home *** CD-ROM | disk | FTP | other *** search
- In the following, only commands enclosed within double quotes will be
- sent to the modem. Each string will be automatically followed by a
- carriage return. Change the single quotes to double quotes to enable
- any of the extra commands you desire.
-
- "at&F" start with factory defaults
-
- 'at&B1' 0 DTE/DTC rate follows connection rate
- 1 DTE/DTC rate fixed
-
- 'at&H1' 0 no transmit flow control
- 1 hardware flow control
- 2 software flow control
- 3 both
-
- 'at&K0' 0 disable data compression
- 1 enable if available
- 2 insist on compression
- 3 V42bis but not MNP5
-
- 'at&P1' 0 US pulse dialling
- 1 UK pulse dialling
-
- 'atX7' display all sorts of fancy messages
-
- 'at&A3' display more fancy messages
-
- "atS0=0" don't answer phone
-
- "atS2=128" disable +++ escape
-
- 'atS40=1' enable ATA command (USR Courier V32bis Australian)
-
- "at&C1" report true CD
-
- "at&d2" hang up on loss of DTR
-
- "at&W" save settings permanently
-
- 'atI4' show settings
-