home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Plus Leser 16
/
AmigaOS_LeserCD16_02.bin
/
CD_System
/
MUI
/
DOCS
/
Changes
next >
Wrap
Text File
|
1997-02-12
|
46KB
|
1,290 lines
************************************************************************
MUI - MagicUserInterface
(c) Copyright 1992-97 by Stefan Stuntz
This file describes all changes since version 1.0 of MUI
************************************************************************
------------------------------------------------------------------------
Version 3.8 (12-Feb-97) (muimaster.library V19.35)
------------------------------------------------------------------------
* MINOR SASG UPDATE *
Still not registered for MUI?
Check out www.sasg.com for great discounts NOW!
Changes for users:
- When tab-cycling through objects of a virtual group, MUI tries to
ensure that the surrounding active object frame is always visible.
- Added a little gimmick for registered users (OS 3.x required): Take a
digitized picture of yourself (approximately 80x100 pixels in size)
and copy it to "MUI:user.pic". MUI's preferences will then become a
little more personal :). Note that you can use any graphics format
(ilbm, gif, jpeg, etc) as long as you have a datatype to read it. In
other words: if you can view it with Multiview, MUI can display it
too. Take care that the picture is not too big, otherwise MUI might
fail to open the prefs window. Thanks again for supporting MUI and the
Amiga!
- Included new catalogs:
Portuguese by Fernando Nunes and Alexandre Gabriel
Spanish by Pedro Luis Mieza and Juan Antonio Ramirez
- Translations of PSI were still messed up. All catalog related problems
should finally be fixed now.
- Fixed a few more bugs concerning the appearance and refresh of help
bubbles.
- Fixed a possible deadlock that could occur when balancing objects were
used in certain combinations.
- Balancing could accidently mess up the display of active object frames.
- Implemented keyboard control for balance objects.
Changes for programmers:
- Reduced stack usage a little. Note well: this is no excuse for lazy
programmers! As mentioned in the MUI developer docs, the default stack
size of 4k is not enough for MUI programs! 8k is an acceptable
minimum. If you do not pay attention to this, your programs will
crash sooner or later!
- MUIA_Gauge_InfoText is now also possible for vertical gauge objects.
- Made MUIM_Window_Snapshot method public. See autodocs for details.
- MUI would accidently refuse to automatically move a listviews display
to the active entry, even though the MUIA_List_AutoJump flag was set.
------------------------------------------------------------------------
Version 3.7tu1 (30-Jan-97)
------------------------------------------------------------------------
* MINOR SASG UPDATE *
...just a few quick fixes...
- Listtree classes could crash under certain circumstances. This bug
affected MUI's preferences as well as other applications, eg IBrowse.
They should run well again with this fix.
- MUI would sometimes render a listview's contents outside of its box.
- PSI understands the new language catalogs.
- MUI's about window gives credit to the translators of the current
locale.
------------------------------------------------------------------------
Version 3.7 (24-Jan-97) (muimaster.library V18.174)
------------------------------------------------------------------------
* MINOR SASG UPDATE *
Still not registered for MUI yet? We set up something special to help
you support the Amigas future! Take your chance and play the unique
shareware lottery at http://www.sasg.com/
Order online and win some nice prices!
Changes for users:
- Included translations for many different languages. Many thanks to
the Amiga Translators Organisation and it's members for making this
possible:
Swedish Kristoffer Larsson, Mattias Gustafsson
Greek Pantelis Kopelias, Manos Konstantiniadis
French Georges Goncalves, Francis Labrie, Jérôme Fleury
Catalian Llorenç Grau, Esteve Boix
Danish Niels Bache, Bjarke Vangsgaard
Finnish Jan Karjalainen, Mika Lundell
Polish Konrad Dubiel, Marcin Orlowski
Czech Pavel Bures, Radovan Drazny
Italian Vincenzo Gervasi, Mario Dell'Oca
Netherlands Frank Mosch, Jeroen Steenblik
- Fixed a few minor problems with the appearance of help bubbles.
- Context menus were inaccessible in windows without other MUI objects.
- Window popup menu entries for snapshot/unsnapshot no longer appear on
windows without this capability.
- Increased stack size of mui preferences. The previous versions stack
was a little too small which sometimes caused MUI to crash.
