTROLLING THE STARTING CURRENT
  53.      DIRECTORY IN PC-Outline:  The configuration file PCO.CFG
  54.      (created from the ADVANCED CONFIGURATION menu) can contain a
  55.      starting directory.  If it does, then each time PC-Outline
  56.      starts it will automatically start with that directory as the
  57.      current directory for outline files.  If it does not contain a
  58.      starting directory, (the entry in the ADVANCED CONFIGURATION
  59.      menu for starting directory is blank), then PC-Outline will use
  60.      the current DOS directory as its starting directory.  If you set
  61.      a current directory in the above menu because you keep most of
  62.      your outline files in one particular location, but sometimes you
  63.      want to start up PC-Outline with a different directory, then you
  64.      can log to the directory you want and type PCO.EXE /d.  The /d
  65.      will tell PC-Outline to ignore the starting directory set in the
  66.      configuration file and use the DOS current directory.
  67.  
  68. 3)   PC-Outline now supports the creation of a printer substitution table
  69.      allowing you to print graphics characters on some printers.  Note:
  70.      Graphics characters will print exactly as seen on the screen on an
  71.      IBM printer.  On epson printers and most other printers, however, you
  72.      must do a little extra work to get some graphics characters to print
  73.      correctly.
  74.  
  75.      For example, if you choose bullet numbering for your outlines, an
  76.      epson printer will not correctly print the bullet.  To fix this,
  77.      create an ascii file named PCOPRN$.CFG and place the following line
  78.      in it (this file exists on the PC-Outline system disk):
  79.  
  80.      char(254)=143
  81.  
  82.      The bullet character on screen is 254 and the epson printer character
  83.      for a bullet is 143.  This command tells PC-Outline that whenever it
  84.      is about to print a character 254, print a 143 instead.  You can
  85.      place as many printer substitutions as you like.  The string to
  86.      substitute can be more than one character if desired.  For example
  87.      you could redefine the tilde character (~) to turn boldface on (for
  88.      an epson printer) by inserting the following line.
  89.  
  90.      char('~')=27,'E'
  91.  
  92.      This would substitute ESC G for every occurence of a tilde character.
  93.  
  94.      Note that there are two ways to insert a value, by placing a
  95.      character in single quotes ('D') or by entering the decimal
  96.      representation for the ascii value of the character (123).  Each
  97.      entry must be separated by a comma.  Following are some valid
  98.      entries:
  99.  
  100.      char(132)='a'
  101.      char('f')='ABC',32
  102.      char(34)=255,'abc',27,'G'
  103.  
  104.      Any line in the file that begins with a semicolon will be ignored
  105.      (useful for inserting comments).  Lines in the substitution file may
  106.      be no longer than 80 characters.  To continue a line on the next
  107.      line, end the line with a plus sign.  For example:
  108.  
  109.      char('~')='ABCEFGHIJKLMNOP',+
  110.      'QRSTUVWXYZ'
  111.  
  112.      This command would print the entire alphabet everytime the tilde
  113.      ('~') was encountered in a file.
  114.  
  115.      PC-Outline will look for the file PCOPRN$.CFG in the same directory
  116.      as the configuration file.  If you have not used either the
  117.      l=<filename> command parameter or the SET PCO=<filename> command to
  118.      specify where the configuration file is located, then PC-Outline will
  119.      just look for PCOPRN$.CFG in the current directory.
  120.  
  121.  
  122. ITEMS ADDED TO PC-Outline SINCE THE DOCUMENTATION RELEASE.
  123. ----------------------------------------------------------
  124.  
  125. ADDED IN VERSION 1.02:
  126.  
  127. 1)   DE-INSTALL - While using PC-Outline in memory resident mode, you may
  128.      deinstall it from memory by pressing Control-Backspace three times in
  129.      a row from the main editing mode.  If there were no memory resident
  130.      programs loaded after PC-Outline, you will recover all the memory
  131.      that PC-Outline was allocated.  If you load any memory resident
  132.      programs after PC-Outline, the memory PC-Outline occupied will be
  133.      freed, but it will not be available for dos to use to run other
  134.      programs in.
  135.  
  136.      Note:     ONLY USE THE DEINSTALL COMMAND AFTER INVOKING PC-Outline
  137.                FROM THE DOS PROMPT AND ONLY AFTER YOU HAVE SAVED ALL OF
  138.                YOUR OUTLINES.  YOU MUST BE IN THE MAIN EDITING MODE OF
  139.                PC-Outline FOR THE DEINSTALL TO WORK (not the opening
  140.                menu).
  141.  
  142. ADDED IN VERSION 1.03:
  143.  
  144. 1)   The "Lose Changes" prompt now looks at all open windows.  It used to
  145.      only look at changes in the current window.
  146.  
  147. 2)   With the /K command parameter option you can force PC-Outline to take
  148.      its keys directly from the keyboard buffer without going through
  149.      BIOS.  This allows you to bypass keyboard enhancers.
  150.  
  151.      MAIN USE:  If you have a whole bunch of keys redefined for your word
  152.      processor and you don't want those key definitions for PC-Outline,
  153.      you can use the /K option and the keyboard enhancer will be active in
  154.      your main program, but not when you invoke PC-Outline.  When you
  155.      return back to your word processor, the keyboard enhancer will
  156.      automatically be active again.  It is likely you will only find use
  157.      for this option when using PC-Outline in its memory resident mode.
  158.  
  159.      For those of you following the progression of versions, all
  160.      non-memory resident versions get their keys through BIOS.  For the
  161.      memory resident version, 1.00 and 1.01 got keys directly from
  162.      keyboard buffer, 1.02 got keys through BIOS and 1.03 gives you the
  163.      choice with /K (default through BIOS).
  164.  
  165. ADDED IN VERSION 1.04:
  166.  
  167. 1)   A few small changes to make 1.03 work how it was supposed to.
  168.  
  169. ADDED