home *** CD-ROM | disk | FTP | other *** search
- 213 Opens a wave editor to edit the selected audio section
- 300 View commands
- 301 View the beginning of the selected section
- 302 View the end of the selected track
- 303 View the end of the selected section
- 304 View the entire project
- 305 View 1 second of the project
- 306 View 10 seconds of the project
- 307 View 1 minute of the project
- 308 View 5 minutes of the project
- 309 View 1 hour of the project
- 310 Shows volume levels within sections
- 311 View marker's position
- 313 Shows waveforms or images in sections when zoomed in
- 314 Sets the zoom level for showing contents
- 316 Shows a grid and snaps dragged units to the grid
- 317 Sets the grid size
- 318 Snaps marker to nearest audio zero-crossing
- 500 Playback commands
- 501 Plays the entire project
- 502 Plays the part shown in the window
- 503 Plays the part shown in the window, starting at the marker
- 504 Plays the part shown in the window, stopping at the marker
- 505 Plays from the marker to then end
- 506 Stops playback
- 507 Combines and saves all digital audio tracks to a single file
- 601 Set playback device and sampling rate
- 603 Set folder locations for different sections
- 604 Register Multiquence
- 2000 Access help
- 2001 Help table of contents
- 2002 Help on using online Help
- 2009 Shows Multiquence version information
- 3000 Options menu
- 3001 Sets options for the selected section
- 3002 Adds a digital audio section to the track
- 3003 Deletes the selected section
- 3004 Mutes the selected section
- 3005 Divides the selected section at marker
- 3006 Trims beginning of selected section up to marker
- 3007 Trims end of selected section after marker
- 3008 Adds another copy of the selected section
- 3021 Adds a MIDI section to the track
- 3022 Adds a CD section to the track
- 3023 Adds a video section to the track
- 3024 Adds a recording section to the track
- 3040 Adds a flange effect to an audio section
- 3041 Adjusts equalization of an audio section
- 3042 Resets volume graph to full for selected section
- 3043 Adjusts the left/right balance of an audio section
- 3044 Adjusts the playback speed/pitch of an audio section
- 3051 Moves the marker to the mouse location
- 3052 Moves the marker to the playback position
- 3055 Set the position of the marker
- 3100 Track commands
- 3101 Creates a new track
- 3103 Adds a section to the track
- 3104 Deletes the entire track
- 3107 Insert space before the selected section
- 3108 Insert silence at the mouse position or before the section
- 10001 Silence
- 10002 Contents Threshold
- 10003 Grid Size
- 10004 Playback Speed
- 10010 &Undo %s Ctrl+Z
- 10011 new track
- 10012 delete track
- 10013 add section
- 10014 delete section
- 10015 move
- 10016 mute
- 10017 split
- 10018 length
- 10019 trim
- 10020 space
- 10021 track up
- 10022 track down
- 10023 speed
- 10100 Supported files|*.wav;*.voc;*.au;*.iff;*.aifc;*.aif;*.aiff;*.mat;*.mid;*.rmi;*.avi|Digital audio files|*.wav;*.voc;*.au;*.iff;*.aifc;*.aif;*.aiff;*.mat|MIDI files|*.mid;*.rmi|Video files|*.avi|All files|*.*|
- 10101 Programs|*.exe;*.com;*.bat;*.pif|All files|*.*|
- 10500 Length
- 10501 Threshold time
- 10502 Grid spacing
- 10503 Speed ratio
- 10580
- 10581 s
- 10582 %
- 10583 ms
- 10584 Hz
- 10600 Gain
- 10601 Center
- 10901 Data Error
- 10902 entry error.\nPlease enter numbers only.
- 10903 Range Error
- 10904 is out of range.\nValid range:
- 10905 entry error.\nPlease enter a floating point number.
- 10906 Time Format Error
- 10907 entry error.\nPlease separate time into hours, minutes, and seconds using colons
- 10908 entry error.\nOnly three numbers may follow the decimal point.
- 10909 entry error.\nDecimal point should only appear after seconds.
- 10910 entry error.\nOnly 2 numbers may appear between colons. Use a '.' after seconds when specifying milliseconds.
- 10911 entry error.\nA value greater than 59 is not allowed for minutes or seconds in the given format.
- 10912 entry error.\nToo many colons have been entered. Make sure you have a '.' instead of a ':' after seconds.
- 10913 entry error.\nPlease enter the time in one of these formats: HH:MM:SS.TTT, MMM:SS.TTT, or SSSSS.TTT
- 11000 'To' time must be later than 'From' time.
- 11001 The length of the recording section could not be changed. Make sure there is enough storage available on your hard drive.
- 11002 Could not open MIDI section. File may be missing.
- 11003 Could not open CD device or device is busy. Check that the CD-ROM drive is working correctly and contains an audio CD.
- 11004 Could not open video section. File may be missing.
- 11006 Could not find a CD-ROM drive.
- 11010 Could not determine length of CD. Check that the CD-ROM drive is working correctly and contains an audio CD.
- 11011 Could not determine number of tracks on CD.
- 11012 No audio tracks found on CD.
- 11013 Could not determine position of track on CD.
- 11020 Delete selected track and all sections?
- 11021 Could not open the wave file.
- 11022 Could not write to the wave file. Make sure there is enough storage available on your hard drive.
- 11023 Section not found.
- 11024 Could not open the file:\n
- 11025 File does not contain a Multiquence project.\nUse 'Track | Add ...' to add a file to a track.