- Recompilation with SAS-C 6.57 fixes potential problems with
060 processors.
- Improved middle mouse button scrolling in virtual groups. Holding
shift enhances speed by 2, control by 4 and alt by 8.
- Fixed enforcer hit in volumelist class.
- The MUI window popup menu now works even if there are string gadgets
below.
Changes for programmers:
- Using an empty string (not a NULL pointer!) as title for
a popup menu will result in a titleless popup menu.
- Fixed MUIA_Window_AltLeftEdge/TopEdge/Width/Height attributes.
- Fixed misbehaviour when input/eventhandlers were added/removed
from inbetween other input/eventhandlers.
- Fixed a problem when input & eventhandlers were modified from within
other input & eventhandlers.
- Improved performance of MUIM_Group_Init/ExitChange in windows with
many objects.
- If you call MUIM_Application_ShowHelp with a NULL filename, MUI will
use the contents of MUIA_Application_HelpFile instead.
- If you call MUIM_Application_ShowHelp with (Object *)0xffffffff as
window reference object, MUI will use the first open child window of
an application as reference for a display screen automatically.
- Implemented MUIM_Create/DeleteBubble methods (area class) to allow
programmer controlled bubble appearance. Useful e.g. for indicating
error conditions on data entry forms.
------------------------------------------------------------------------
Version 3.6 (20-Aug-96) (muimaster.library V17.63)
------------------------------------------------------------------------
* MINOR SASG UPDATE *
NOTE: Still not registered yet?
Go to http://www.sasg.com/ and get your MUI within a few hours!
Changes for users:
- Fixed another bug with string gadget activation/deactivation which
might have caused possible crashes of web browsers.
- Included a listview that shows versions of MUI custom classes in the
MUI about window.
Changes for programmers:
- Replaced the outdated custom class example Userdata.mcc by a more
uptodate custom class. This one also shows how to handle preferences
for custom classes.
- Fixed a bug that resulted in waiting for wrong signals when an input
handler with timer was used.
------------------------------------------------------------------------
Version 3.5 (26-Jul-96) (muimaster.library V16.160)
------------------------------------------------------------------------
* MINOR SASG UPDATE *
NOTES: More support and information is available from the official
MUI web site. Please visit us at http://www.sasg.com/
This version was not released to the public, it was only
distributed with the web browser IBrowse from Omnipresence.
Changes for users:
- Rewrote installer script. It will correctly update older MUI
distributions now instead of just renaming away the previous
directory. This allows additional classes and images to remain
installed after a MUI update.
- Fixed background rendering bug on cybergfx hi/truecolor screens.
- Fixed possible crash when disposing active string gadgets.
- Fixed positioning of window border scrollers after uniconfiy.
- Fixed version numbers of german catalog.
- Included builtin menu rendering for popup menus. Popups will
always appear above the corresponding gadget now instead of
relying on external patches for correct positioning.
- Fixed refresh of gadgets in virtual groups, i.e. browser
displays.
- Fixed rendering problems when TABbing away from a selected gadget.
- Controlling radio buttons is possible by clicking on the text
labels as well as on the actual buttons.
- Fixed major bug that lead to confused gadget appearance when changing
prefs on iconified applications.
- Removed a work-around for broken cybergfx picture.datatype. Note that
you will need at least picture.datatype 43.682 if you intend to
use background pattern on hi/truecolor cybergfx screens.
- Enhanced display speed in virtual groups, MUI based web browsers
perform better.
Changes for programmers:
- Implemented new input event handling system for custom classes.
This new system replaces the old and inflexible calls to
MUI_Request/RejectIDCMP(). See autodocs of MUIM_Window_AddEventHandler
for details.
- Improved remapping speed of bitmap class for images with more than
4 planes. However, better use datatypes (V43) to remap big images
instead of MUIs bitmap class.
- MUIM_List_Clear no longer hides a lists title.
- Setting MUIA_Draggable and MUIA_xxxWeight for group objects is no
longer forwarded to children.
- Fixed enforcer hit when dragging listview items with custom imagery.
- Fixed mungwall hit when string gadget were set to contents bigger
than their maximum length.
- Implemented MUIM_KillNotifyObj. See autodocs for details.
