Fresh Fish 9/FreshFishVol9-CD2.bin/bbs/gnu/gdb-4.14-src.lha/gdb-4.14/gdb/dwarfread.c

C/C++ Source or Header | 1994-12-17 | 107.3 KB | 3,889 lines

/* DWARF debugging format support for GDB.
   Copyright (C) 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
   Written by Fred Fish at Cygnus Support.  Portions based on dbxread.c,
   mipsread.c, coffread.c, and dwarfread.c from a Data General SVR4 gdb port.

This file is part of GDB.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */

/*

FIXME: Do we need to generate dependencies in partial symtabs?
(Perhaps we don't need to).

FIXME: Resolve minor differences between what information we put in the
partial symbol table and what dbxread puts in.  For example, we don't yet
put enum constants there.  And dbxread seems to invent a lot of typedefs
we never see.  Use the new printpsym command to see the partial symbol table
contents.

FIXME: Figure out a better way to tell gdb about the name of the function
contain the user's entry point (I.E. main())

FIXME: See other FIXME's and "ifdef 0" scattered throughout the code for
other things to work on, if you get bored. :-)

*/

#include "defs.h"
#include "symtab.h"
#include "gdbtypes.h"
#include "symfile.h"
#include "objfiles.h"
#include "elf/dwarf.h"
#include "buildsym.h"
#include "demangle.h"
#include "expression.h"    /* Needed for enum exp_opcode in language.h, sigh... */
#include "language.h"
#include "complaints.h"

#include <fcntl.h>
#include <string.h>

#ifndef    NO_SYS_FILE
#include <sys/file.h>
#endif

/* FIXME -- convert this to SEEK_SET a la POSIX, move to config files.  */
#ifndef L_SET
#define L_SET 0
#endif

/* Some macros to provide DIE info for complaints. */

#define DIE_ID (curdie!=NULL ? curdie->die_ref : 0)
#define DIE_NAME (curdie!=NULL && curdie->at_name!=NULL) ? curdie->at_name : ""

/* Complaints that can be issued during DWARF debug info reading. */

struct complaint no_bfd_get_N =
{
  "DIE @ 0x%x \"%s\", no bfd support for %d byte data object", 0, 0
};

struct complaint malformed_die =
{
  "DIE @ 0x%x \"%s\", malformed DIE, bad length (%d bytes)", 0, 0
};

struct complaint bad_die_ref =
{
  "DIE @ 0x%x \"%s\", reference to DIE (0x%x) outside compilation unit", 0, 0
};

struct complaint unknown_attribute_form =
{
  "DIE @ 0x%x \"%s\", unknown attribute form (0x%x)", 0, 0
};

struct complaint unknown_attribute_length =
{
  "DIE @ 0x%x \"%s\", unknown attribute length, skipped remaining attributes", 0, 0
};

struct complaint unexpected_fund_type =
{
  "DIE @ 0x%x \"%s\", unexpected fundamental type 0x%x", 0, 0
};

struct complaint unknown_type_modifier =
{
  "DIE @ 0x%x \"%s\", unknown type modifier %u", 0, 0
};

struct complaint volatile_ignored =
{
  "DIE @ 0x%x \"%s\", type modifier 'volatile' ignored", 0, 0
};

struct complaint const_ignored =
{
  "DIE @ 0x%x \"%s\", type modifier 'const' ignored", 0, 0
};

struct complaint botched_modified_type =
{
  "DIE @ 0x%x \"%s\", botched modified type decoding (mtype 0x%x)", 0, 0
};

struct complaint op_deref2 =
{
  "DIE @ 0x%x \"%s\", OP_DEREF2 address 0x%x not handled", 0, 0
};

struct complaint op_deref4 =
{
  "DIE @ 0x%x \"%s\", OP_DEREF4 address 0x%x not handled", 0, 0
};

struct complaint basereg_not_handled =
{
  "DIE @ 0x%x \"%s\", BASEREG %d not handled", 0, 0
};

struct complaint dup_user_type_allocation =
{
  "DIE @ 0x%x \"%s\", internal error: duplicate user type allocation", 0, 0
};

struct complaint dup_user_type_definition =
{
  "DIE @ 0x%x \"%s\", internal error: duplicate user type definition", 0, 0
};

struct complaint missing_tag =
{
  "DIE @ 0x%x \"%s\", missing class, structure, or union tag", 0, 0
};

struct complaint bad_array_element_type =
{
  "DIE @ 0x%x \"%s\", bad array element type attribute 0x%x", 0, 0
};

struct complaint subscript_data_items =
{
  "DIE @ 0x%x \"%s\", can't decode subscript data items", 0, 0
};

struct complaint unhandled_array_subscript_format =
{
  "DIE @ 0x%x \"%s\", array subscript format 0x%x not handled yet", 0, 0
};

struct complaint unknown_array_subscript_format =
{
  "DIE @ 0x%x \"%s\", unknown array subscript format %x", 0, 0
};

struct complaint not_row_major =
{
  "DIE @ 0x%x \"%s\", array not row major; not handled correctly", 0, 0
};

typedef unsigned int DIE_REF;    /* Reference to a DIE */

#ifndef GCC_PRODUCER
#define GCC_PRODUCER "GNU C "
#endif

#ifndef GPLUS_PRODUCER
#define GPLUS_PRODUCER "GNU C++ "
#endif

#ifndef LCC_PRODUCER
#define LCC_PRODUCER "NCR C/C++"
#endif

#ifndef CHILL_PRODUCER
#define CHILL_PRODUCER "GNU Chill "
#endif

/* Provide a default mapping from a DWARF register number to a gdb REGNUM.  */
#ifndef DWARF_REG_TO_REGNUM
#define DWARF_REG_TO_REGNUM(num) (num)
#endif

/* Flags to target_to_host() that tell whether or not the data object is
   expected to be signed.  Used, for example, when fetching a signed
   integer in the target environment which is used as a signed integer
   in the host environment, and the two environments have different sized
   ints.  In this case, *somebody* has to sign extend the smaller sized
   int. */

#define GET_UNSIGNED    0    /* No sign extension required */
#define GET_SIGNED    1    /* Sign extension required */

/* Defines for things which are specified in the document "DWARF Debugging
   Information Format" published by UNIX International, Programming Languages
   SIG.  These defines are based on revision 1.0.0, Jan 20, 1992. */

#define SIZEOF_DIE_LENGTH    4
#define SIZEOF_DIE_TAG        2
#define SIZEOF_ATTRIBUTE    2
#define SIZEOF_FORMAT_SPECIFIER    1
#define SIZEOF_FMT_FT        2
#define SIZEOF_LINETBL_LENGTH    4
#define SIZEOF_LINETBL_LINENO    4
#define SIZEOF_LINETBL_STMT    2
#define SIZEOF_LINETBL_DELTA    4
#define SIZEOF_LOC_ATOM_CODE    1

#define FORM_FROM_ATTR(attr)    ((attr) & 0xF)    /* Implicitly specified */

/* Macros that return the sizes of various types of data in the target
   environment.

   FIXME:  Currently these are just compile time constants (as they are in
   other parts of gdb as well).  They need to be able to get the right size
   either from the bfd or possibly from the DWARF info.  It would be nice if
   the DWARF producer inserted DIES that describe the fundamental types in
   the target environment into the DWARF info, similar to the way dbx stabs
   producers produce information about their fundamental types. */

#define TARGET_FT_POINTER_SIZE(objfile)    (TARGET_PTR_BIT / TARGET_CHAR_BIT)
#define TARGET_FT_LONG_SIZE(objfile)    (TARGET_LONG_BIT / TARGET_CHAR_BIT)

/* The Amiga SVR4 header file <dwarf.h> defines AT_element_list as a
   FORM_BLOCK2, and this is the value emitted by the AT&T compiler.
   However, the Issue 2 DWARF specification from AT&T defines it as
   a FORM_BLOCK4, as does the latest specification from UI/PLSIG.
   For backwards compatibility with the AT&T compiler produced executables
   we define AT_short_element_list for this variant. */

#define    AT_short_element_list     (0x00f0|FORM_BLOCK2)

/* External variables referenced. */

extern int info_verbose;        /* From main.c; nonzero => verbose */
extern char *warning_pre_print;        /* From utils.c */

/* The DWARF debugging information consists of two major pieces,
   one is a block of DWARF Information Entries (DIE's) and the other
   is a line number table.  The "struct dieinfo" structure contains
   the information for a single DIE, the one currently being processed.

   In order to make it easier to randomly access the attribute fields
   of the current DIE, which are specifically unordered within the DIE,
   each DIE is scanned and an instance of the "struct dieinfo"
   structure is initialized.

   Initialization is done in two levels.  The first, done by basicdieinfo(),
   just initializes those fields that are vital to deciding whether or not
   to use this DIE, how to skip past it, etc.  The second, done by the
   function completedieinfo(), fills in the rest of the information.

   Attributes which have block forms are not interpreted at the time
   the DIE is scanned, instead we just save pointers to the start
   of their value fields.

   Some fields have a flag <name>_p that is set when the value of the
   field is valid (I.E. we found a matching attribute in the DIE).  Since
   we may want to test for the presence of some attributes in the DIE,
   such as AT_low_pc, without restricting the values of the field,
   we need someway to note that we found such an attribute.

 */

typedef char BLOCK;

struct dieinfo {
  char *        die;        /* Pointer to the raw DIE data */
  unsigned long     die_length;    /* Length of the raw DIE data */
  DIE_REF        die_ref;    /* Offset of this DIE */
  unsigned short    die_tag;    /* Tag for this DIE */
  unsigned long        at_padding;
  unsigned long        at_sibling;
  BLOCK *        at_location;
  char *        at_name;
  unsigned short    at_fund_type;
  BLOCK *        at_mod_fund_type;
  unsigned long        at_user_def_type;
  BLOCK *        at_mod_u_d_type;
  unsigned short    at_ordering;
  BLOCK *        at_subscr_data;
  unsigned long        at_byte_size;
  unsigned short    at_bit_offset;
  unsigned long        at_bit_size;
  BLOCK *        at_element_list;
  unsigned long        at_stmt_list;
  unsigned long        at_low_pc;
  unsigned long        at_high_pc;
  unsigned long        at_language;
  unsigned long        at_member;
  unsigned long        at_discr;
  BLOCK *        at_discr_value;
  BLOCK *        at_string_length;
  char *        at_comp_dir;
  char *        at_producer;
  unsigned long        at_start_scope;
  unsigned long        at_stride_size;
  unsigned long        at_src_info;
  char *        at_prototyped;
  unsigned int        has_at_low_pc:1;
  unsigned int        has_at_stmt_list:1;
  unsigned int        has_at_byte_size:1;
  unsigned int        short_element_list:1;
};

static int diecount;    /* Approximate count of dies for compilation unit */
static struct dieinfo *curdie;    /* For warnings and such */

static char *dbbase;    /* Base pointer to dwarf info */
static int dbsize;    /* Size of dwarf info in bytes */
static int dbroff;    /* Relative offset from start of .debug section */
static char *lnbase;    /* Base pointer to line section */
static int isreg;    /* Kludge to identify register variables */
/* Kludge to identify basereg references.  Nonzero if we have an offset
   relative to a basereg.  */
static int offreg;
/* Which base register is it relative to?  */
static int basereg;

/* This value is added to each symbol value.  FIXME:  Generalize to
   the section_offsets structure used by dbxread (once this is done,
   pass the appropriate section number to end_symtab).  */
static CORE_ADDR baseaddr;    /* Add to each symbol value */

/* The section offsets used in the current psymtab or symtab.  FIXME,
   only used to pass one value (baseaddr) at the moment.  */
static struct section_offsets *base_section_offsets;

/* Each partial symbol table entry contains a pointer to private data for the
   read_symtab() function to use when expanding a partial symbol table entry
   to a full symbol table entry.  For DWARF debugging info, this data is
   contained in the following structure and macros are provided for easy
   access to the members given a pointer to a partial symbol table entry.

   dbfoff    Always the absolute file offset to the start of the ".debug"
        section for the file containing the DIE's being accessed.

   dbroff    Relative offset from the start of the ".debug" access to the
        first DIE to be accessed.  When building the partial symbol
        table, this value will be zero since we are accessing the
        entire ".debug" section.  When expanding a partial symbol
        table entry, this value will be the offset to the first
        DIE for the compilation unit containing the symbol that
        triggers the expansion.

   dblength    The size of the chunk of DIE's being examined, in bytes.

   lnfoff    The absolute file offset to the line table fragment.  Ignored
        when building partial symbol tables, but used when expanding
        them, and contains the absolute file offset to the fragment
        of the ".line" section containing the line numbers for the
        current compilation unit.
 */

struct dwfinfo {
  file_ptr dbfoff;    /* Absolute file offset to start of .debug section */
  int dbroff;        /* Relative offset from start of .debug section */
  int dblength;        /* Size of the chunk of DIE's being examined */
  file_ptr lnfoff;    /* Absolute file offset to line table fragment */
};

#define DBFOFF(p) (((struct dwfinfo *)((p)->read_symtab_private))->dbfoff)
#define DBROFF(p) (((struct dwfinfo *)((p)->read_symtab_private))->dbroff)
#define DBLENGTH(p) (((struct dwfinfo *)((p)->read_symtab_private))->dblength)
#define LNFOFF(p) (((struct dwfinfo *)((p)->read_symtab_private))->lnfoff)

/* The generic symbol table building routines have separate lists for
   file scope symbols and all all other scopes (local scopes).  So
   we need to select the right one to pass to add_symbol_to_list().
   We do it by keeping a pointer to the correct list in list_in_scope.

   FIXME:  The original dwarf code just treated the file scope as the first
   local scope, and all other local scopes as nested local scopes, and worked
   fine.  Check to see if we really need to distinguish these in buildsym.c */

struct pending **list_in_scope = &file_symbols;

/* DIES which have user defined types or modified user defined types refer to
   other DIES for the type information.  Thus we need to associate the offset
   of a DIE for a user defined type with a pointer to the type information.

   Originally this was done using a simple but expensive algorithm, with an
   array of unsorted structures, each containing an offset/type-pointer pair.
   This array was scanned linearly each time a lookup was done.  The result
   was that gdb was spending over half it's startup time munging through this
   array of pointers looking for a structure that had the right offset member.

   The second attempt used the same array of structures, but the array was
   sorted using qsort each time a new offset/type was recorded, and a binary
   search was used to find the type pointer for a given DIE offset.  This was
   even slower, due to the overhead of sorting the array each time a new
   offset/type pair was entered.