- 11026 File is too short or corrupted.
- 11027 Could not read from file. File is invalid or memory is unavailable.
- 11028 You need a newer version of Multiquence to open this file.
- 11030 Could not create the file:\n
- 11031 Could not write to the file. Make sure there is enough storage available on your hard drive.
- 11040 Not enough storage to recreate recording unit!
- 11041 Not enough storage to undo length change!
- 11045 Please specify a filename.
- 11046 File could not be created. Make sure there is enough storage available on your hard drive.
- 11047 Could not create section.
- 11048 Cannot trim a looped section.
- 11049 Cannot split a looped section.
- 11050 Save changes to project?
- 11051 Section has been modified and will be re-opend from hard drive.
- 11052 Section has been modified and the length has changed. Use 'Options | Section' to make adjustments.
- 11053 Section cannot be opened and may have been deleted.
- 11060 No editor specified. Please use 'Options | Folder' to set the editor.
- 11200 Recording Options
- 11201 MIDI Options
- 11202 CD Options
- 11203 Video Options
- 11210 Delete Track
- 11211 Save As Wave
- 11212 Find Section
- 11213 Open
- 11214 Save
- 11215 Add Section
- 11216 Undo
- 11217 Trim
- 11218 Split
- 11219 Open editor
- 11601 Could not open recording file.
- 11602 Input source for recording could not be selected.
- 11603 Could not write to recording file. Make sure there is enough storage available on your hard drive.
- 11604 Not enough memory to create playback buffers.
- 11605 High resolution timer could not be created.
- 11606 Could not create multimedia callback window.
- 11607 Could not create playback thread.
- 11608 Could not create multimedia thread.
- 11609 Clipping required. Maximum output level was %2.2lf%%.
- 11610 System is not fast enough to process all channels/effects.
- 11611 Not enough memory to associate section with a device.
- 11612 Could not open device for this section.
- 11613 Device returned an ID of 0.
- 11614 Could not prepare media in advance. Synchronization may be affected.
- 11615 Could not open the device. Another section may be using the device.
- 11616 Device would not play this section.
- 11617 Not enough memory to create a recorder.
- 11618 Recording device is busy or is not 'full duplex'. Your sound card must support simultaneous playback and recording in 16-bit stereo.
- 11619 Could not reserve 16-bit stereo device for recording.
- 16000 Finished.
- 16001 A new recording file is being created.
- 16100 Number of channel for this file has changed.
- 16101 File could not be opened.
- 16102 Length of file has changed. Adjustments may be required.
- 16103 Dynamic volume points that are outside the length of the file have been truncated.
- 16104 Position of the last dynamic volume point has been adjusted to match the length of the file.
- 16106 Not enough storage to create the recording file.
- 16107 Input device does not exists on this system. First available device will be used instead.
- 16108 Input source can not be selected. First available input will be used instead.
- 16109 'From' value set to beginning of file due to length change.
- 16110 'To' value adjusted to end of file due to length change.
- 16111 Could not open CD drive. Make sure an audio CD is present.
- 16112 Length of CD is different. Please insert the correct CD for this project.
- 16113 The sampling rate of this recording file is invalid.
- 16114 Original file missing. This file was found in a different folder.
- 16200 Project file is corrupted and cannot be opened.
- 24310 Quits Multiquence and prompts to save the project
- 24320 Edit operations
- 24321 Reverses the last operation
- 24322 Cuts the selection and puts it on the Clipboard
- 24323 Copies the selection and puts it on the Clipboard
- 24324 Inserts the clipboard contents at the insertion point
- 24327 Insert a new line
- 24328 Edit the current line
- 24330 Project operations
- 24331 Creates a new project
- 24332 Opens an existing project
- 24333 Saves this project
- 24334 Saves this project with a new name
- 24351 Finds the specified section
- 24352 Finds the specified text and changes it
- 24353 Finds the next match
- 32530 EXT|CAPS|NUM|SCRL|OVR|REC
- 32531 | | | | |
- 32707 Invalid client window %s
- 32708 Invalid child window %s
- 32709 Invalid window %s
- 32732 Invalid DIB handle %X
- 32733 GDI object %X destroy failure
- 32734 GDI object %X delete failure
- 32735 GDI file read failure
- 32736 GDI resource load failure
- 32737 GDI creation failure
- 32738 GDI allocate failure
- 32739 GDI failure
- 32740 Invalid relative window specified in layout constraint in window %s
- 32741 Incomplete layout constraints specified in window %s
- 32742 Printer error
- 32743 Validator syntax error
- 32744 Menu creation failure
- 32745 Child create fail for window %s
- 32746 Execute fail for window %s
- 32747 Create fail for window %s
- 32748 Child class registration fail for window %s
- 32749 Class registration fail for window %s
- 32758 VBX Library init failure
- 32759 Invalid MainWindow
- 32760 Invalid module specified for window
- 32761 Out of memory
- 32762 No application object
- 32763 Unknown error
- 32764 Unhandled Exception
- 32765 OK to resume?
- 32766 ObjectWindows Exception
- 32767 Unknown exception
- 61440 Changes the size of the window
- 61456 Moves the window to another position
- 61472 Reduces the window to an icon
- 61488 Enlarges the window to it maximum size
- 61504 Switches to next window
- 61536 Closes the window
- 61728 Restores the window to its previous size
- 61744 Opens task list
-