- Custom classes are also looked for and found in PRODGIR:mui/ now.
- MUI automatically falls back to traditional scrollers when window
border scrollers were chosen but not available for some reasons,
e.g. because the proper Window class attributes were not specified
or the muiwinscroller.class is missing.
- Support for NM_COMMANDSTRING menus in MUI_MakeObject(MUIO_MenuItem)
call. Also implemented MUIA_Menuitem_CommandString attributed for
Menuitem class. See autodocs for details.
- Implemented MUIA_Scrollgroup_HorizBar and MUIA_Scrollgroup_VertBar
attributes to access the scrollbars of a scrollgroup.
------------------------------------------------------------------------
Version 3.4 (01-Mar-96) (muimaster.library V15.93 )
------------------------------------------------------------------------
* non-published internal release *
------------------------------------------------------------------------
Version 3.3 (22-Feb-96) (muimaster.library V14.106)
------------------------------------------------------------------------
* MINOR SASG UPDATE *
Changes for users:
- Help bubbles no longer block an application.
- Fixed refresh bug of prop gadgets in virtual groups.
- Fixed ARexx command INFO SCREEN.
- MUI could crash after disposing an application when ARexx was used.
- Fixed refresh of color wheels.
- Fixed crash when using Coloradjust objects with Kick 2.x.
- Fixed double redraw after window resize.
Changes for programmers:
- Implemented MUIM_Application_AboutMUI,refwindow method to show MUIs
about window. Please include an "About MUI..." menu item in all your
programs.
- MUIA_String_Contents notification did not work on
AMIGA-X/C/V etc. string gadget clipboard hotkeys.
- Implemented MUIV_Listview_ScrollerPos_None to create listviews
without am attached scrollbar. You can create a scrollbar object,
place it anywhere in your window and connect it to the list (not
listview!) through notification. See autodocs of
MUIA_Listview_ScrollerPos for details.
- Fixed strange menu item return ID reports.
- Menuclass would not allow to set MUIA_Menu_Title. Instead, it
accidently checked for MUIA_Menuitem_Title. Now, it recognizes
both tags.
- Menu objects and Menuitem objects did not correctly update the
current menustrip when certain attributes (e.g. the title) were
changed.
- Creating Application objects without MUIA_Application_Title/Base/...
lead to very strange behaviour. Now, the application simply names
itself "UNNAMED".
- MUI_DisposeObject(NULL) would accidently crash the machine although
being documented as doing nothing.
NOTE: I strongly suggest to subscribe to the MUI mailing list. Only
here is the place to ask questions and make suggestions. Programming
serious MUI applications without support on this mailing list is nearly
impossible!
To subscribe, mail to mui-request@sunsite.informatik.rwth-aachen.de
with the single word "subscribe" (no quotes!) as subject (SUBJECT, not
message body!). You might want to send a HELP command to the server as
well. Thanks for your cooperation.
------------------------------------------------------------------------
Version 3.2 (31-Jan-96) (muimaster.library V13.686)
------------------------------------------------------------------------
* MINOR SASG UPDATE *
Changes for users:
- Rewrote some small critical parts in Assembler, MUI 3.2 should run
significantly faster than previous versions.
- Enhanced listview scrolling speed.
- Created custom root class which uses memory pools to allocate
objects. Reduces memory fragmentation and speeds up object
creation about 100%.
- Optmizied scrolling in virtual groups.
- Numeric buttons didn't draw their disabled state.
- Implemented keyboard control for scrollgroups.
- Implemented presets for Coloradjust objects. Presets are read
from mui:Presets/rgb.txt.
- Fixed 16 bytes memory leak.
- Fixed redrawing of prop gadgets.
- Fixed prop gadgets in listviews with lots of entries.
- Enhanced positioning of help bubble.
- Help bubbles and Drag&Drop messed up the display if CyberGraphX was
installed and the used screen was an ECS/AGA display mode with
interleaved bitmaps. Note well: If your bubbles are broken on
CyberGraphX screenmodes, be sure to use the *latest* version of
CyberGraphX from aminet.
- Rewrote PSI palette handling completely. Should be much easier to
use now. Included color presets as popup menus on the color page.
- Heavily reduced memory usage of string objects, optimized overall
memory consumption.