   The third attempt uses a fixed size array of type pointers, indexed by a
   value derived from the DIE offset.  Since the minimum DIE size is 4 bytes,
   we can divide any DIE offset by 4 to obtain a unique index into this fixed
   size array.  Since each element is a 4 byte pointer, it takes exactly as
   much memory to hold this array as to hold the DWARF info for a given
   compilation unit.  But it gets freed as soon as we are done with it.
   This has worked well in practice, as a reasonable tradeoff between memory
   consumption and speed, without having to resort to much more complicated
   algorithms. */

static struct type **utypes;    /* Pointer to array of user type pointers */
static int numutypes;        /* Max number of user type pointers */

/* Maintain an array of referenced fundamental types for the current
   compilation unit being read.  For DWARF version 1, we have to construct
   the fundamental types on the fly, since no information about the
   fundamental types is supplied.  Each such fundamental type is created by
   calling a language dependent routine to create the type, and then a
   pointer to that type is then placed in the array at the index specified
   by it's FT_<TYPENAME> value.  The array has a fixed size set by the
   FT_NUM_MEMBERS compile time constant, which is the number of predefined
   fundamental types gdb knows how to construct. */

static struct type *ftypes[FT_NUM_MEMBERS];  /* Fundamental types */

/* Record the language for the compilation unit which is currently being
   processed.  We know it once we have seen the TAG_compile_unit DIE,
   and we need it while processing the DIE's for that compilation unit.
   It is eventually saved in the symtab structure, but we don't finalize
   the symtab struct until we have processed all the DIE's for the
   compilation unit.  We also need to get and save a pointer to the
   language struct for this language, so we can call the language
   dependent routines for doing things such as creating fundamental
   types. */

static enum language cu_language;
static const struct language_defn *cu_language_defn;

/* Forward declarations of static functions so we don't have to worry
   about ordering within this file.  */

static int
attribute_size PARAMS ((unsigned int));

static unsigned long
target_to_host PARAMS ((char *, int, int, struct objfile *));

static void
add_enum_psymbol PARAMS ((struct dieinfo *, struct objfile *));

static void
handle_producer PARAMS ((char *));

static void
read_file_scope PARAMS ((struct dieinfo *, char *, char *, struct objfile *));

static void
read_func_scope PARAMS ((struct dieinfo *, char *, char *, struct objfile *));

static void
read_lexical_block_scope PARAMS ((struct dieinfo *, char *, char *,
                  struct objfile *));

static void
scan_partial_symbols PARAMS ((char *, char *, struct objfile *));

static void
scan_compilation_units PARAMS ((char *, char *, file_ptr,
                file_ptr, struct objfile *));

static void
add_partial_symbol PARAMS ((struct dieinfo *, struct objfile *));

static void
init_psymbol_list PARAMS ((struct objfile *, int));

static void
basicdieinfo PARAMS ((struct dieinfo *, char *, struct objfile *));

static void
completedieinfo PARAMS ((struct dieinfo *, struct objfile *));

static void
dwarf_psymtab_to_symtab PARAMS ((struct partial_symtab *));

static void
psymtab_to_symtab_1 PARAMS ((struct partial_symtab *));

static void
read_ofile_symtab PARAMS ((struct partial_symtab *));

static void
process_dies PARAMS ((char *, char *, struct objfile *));

static void
read_structure_scope PARAMS ((struct dieinfo *, char *, char *,
                  struct objfile *));

static struct type *
decode_array_element_type PARAMS ((char *));

static struct type *
decode_subscript_data_item PARAMS ((char *, char *));

static void
dwarf_read_array_type PARAMS ((struct dieinfo *));

static void
read_tag_pointer_type PARAMS ((struct dieinfo *dip));

static void
read_tag_string_type PARAMS ((struct dieinfo *dip));

static void
read_subroutine_type PARAMS ((struct dieinfo *, char *, char *));

static void
read_enumeration PARAMS ((struct dieinfo *, char *, char *, struct objfile *));

static struct type *
struct_type PARAMS ((struct dieinfo *, char *, char *, struct objfile *));

static struct type *
enum_type PARAMS ((struct dieinfo *, struct objfile *));

static void
decode_line_numbers PARAMS ((char *));

static struct type *
decode_die_type PARAMS ((struct dieinfo *));

static struct type *
decode_mod_fund_type PARAMS ((char *));

static struct type *
decode_mod_u_d_type PARAMS ((char *));

static struct type *
decode_modified_type PARAMS ((char *, unsigned int, int));

static struct type *
decode_fund_type PARAMS ((unsigned int));

static char *
create_name PARAMS ((char *, struct obstack *));

static struct type *
lookup_utype PARAMS ((DIE_REF));

static struct type *
alloc_utype PARAMS ((DIE_REF, struct type *));

static struct symbol *
new_symbol PARAMS ((struct dieinfo *, struct objfile *));

static void
synthesize_typedef PARAMS ((struct dieinfo *, struct objfile *,
                struct type *));

static int
locval PARAMS ((char *));

static void
set_cu_language PARAMS ((struct dieinfo *));

static struct type *
dwarf_fundamental_type PARAMS ((struct objfile *, int));


/*

LOCAL FUNCTION

    dwarf_fundamental_type -- lookup or create a fundamental type

SYNOPSIS

    struct type *
    dwarf_fundamental_type (struct objfile *objfile, int typeid)

DESCRIPTION

    DWARF version 1 doesn't supply any fundamental type information,
    so gdb has to construct such types.  It has a fixed number of
    fundamental types that it knows how to construct, which is the
    union of all types that it knows how to construct for all languages
    that it knows about.  These are enumerated in gdbtypes.h.

    As an example, assume we find a DIE that references a DWARF
    fundamental type of FT_integer.  We first look in the ftypes
    array to see if we already have such a type, indexed by the
    gdb internal value of FT_INTEGER.  If so, we simply return a
    pointer to that type.  If not, then we ask an appropriate
    language dependent routine to create a type FT_INTEGER, using
    defaults reasonable for the current target machine, and install
    that type in ftypes for future reference.

RETURNS

    Pointer to a fundamental type.

*/

static struct type *
dwarf_fundamental_type (objfile, typeid)
     struct objfile *objfile;
     int typeid;
{
  if (typeid < 0 || typeid >= FT_NUM_MEMBERS)
    {
      error ("internal error - invalid fundamental type id %d", typeid);
    }

  /* Look for this particular type in the fundamental type vector.  If one is
     not found, create and install one appropriate for the current language
     and the current target machine. */

  if (ftypes[typeid] == NULL)
    {
      ftypes[typeid] = cu_language_defn -> la_fund_type(objfile, typeid);
    }

  return (ftypes[typeid]);
}

/*

LOCAL FUNCTION

    set_cu_language -- set local copy of language for compilation unit

SYNOPSIS

    void
    set_cu_language (struct dieinfo *dip)

DESCRIPTION

    Decode the language attribute for a compilation unit DIE and
    remember what the language was.  We use this at various times
    when processing DIE's for a given compilation unit.

RETURNS

    No return value.

 */

static void
set_cu_language (dip)
     struct dieinfo *dip;
{
  switch (dip -> at_language)
    {
      case LANG_C89:
      case LANG_C:
        cu_language = language_c;
    break;
      case LANG_C_PLUS_PLUS:
    cu_language = language_cplus;
    break;
      case LANG_CHILL:
    cu_language = language_chill;
    break;
      case LANG_MODULA2:
    cu_language = language_m2;
    break;
      case LANG_ADA83:
      case LANG_COBOL74:
      case LANG_COBOL85:
      case LANG_FORTRAN77:
      case LANG_FORTRAN90:
      case LANG_PASCAL83:
    /* We don't know anything special about these yet. */
    cu_language = language_unknown;
    break;
      default:
    /* If no at_language, try to deduce one from the filename */
    cu_language = deduce_language_from_filename (dip -> at_name);
    break;
    }
  cu_language_defn = language_def (cu_language);
}

/*

GLOBAL FUNCTION

    dwarf_build_psymtabs -- build partial symtabs from DWARF debug info

SYNOPSIS

    void dwarf_build_psymtabs (struct objfile *objfile,
         struct section_offsets *section_offsets,
         int mainline, file_ptr dbfoff, unsigned int dbfsize,
         file_ptr lnoffset, unsigned int lnsize)

DESCRIPTION

    This function is called upon to build partial symtabs from files
    containing DIE's (Dwarf Information Entries) and DWARF line numbers.

    It is passed a bfd* containing the DIES
    and line number information, the corresponding filename for that
    file, a base address for relocating the symbols, a flag indicating
    whether or not this debugging information is from a "main symbol
    table" rather than a shared library or dynamically linked file,
    and file offset/size pairs for the DIE information and line number
    information.

RETURNS

    No return value.

 */

void
dwarf_build_psymtabs (objfile, section_offsets, mainline, dbfoff, dbfsize,
              lnoffset, lnsize)
     struct objfile *objfile;
     struct section_offsets *section_offsets;
     int mainline;
     file_ptr dbfoff;
     unsigned int dbfsize;
     file_ptr lnoffset;
     unsigned int lnsize;
{
  bfd *abfd = objfile->obfd;
  struct cleanup *back_to;

  current_objfile = objfile;
  dbsize = dbfsize;
  dbbase = xmalloc (dbsize);
  dbroff = 0;
  if ((bfd_seek (abfd, dbfoff, L_SET) != 0) ||
      (bfd_read (dbbase, dbsize, 1, abfd) != dbsize))
    {
      free (dbbase);
      error ("can't read DWARF data from '%s'", bfd_get_filename (abfd));
    }
  back_to = make_cleanup (free, dbbase);

  /* If we are reinitializing, or if we have never loaded syms yet, init.
     Since we have no idea how many DIES we are looking at, we just guess
     some arbitrary value. */

  if (mainline || objfile -> global_psymbols.size == 0 ||
      objfile -> static_psymbols.size == 0)
    {
      init_psymbol_list (objfile, 1024);
    }

  /* Save the relocation factor where everybody can see it.  */

  base_section_offsets = section_offsets;
  baseaddr = ANOFFSET (section_offsets, 0);

  /* Follow the compilation unit sibling chain, building a partial symbol
     table entry for each one.  Save enough information about each compilation
     unit to locate the full DWARF information later. */

  scan_compilation_units (dbbase, dbbase + dbsize, dbfoff, lnoffset, objfile);

  do_cleanups (back_to);
  current_objfile = NULL;
}

/*

LOCAL FUNCTION

    read_lexical_block_scope -- process all dies in a lexical block

SYNOPSIS

    static void read_lexical_block_scope (struct dieinfo *dip,
        char *thisdie, char *enddie)

DESCRIPTION

    Process all the DIES contained within a lexical block scope.
    Start a new scope, process the dies, and then close the scope.

 */

static void
read_lexical_block_scope (dip, thisdie, enddie, objfile)
     struct dieinfo *dip;
     char *thisdie;
     char *enddie;
     struct objfile *objfile;
{
  register struct context_stack *new;

  push_context (0, dip -> at_low_pc);
  process_dies (thisdie + dip -> die_length, enddie, objfile);
  new = pop_context ();
  if (local_symbols != NULL)
    {
      finish_block (0, &local_symbols, new -> old_blocks, new -> start_addr,
            dip -> at_high_pc, objfile);
    }
  local_symbols = new -> locals;
}

/*

LOCAL FUNCTION

    lookup_utype -- look up a user defined type from die reference

SYNOPSIS

    static type *lookup_utype (DIE_REF die_ref)

DESCRIPTION

    Given a DIE reference, lookup the user defined type associated with
    that DIE, if it has been registered already.  If not registered, then
    return NULL.  Alloc_utype() can be called to register an empty
    type for this reference, which will be filled in later when the
    actual referenced DIE is processed.
 */

static struct type *
lookup_utype (die_ref)
     DIE_REF die_ref;
{
  struct type *type = NULL;
  int utypeidx;

  utypeidx = (die_ref - dbroff) / 4;
  if ((utypeidx < 0) || (utypeidx >= numutypes))
    {
      complain (&bad_die_ref, DIE_ID, DIE_NAME);
    }
  else
    {
      type = *(utypes + utypeidx);
    }
  return (type);
}


/*

LOCAL FUNCTION

    alloc_utype  -- add a user defined type for die reference

SYNOPSIS

    static type *alloc_utype (DIE_REF die_ref, struct type *utypep)

DESCRIPTION

    Given a die reference DIE_REF, and a possible pointer to a user
    defined type UTYPEP, register that this reference has a user
    defined type and either use the specified type in UTYPEP or
    make a new empty type that will be filled in later.

