home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Aztec Shareware Collection
/
SIMULATION.ISO
/
pro-ball
/
readme.1st
< prev
next >
Wrap
Text File
|
1993-07-19
|
2KB
|
51 lines
********* Welcome to Pro Football EDGE! *****************
Pro Football EDGE! is a comprehensive program for handicapping
NFL WINNERS and OVER/UNDER POINT TOTALS.
Requires: IBM Compatible, 512KB RAM, Color or Mono, 700 KB Disk Space
-- Dual floppy or single high density drive.
The installation process is automatic. Just type "install" on
the DOS Command line followed with a <RETURN> or <ENTER> key. Pro
Football EDGE! takes up about 400 KB of space and needs an
additional 300KB to operate. So if you have a hard drive, you
should definitely install it there.
If you have dual low density drives (360KB) then you will need 2
floppies and 2 working drives to install and use Pro Football EDGE!
After installation, move to the drive and directory containing
the installed pfe.exe file and type "pfe" <RETURN> on the DOS
Command line.
BLINKING TEXT: If any of the windows within Pro Football EDGE!
have "blinking" text then PFE! is incorrectly configured for your
monitor. To fix this simply type on the DOS command line:
"pfe m" if you have a MONOCHROME Montor
"pfe c" if you have a CGA COLOR Montor
"pfe v" if you have a EGA or VGA Montor
This only needs to be done one time. 9 times out 10 the "install"
program will accomplish this for you in the first place.
All necessary documentation is located right where you'll need
it -- in the software! With the context help and online
documentation included within Pro Football EDGE!, you should be able
to operate the software with relative ease.
If you have any problems, questions, or suggestions, I am very
willing to help out. Write to:
G & S Software Or call me at (602) 921-8560
PO Box 28391 Hours (1 - 9PM PST)
Tempe, AZ 85282-8391
Thanks and Enjoy.....
Gordon W. Grieb
Author of Pro Football EDGE!
Pro Football EDGE! Copyright 1992 G & S Software All Rights Reserved