Changes for programmers:
- Implemented MUIA_List_PuddleSize, MUIA_List_ThreshSize and
MUIA_List_MemPool to control the pool created by a list object.
- Implemented scroll gadgets in window borders. See autodocs
of MUIA_Window_UseLeftBorderScroller, MUIA_Window_UseRightBorderScroller,
MUIA_Window_UseBottomBorderScroller and
MUIA_Prop_UseWinBorder, MUIA_Scrollgroup_UseWinBorder
for details.
- Implemented MUIM_Pendisplay_SetXXX methods to adjust defaults
of a pendisplay object.
- Implememted a timer in application class. See TIMER section
of MUIM_Application_AddInputHandler for details.
- Implemented MUIA_Application_WindowList. Getting this attribute
returns a pointer to a struct List which contains an applications
child windows. Use intuition.library/NextObject() to parse.
- Fixed get() of MUIA_Application_ForceQuit.
- Fixed MUIA_Text_HiChar with bold & italic texts.
- Fixed \033I[2,rrrrrrrr,gggggggg,bbbbbbbb] display bug which was
introduced in MUI 3.1.
- Reimplemented MUIA_Slider_Quiet.
- Implemented ESC P escape sequence to change pen for text strings.
Usage is like "This is \33P[17]color 17". Be sure to ObtainPen()
pens used like this.
- Fixed bug when bubbles or popup menus were used on windows
which's root object was not a group class object. Note that since MUI
plays some special tricks here, it is generally better to have the
root object of a window be a simple group class anyway. If you dont
need such a group in your window, use
MUIA_Window_RootObject, VGroup, Child, MyObj, End
instead of
MUIA_Window_RootObject, MyObj
- Fixed MUIM_Application_ShowHelp with V39 AmigaGuide library and
different help files.
- Fixed a very bad bug introduced in 3.1 that made applications crash
when MUIA_ShowMe was used on objects who's parent was the windows
root object.
- When an object is dropped somewhere outside a valid container,
the application object will receive a MUIM_DragDrop method. This
allows programs to take actions when MUI objects are e.g.
dropped on the Workbench.
- Fixed coordinate parameters of MUIM_DragDrop.
- Fixed OM_GET for MUIA_String_BufferPos and MUIA_String_DispPos.
- MUI 3.1 would accidently reopen windows which were closed during
an applications iconified state.
- Improved behaviour of MUIM_Application_Save/Load. You can override
the new methods MUIM_Export and MUIM_Import to export/import custom
data from your custom classes.
- Implemented MUIA_FillArea to avoid flickering when drawing custom classes.
------------------------------------------------------------------------
Version 3.1 (21-Nov-95) (muimaster.library V12.268)
------------------------------------------------------------------------
* MAJOR SASG UPDATE *
This is a major update. Please look at the information texts
in the preferences program for information on how to update your
registration.
Note: Almost everything in MUI changed, so this time, the changes
section does not describe everything in detail but is just like a
short overview.
Changes for users:
- To find a compromise between flexibility and resource usage, MUI 3
uses a completely new memory management concept. A lot of extra
features which are not necessarily needed to run applications have
been moved into external libraries. Most of these libraries are not
even loaded if MUI runs with its default settings. With this new
memory management, users have the the ability to control MUIs memory
usage by using appropriate configurations.
- MUI's speed has increased considerably compared with earlier versions.
This speedup depends on the machine MUI is running on: the slower the
Amiga, the more noticeable is the speed increase. Especially drawing
of GUI elements on ECS/AGA machines is a lot faster now due to a new
way of rendering. Even if a 7 MHz computer still can't be considered as
an optimum MUI platform, applications should perform a lot better now.
- The slow and bulky preferences system was completely rewritten, the
new way of handling settings is a lot clearer and more straight
forward. An applications local configuration is no longer adjusted
from the global preferences editor. Instead, all MUI applications
offer a way to open their private MUI settings window. This makes MUI
look more like an integral part of a program. Furthermore, the
settings windows are better structurized and offer easier access to
all configuration option.
- Public screen handling moved to an external program called "PSI"
(Public Screen Inspector). PSI fixes all known bugs of MUI 2.x
screens, is more easy to use and offers a few new features.