    We should only be called after calling lookup_utype() to verify that
    there is not currently a type registered for DIE_REF.
 */

static struct type *
alloc_utype (die_ref, utypep)
     DIE_REF die_ref;
     struct type *utypep;
{
  struct type **typep;
  int utypeidx;

  utypeidx = (die_ref - dbroff) / 4;
  typep = utypes + utypeidx;
  if ((utypeidx < 0) || (utypeidx >= numutypes))
    {
      utypep = dwarf_fundamental_type (current_objfile, FT_INTEGER);
      complain (&bad_die_ref, DIE_ID, DIE_NAME);
    }
  else if (*typep != NULL)
    {
      utypep = *typep;
      complain (&dup_user_type_allocation, DIE_ID, DIE_NAME);
    }
  else
    {
      if (utypep == NULL)
    {
      utypep = alloc_type (current_objfile);
    }
      *typep = utypep;
    }
  return (utypep);
}

/*

LOCAL FUNCTION

    decode_die_type -- return a type for a specified die

SYNOPSIS

    static struct type *decode_die_type (struct dieinfo *dip)

DESCRIPTION

    Given a pointer to a die information structure DIP, decode the
    type of the die and return a pointer to the decoded type.  All
    dies without specific types default to type int.
 */

static struct type *
decode_die_type (dip)
     struct dieinfo *dip;
{
  struct type *type = NULL;

  if (dip -> at_fund_type != 0)
    {
      type = decode_fund_type (dip -> at_fund_type);
    }
  else if (dip -> at_mod_fund_type != NULL)
    {
      type = decode_mod_fund_type (dip -> at_mod_fund_type);
    }
  else if (dip -> at_user_def_type)
    {
      if ((type = lookup_utype (dip -> at_user_def_type)) == NULL)
    {
      type = alloc_utype (dip -> at_user_def_type, NULL);
    }
    }
  else if (dip -> at_mod_u_d_type)
    {
      type = decode_mod_u_d_type (dip -> at_mod_u_d_type);
    }
  else
    {
      type = dwarf_fundamental_type (current_objfile, FT_INTEGER);
    }
  return (type);
}

/*

LOCAL FUNCTION

    struct_type -- compute and return the type for a struct or union

SYNOPSIS

    static struct type *struct_type (struct dieinfo *dip, char *thisdie,
        char *enddie, struct objfile *objfile)

DESCRIPTION

    Given pointer to a die information structure for a die which
    defines a union or structure (and MUST define one or the other),
    and pointers to the raw die data that define the range of dies which
    define the members, compute and return the user defined type for the
    structure or union.
 */

static struct type *
struct_type (dip, thisdie, enddie, objfile)
     struct dieinfo *dip;
     char *thisdie;
     char *enddie;
     struct objfile *objfile;
{
  struct type *type;
  struct nextfield {
    struct nextfield *next;
    struct field field;
  };
  struct nextfield *list = NULL;
  struct nextfield *new;
  int nfields = 0;
  int n;
  struct dieinfo mbr;
  char *nextdie;
  int anonymous_size;

  if ((type = lookup_utype (dip -> die_ref)) == NULL)
    {
      /* No forward references created an empty type, so install one now */
      type = alloc_utype (dip -> die_ref, NULL);
    }
  INIT_CPLUS_SPECIFIC(type);
  switch (dip -> die_tag)
    {
      case TAG_class_type:
        TYPE_CODE (type) = TYPE_CODE_CLASS;
    break;
      case TAG_structure_type:
        TYPE_CODE (type) = TYPE_CODE_STRUCT;
    break;
      case TAG_union_type:
    TYPE_CODE (type) = TYPE_CODE_UNION;
    break;
      default:
    /* Should never happen */
    TYPE_CODE (type) = TYPE_CODE_UNDEF;
    complain (&missing_tag, DIE_ID, DIE_NAME);
    break;
    }
  /* Some compilers try to be helpful by inventing "fake" names for
     anonymous enums, structures, and unions, like "~0fake" or ".0fake".
     Thanks, but no thanks... */
  if (dip -> at_name != NULL
      && *dip -> at_name != '~'
      && *dip -> at_name != '.')
    {
      TYPE_TAG_NAME (type) = obconcat (&objfile -> type_obstack,
                       "", "", dip -> at_name);
    }
  /* Use whatever size is known.  Zero is a valid size.  We might however
     wish to check has_at_byte_size to make sure that some byte size was
     given explicitly, but DWARF doesn't specify that explicit sizes of
     zero have to present, so complaining about missing sizes should
     probably not be the default. */
  TYPE_LENGTH (type) = dip -> at_byte_size;
  thisdie += dip -> die_length;
  while (thisdie < enddie)
    {
      basicdieinfo (&mbr, thisdie, objfile);
      completedieinfo (&mbr, objfile);
      if (mbr.die_length <= SIZEOF_DIE_LENGTH)
    {
      break;
    }
      else if (mbr.at_sibling != 0)
    {
      nextdie = dbbase + mbr.at_sibling - dbroff;
    }
      else
    {
      nextdie = thisdie + mbr.die_length;
    }
      switch (mbr.die_tag)
    {
    case TAG_member:
      /* Get space to record the next field's data.  */
      new = (struct nextfield *) alloca (sizeof (struct nextfield));
      new -> next = list;
      list = new;
      /* Save the data.  */
      list -> field.name =
          obsavestring (mbr.at_name, strlen (mbr.at_name),
                &objfile -> type_obstack);
      list -> field.type = decode_die_type (&mbr);
      list -> field.bitpos = 8 * locval (mbr.at_location);
      /* Handle bit fields. */
      list -> field.bitsize = mbr.at_bit_size;
      if (BITS_BIG_ENDIAN)
        {
          /* For big endian bits, the at_bit_offset gives the
         additional bit offset from the MSB of the containing
         anonymous object to the MSB of the field.  We don't
         have to do anything special since we don't need to
         know the size of the anonymous object. */
          list -> field.bitpos += mbr.at_bit_offset;
        }
      else
        {
          /* For little endian bits, we need to have a non-zero
         at_bit_size, so that we know we are in fact dealing
         with a bitfield.  Compute the bit offset to the MSB
         of the anonymous object, subtract off the number of
         bits from the MSB of the field to the MSB of the
         object, and then subtract off the number of bits of
         the field itself.  The result is the bit offset of
         the LSB of the field. */
          if (mbr.at_bit_size > 0)
        {
          if (mbr.has_at_byte_size)
            {
              /* The size of the anonymous object containing
             the bit field is explicit, so use the
             indicated size (in bytes). */
              anonymous_size = mbr.at_byte_size;
            }
          else
            {
              /* The size of the anonymous object containing
             the bit field matches the size of an object
             of the bit field's type.  DWARF allows
             at_byte_size to be left out in such cases, as
             a debug information size optimization. */
              anonymous_size = TYPE_LENGTH (list -> field.type);
            }
          list -> field.bitpos +=
            anonymous_size * 8 - mbr.at_bit_offset - mbr.at_bit_size;
        }
        }
      nfields++;
      break;
    default:
      process_dies (thisdie, nextdie, objfile);
      break;
    }
      thisdie = nextdie;
    }
  /* Now create the vector of fields, and record how big it is.  We may
     not even have any fields, if this DIE was generated due to a reference
     to an anonymous structure or union.  In this case, TYPE_FLAG_STUB is
     set, which clues gdb in to the fact that it needs to search elsewhere
     for the full structure definition. */
  if (nfields == 0)
    {
      TYPE_FLAGS (type) |= TYPE_FLAG_STUB;
    }
  else
    {
      TYPE_NFIELDS (type) = nfields;
      TYPE_FIELDS (type) = (struct field *)
    TYPE_ALLOC (type, sizeof (struct field) * nfields);
      /* Copy the saved-up fields into the field vector.  */
      for (n = nfields; list; list = list -> next)
    {
      TYPE_FIELD (type, --n) = list -> field;
    }
    }
  return (type);
}

/*

LOCAL FUNCTION

    read_structure_scope -- process all dies within struct or union

SYNOPSIS

    static void read_structure_scope (struct dieinfo *dip,
        char *thisdie, char *enddie, struct objfile *objfile)

DESCRIPTION

    Called when we find the DIE that starts a structure or union
    scope (definition) to process all dies that define the members
    of the structure or union.  DIP is a pointer to the die info
    struct for the DIE that names the structure or union.

NOTES

    Note that we need to call struct_type regardless of whether or not
    the DIE has an at_name attribute, since it might be an anonymous
    structure or union.  This gets the type entered into our set of
    user defined types.

    However, if the structure is incomplete (an opaque struct/union)
    then suppress creating a symbol table entry for it since gdb only
    wants to find the one with the complete definition.  Note that if
    it is complete, we just call new_symbol, which does it's own
    checking about whether the struct/union is anonymous or not (and
    suppresses creating a symbol table entry itself).

 */

static void
read_structure_scope (dip, thisdie, enddie, objfile)
     struct dieinfo *dip;
     char *thisdie;
     char *enddie;
     struct objfile *objfile;
{
  struct type *type;
  struct symbol *sym;

  type = struct_type (dip, thisdie, enddie, objfile);
  if (!(TYPE_FLAGS (type) & TYPE_FLAG_STUB))
    {
      sym = new_symbol (dip, objfile);
      if (sym != NULL)
    {
      SYMBOL_TYPE (sym) = type;
      if (cu_language == language_cplus)
        {
          synthesize_typedef (dip, objfile, type);
        }
    }
    }
}

/*

LOCAL FUNCTION

    decode_array_element_type -- decode type of the array elements

SYNOPSIS

    static struct type *decode_array_element_type (char *scan, char *end)

DESCRIPTION

    As the last step in decoding the array subscript information for an
    array DIE, we need to decode the type of the array elements.  We are
    passed a pointer to this last part of the subscript information and
    must return the appropriate type.  If the type attribute is not
    recognized, just warn about the problem and return type int.
 */

static struct type *
decode_array_element_type (scan)
     char *scan;
{
  struct type *typep;
  DIE_REF die_ref;
  unsigned short attribute;
  unsigned short fundtype;
  int nbytes;

  attribute = target_to_host (scan, SIZEOF_ATTRIBUTE, GET_UNSIGNED,
                  current_objfile);
  scan += SIZEOF_ATTRIBUTE;
  if ((nbytes = attribute_size (attribute)) == -1)
    {
      complain (&bad_array_element_type, DIE_ID, DIE_NAME, attribute);
      typep = dwarf_fundamental_type (current_objfile, FT_INTEGER);
    }
  else
    {
      switch (attribute)
    {
      case AT_fund_type:
        fundtype = target_to_host (scan, nbytes, GET_UNSIGNED,
                       current_objfile);
        typep = decode_fund_type (fundtype);
        break;
      case AT_mod_fund_type:
        typep = decode_mod_fund_type (scan);
        break;
      case AT_user_def_type:
        die_ref = target_to_host (scan, nbytes, GET_UNSIGNED,
                      current_objfile);
        if ((typep = lookup_utype (die_ref)) == NULL)
          {
        typep = alloc_utype (die_ref, NULL);
          }
        break;
      case AT_mod_u_d_type:
        typep = decode_mod_u_d_type (scan);
        break;
      default:
        complain (&bad_array_element_type, DIE_ID, DIE_NAME, attribute);
        typep = dwarf_fundamental_type (current_objfile, FT_INTEGER);
        break;
      }
    }
  return (typep);
}

/*

LOCAL FUNCTION

    decode_subscript_data_item -- decode array subscript item

SYNOPSIS

    static struct type *
    decode_subscript_data_item (char *scan, char *end)

DESCRIPTION

    The array subscripts and the data type of the elements of an
    array are described by a list of data items, stored as a block
    of contiguous bytes.  There is a data item describing each array
    dimension, and a final data item describing the element type.
    The data items are ordered the same as their appearance in the
    source (I.E. leftmost dimension first, next to leftmost second,
    etc).

    The data items describing each array dimension consist of four
    parts: (1) a format specifier, (2) type type of the subscript
    index, (3) a description of the low bound of the array dimension,
    and (4) a description of the high bound of the array dimension.

    The last data item is the description of the type of each of
    the array elements.

    We are passed a pointer to the start of the block of bytes
    containing the remaining data items, and a pointer to the first
    byte past the data.  This function recursively decodes the
    remaining data items and returns a type.

    If we somehow fail to decode some data, we complain about it
    and return a type "array of int".

BUGS
    FIXME:  This code only implements the forms currently used
    by the AT&T and GNU C compilers.

    The end pointer is supplied for error checking, maybe we should
    use it for that...
 */

static struct type *
decode_subscript_data_item (scan, end)
     char *scan;
     char *end;
{
  struct type *typep = NULL;    /* Array type we are building */
  struct type *nexttype;    /* Type of each element (may be array) */
  struct type *indextype;    /* Type of this index */
  struct type *rangetype;
  unsigned int format;
  unsigned short fundtype;
  unsigned long lowbound;
  unsigned long highbound;
  int nbytes;

  format = target_to_host (scan, SIZEOF_FORMAT_SPECIFIER, GET_UNSIGNED,
               current_objfile);
  scan += SIZEOF_FORMAT_SPECIFIER;
  switch (format)
    {
    case FMT_ET:
      typep = decode_array_element_type (scan);
      break;
    case FMT_FT_C_C:
      fundtype = target_to_host (scan, SIZEOF_FMT_FT, GET_UNSIGNED,
                 current_objfile);
      indextype = decode_fund_type (fundtype);
      scan += SIZEOF_FMT_FT;
      nbytes = TARGET_FT_LONG_SIZE (current_objfile);
      lowbound = target_to_host (scan, nbytes, GET_UNSIGNED, current_objfile);
      scan += nbytes;
      highbound = target_to_host (scan, nbytes, GET_UNSIGNED, current_objfile);
      scan += nbytes;
      nexttype = decode_subscript_data_item (scan, end);
      if (nexttype == NULL)
    {
      /* Munged subscript data or other problem, fake it. */
      complain (&subscript_data_items, DIE_ID, DIE_NAME);
      nexttype = dwarf_fundamental_type (current_objfile, FT_INTEGER);
    }
      rangetype = create_range_type ((struct type *) NULL, indextype,
                      lowbound, highbound);
      typep = create_array_type ((struct type *) NULL, nexttype, rangetype);
      break;
    case FMT_FT_C_X:
    case FMT_FT_X_C:
    case FMT_FT_X_X:
    case FMT_UT_C_C:
    case FMT_UT_C_X:
    case FMT_UT_X_C:
    case FMT_UT_X_X:
      complain (&unhandled_array_subscript_format, DIE_ID, DIE_NAME, format);
      nexttype = dwarf_fundamental_type (current_objfile, FT_INTEGER);
      rangetype = create_range_type ((struct type *) NULL, nexttype, 0, 0);
      typep = create_array_type ((struct type *) NULL, nexttype, rangetype);
      break;
    default:
      complain (&unknown_array_subscript_format, DIE_ID, DIE_NAME, format);
      nexttype = dwarf_fundamental_type (current_objfile, FT_INTEGER);
      rangetype = create_range_type ((struct type *) NULL, nexttype, 0, 0);
      typep = create_array_type ((struct type *) NULL, nexttype, rangetype);
      break;
    }
  return (typep);
}

/*

LOCAL FUNCTION

    dwarf_read_array_type -- read TAG_array_type DIE

SYNOPSIS

    static void dwarf_read_array_type (struct dieinfo *dip)

