Labels:text | diagram | parallel | line | rectangle | design OCR: ROOF BEAM INSTALLATION FIRST CUT THE BEAMS TO SIZE. LINED UP. THEN USE "C" CLAMPS TO GET THEM OF VALL BEAMS. DO THIS ONE AT A TIME AND NAIL THEM TO EACH SET DRILL THROUGH WALL AND ROOF BEAM AND INSTALL THE BOLTS, NUTS AND VASHERS. LEAVE THE BRACES IN PLACE UNTIL THE END VALLS ARE INSTALLED IN A LATER STEP. BE SURE EACH ROOF BEAM IS ON THE CORRECT SIDE OF EACH WALL BEAM SET AS SHOWN BELOW. THE 4 BOLTS ON THE CORNERS WILL NEED TO HAVE THE HEADS COUNTERSUNK ON THE OUTSIDE WALL BEAM FACES,
(.png)