Furthermore, PSI can also be used independantly as screen manager for
non-MUI programs.
- All accompanying MUI programs make extensive use of brandnew MUI 3
programming features like dynamic object creations, balancing groups,
popup menus, Drag&Drop or Help bubbles. All those things have been
available on other operating systems for a long time, its about time
to get them to the Amiga.
Changes for programmers:
- Added so called "input handlers" which allow custom classes to
directly react on signal bits. See MUIM_AddInputHandler for details.
- You are encouraged to include a Settings/MUI... menu in your
application that does nothing but simply send a
MUIM_Application_OpenConfigWindow to your application object (see
psi.c).
- Implemented context sensitive popup menus. See autodocs of
MUIA_ContextMenu for details.
- Implemented custom layout groups. Positioning of children is
completely under programmers control. See new demo CustomLayout and
autodocs of MUIA_Group_LayoutHook for details.
- Changed layout behaviour of virtual groups. This should makes them
much more useful, especially together with the new custom layout
hooks. Performance was also increased. See autodocs of Virtgroup class
and Scrollgroup class for details.
- Implemented a Poppen class and new muimaster.library functions
MUI_ObtainPen() and MUI_ReleasePen(). Use this if your application
needs custom pens. See autodocs and demo Class2.c for details.
- Improved notification on MUIA_Window_InputEvent. See autodocs for
details.
- Fixed protection bits in dirlist objects MUIM_Dirlist_GetEntry.
- Implemented help bubbles. See MUIA_ShortHelp for details.
- Implemented MUIA_Parent attribute to ask an object about its parent
group.
- Included full source code of the new screen manager for educational
purposes. This little tool shows how to write good MUI programs. It
demonstrates several kinds of sub classes (windows, groups, lists),
drag & drop handling, dynamic object creation & linking, multi
threading, localization, help bubbles and much more. The screen
manager acts as a kind of standard MUI application, you can find lots
of important techniques and guidelines of MUI programming here. Forget
about the other demos, if you want to learn something, take the screen
manager. I want all of you to have a close look at the source and
drop your old-fashioned way of "ReturnID"-programming immediately.
It's time to get real object-oriented NOW! Don't be afraid of sub
classes, there isn't anything easier to work with.
- Implemented "disappearing" objects. Whenever a window is too small,
these objects are simply left out during layout calculations according
to their disappear level. This allows creation of complex and nice
GUIs while still remaining compatible with crappy 640x200 screens. See
autodocs of MUIA_HorizDisappear and MUIA_VertDisappear for details.
- Implemented "balancing" groups. See the Balancing demo and the
autodocs of the new BalanceClass for details.
- Implemented MUIM_Application_CheckRefresh method. You should call it
e.g. from IntuiMsgHooks of ASL-Requesters to ensure correct refreshing
of simple refresh type MUI windows. See autodocs and screen manager
source code for details.
- Implemented possibility to add objects to groups dynamically. See
autodocs of MUIM_Group_InitChange & MUIM_Group_ExitChange and screen
manager source code for details.
- Included simple brush2c program to help creating input for MUI's
Bitmap class. Source can be found in "MUI/Developer/C/Examples/",
usage examples are included in the screen manager's source code.
- Included classes to display tree structures.
- Introduced a new cycle chain system. All you have to do is to set
MUIA_CycleChain to 1 for every object that you want to have in your
chain, MUI does the rest automatically. The old
MUIM_Window_SetCycleChain will continue to work but is considered
obsolete.
- Implemented possibility to have custom builtin images in listviews.
No more need for external image files and other rubbish in your
applications. See psi.c ScreenList class and autodocs of
MUIM_List_CreateImage for details.
- Implemented full Drag&Drop facilities for all MUI objects. See
autodocs of MUIM_Drag#? in area class for details.
- Added a few new good-looking classes like level displays and turning
knobs. See slidorama demo for details.
- Rearranged class tree for slider-like classes that adjust numeric
values. See autodocs of numeric class and its subclasses for details.
- Implemented MUIM_Application_NewInput to improve behaviour of input
loops. MUIM_Application_Input will continue to work but is considered
obsolete.
- Implemented vertical bars in listviews with BAR/S switch for
MUIA_List_Format. See autodocs for details.