DESCRIPTION

    Extract all information from a TAG_array_type DIE and add to
    the user defined type vector.
 */

static void
dwarf_read_array_type (dip)
     struct dieinfo *dip;
{
  struct type *type;
  struct type *utype;
  char *sub;
  char *subend;
  unsigned short blocksz;
  int nbytes;

  if (dip -> at_ordering != ORD_row_major)
    {
      /* FIXME:  Can gdb even handle column major arrays? */
      complain (¬_row_major, DIE_ID, DIE_NAME);
    }
  if ((sub = dip -> at_subscr_data) != NULL)
    {
      nbytes = attribute_size (AT_subscr_data);
      blocksz = target_to_host (sub, nbytes, GET_UNSIGNED, current_objfile);
      subend = sub + nbytes + blocksz;
      sub += nbytes;
      type = decode_subscript_data_item (sub, subend);
      if ((utype = lookup_utype (dip -> die_ref)) == NULL)
    {
      /* Install user defined type that has not been referenced yet. */
      alloc_utype (dip -> die_ref, type);
    }
      else if (TYPE_CODE (utype) == TYPE_CODE_UNDEF)
    {
      /* Ick!  A forward ref has already generated a blank type in our
         slot, and this type probably already has things pointing to it
         (which is what caused it to be created in the first place).
         If it's just a place holder we can plop our fully defined type
         on top of it.  We can't recover the space allocated for our
         new type since it might be on an obstack, but we could reuse
         it if we kept a list of them, but it might not be worth it
         (FIXME). */
      *utype = *type;
    }
      else
    {
      /* Double ick!  Not only is a type already in our slot, but
         someone has decorated it.  Complain and leave it alone. */
      complain (&dup_user_type_definition, DIE_ID, DIE_NAME);
    }
    }
}

/*

LOCAL FUNCTION

    read_tag_pointer_type -- read TAG_pointer_type DIE

SYNOPSIS

    static void read_tag_pointer_type (struct dieinfo *dip)

DESCRIPTION

    Extract all information from a TAG_pointer_type DIE and add to
    the user defined type vector.
 */

static void
read_tag_pointer_type (dip)
     struct dieinfo *dip;
{
  struct type *type;
  struct type *utype;

  type = decode_die_type (dip);
  if ((utype = lookup_utype (dip -> die_ref)) == NULL)
    {
      utype = lookup_pointer_type (type);
      alloc_utype (dip -> die_ref, utype);
    }
  else
    {
      TYPE_TARGET_TYPE (utype) = type;
      TYPE_POINTER_TYPE (type) = utype;

      /* We assume the machine has only one representation for pointers!  */
      /* FIXME:  This confuses host<->target data representations, and is a
     poor assumption besides. */

      TYPE_LENGTH (utype) = sizeof (char *);
      TYPE_CODE (utype) = TYPE_CODE_PTR;
    }
}

/*

LOCAL FUNCTION

    read_tag_string_type -- read TAG_string_type DIE

SYNOPSIS

    static void read_tag_string_type (struct dieinfo *dip)

DESCRIPTION

    Extract all information from a TAG_string_type DIE and add to
    the user defined type vector.  It isn't really a user defined
    type, but it behaves like one, with other DIE's using an
    AT_user_def_type attribute to reference it.
 */

static void
read_tag_string_type (dip)
     struct dieinfo *dip;
{
  struct type *utype;
  struct type *indextype;
  struct type *rangetype;
  unsigned long lowbound = 0;
  unsigned long highbound;

  if (dip -> has_at_byte_size)
    {
      /* A fixed bounds string */
      highbound = dip -> at_byte_size - 1;
    }
  else
    {
      /* A varying length string.  Stub for now.  (FIXME) */
      highbound = 1;
    }
  indextype = dwarf_fundamental_type (current_objfile, FT_INTEGER);
  rangetype = create_range_type ((struct type *) NULL, indextype, lowbound,
                 highbound);

  utype = lookup_utype (dip -> die_ref);
  if (utype == NULL)
    {
      /* No type defined, go ahead and create a blank one to use. */
      utype = alloc_utype (dip -> die_ref, (struct type *) NULL);
    }
  else
    {
      /* Already a type in our slot due to a forward reference. Make sure it
     is a blank one.  If not, complain and leave it alone. */
      if (TYPE_CODE (utype) != TYPE_CODE_UNDEF)
    {
      complain (&dup_user_type_definition, DIE_ID, DIE_NAME);
      return;
    }
    }

  /* Create the string type using the blank type we either found or created. */
  utype = create_string_type (utype, rangetype);
}

/*

LOCAL FUNCTION

    read_subroutine_type -- process TAG_subroutine_type dies

SYNOPSIS

    static void read_subroutine_type (struct dieinfo *dip, char thisdie,
        char *enddie)

DESCRIPTION

    Handle DIES due to C code like:

    struct foo {
        int (*funcp)(int a, long l);  (Generates TAG_subroutine_type DIE)
        int b;
    };

NOTES

    The parameter DIES are currently ignored.  See if gdb has a way to
    include this info in it's type system, and decode them if so.  Is
    this what the type structure's "arg_types" field is for?  (FIXME)
 */

static void
read_subroutine_type (dip, thisdie, enddie)
     struct dieinfo *dip;
     char *thisdie;
     char *enddie;
{
  struct type *type;        /* Type that this function returns */
  struct type *ftype;        /* Function that returns above type */

  /* Decode the type that this subroutine returns */

  type = decode_die_type (dip);

  /* Check to see if we already have a partially constructed user
     defined type for this DIE, from a forward reference. */

  if ((ftype = lookup_utype (dip -> die_ref)) == NULL)
    {
      /* This is the first reference to one of these types.  Make
     a new one and place it in the user defined types. */
      ftype = lookup_function_type (type);
      alloc_utype (dip -> die_ref, ftype);
    }
  else if (TYPE_CODE (ftype) == TYPE_CODE_UNDEF)
    {
      /* We have an existing partially constructed type, so bash it
     into the correct type. */
      TYPE_TARGET_TYPE (ftype) = type;
      TYPE_FUNCTION_TYPE (type) = ftype;
      TYPE_LENGTH (ftype) = 1;
      TYPE_CODE (ftype) = TYPE_CODE_FUNC;
    }
  else
    {
      complain (&dup_user_type_definition, DIE_ID, DIE_NAME);
    }
}

/*

LOCAL FUNCTION

    read_enumeration -- process dies which define an enumeration

SYNOPSIS

    static void read_enumeration (struct dieinfo *dip, char *thisdie,
        char *enddie, struct objfile *objfile)

DESCRIPTION

    Given a pointer to a die which begins an enumeration, process all
    the dies that define the members of the enumeration.

NOTES

    Note that we need to call enum_type regardless of whether or not we
    have a symbol, since we might have an enum without a tag name (thus
    no symbol for the tagname).
 */

static void
read_enumeration (dip, thisdie, enddie, objfile)
     struct dieinfo *dip;
     char *thisdie;
     char *enddie;
     struct objfile *objfile;
{
  struct type *type;
  struct symbol *sym;

  type = enum_type (dip, objfile);
  sym = new_symbol (dip, objfile);
  if (sym != NULL)
    {
      SYMBOL_TYPE (sym) = type;
      if (cu_language == language_cplus)
    {
      synthesize_typedef (dip, objfile, type);
    }
    }
}

/*

LOCAL FUNCTION

    enum_type -- decode and return a type for an enumeration

SYNOPSIS

    static type *enum_type (struct dieinfo *dip, struct objfile *objfile)

DESCRIPTION

    Given a pointer to a die information structure for the die which
    starts an enumeration, process all the dies that define the members
    of the enumeration and return a type pointer for the enumeration.

    At the same time, for each member of the enumeration, create a
    symbol for it with namespace VAR_NAMESPACE and class LOC_CONST,
    and give it the type of the enumeration itself.

NOTES

    Note that the DWARF specification explicitly mandates that enum
    constants occur in reverse order from the source program order,
    for "consistency" and because this ordering is easier for many
    compilers to generate. (Draft 6, sec 3.8.5, Enumeration type
    Entries).  Because gdb wants to see the enum members in program
    source order, we have to ensure that the order gets reversed while
    we are processing them.
 */

static struct type *
enum_type (dip, objfile)
     struct dieinfo *dip;
     struct objfile *objfile;
{
  struct type *type;
  struct nextfield {
    struct nextfield *next;
    struct field field;
  };
  struct nextfield *list = NULL;
  struct nextfield *new;
  int nfields = 0;
  int n;
  char *scan;
  char *listend;
  unsigned short blocksz;
  struct symbol *sym;
  int nbytes;

  if ((type = lookup_utype (dip -> die_ref)) == NULL)
    {
      /* No forward references created an empty type, so install one now */
      type = alloc_utype (dip -> die_ref, NULL);
    }
  TYPE_CODE (type) = TYPE_CODE_ENUM;
  /* Some compilers try to be helpful by inventing "fake" names for
     anonymous enums, structures, and unions, like "~0fake" or ".0fake".
     Thanks, but no thanks... */
  if (dip -> at_name != NULL
      && *dip -> at_name != '~'
      && *dip -> at_name != '.')
    {
      TYPE_TAG_NAME (type) = obconcat (&objfile -> type_obstack,
                       "", "", dip -> at_name);
    }
  if (dip -> at_byte_size != 0)
    {
      TYPE_LENGTH (type) = dip -> at_byte_size;
    }
  if ((scan = dip -> at_element_list) != NULL)
    {
      if (dip -> short_element_list)
    {
      nbytes = attribute_size (AT_short_element_list);
    }
      else
    {
      nbytes = attribute_size (AT_element_list);
    }
      blocksz = target_to_host (scan, nbytes, GET_UNSIGNED, objfile);
      listend = scan + nbytes + blocksz;
      scan += nbytes;
      while (scan < listend)
    {
      new = (struct nextfield *) alloca (sizeof (struct nextfield));
      new -> next = list;
      list = new;
      list -> field.type = NULL;
      list -> field.bitsize = 0;
      list -> field.bitpos =
        target_to_host (scan, TARGET_FT_LONG_SIZE (objfile), GET_SIGNED,
                objfile);
      scan += TARGET_FT_LONG_SIZE (objfile);
      list -> field.name = obsavestring (scan, strlen (scan),
                         &objfile -> type_obstack);
      scan += strlen (scan) + 1;
      nfields++;
      /* Handcraft a new symbol for this enum member. */
      sym = (struct symbol *) obstack_alloc (&objfile->symbol_obstack,
                         sizeof (struct symbol));
      memset (sym, 0, sizeof (struct symbol));
      SYMBOL_NAME (sym) = create_name (list -> field.name,
                       &objfile->symbol_obstack);
      SYMBOL_INIT_LANGUAGE_SPECIFIC (sym, cu_language);
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      SYMBOL_CLASS (sym) = LOC_CONST;
      SYMBOL_TYPE (sym) = type;
      SYMBOL_VALUE (sym) = list -> field.bitpos;
      add_symbol_to_list (sym, list_in_scope);
    }
      /* Now create the vector of fields, and record how big it is. This is
     where we reverse the order, by pulling the members off the list in
     reverse order from how they were inserted.  If we have no fields
     (this is apparently possible in C++) then skip building a field
     vector. */
      if (nfields > 0)
    {
      TYPE_NFIELDS (type) = nfields;
      TYPE_FIELDS (type) = (struct field *)
        obstack_alloc (&objfile->symbol_obstack, sizeof (struct field) * nfields);
      /* Copy the saved-up fields into the field vector.  */
      for (n = 0; (n < nfields) && (list != NULL); list = list -> next)
        {
          TYPE_FIELD (type, n++) = list -> field;
        }
    }
    }
  return (type);
}

/*

LOCAL FUNCTION

    read_func_scope -- process all dies within a function scope

DESCRIPTION

    Process all dies within a given function scope.  We are passed
    a die information structure pointer DIP for the die which
    starts the function scope, and pointers into the raw die data
    that define the dies within the function scope.

    For now, we ignore lexical block scopes within the function.
    The problem is that AT&T cc does not define a DWARF lexical
    block scope for the function itself, while gcc defines a
    lexical block scope for the function.  We need to think about
    how to handle this difference, or if it is even a problem.
    (FIXME)
 */

static void
read_func_scope (dip, thisdie, enddie, objfile)
     struct dieinfo *dip;
     char *thisdie;
     char *enddie;
     struct objfile *objfile;
{
  register struct context_stack *new;

  if (objfile -> ei.entry_point >= dip -> at_low_pc &&
      objfile -> ei.entry_point <  dip -> at_high_pc)
    {
      objfile -> ei.entry_func_lowpc = dip -> at_low_pc;
      objfile -> ei.entry_func_highpc = dip -> at_high_pc;
    }
  if (STREQ (dip -> at_name, "main"))    /* FIXME: hardwired name */
    {
      objfile -> ei.main_func_lowpc = dip -> at_low_pc;
      objfile -> ei.main_func_highpc = dip -> at_high_pc;
    }
  new = push_context (0, dip -> at_low_pc);
  new -> name = new_symbol (dip, objfile);
  list_in_scope = &local_symbols;
  process_dies (thisdie + dip -> die_length, enddie, objfile);
  new = pop_context ();
  /* Make a block for the local symbols within.  */
  finish_block (new -> name, &local_symbols, new -> old_blocks,
        new -> start_addr, dip -> at_high_pc, objfile);
  list_in_scope = &file_symbols;
}


/*

LOCAL FUNCTION

    handle_producer -- process the AT_producer attribute

DESCRIPTION

    Perform any operations that depend on finding a particular
    AT_producer attribute.

 */

static void
handle_producer (producer)
     char *producer;
{

  /* If this compilation unit was compiled with g++ or gcc, then set the
     processing_gcc_compilation flag. */

  processing_gcc_compilation =
    STREQN (producer, GPLUS_PRODUCER, strlen (GPLUS_PRODUCER))
      || STREQN (producer, CHILL_PRODUCER, strlen (CHILL_PRODUCER))
      || STREQN (producer, GCC_PRODUCER, strlen (GCC_PRODUCER));

  /* Select a demangling style if we can identify the producer and if
     the current style is auto.  We leave the current style alone if it
     is not auto.  We also leave the demangling style alone if we find a
     gcc (cc1) producer, as opposed to a g++ (cc1plus) producer. */

  if (AUTO_DEMANGLING)
    {
      if (STREQN (producer, GPLUS_PRODUCER, strlen (GPLUS_PRODUCER)))
    {
      set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
    }
      else if (STREQN (producer, LCC_PRODUCER, strlen (LCC_PRODUCER)))
    {
      set_demangling_style (LUCID_DEMANGLING_STYLE_STRING);
    }
    }
}


/*

LOCAL FUNCTION

    read_file_scope -- process all dies within a file scope

DESCRIPTION

    Process all dies within a given file scope.  We are passed a
    pointer to the die information structure for the die which
    starts the file scope, and pointers into the raw die data which
    mark the range of dies within the file scope.

