home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
CD-ROM Aktiv 3
/
AKTIEF1_1997.iso
/
toonstru
/
readme.txt
< prev
next >
Wrap
Text File
|
1996-08-22
|
12KB
|
298 lines
ToonStruck Demo Release Notes
-----------------------------
These release notes are intended to provide last minute information regarding
the ToonStruck cover disk demo. If you are having trouble getting ToonStruck
to run on your system, please read the troubleshooting section below.
Installation
------------
Insert the demo CD into your CD-ROM drive. Change to the ToonStruck directory
on the CD and type 'install' then follow the onscreen instructions. When the
demo is installed, change to the install directory on your hard drive and type
'toonstrk'. If you are running from Windows '95 select 'Run' from the 'Start'
menu and select 'install.exe' in the ToonStruck directory on the CD. When the
installation is complete select 'Run' from the 'Start' menu and select
'toonstrk.bat'.
Recommended Requirements
------------------------
PC IBM(clone) Pentium
16Mb RAM
1Mb SVGA Video Card ( VLB / PCI )
4x CD-ROM Drive
16bit Stereo Sound Card
Minimum Requirements
--------------------
PC IBM(clone) 486
8Mb RAM
256k SVGA Video Card ( VLB / PCI )
2x CD-ROM Drive
8bit Sound Card
------------------------------------------------------------------------------
Gameplay Instructions
---------------------
Cursor Controls
---------------
When cursor is a diagonal arrow pointer:
Left or right click to move Drew to that point in the scene
When cursor is a pointing hand (over exits, paths, doors etc.):
Left click to walk towards exit and leave scene, right click to leave scene
immediately
When cursor is a magnifying glass:
Left or right click to get (where appropriate) a description of whatever the
cursor is over.
When cursor is a tapping hand:
Left click to 'push', 'press' or 'activate', & right click to get (where
appropriate) a description of, whatever the cursor is over (you'll hear a
silly noise if there is no description available).
When cursor is an opening and closing hand:
Left click to 'use', & right click to get (where appropriate) a description
of, whatever the cursor is over (you'll hear a silly noise if there is no
description available).
When cursor is chattering teeth:
Left click to talk to, & right click to get a description of, the character
the cursor is over.
When cursor is a 'picking up' hand:
Left click to pick up (cursor turns into that object), & right click to get
(where appropriate) a description of, whatever the cursor is over (you'll hear
a silly noise if there is no description available).
Using Objects
-------------
Having picked up an object, left click to 'use' that object in the current
scene (must be over the area of the scene where you want to use the object).
Alternatively, move the cursor over the inventory bag (see below) and left
click to place the object in your inventory (short cut: while the cursor is an
object, right click at any time to instantly place object in inventory bag).
Storing Objects
---------------
Bottom left of the screen is a small blue bag. Left or right click on the bag
to bring up a close-up of its contents. This close-up serves as the inventory
screen where useful objects may be stored for future use. Right click over any
object in the inventory screen to get a description of that object. Left click
on an object to pick it up, the cursor will become that object. Left click
over an empty slot to return the object to the bag. Whilst holding an object
left click away from another item or slot to return to the main scene still
'carrying' the object (as the cursor).
Flux Wildly
-----------
Flux is the purple guy following you around the game. Left click on Flux to
turn the cursor into a 'Flux Head'. In some places you can left click the Flux
Head cursor to trigger additional dialog. Left click over Flux or right click
anywhere to return to normal cursor.
Other controls
--------------
Press F1 to bring up the Options screen. Here you will be able to:
1. Independently control the volume levels of the music, sound effects and
dialog in the game.
2. Leave the demo (quit to DOS or Windows).
3. Return to the game.
Note that the video resolution control and 'save/load' game functions have
been disabled for this demo.
Press 'spacebar' to 'fast forward' past the current line of dialog.
------------------------------------------------------------------------------
Troubleshooting
---------------
This section provides troubleshooting techniques to get the demo running and
achieve optimum game performance.
Configuration
-------------
If you need to alter the settings for your video card after installation, run
VIDSETUP.EXE from your ToonStruck directory. If you need to change the
settings for your sound card, run 'SETUP.EXE' from your ToonStruck directory.
It is possible to manually configure many of the settings within ToonStruck
in order to overcome a problem. Before trying any of these please read the
'problems & solutions' section below. The use of these switches should not
be necessary if the install program was followed correctly.
Command Line Switches (override 'TOONSTRK.CFG'):
Usage: TOONSTRK [options]
-h Help
-? Help
-u Disable UniVBE
-v Install UniVBE using existing VESA 2.0 Drivers
-w Do not sync to monitor refresh
-6 Force 6-bit DAC palette data
-p Do not program the palette (colors)
Most of the configuration information is obtained from the 'TOONSTRK.CFG'
file. You may change video modes by setting the 'Width' and 'Height' fields
within this file using a text editor. Supported resolution are: 640x400
640x480 320x200.
UniVBE
------
UniVBE is a generic video BIOS extender compatible with VESA 2.0. It enables
quick, linear access to your video cards memory. For ToonStruck to run
optimally either UniVBE has to be installed correctly or you have to be using
a VESA 2.0 video driver supplied by the manufacturer of your video card.
UniVBE is constantly being revised and upgraded as more and more video cards
become available. If you have problems installing UniVBE, your video card may
not be supported by the version of UniVBE shipped with this demo. For more
information look in the SciTech software web site WWW.SCITECHSOFT.COM. To
obtain a compatible VESA 2.0 driver contact the manufacturer of your video
card.
Windows '95
-----------
To attain optimum performance from ToonStruck we recommend running from
MS-DOS mode. If you have an 8Mb system you may find that ToonStruck will not
run under a DOS box. If you are experiencing low sound volume, or no sound,
make sure the volume control slider, accessible from the taskbar, is turned
up. If you have trouble installing the sound card, make sure the
auto-detection settings in the install program are the same as the Windows '95
settings or simply run from MS-DOS mode. The Windows '95 sound settings are
found in the 'Sound card' properties section under the 'Device Manager' tab
in the 'System' icon of the 'Control Panel'. If you are experiencing poor CD
performance make sure the settings are correct for your CD-ROM drive. These
settings appear under 'Control Panel' - 'System' - 'Performance' -
'File System' - 'CD_Rom'.
Problems & Solutions
--------------------
* The install program did not auto-detect the sound card correctly.
Try manually selecting your sound card settings, if you know them,
from within the installation program or by running the sound setup
program 'SETUP.EXE'. Choose the 'Select Digital' button and enter
your sound card specifics. If you still cannot hear sound you may
need to disable sound altogether for the demo to run. Select
'No Digital Device' from the 'Select Digital' button.
* No sound is heard when 'Test' is selected in the installation program.
See above.
* The machine locks-up after displaying the UVBELib banner.
There is a conflict between UniVBE and one or more programs running
on your