------------------------------------------------------------------------
Version 3.0 (10-Nov-95) (muimaster.library V11.3512)
------------------------------------------------------------------------
This was a special Computer 95 release and is not further documented.
------------------------------------------------------------------------
Version 2.3 (24-Dec-94) (muimaster.library V10.33)
------------------------------------------------------------------------
* MINOR SASG UPDATE *
Sorry, this update is a little smaller than usual. The reason is
simple, I was on a long holiday trip during the last months. :-)
Changes for users:
- Online help works again (but only synchronous) for 2.x systems.
- Improved smooth scrolling for listviews with many entries.
- Prefs program fits on an NTSC 640x200 screen with topaz/8.
- Popup hotkey is filtered in string gadget input.
Changes for programmers:
- MUIA_String_MaxLen is gettable.
- MUIA_ControlChar works for listview class.
- Dirlist object returns correct file dates.
- MUIA_Dirlist_Directory is get()able.
- Implemented MUIA_Window_MouseObject & MUIA_Window_NeedsMouseObject
attributes for immediate online help. See autodocs & Settings demo
for details.
- Added some support for the GCC compiler (include/inline/muimaster.h).
- Implemented MUIA_Listview_ScrollerPos tag to specify the position of
the scrollbar in a listview.
- Fixed some problems with string gadgets and attached lists.
- Implemented MUIA_Application_UseRexx/UseCommodities attributes.
Set to FALSE to disable the builtin ARexx/Commodities handling.
Don't do this unless you have a very good reason!
- Boopsi objects in virtual groups are handled like string gadgets,
they only appear when they're completely visible.
- Implemented MUIV_Notify_Self, MUIV_Notify_Window and
MUIV_Notify_Application special values to simplify notification
mechanism. See autodocs of notify class (MUIM_Notify) for details.
- Note: If you have questions or suggestions about MUI, please do
*not* ask me directly. Write to the MUI mailing list instead:
To subscribe, send mail to listserv@taloa.unice.fr with
an empty subject and a line containing the magic words
SUB mui Your Name
------------------------------------------------------------------------
Version 2.2 (08-Aug-94) (muimaster.library V9.80)
------------------------------------------------------------------------
* MINOR SASG UPDATE *
Changes for users:
- There were some misunderstandings about SASG update rules. Unless
otherwise stated, all MUI updates are MINOR SASG UPDATES, i.e.
you are not required to update your keyfile. Major updates (maybe
one at the end of this year) will be specifically announced and
the MUI prefs program will tell you about it.
- When starting two or more MUI applications at the same time, there
was a chance that the keyfile was not recognized correctly.
- Fixed some installation script problems.
- Fixed a possible crash in the registration program.
- MUI 2.1 was accidently documented to require OS 2.1, that's of
course a documentation bug. MUI continues to run with 2.0.
- The serial number of a registered user is displayed in the prefs
programs about window.
- Because the MUI 2.1 default settings for HalfShine and HalfShadow
pen caused some confusion, they are back to standard MagicWB
rules (color n-4 and n-3) again.
- Fixed a bug in coloradjust class which caused wrong public screen
colors with V37.
- AmigaGuide online help works asynchronous for all MUI applications.
- Fixed some problems of listviews in virtual groups. Unfortunately,
some other problems are still there.
- Fixed cycle gadget lockup problem.
- Made window handling a bit more sensitive, MUI windows will now
look correctly even with non standard system gadget sizes.
- Prefs program terminates when receving a CTRL-C signal.
- Popup objects are controllable with a configurable hotkey.
See MUI-Prefs keyboard adjustment listview.
Changes for programmers:
- Autodocs for MUI_Redraw() didn't mention the important
fact that calling DoSuperMethod() is always the first
step in a custom classes MUIM_Draw method. Otherwise,
msg->flags is not set properly.
- Result of MUI_Redraw() changed from APTR to VOID.
- AppIcon notification works again.
- Implemented one-dimension virtual groups, useful e.g. for
button rows. See autodocs of MUIA_Scrollgroup_FreeHoriz and
MUIA_Scrollgroup_FreeVert for details.
- Getting MUIA_Disabled didn't work in previous releases.
- MUIA_Slider_Min und MUIA_Slider_Max are settable.