    When the partial symbol table is built, the file offset for the line
    number table for each compilation unit is saved in the partial symbol
    table entry for that compilation unit.  As the symbols for each
    compilation unit are read, the line number table is read into memory
    and the variable lnbase is set to point to it.  Thus all we have to
    do is use lnbase to access the line number table for the current
    compilation unit.
 */

static void
read_file_scope (dip, thisdie, enddie, objfile)
     struct dieinfo *dip;
     char *thisdie;
     char *enddie;
     struct objfile *objfile;
{
  struct cleanup *back_to;
  struct symtab *symtab;

  if (objfile -> ei.entry_point >= dip -> at_low_pc &&
      objfile -> ei.entry_point <  dip -> at_high_pc)
    {
      objfile -> ei.entry_file_lowpc = dip -> at_low_pc;
      objfile -> ei.entry_file_highpc = dip -> at_high_pc;
    }
  set_cu_language (dip);
  if (dip -> at_producer != NULL)
    {
      handle_producer (dip -> at_producer);
    }
  numutypes = (enddie - thisdie) / 4;
  utypes = (struct type **) xmalloc (numutypes * sizeof (struct type *));
  back_to = make_cleanup (free, utypes);
  memset (utypes, 0, numutypes * sizeof (struct type *));
  memset (ftypes, 0, FT_NUM_MEMBERS * sizeof (struct type *));
  start_symtab (dip -> at_name, dip -> at_comp_dir, dip -> at_low_pc);
  decode_line_numbers (lnbase);
  process_dies (thisdie + dip -> die_length, enddie, objfile);

  symtab = end_symtab (dip -> at_high_pc, 0, 0, objfile, 0);
  if (symtab != NULL)
    {
      symtab -> language = cu_language;
    }
  do_cleanups (back_to);
  utypes = NULL;
  numutypes = 0;
}

/*

LOCAL FUNCTION

    process_dies -- process a range of DWARF Information Entries

SYNOPSIS

    static void process_dies (char *thisdie, char *enddie,
                  struct objfile *objfile)

DESCRIPTION

    Process all DIE's in a specified range.  May be (and almost
    certainly will be) called recursively.
 */

static void
process_dies (thisdie, enddie, objfile)
     char *thisdie;
     char *enddie;
     struct objfile *objfile;
{
  char *nextdie;
  struct dieinfo di;

  while (thisdie < enddie)
    {
      basicdieinfo (&di, thisdie, objfile);
      if (di.die_length < SIZEOF_DIE_LENGTH)
    {
      break;
    }
      else if (di.die_tag == TAG_padding)
    {
      nextdie = thisdie + di.die_length;
    }
      else
    {
      completedieinfo (&di, objfile);
      if (di.at_sibling != 0)
        {
          nextdie = dbbase + di.at_sibling - dbroff;
        }
      else
        {
          nextdie = thisdie + di.die_length;
        }
#ifdef SMASH_TEXT_ADDRESS
      /* I think that these are always text, not data, addresses.  */
      SMASH_TEXT_ADDRESS (di.at_low_pc);
      SMASH_TEXT_ADDRESS (di.at_high_pc);
#endif
      switch (di.die_tag)
        {
        case TAG_compile_unit:
          /* Skip Tag_compile_unit if we are already inside a compilation
         unit, we are unable to handle nested compilation units
         properly (FIXME).  */
          if (current_subfile == NULL)
        read_file_scope (&di, thisdie, nextdie, objfile);
          else
        nextdie = thisdie + di.die_length;
          break;
        case TAG_global_subroutine:
        case TAG_subroutine:
          if (di.has_at_low_pc)
        {
          read_func_scope (&di, thisdie, nextdie, objfile);
        }
          break;
        case TAG_lexical_block:
          read_lexical_block_scope (&di, thisdie, nextdie, objfile);
          break;
        case TAG_class_type:
        case TAG_structure_type:
        case TAG_union_type:
          read_structure_scope (&di, thisdie, nextdie, objfile);
          break;
        case TAG_enumeration_type:
          read_enumeration (&di, thisdie, nextdie, objfile);
          break;
        case TAG_subroutine_type:
          read_subroutine_type (&di, thisdie, nextdie);
          break;
        case TAG_array_type:
          dwarf_read_array_type (&di);
          break;
        case TAG_pointer_type:
          read_tag_pointer_type (&di);
          break;
        case TAG_string_type:
          read_tag_string_type (&di);
          break;
        default:
          new_symbol (&di, objfile);
          break;
        }
    }
      thisdie = nextdie;
    }
}

/*

LOCAL FUNCTION

    decode_line_numbers -- decode a line number table fragment

SYNOPSIS

    static void decode_line_numbers (char *tblscan, char *tblend,
        long length, long base, long line, long pc)

DESCRIPTION

    Translate the DWARF line number information to gdb form.

    The ".line" section contains one or more line number tables, one for
    each ".line" section from the objects that were linked.

    The AT_stmt_list attribute for each TAG_source_file entry in the
    ".debug" section contains the offset into the ".line" section for the
    start of the table for that file.

    The table itself has the following structure:

    <table length><base address><source statement entry>
    4 bytes       4 bytes       10 bytes

    The table length is the total size of the table, including the 4 bytes
    for the length information.

    The base address is the address of the first instruction generated
    for the source file.

    Each source statement entry has the following structure:

    <line number><statement position><address delta>
    4 bytes      2 bytes             4 bytes

    The line number is relative to the start of the file, starting with
    line 1.

    The statement position either -1 (0xFFFF) or the number of characters
    from the beginning of the line to the beginning of the statement.

    The address delta is the difference between the base address and
    the address of the first instruction for the statement.

    Note that we must copy the bytes from the packed table to our local
    variables before attempting to use them, to avoid alignment problems
    on some machines, particularly RISC processors.

BUGS

    Does gdb expect the line numbers to be sorted?  They are now by
    chance/luck, but are not required to be.  (FIXME)

    The line with number 0 is unused, gdb apparently can discover the
    span of the last line some other way. How?  (FIXME)
 */

static void
decode_line_numbers (linetable)
     char *linetable;
{
  char *tblscan;
  char *tblend;
  unsigned long length;
  unsigned long base;
  unsigned long line;
  unsigned long pc;

  if (linetable != NULL)
    {
      tblscan = tblend = linetable;
      length = target_to_host (tblscan, SIZEOF_LINETBL_LENGTH, GET_UNSIGNED,
                   current_objfile);
      tblscan += SIZEOF_LINETBL_LENGTH;
      tblend += length;
      base = target_to_host (tblscan, TARGET_FT_POINTER_SIZE (objfile),
                 GET_UNSIGNED, current_objfile);
      tblscan += TARGET_FT_POINTER_SIZE (objfile);
      base += baseaddr;
      while (tblscan < tblend)
    {
      line = target_to_host (tblscan, SIZEOF_LINETBL_LINENO, GET_UNSIGNED,
                 current_objfile);
      tblscan += SIZEOF_LINETBL_LINENO + SIZEOF_LINETBL_STMT;
      pc = target_to_host (tblscan, SIZEOF_LINETBL_DELTA, GET_UNSIGNED,
                   current_objfile);
      tblscan += SIZEOF_LINETBL_DELTA;
      pc += base;
      if (line != 0)
        {
          record_line (current_subfile, line, pc);
        }
    }
    }
}

/*

LOCAL FUNCTION

    locval -- compute the value of a location attribute

SYNOPSIS

    static int locval (char *loc)

DESCRIPTION

    Given pointer to a string of bytes that define a location, compute
    the location and return the value.

    When computing values involving the current value of the frame pointer,
    the value zero is used, which results in a value relative to the frame
    pointer, rather than the absolute value.  This is what GDB wants
    anyway.

    When the result is a register number, the global isreg flag is set,
    otherwise it is cleared.  This is a kludge until we figure out a better
    way to handle the problem.  Gdb's design does not mesh well with the
    DWARF notion of a location computing interpreter, which is a shame
    because the flexibility goes unused.

NOTES

    Note that stack[0] is unused except as a default error return.
    Note that stack overflow is not yet handled.
 */

static int
locval (loc)
     char *loc;
{
  unsigned short nbytes;
  unsigned short locsize;
  auto long stack[64];
  int stacki;
  char *end;
  int loc_atom_code;
  int loc_value_size;

  nbytes = attribute_size (AT_location);
  locsize = target_to_host (loc, nbytes, GET_UNSIGNED, current_objfile);
  loc += nbytes;
  end = loc + locsize;
  stacki = 0;
  stack[stacki] = 0;
  isreg = 0;
  offreg = 0;
  loc_value_size = TARGET_FT_LONG_SIZE (current_objfile);
  while (loc < end)
    {
      loc_atom_code = target_to_host (loc, SIZEOF_LOC_ATOM_CODE, GET_UNSIGNED,
                      current_objfile);
      loc += SIZEOF_LOC_ATOM_CODE;
      switch (loc_atom_code)
    {
      case 0:
        /* error */
        loc = end;
        break;
      case OP_REG:
        /* push register (number) */
        stack[++stacki]
          = DWARF_REG_TO_REGNUM (target_to_host (loc, loc_value_size,
                             GET_UNSIGNED,
                             current_objfile));
        loc += loc_value_size;
        isreg = 1;
        break;
      case OP_BASEREG:
        /* push value of register (number) */
        /* Actually, we compute the value as if register has 0, so the
           value ends up being the offset from that register.  */
        offreg = 1;
        basereg = target_to_host (loc, loc_value_size, GET_UNSIGNED,
                      current_objfile);
        loc += loc_value_size;
        stack[++stacki] = 0;
        break;
      case OP_ADDR:
        /* push address (relocated address) */
        stack[++stacki] = target_to_host (loc, loc_value_size,
                          GET_UNSIGNED, current_objfile);
        loc += loc_value_size;
        break;
      case OP_CONST:
        /* push constant (number)   FIXME: signed or unsigned! */
        stack[++stacki] = target_to_host (loc, loc_value_size,
                          GET_SIGNED, current_objfile);
        loc += loc_value_size;
        break;
      case OP_DEREF2:
        /* pop, deref and push 2 bytes (as a long) */
        complain (&op_deref2, DIE_ID, DIE_NAME, stack[stacki]);
        break;
      case OP_DEREF4:    /* pop, deref and push 4 bytes (as a long) */
        complain (&op_deref4, DIE_ID, DIE_NAME, stack[stacki]);
        break;
      case OP_ADD:    /* pop top 2 items, add, push result */
        stack[stacki - 1] += stack[stacki];
        stacki--;
        break;
    }
    }
  return (stack[stacki]);
}

/*

LOCAL FUNCTION

    read_ofile_symtab -- build a full symtab entry from chunk of DIE's

SYNOPSIS

    static void read_ofile_symtab (struct partial_symtab *pst)

DESCRIPTION

    When expanding a partial symbol table entry to a full symbol table
    entry, this is the function that gets called to read in the symbols
    for the compilation unit.  A pointer to the newly constructed symtab,
    which is now the new first one on the objfile's symtab list, is
    stashed in the partial symbol table entry.
 */

static void
read_ofile_symtab (pst)
     struct partial_symtab *pst;
{
  struct cleanup *back_to;
  unsigned long lnsize;
  file_ptr foffset;
  bfd *abfd;
  char lnsizedata[SIZEOF_LINETBL_LENGTH];

  abfd = pst -> objfile -> obfd;
  current_objfile = pst -> objfile;

  /* Allocate a buffer for the entire chunk of DIE's for this compilation
     unit, seek to the location in the file, and read in all the DIE's. */

  diecount = 0;
  dbsize = DBLENGTH (pst);
  dbbase = xmalloc (dbsize);
  dbroff = DBROFF(pst);
  foffset = DBFOFF(pst) + dbroff;
  base_section_offsets = pst->section_offsets;
  baseaddr = ANOFFSET (pst->section_offsets, 0);
  if (bfd_seek (abfd, foffset, L_SET) ||
      (bfd_read (dbbase, dbsize, 1, abfd) != dbsize))
    {
      free (dbbase);
      error ("can't read DWARF data");
    }
  back_to = make_cleanup (free, dbbase);

  /* If there is a line number table associated with this compilation unit
     then read the size of this fragment in bytes, from the fragment itself.
     Allocate a buffer for the fragment and read it in for future
     processing. */

  lnbase = NULL;
  if (LNFOFF (pst))
    {
      if (bfd_seek (abfd, LNFOFF (pst), L_SET) ||
      (bfd_read ((PTR) lnsizedata, sizeof (lnsizedata), 1, abfd) !=
       sizeof (lnsizedata)))
    {
      error ("can't read DWARF line number table size");
    }
      lnsize = target_to_host (lnsizedata, SIZEOF_LINETBL_LENGTH,
                   GET_UNSIGNED, pst -> objfile);
      lnbase = xmalloc (lnsize);
      if (bfd_seek (abfd, LNFOFF (pst), L_SET) ||
      (bfd_read (lnbase, lnsize, 1, abfd) != lnsize))
    {
      free (lnbase);
      error ("can't read DWARF line numbers");
    }
      make_cleanup (free, lnbase);
    }

  process_dies (dbbase, dbbase + dbsize, pst -> objfile);
  do_cleanups (back_to);
  current_objfile = NULL;
  pst -> symtab = pst -> objfile -> symtabs;
}

/*

LOCAL FUNCTION

    psymtab_to_symtab_1 -- do grunt work for building a full symtab entry

SYNOPSIS

    static void psymtab_to_symtab_1 (struct partial_symtab *pst)

DESCRIPTION

    Called once for each partial symbol table entry that needs to be
    expanded into a full symbol table entry.

*/

static void
psymtab_to_symtab_1 (pst)
     struct partial_symtab *pst;
{
  int i;
  struct cleanup *old_chain;

  if (pst != NULL)
    {
      if (pst->readin)
    {
      warning ("psymtab for %s already read in.  Shouldn't happen.",
           pst -> filename);
    }
      else
    {
      /* Read in all partial symtabs on which this one is dependent */
      for (i = 0; i < pst -> number_of_dependencies; i++)
        {
          if (!pst -> dependencies[i] -> readin)
        {
          /* Inform about additional files that need to be read in. */
          if (info_verbose)
            {
              fputs_filtered (" ", gdb_stdout);
              wrap_here ("");
              fputs_filtered ("and ", gdb_stdout);
              wrap_here ("");
              printf_filtered ("%s...",
                       pst -> dependencies[i] -> filename);
              wrap_here ("");
              gdb_flush (gdb_stdout);        /* Flush output */
            }
          psymtab_to_symtab_1 (pst -> dependencies[i]);
        }
        }
      if (DBLENGTH (pst))        /* Otherwise it's a dummy */
        {
          buildsym_init ();
          old_chain = make_cleanup (really_free_pendings, 0);
          read_ofile_symtab (pst);
          if (info_verbose)
        {
          printf_filtered ("%d DIE's, sorting...", diecount);
          wrap_here ("");
          gdb_flush (gdb_stdout);
        }
          sort_symtab_syms (pst -> symtab);
          do_cleanups (old_chain);
        }
      pst -> readin = 1;
    }
    }
}

/*

LOCAL FUNCTION

    dwarf_psymtab_to_symtab -- build a full symtab entry from partial one

SYNOPSIS

    static void dwarf_psymtab_to_symtab (struct partial_symtab *pst)

DESCRIPTION

    This is the DWARF support entry point for building a full symbol
    table entry from a partial symbol table entry.  We are passed a
    pointer to the partial symbol table entry that needs to be expanded.

*/

static void
dwarf_psymtab_to_symtab (pst)
     struct partial_symtab *pst;
{

  if (pst != NULL)
    {
      if (pst -> readin)
    {
      warning ("psymtab for %s already read in.  Shouldn't happen.",
           pst -> filename);
    }
      else
    {
      if (DBLENGTH (pst) || pst -> number_of_dependencies)
        {
          /* Print the message now, before starting serious work, to avoid
         disconcerting pauses.  */
          if (info_verbose)
        {
          printf_filtered ("Reading in symbols for %s...",
                   pst -> filename);
          gdb_flush (gdb_stdout);
        }

          psymtab_to_symtab_1 (pst);

#if 0          /* FIXME:  Check to see what dbxread is doing here and see if
         we need to do an equivalent or is this something peculiar to
         stabs/a.out format.
         Match with global symbols.  This only needs to be done once,
         after all of the symtabs and dependencies have been read in.
         */
          scan_file_globals (pst -> objfile);
#endif

          /* Finish up the verbose info message.  */
          if (info_verbose)
        {
          printf_filtered ("done.\n");
          gdb_flush (gdb_stdout);
        }
        }
    }
    }
}

/*

LOCAL FUNCTION

    init_psymbol_list -- initialize storage for partial symbols

SYNOPSIS

    static void init_psymbol_list (struct objfile *objfile, int total_symbols)

DESCRIPTION

    Initializes storage for all of the partial symbols that will be
    created by dwarf_build_psymtabs and subsidiaries.
 */

static void
init_psymbol_list (objfile, total_symbols)
     struct objfile *objfile;
     int total_symbols;
{
  /* Free any previously allocated psymbol lists.  */

  if (objfile -> global_psymbols.list)
    {
      mfree (objfile -> md, (PTR)objfile -> global_psymbols.list);
    }
  if (objfile -> static_psymbols.list)
    {
      mfree (objfile -> md, (PTR)objfile -> static_psymbols.list);
    }

  /* Current best guess is that there are approximately a twentieth
     of the total symbols (in a debugging file) are global or static
     oriented symbols */

  objfile -> global_psymbols.size = total_symbols / 10;
  objfile -> static_psymbols.size = total_symbols / 10;
  objfile -> global_psymbols.next =
    objfile -> global_psymbols.list = (struct partial_symbol *)
      xmmalloc (objfile -> md, objfile -> global_psymbols.size
                 * sizeof (struct partial_symbol));
  objfile -> static_psymbols.next =
    objfile -> static_psymbols.list = (struct partial_symbol *)
      xmmalloc (objfile -> md, objfile -> static_psymbols.size
                 * sizeof (struct partial_symbol));
}

/*

LOCAL FUNCTION

    add_enum_psymbol -- add enumeration members to partial symbol table

DESCRIPTION

    Given pointer to a DIE that is known to be for an enumeration,
    extract the symbolic names of the enumeration members and add
    partial symbols for them.
*/

static void
add_enum_psymbol (dip, objfile)
     struct dieinfo *dip;
     struct objfile *objfile;
{
  char *scan;
  char *listend;
  unsigned short blocksz;
  int nbytes;

  if ((scan = dip -> at_element_list) != NULL)
    {
      if (dip -> short_element_list)
    {
      nbytes = attribute_size (AT_short_element_list);
    }
      else
    {
      nbytes = attribute_size (AT_element_list);
    }
      blocksz = target_to_host (scan, nbytes, GET_UNSIGNED, objfile);
      scan += nbytes;
      listend = scan + blocksz;
      while (scan < listend)
    {
      scan += TARGET_FT_LONG_SIZE (objfile);
      ADD_PSYMBOL_TO_LIST (scan, strlen (scan), VAR_NAMESPACE, LOC_CONST,
                   objfile -> static_psymbols, 0, cu_language,
                   objfile);
      scan += strlen (scan) + 1;
    }
    }
}

/*

LOCAL FUNCTION

    add_partial_symbol -- add symbol to partial symbol table

DESCRIPTION

    Given a DIE, if it is one of the types that we want to
    add to a partial symbol table, finish filling in the die info
    and then add a partial symbol table entry for it.

NOTES

    The caller must ensure that the DIE has a valid name attribute.
*/

static void
add_partial_symbol (dip, objfile)
     struct dieinfo *dip;
     struct objfile *objfile;
{
  switch (dip -> die_tag)
    {
    case TAG_global_subroutine:
      ADD_PSYMBOL_TO_LIST (dip -> at_name, strlen (dip -> at_name),
               VAR_NAMESPACE, LOC_BLOCK,
               objfile -> global_psymbols,
               dip -> at_low_pc, cu_language, objfile);
      break;
    case TAG_global_variable:
      ADD_PSYMBOL_TO_LIST (dip -> at_name, strlen (dip -> at_name),
               VAR_NAMESPACE, LOC_STATIC,
               objfile -> global_psymbols,
               0, cu_language, objfile);
      break;
    case TAG_subroutine:
      ADD_PSYMBOL_TO_LIST (dip -> at_name, strlen (dip -> at_name),
               VAR_NAMESPACE, LOC_BLOCK,
               objfile -> static_psymbols,
               dip -> at_low_pc, cu_language, objfile);
      break;
    case TAG_local_variable:
      ADD_PSYMBOL_TO_LIST (dip -> at_name, strlen (dip -> at_name),
               VAR_NAMESPACE, LOC_STATIC,
               objfile -> static_psymbols,
               0, cu_language, objfile);
      break;
    case TAG_typedef:
      ADD_PSYMBOL_TO_LIST (dip -> at_name, strlen (dip -> at_name),
               VAR_NAMESPACE, LOC_TYPEDEF,
               objfile -> static_psymbols,
               0, cu_language, objfile);
      break;
    case TAG_class_type:
    case TAG_structure_type:
    case TAG_union_type:
    case TAG_enumeration_type:
      /* Do not add opaque aggregate definitions to the psymtab.  */
      if (!dip -> has_at_byte_size)
    break;
      ADD_PSYMBOL_TO_LIST (dip -> at_name, strlen (dip -> at_name),
               STRUCT_NAMESPACE, LOC_TYPEDEF,
               objfile -> static_psymbols,
               0, cu_language, objfile);
      if (cu_language == language_cplus)
    {
      /* For C++, these implicitly act as typedefs as well. */
      ADD_PSYMBOL_TO_LIST (dip -> at_name, strlen (dip -> at_name),
                   VAR_NAMESPACE, LOC_TYPEDEF,
                   objfile -> static_psymbols,
                   0, cu_language, objfile);
    }
      break;
    }
}

/*

LOCAL FUNCTION

    scan_partial_symbols -- scan DIE's within a single compilation unit

DESCRIPTION

    Process the DIE's within a single compilation unit, looking for
    interesting DIE's that contribute to the partial symbol table entry
    for this compilation unit.

NOTES

    There are some DIE's that may appear both at file scope and within
    the scope of a function.  We are only interested in the ones at file
    scope, and the only way to tell them apart is to keep track of the
    scope.  For example, consider the test case:

        static int i;
        main () { int j; }

    for which the relevant DWARF segment has the structure:

        0x51:
        0x23   global subrtn   sibling     0x9b
                               name        main
                               fund_type   FT_integer
                               low_pc      0x800004cc
                               high_pc     0x800004d4

        0x74:
        0x23   local var       sibling     0x97
                               name        j
                               fund_type   FT_integer
                               location    OP_BASEREG 0xe
                                           OP_CONST 0xfffffffc
                                           OP_ADD
        0x97:
        0x4

        0x9b:
        0x1d   local var       sibling     0xb8
                               name        i
                               fund_type   FT_integer
                               location    OP_ADDR 0x800025dc

        0xb8:
        0x4

    We want to include the symbol 'i' in the partial symbol table, but
    not the symbol 'j'.  In essence, we want to skip all the dies within
    the scope of a TAG_global_subroutine DIE.

    Don't attempt to add anonymous structures or unions since they have
    no name.  Anonymous enumerations however are processed, because we
    want to extract their member names (the check for a tag name is
    done later).

    Also, for variables and subroutines, check that this is the place
    where the actual definition occurs, rather than just a reference
    to an external.
 */

static void
scan_partial_symbols (thisdie, enddie, objfile)
     char *thisdie;
     char *enddie;
     struct objfile *objfile;
{
  char *nextdie;
  char *temp;
  struct dieinfo di;

  while (thisdie < enddie)
    {
      basicdieinfo (&di, thisdie, objfile);
      if (di.die_length < SIZEOF_DIE_LENGTH)
    {
      break;
    }
      else
    {
      nextdie = thisdie + di.die_length;
      /* To avoid getting complete die information for every die, we
         only do it (below) for the cases we are interested in. */
      switch (di.die_tag)
        {
        case TAG_global_subroutine:
        case TAG_subroutine:
          completedieinfo (&di, objfile);
          if (di.at_name && (di.has_at_low_pc || di.at_location))
        {
          add_partial_symbol (&di, objfile);
          /* If there is a sibling attribute, adjust the nextdie
             pointer to skip the entire scope of the subroutine.
             Apply some sanity checking to make sure we don't
             overrun or underrun the range of remaining DIE's */
          if (di.at_sibling != 0)
            {
              temp = dbbase + di.at_sibling - dbroff;
              if ((temp < thisdie) || (temp >= enddie))
            {
              complain (&bad_die_ref, DIE_ID, DIE_NAME,
                    di.at_sibling);
            }
              else
            {
              nextdie = temp;
            }
            }
        }
          break;
        case TAG_global_variable:
        case TAG_local_variable:
          completedieinfo (&di, objfile);
          if (di.at_name && (di.has_at_low_pc || di.at_location))
        {
          add_partial_symbol (&di, objfile);
        }
          break;
        case TAG_typedef:
        case TAG_class_type:
        case TAG_structure_type:
        case TAG_union_type:
          completedieinfo (&di, objfile);
          if (di.at_name)
        {
          add_partial_symbol (&di, objfile);
        }
          break;
        case TAG_enumeration_type:
          completedieinfo (&di, objfile);
          if (di.at_name)
        {
          add_partial_symbol (&di, objfile);
        }
          add_enum_psymbol (&di, objfile);
          break;
        }
    }
      thisdie = nextdie;
    }
}

/*

LOCAL FUNCTION

    scan_compilation_units -- build a psymtab entry for each compilation

DESCRIPTION

    This is the top level dwarf parsing routine for building partial
    symbol tables.

    It scans from the beginning of the DWARF table looking for the first
    TAG_compile_unit DIE, and then follows the sibling chain to locate
    each additional TAG_compile_unit DIE.

    For each TAG_compile_unit DIE it creates a partial symtab structure,
    calls a subordinate routine to collect all the compilation unit's
    global DIE's, file scope DIEs, typedef DIEs, etc, and then links the
    new partial symtab structure into the partial symbol table.  It also
    records the appropriate information in the partial symbol table entry
    to allow the chunk of DIE's and line number table for this compilation
    unit to be located and re-read later, to generate a complete symbol
    table entry for the compilation unit.

    Thus it effectively partitions up a chunk of DIE's for multiple
    compilation units into smaller DIE chunks and line number tables,
    and associates them with a partial symbol table entry.

NOTES

    If any compilation unit has no line number table associated with
    it for some reason (a missing at_stmt_list attribute, rather than
    just one with a value of zero, which is valid) then we ensure that
    the recorded file offset is zero so that the routine which later
    reads line number table fragments knows that there is no fragment
    to read.

RETURNS

    Returns no value.