- Building subclasses of MUIC_Window is possible.
- Notify on MUIA_List_Entries works.
- Implemented MUIM_List_Move method to simplify moving entries
in a list. See autodocs for details.
- Implemented MUIA_Boopsi_Smart tag for better handling of "smart"
Boopsi classes, i.e. the freely distributable "editor.gadget".
- Implemented MUIM_NoNotifySet method for better handling of
bidirectional notifications (i.e. scrollbar - editorgadget).
- Implemented MUIA_List_InsertPosition to query position of
last inserted entry.
- Implemented MUIV_List_Remove_Selected for list class remove
method.
- Menuitem objects export & import their CHECKED state with
MUIM_Application_Save and MUIM_Application_Load.
- It's possible to include register groups in cycle chains.
- Implemented MUIA_Popobject_WindowHook to allow adjusting
cycle chains, default objects, etc. for popup objects.
- Programmers, please update "MUI.readme" in your distributions!
------------------------------------------------------------------------
Version 2.1 (03-Jul-94) (muimaster.library V8.697)
------------------------------------------------------------------------
* MINOR SASG UPDATE *
I planned to have a lot more new things for V2.1. Unfortunately, time
was missing. Next versions of MUI will probably be split into a basic
muimaster.library and a muifancy.library. The fancy library will hold
all the additional features, users with low memory or slow machines may
decide to leave out this stuff. For more infos, see the "Future" file
in the developer archive.
Changes for users:
- From version 2.1 on, MUI is distributed under the rules of the SASG,
the Standardized Amiga Shareware Group. See the accompanying program
"Registration" for details.
- Screen preferences were not saved correctly sometimes.
- When changing the application with the preferences program,
MUI offers the possibility to use/save changed settings.
- Sliders can be configured to have their info text at the left side.
- Listview multiselect mode was sometimes triggered accidently.
- Enhanced popup menu configuration possibilities, including
custom background and frame settings and animated appearance.
- Removed the startup and shutdown command config options.
Changes for programmers:
- Implemented MUIV_NotTriggerValue. See autodocs of MUIM_Notify for
details.
- Fixed some autodoc syntax bugs, added version information for every
class and attribute.
- Implemented MUIA_Application_ForceQuit. See autodocs for details.
- Invisible or disabled objects don't trigger MUIA_AppMessage
notification anymore.
- Fixed Dirlist class problems with short directory names.
- When MUI fails to open a window, notifications on MUIA_Window_Open
are not triggered anymore.
- Fixed a little memory eating bug.
- Added a "often used object" collection to muimaster.library. You
should use this collection as frequently as possible instead of
building your own objects or using the supplied macros. See
autodocs of MUI_MakeObject() for details.
- Simplified the creation of labels with underscore. This makes
localization much easier. See autodocs of MUI_MakeObject()
for details.
- Added object oriented menus. See new demo program and autodocs of
menustrip, menu and menu item class for details.
- Controlling a slider object with keyboard accidently triggered
notification twice.
- Fixed problems when language specific special characters were
used as shortcut.
- Included documentation on how to write external public
custom classes. See developer docs and new examples in
"MUI/Developer/C/Examples/Classes" for details.
- Fixed a crash when the colorwheel.gadget was not available under V39.
- Implemented new builtin classes MUIC_Poplist, MUIC_Bitmap and
MUIC_Bodychunk. Just a few bytes of code but very useful.
- Rewrote some critical parts of MUI in assembler.
- Fixed a problem when MUIA_ShowMe was used on groups.
- Implemented MUIA_Window_FancyDrawing for highspeed programs.
- Fixed some notification bugs for register objects.
------------------------------------------------------------------------
Version 2.0 (11-Feb-94) (muimaster.library V7.973)
------------------------------------------------------------------------
Changes for users:
- Rearranged libraries. Classes which are needed by all applications or
which are very small are integrated in muimaster.library. Fancy and
rarely used classes come as external files. This speeds up starting
the first MUI application and simplifies installation procedure for
commercial applications.
- Integration of classes increases performance significantly.
- Rearranged the prefs program completely. Major changes include
"single application" mode, image multiselect, presets and localization.
I cannot list all the other news here in detail, but together they should
make adjusting preferences a lot easier.