 */

static void
scan_compilation_units (thisdie, enddie, dbfoff, lnoffset, objfile)
     char *thisdie;
     char *enddie;
     file_ptr dbfoff;
     file_ptr lnoffset;
     struct objfile *objfile;
{
  char *nextdie;
  struct dieinfo di;
  struct partial_symtab *pst;
  int culength;
  int curoff;
  file_ptr curlnoffset;

  while (thisdie < enddie)
    {
      basicdieinfo (&di, thisdie, objfile);
      if (di.die_length < SIZEOF_DIE_LENGTH)
    {
      break;
    }
      else if (di.die_tag != TAG_compile_unit)
    {
      nextdie = thisdie + di.die_length;
    }
      else
    {
      completedieinfo (&di, objfile);
      set_cu_language (&di);
      if (di.at_sibling != 0)
        {
          nextdie = dbbase + di.at_sibling - dbroff;
        }
      else
        {
          nextdie = thisdie + di.die_length;
        }
      curoff = thisdie - dbbase;
      culength = nextdie - thisdie;
      curlnoffset = di.has_at_stmt_list ? lnoffset + di.at_stmt_list : 0;

      /* First allocate a new partial symbol table structure */

      pst = start_psymtab_common (objfile, base_section_offsets,
                      di.at_name, di.at_low_pc,
                      objfile -> global_psymbols.next,
                      objfile -> static_psymbols.next);

      pst -> texthigh = di.at_high_pc;
      pst -> read_symtab_private = (char *)
          obstack_alloc (&objfile -> psymbol_obstack,
                 sizeof (struct dwfinfo));
      DBFOFF (pst) = dbfoff;
      DBROFF (pst) = curoff;
      DBLENGTH (pst) = culength;
      LNFOFF (pst)  = curlnoffset;
      pst -> read_symtab = dwarf_psymtab_to_symtab;

      /* Now look for partial symbols */

      scan_partial_symbols (thisdie + di.die_length, nextdie, objfile);

      pst -> n_global_syms = objfile -> global_psymbols.next -
        (objfile -> global_psymbols.list + pst -> globals_offset);
      pst -> n_static_syms = objfile -> static_psymbols.next -
        (objfile -> static_psymbols.list + pst -> statics_offset);
      sort_pst_symbols (pst);
      /* If there is already a psymtab or symtab for a file of this name,
         remove it. (If there is a symtab, more drastic things also
         happen.)  This happens in VxWorks.  */
      free_named_symtabs (pst -> filename);
    }
      thisdie = nextdie;
    }
}

/*

LOCAL FUNCTION

    new_symbol -- make a symbol table entry for a new symbol

SYNOPSIS

    static struct symbol *new_symbol (struct dieinfo *dip,
                      struct objfile *objfile)

DESCRIPTION

    Given a pointer to a DWARF information entry, figure out if we need
    to make a symbol table entry for it, and if so, create a new entry
    and return a pointer to it.
 */

static struct symbol *
new_symbol (dip, objfile)
     struct dieinfo *dip;
     struct objfile *objfile;
{
  struct symbol *sym = NULL;

  if (dip -> at_name != NULL)
    {
      sym = (struct symbol *) obstack_alloc (&objfile -> symbol_obstack,
                         sizeof (struct symbol));
      memset (sym, 0, sizeof (struct symbol));
      SYMBOL_NAME (sym) = create_name (dip -> at_name,
                       &objfile->symbol_obstack);
      /* default assumptions */
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      SYMBOL_CLASS (sym) = LOC_STATIC;
      SYMBOL_TYPE (sym) = decode_die_type (dip);

      /* If this symbol is from a C++ compilation, then attempt to cache the
     demangled form for future reference.  This is a typical time versus
     space tradeoff, that was decided in favor of time because it sped up
     C++ symbol lookups by a factor of about 20. */

      SYMBOL_LANGUAGE (sym) = cu_language;
      SYMBOL_INIT_DEMANGLED_NAME (sym, &objfile -> symbol_obstack);
      switch (dip -> die_tag)
    {
    case TAG_label:
      SYMBOL_VALUE (sym) = dip -> at_low_pc;
      SYMBOL_CLASS (sym) = LOC_LABEL;
      break;
    case TAG_global_subroutine:
    case TAG_subroutine:
      SYMBOL_VALUE (sym) = dip -> at_low_pc;
      SYMBOL_TYPE (sym) = lookup_function_type (SYMBOL_TYPE (sym));
      SYMBOL_CLASS (sym) = LOC_BLOCK;
      if (dip -> die_tag == TAG_global_subroutine)
        {
          add_symbol_to_list (sym, &global_symbols);
        }
      else
        {
          add_symbol_to_list (sym, list_in_scope);
        }
      break;
    case TAG_global_variable:
      if (dip -> at_location != NULL)
        {
          SYMBOL_VALUE (sym) = locval (dip -> at_location);
          add_symbol_to_list (sym, &global_symbols);
          SYMBOL_CLASS (sym) = LOC_STATIC;
          SYMBOL_VALUE (sym) += baseaddr;
        }
      break;
    case TAG_local_variable:
      if (dip -> at_location != NULL)
        {
          SYMBOL_VALUE (sym) = locval (dip -> at_location);
          add_symbol_to_list (sym, list_in_scope);
          if (isreg)
        {
          SYMBOL_CLASS (sym) = LOC_REGISTER;
        }
          else if (offreg)
        {
          SYMBOL_CLASS (sym) = LOC_BASEREG;
          SYMBOL_BASEREG (sym) = basereg;
        }
          else
        {
          SYMBOL_CLASS (sym) = LOC_STATIC;
          SYMBOL_VALUE (sym) += baseaddr;
        }
        }
      break;
    case TAG_formal_parameter:
      if (dip -> at_location != NULL)
        {
          SYMBOL_VALUE (sym) = locval (dip -> at_location);
        }
      add_symbol_to_list (sym, list_in_scope);
      if (isreg)
        {
          SYMBOL_CLASS (sym) = LOC_REGPARM;
        }
      else if (offreg)
        {
          SYMBOL_CLASS (sym) = LOC_BASEREG_ARG;
          SYMBOL_BASEREG (sym) = basereg;
        }
      else
        {
          SYMBOL_CLASS (sym) = LOC_ARG;
        }
      break;
    case TAG_unspecified_parameters:
      /* From varargs functions; gdb doesn't seem to have any interest in
         this information, so just ignore it for now. (FIXME?) */
      break;
    case TAG_class_type:
    case TAG_structure_type:
    case TAG_union_type:
    case TAG_enumeration_type:
      SYMBOL_CLASS (sym) = LOC_TYPEDEF;
      SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE;
      add_symbol_to_list (sym, list_in_scope);
      break;
    case TAG_typedef:
      SYMBOL_CLASS (sym) = LOC_TYPEDEF;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, list_in_scope);
      break;
    default:
      /* Not a tag we recognize.  Hopefully we aren't processing trash
         data, but since we must specifically ignore things we don't
         recognize, there is nothing else we should do at this point. */
      break;
    }
    }
  return (sym);
}

/*

LOCAL FUNCTION

    synthesize_typedef -- make a symbol table entry for a "fake" typedef

SYNOPSIS

    static void synthesize_typedef (struct dieinfo *dip,
                    struct objfile *objfile,
                    struct type *type);

DESCRIPTION

    Given a pointer to a DWARF information entry, synthesize a typedef
    for the name in the DIE, using the specified type.

    This is used for C++ class, structs, unions, and enumerations to
    set up the tag name as a type.

 */

static void
synthesize_typedef (dip, objfile, type)
     struct dieinfo *dip;
     struct objfile *objfile;
     struct type *type;
{
  struct symbol *sym = NULL;

  if (dip -> at_name != NULL)
    {
      sym = (struct symbol *)
    obstack_alloc (&objfile -> symbol_obstack, sizeof (struct symbol));
      memset (sym, 0, sizeof (struct symbol));
      SYMBOL_NAME (sym) = create_name (dip -> at_name,
                       &objfile->symbol_obstack);
      SYMBOL_INIT_LANGUAGE_SPECIFIC (sym, cu_language);
      SYMBOL_TYPE (sym) = type;
      SYMBOL_CLASS (sym) = LOC_TYPEDEF;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, list_in_scope);
    }
}

/*

LOCAL FUNCTION

    decode_mod_fund_type -- decode a modified fundamental type

SYNOPSIS

    static struct type *decode_mod_fund_type (char *typedata)

DESCRIPTION

    Decode a block of data containing a modified fundamental
    type specification.  TYPEDATA is a pointer to the block,
    which starts with a length containing the size of the rest
    of the block.  At the end of the block is a fundmental type
    code value that gives the fundamental type.  Everything
    in between are type modifiers.

    We simply compute the number of modifiers and call the general
    function decode_modified_type to do the actual work.
*/

static struct type *
decode_mod_fund_type (typedata)
     char *typedata;
{
  struct type *typep = NULL;
  unsigned short modcount;
  int nbytes;

  /* Get the total size of the block, exclusive of the size itself */

  nbytes = attribute_size (AT_mod_fund_type);
  modcount = target_to_host (typedata, nbytes, GET_UNSIGNED, current_objfile);
  typedata += nbytes;

  /* Deduct the size of the fundamental type bytes at the end of the block. */

  modcount -= attribute_size (AT_fund_type);

  /* Now do the actual decoding */

  typep = decode_modified_type (typedata, modcount, AT_mod_fund_type);
  return (typep);
}

/*

LOCAL FUNCTION

    decode_mod_u_d_type -- decode a modified user defined type

SYNOPSIS

    static struct type *decode_mod_u_d_type (char *typedata)

DESCRIPTION

    Decode a block of data containing a modified user defined
    type specification.  TYPEDATA is a pointer to the block,
    which consists of a two byte length, containing the size
    of the rest of the block.  At the end of the block is a
    four byte value that gives a reference to a user defined type.
    Everything in between are type modifiers.

    We simply compute the number of modifiers and call the general
    function decode_modified_type to do the actual work.
*/

static struct type *
decode_mod_u_d_type (typedata)
     char *typedata;
{
  struct type *typep = NULL;
  unsigned short modcount;
  int nbytes;

  /* Get the total size of the block, exclusive of the size itself */

  nbytes = attribute_size (AT_mod_u_d_type);
  modcount = target_to_host (typedata, nbytes, GET_UNSIGNED, current_objfile);
  typedata += nbytes;

  /* Deduct the size of the reference type bytes at the end of the block. */

  modcount -= attribute_size (AT_user_def_type);

  /* Now do the actual decoding */

  typep = decode_modified_type (typedata, modcount, AT_mod_u_d_type);
  return (typep);
}

/*

LOCAL FUNCTION

    decode_modified_type -- decode modified user or fundamental type

SYNOPSIS

    static struct type *decode_modified_type (char *modifiers,
        unsigned short modcount, int mtype)

DESCRIPTION

    Decode a modified type, either a modified fundamental type or
    a modified user defined type.  MODIFIERS is a pointer to the
    block of bytes that define MODCOUNT modifiers.  Immediately
    following the last modifier is a short containing the fundamental
    type or a long containing the reference to the user defined
    type.  Which one is determined by MTYPE, which is either
    AT_mod_fund_type or AT_mod_u_d_type to indicate what modified
    type we are generating.

    We call ourself recursively to generate each modified type,`
    until MODCOUNT reaches zero, at which point we have consumed
    all the modifiers and generate either the fundamental type or
    user defined type.  When the recursion unwinds, each modifier
    is applied in turn to generate the full modified type.

NOTES

    If we find a modifier that we don't recognize, and it is not one
    of those reserved for application specific use, then we issue a
    warning and simply ignore the modifier.

BUGS

    We currently ignore MOD_const and MOD_volatile.  (FIXME)

 */

static struct type *
decode_modified_type (modifiers, modcount, mtype)
     char *modifiers;
     unsigned int modcount;
     int mtype;
{
  struct type *typep = NULL;
  unsigned short fundtype;
  DIE_REF die_ref;
  char modifier;
  int nbytes;

  if (modcount == 0)
    {
      switch (mtype)
    {
    case AT_mod_fund_type:
      nbytes = attribute_size (AT_fund_type);
      fundtype = target_to_host (modifiers, nbytes, GET_UNSIGNED,
                     current_objfile);
      typep = decode_fund_type (fundtype);
      break;
    case AT_mod_u_d_type:
      nbytes = attribute_size (AT_user_def_type);
      die_ref = target_to_host (modifiers, nbytes, GET_UNSIGNED,
                    current_objfile);
      if ((typep = lookup_utype (die_ref)) == NULL)
        {
          typep = alloc_utype (die_ref, NULL);
        }
      break;
    default:
      complain (&botched_modified_type, DIE_ID, DIE_NAME, mtype);
      typep = dwarf_fundamental_type (current_objfile, FT_INTEGER);
      break;
    }
    }
  else
    {
      modifier = *modifiers++;
      typep = decode_modified_type (modifiers, --modcount, mtype);
      switch (modifier)
    {
      case MOD_pointer_to:
        typep = lookup_pointer_type (typep);
        break;
      case MOD_reference_to:
        typep = lookup_reference_type (typep);
        break;
      case MOD_const:
        complain (&const_ignored, DIE_ID, DIE_NAME);  /* FIXME */
        break;
      case MOD_volatile:
        complain (&volatile_ignored, DIE_ID, DIE_NAME); /* FIXME */
        break;
      default:
        if (!(MOD_lo_user <= (unsigned char) modifier
          && (unsigned char) modifier <= MOD_hi_user))
          {
        complain (&unknown_type_modifier, DIE_ID, DIE_NAME, modifier);
          }
        break;
    }
    }
  return (typep);
}

/*

LOCAL FUNCTION

    decode_fund_type -- translate basic DWARF type to gdb base type

DESCRIPTION

    Given an integer that is one of the fundamental DWARF types,
    translate it to one of the basic internal gdb types and return
    a pointer to the appropriate gdb type (a "struct type *").

NOTES

    For robustness, if we are asked to translate a fundamental
    type that we are unprepared to deal with, we return int so
    callers can always depend upon a valid type being returned,
    and so gdb may at least do something reasonable by default.
    If the type is not in the range of those types defined as
    application specific types, we also issue a warning.
*/

static struct type *
decode_fund_type (fundtype)
     unsigned int fundtype;
{
  struct type *typep = NULL;

  switch (fundtype)
    {

    case FT_void:
      typep = dwarf_fundamental_type (current_objfile, FT_VOID);
      break;

    case FT_boolean:        /* Was FT_set in AT&T version */
      typep = dwarf_fundamental_type (current_objfile, FT_BOOLEAN);
      break;

    case FT_pointer:        /* (void *) */
      typep = dwarf_fundamental_type (current_objfile, FT_VOID);
      typep = lookup_pointer_type (typep);
      break;

    case FT_char:
      typep = dwarf_fundamental_type (current_objfile, FT_CHAR);
      break;

    case FT_signed_char:
      typep = dwarf_fundamental_type (current_objfile, FT_SIGNED_CHAR);
      break;

    case FT_unsigned_char:
      typep = dwarf_fundamental_type (current_objfile, FT_UNSIGNED_CHAR);
      break;

    case FT_short:
      typep = dwarf_fundamental_type (current_objfile, FT_SHORT);
      break;

    case FT_signed_short:
      typep = dwarf_fundamental_type (current_objfile, FT_SIGNED_SHORT);
      break;

    case FT_unsigned_short:
      typep = dwarf_fundamental_type (current_objfile, FT_UNSIGNED_SHORT);
      break;

    case FT_integer:
      typep = dwarf_fundamental_type (current_objfile, FT_INTEGER);
      break;

    case FT_signed_integer:
      typep = dwarf_fundamental_type (current_objfile, FT_SIGNED_INTEGER);
      break;

    case FT_unsigned_integer:
      typep = dwarf_fundamental_type (current_objfile, FT_UNSIGNED_INTEGER);
      break;

    case FT_long:
      typep = dwarf_fundamental_type (current_objfile, FT_LONG);
      break;

    case FT_signed_long:
      typep = dwarf_fundamental_type (current_objfile, FT_SIGNED_LONG);
      break;

    case FT_unsigned_long:
      typep = dwarf_fundamental_type (current_objfile, FT_UNSIGNED_LONG);
      break;

    case FT_long_long:
      typep = dwarf_fundamental_type (current_objfile, FT_LONG_LONG);
      break;

    case FT_signed_long_long:
      typep = dwarf_fundamental_type (current_objfile, FT_SIGNED_LONG_LONG);
      break;

    case FT_unsigned_long_long:
      typep = dwarf_fundamental_type (current_objfile, FT_UNSIGNED_LONG_LONG);
      break;

    case FT_float:
      typep = dwarf_fundamental_type (current_objfile, FT_FLOAT);
      break;

    case FT_dbl_prec_float:
      typep = dwarf_fundamental_type (current_objfile, FT_DBL_PREC_FLOAT);
      break;

    case FT_ext_prec_float:
      typep = dwarf_fundamental_type (current_objfile, FT_EXT_PREC_FLOAT);
      break;

    case FT_complex:
      typep = dwarf_fundamental_type (current_objfile, FT_COMPLEX);
      break;

    case FT_dbl_prec_complex:
      typep = dwarf_fundamental_type (current_objfile, FT_DBL_PREC_COMPLEX);
      break;

    case FT_ext_prec_complex:
      typep = dwarf_fundamental_type (current_objfile, FT_EXT_PREC_COMPLEX);
      break;

    }

  if (typep == NULL)
    {
      typep = dwarf_fundamental_type (current_objfile, FT_INTEGER);
      if (!(FT_lo_user <= fundtype && fundtype <= FT_hi_user))
    {
      complain (&unexpected_fund_type, DIE_ID, DIE_NAME, fundtype);
    }
    }

  return (typep);
}

/*

LOCAL FUNCTION

    create_name -- allocate a fresh copy of a string on an obstack

DESCRIPTION

    Given a pointer to a string and a pointer to an obstack, allocates
    a fresh copy of the string on the specified obstack.

*/

static char *
create_name (name, obstackp)
     char *name;
     struct obstack *obstackp;
{
  int length;
  char *newname;

  length = strlen (name) + 1;
  newname = (char *) obstack_alloc (obstackp, length);
  strcpy (newname, name);
  return (newname);
}

/*

LOCAL FUNCTION

    basicdieinfo -- extract the minimal die info from raw die data

SYNOPSIS

    void basicdieinfo (char *diep, struct dieinfo *dip,
               struct objfile *objfile)

DESCRIPTION

    Given a pointer to raw DIE data, and a pointer to an instance of a
    die info structure, this function extracts the basic information
    from the DIE data required to continue processing this DIE, along
    with some bookkeeping information about the DIE.

    The information we absolutely must have includes the DIE tag,
    and the DIE length.  If we need the sibling reference, then we
    will have to call completedieinfo() to process all the remaining
    DIE information.

    Note that since there is no guarantee that the data is properly
    aligned in memory for the type of access required (indirection
    through anything other than a char pointer), and there is no
    guarantee that it is in the same byte order as the gdb host,
    we call a function which deals with both alignment and byte
    swapping issues.  Possibly inefficient, but quite portable.

    We also take care of some other basic things at this point, such
    as ensuring that the instance of the die info structure starts
    out completely zero'd and that curdie is initialized for use
    in error reporting if we have a problem with the current die.

NOTES

    All DIE's must have at least a valid length, thus the minimum
    DIE size is SIZEOF_DIE_LENGTH.  In order to have a valid tag, the
    DIE size must be at least SIZEOF_DIE_TAG larger, otherwise they
    are forced to be TAG_padding DIES.

    Padding DIES must be at least SIZEOF_DIE_LENGTH in length, implying
    that if a padding DIE is used for alignment and the amount needed is
    less than SIZEOF_DIE_LENGTH, then the padding DIE has to be big
    enough to align to the next alignment boundry.

    We do some basic sanity checking here, such as verifying that the
    length of the die would not cause it to overrun the recorded end of
    the buffer holding the DIE info.  If we find a DIE that is either
    too small or too large, we force it's length to zero which should
    cause the caller to take appropriate action.
 */

static void
basicdieinfo (dip, diep, objfile)
     struct dieinfo *dip;
     char *diep;
     struct objfile *objfile;
{
  curdie = dip;
  memset (dip, 0, sizeof (struct dieinfo));
  dip -> die = diep;
  dip -> die_ref = dbroff + (diep - dbbase);
  dip -> die_length = target_to_host (diep, SIZEOF_DIE_LENGTH, GET_UNSIGNED,
                      objfile);
  if ((dip -> die_length < SIZEOF_DIE_LENGTH) ||
      ((diep + dip -> die_length) > (dbbase + dbsize)))
    {
      complain (&malformed_die, DIE_ID, DIE_NAME, dip -> die_length);
      dip -> die_length = 0;
    }
  else if (dip -> die_length < (SIZEOF_DIE_LENGTH + SIZEOF_DIE_TAG))
    {
      dip -> die_tag = TAG_padding;
    }
  else
    {
      diep += SIZEOF_DIE_LENGTH;
      dip -> die_tag = target_to_host (diep, SIZEOF_DIE_TAG, GET_UNSIGNED,
                       objfile);
    }
}

/*

LOCAL FUNCTION

    completedieinfo -- finish reading the information for a given DIE

SYNOPSIS

    void completedieinfo (struct dieinfo *dip, struct objfile *objfile)

DESCRIPTION

    Given a pointer to an already partially initialized die info structure,
    scan the raw DIE data and finish filling in the die info structure
    from the various attributes found.

    Note that since there is no guarantee that the data is properly
    aligned in memory for the type of access required (indirection
    through anything other than a char pointer), and there is no
    guarantee that it is in the same byte order as the gdb host,
    we call a function which deals with both alignment and byte
    swapping issues.  Possibly inefficient, but quite portable.

NOTES

    Each time we are called, we increment the diecount variable, which
    keeps an approximate count of the number of dies processed for
    each compilation unit.  This information is presented to the user
    if the info_verbose flag is set.

 */

static void
completedieinfo (dip, objfile)
     struct dieinfo *dip;
     struct objfile *objfile;
{
  char *diep;            /* Current pointer into raw DIE data */
  char *end;            /* Terminate DIE scan here */
  unsigned short attr;        /* Current attribute being scanned */
  unsigned short form;        /* Form of the attribute */
  int nbytes;            /* Size of next field to read */

  diecount++;
  diep = dip -> die;
  end = diep + dip -> die_length;
  diep += SIZEOF_DIE_LENGTH + SIZEOF_DIE_TAG;
  while (diep < end)
    {
      attr = target_to_host (diep, SIZEOF_ATTRIBUTE, GET_UNSIGNED, objfile);
      diep += SIZEOF_ATTRIBUTE;
      if ((nbytes = attribute_size (attr)) == -1)
    {
      complain (&unknown_attribute_length, DIE_ID, DIE_NAME);
      diep = end;
      continue;
    }
      switch (attr)
    {
    case AT_fund_type:
      dip -> at_fund_type = target_to_host (diep, nbytes, GET_UNSIGNED,
                        objfile);
      break;
    case AT_ordering:
      dip -> at_ordering = target_to_host (diep, nbytes, GET_UNSIGNED,
                           objfile);
      break;
    case AT_bit_offset:
      dip -> at_bit_offset = target_to_host (diep, nbytes, GET_UNSIGNED,
                         objfile);
      break;
    case AT_sibling:
      dip -> at_sibling = target_to_host (diep, nbytes, GET_UNSIGNED,
                          objfile);
      break;
    case AT_stmt_list:
      dip -> at_stmt_list = target_to_host (diep, nbytes, GET_UNSIGNED,
                        objfile);
      dip -> has_at_stmt_list = 1;
      break;
    case AT_low_pc:
      dip -> at_low_pc = target_to_host (diep, nbytes, GET_UNSIGNED,
                         objfile);
      dip -> at_low_pc += baseaddr;
      dip -> has_at_low_pc = 1;
      break;
    case AT_high_pc:
      dip -> at_high_pc = target_to_host (diep, nbytes, GET_UNSIGNED,
                          objfile);
      dip -> at_high_pc += baseaddr;
      break;
    case AT_language:
      dip -> at_language = target_to_host (diep, nbytes, GET_UNSIGNED,
                           objfile);
      break;
    case AT_user_def_type:
      dip -> at_user_def_type = target_to_host (diep, nbytes,
                            GET_UNSIGNED, objfile);
      break;
    case AT_byte_size:
      dip -> at_byte_size = target_to_host (diep, nbytes, GET_UNSIGNED,
                        objfile);
      dip -> has_at_byte_size = 1;
      break;
    case AT_bit_size:
      dip -> at_bit_size = target_to_host (diep, nbytes, GET_UNSIGNED,
                           objfile);
      break;
    case AT_member:
      dip -> at_member = target_to_host (diep, nbytes, GET_UNSIGNED,
                         objfile);
      break;
    case AT_discr:
      dip -> at_discr = target_to_host (diep, nbytes, GET_UNSIGNED,
                        objfile);
      break;
    case AT_location:
      dip -> at_location = diep;
      break;
    case AT_mod_fund_type:
      dip -> at_mod_fund_type = diep;
      break;
    case AT_subscr_data:
      dip -> at_subscr_data = diep;
      break;
    case AT_mod_u_d_type:
      dip -> at_mod_u_d_type = diep;
      break;
    case AT_element_list:
      dip -> at_element_list = diep;
      dip -> short_element_list = 0;
      break;
    case AT_short_element_list:
      dip -> at_element_list = diep;
      dip -> short_element_list = 1;
      break;
    case AT_discr_value:
      dip -> at_discr_value = diep;
      break;
    case AT_string_length:
      dip -> at_string_length = diep;
      break;
    case AT_name:
      dip -> at_name = diep;
      break;
    case AT_comp_dir:
      /* For now, ignore any "hostname:" portion, since gdb doesn't
         know how to deal with it.  (FIXME). */
      dip -> at_comp_dir = strrchr (diep, ':');
      if (dip -> at_comp_dir != NULL)
        {
          dip -> at_comp_dir++;
        }
      else
        {
          dip -> at_comp_dir = diep;
        }
      break;
    case AT_producer:
      dip -> at_producer = diep;
      break;
    case AT_start_scope:
      dip -> at_start_scope = target_to_host (diep, nbytes, GET_UNSIGNED,
                          objfile);
      break;
    case AT_stride_size:
      dip -> at_stride_size = target_to_host (diep, nbytes, GET_UNSIGNED,
                          objfile);
      break;
    case AT_src_info:
      dip -> at_src_info = target_to_host (diep, nbytes, GET_UNSIGNED,
                           objfile);
      break;
    case AT_prototyped:
      dip -> at_prototyped = diep;
      break;
    default:
      /* Found an attribute that we are unprepared to handle.  However
         it is specifically one of the design goals of DWARF that
         consumers should ignore unknown attributes.  As long as the
         form is one that we recognize (so we know how to skip it),
         we can just ignore the unknown attribute. */
      break;
    }
      form = FORM_FROM_ATTR (attr);
      switch (form)
    {
    case FORM_DATA2:
      diep += 2;
      break;
    case FORM_DATA4:
    case FORM_REF:
      diep += 4;
      break;
    case FORM_DATA8:
      diep += 8;
      break;
    case FORM_ADDR:
      diep += TARGET_FT_POINTER_SIZE (objfile);
      break;
    case FORM_BLOCK2:
      diep += 2 + target_to_host (diep, nbytes, GET_UNSIGNED, objfile);
      break;
    case FORM_BLOCK4:
      diep += 4 + target_to_host (diep, nbytes, GET_UNSIGNED, objfile);
      break;
    case FORM_STRING:
      diep += strlen (diep) + 1;
      break;
    default:
      complain (&unknown_attribute_form, DIE_ID, DIE_NAME, form);
      diep = end;
      break;
    }
    }
}

/*

LOCAL FUNCTION

    target_to_host -- swap in target data to host

SYNOPSIS

    target_to_host (char *from, int nbytes, int signextend,
            struct objfile *objfile)

DESCRIPTION

    Given pointer to data in target format in FROM, a byte count for
    the size of the data in NBYTES, a flag indicating whether or not
    the data is signed in SIGNEXTEND, and a pointer to the current
    objfile in OBJFILE, convert the data to host format and return
    the converted value.

NOTES

    FIXME:  If we read data that is known to be signed, and expect to
    use it as signed data, then we need to explicitly sign extend the
    result until the bfd library is able to do this for us.

 */

static unsigned long
target_to_host (from, nbytes, signextend, objfile)
     char *from;
     int nbytes;
     int signextend;        /* FIXME:  Unused */
     struct objfile *objfile;
{
  unsigned long rtnval;

  switch (nbytes)
    {
      case 8:
        rtnval = bfd_get_64 (objfile -> obfd, (bfd_byte *) from);
    break;
      case 4:
    rtnval = bfd_get_32 (objfile -> obfd, (bfd_byte *) from);
    break;
      case 2:
    rtnval = bfd_get_16 (objfile -> obfd, (bfd_byte *) from);
    break;
      case 1:
    rtnval = bfd_get_8 (objfile -> obfd, (bfd_byte *) from);
    break;
      default:
    complain (&no_bfd_get_N, DIE_ID, DIE_NAME, nbytes);
    rtnval = 0;
    break;
    }
  return (rtnval);
}

/*

LOCAL FUNCTION

    attribute_size -- compute size of data for a DWARF attribute

SYNOPSIS

    static int attribute_size (unsigned int attr)

DESCRIPTION

    Given a DWARF attribute in ATTR, compute the size of the first
    piece of data associated with this attribute and return that
    size.

    Returns -1 for unrecognized attributes.

 */

static int
attribute_size (attr)
     unsigned int attr;
{
  int nbytes;            /* Size of next data for this attribute */
  unsigned short form;        /* Form of the attribute */

  form = FORM_FROM_ATTR (attr);
  switch (form)
    {
      case FORM_STRING:        /* A variable length field is next */
        nbytes = 0;
    break;
      case FORM_DATA2:        /* Next 2 byte field is the data itself */
      case FORM_BLOCK2:        /* Next 2 byte field is a block length */
    nbytes = 2;
    break;
      case FORM_DATA4:        /* Next 4 byte field is the data itself */
      case FORM_BLOCK4:        /* Next 4 byte field is a block length */
      case FORM_REF:        /* Next 4 byte field is a DIE offset */
    nbytes = 4;
    break;
      case FORM_DATA8:        /* Next 8 byte field is the data itself */
    nbytes = 8;
    break;
      case FORM_ADDR:        /* Next field size is target sizeof(void *) */
    nbytes = TARGET_FT_POINTER_SIZE (objfile);
    break;
      default:
    complain (&unknown_attribute_form, DIE_ID, DIE_NAME, form);
    nbytes = -1;
    break;
      }
  return (nbytes);
}