- Included beautiful new 8 color images, patterns and button designs from
Martin "MagicWB" Huttenloher. Give them a try!
- Fixed several screenmode requester bugs.
- Fixed problems with crazy going prop gadgets.
- Changed "active object" display. No more ugly active background but
instead a nice extra frame will be displayed.
- Getting the name of the used public screen is possible with
new ARexx command "info screen".
- Documented ARexx command error result codes.
Changes for programmers:
- More detailed developer documentation including information about
writing custom classes and a MUI style guide. Read it!
- Included new demos "ClassN" to show how to implement custom
classes.
- Added the ability to specify a listview multiselect type directly.
See MUIA_Listview_MultiSelect attribute for details.
- The MUIA_ShowMe attribute can be used to hide objects. Using this
attribute is even possible in open windows, hiding object will
then cause a new layout to take place. When necessary, the parent
window will be resized automatically. Included new demo program
"ShowHide".
- Implemented popstring, popasl, popobject classes for asynchronous
popups. popasl class is the recommended way to include file/font/etc.
requesters. Included new demo program "Popup" to demonstrate the new
popup classes.
- Added a register class. No, this is not for registrating your MUI,
its used to create flexible titled page groups. See the prefs
program and the pages demo for details.
- Added the ability to specify a listview multiselect type directly.
See MUIA_Listview_MultiSelect attribute for details.
- Implemented MUIM_List_InsertSingle method.
- Multiline entries ("foo\nbar") in a cycle gadget were not handled
correctly.
- Implemented MUIA_Rectangle_HBar and MUIA_Rectangle_VBar to create
nice single border lines.
- Implemented MUIM_MultiSet method, MUIA_NoNotify attribute and
MUIM_KillNotify method for notify class.
- Implemented MUIA_Gauge_InfoText attribute.
- Implemented MUIA_Listview_ClickColumn, MUIA_Listview_DefClickColumn.
- Fixed problem with MUIA_Application_Iconified notification.
- Implemented MUIV_List_Select_All for MUIM_List_Select method.
- Fixed some problems with sleeping windows and applications.
- MUIA_List_First and MUIA_List_Visible are really get()able.
- Fixed a problem with keyboard control for MUIA_Slider_Quiet sliders,
implemented MUIA_Slider_Reverse tag.
- Tag value and documentation for MUIA_List_Title attribute was
missing.
- Specifying images with "1:x" never worked, use "6:x" instead.
See MUIA_Image_Spec for details.
- MUI_Request() gadgets may contain '_' characters to indicate keyboard
shortcuts.
- Implemented MUIA_Application_RexxHook.
- Implemented MUIA_String_EditHook.
------------------------------------------------------------------------
Version 1.4 (27-Oct-93) (muimaster.library V6.435)
------------------------------------------------------------------------
From V1.4 on, MUI is distributed in two separate archives:
muiXXusr.lha - libraries, classes, demos, user documentation.
muiXXdev.lha - programmer interfaces and programmer documentation.
Changes for users:
- Important Note:
Due to some enhancements in image processing, registered users will
have to readjust their image settings. Otherwise some images might
not be visible!
- I accept every currency for registration now. Please read the
registration section of the manual for details.
- Rearranged preferences program. Instead of many different windows,
page groups are used and should make things a lot easier.
- Implemented palette gadget for public screens.
- Added the possibility to use an RGB color as image (V39 and above).
- Implemented background pattern for screens (V39 and above).
- Background pictures allocate their colors correctly (V39 and above).
- Gauge frame and radio button spacing didn't work.
- Reduced flicker when resizing a window with a fancy background.
- Added configuration switch for window redraw type. Possible settings
are fast/ugly and slow/nice. Defaults to fast/ugly, which isn't really
really ugly but maybe faster.
- Added special screen type to address the frontmost public screen.
- Speeded up first drawing of a window.
- Fixed some simple refresh problems with page groups.
- Iconify Gadget wasn't visible on a one plane display.
- Improved text rendering speed about 20% (maybe even more if you have
some data cache).
- Made cycle popups blazingly fast and more configurable (frame setting).
- One gadget requesters can always be answered with the [Press] key.
- Two gadget requesters can always be answered with 'y' for the left
and 'n' for the right gadget.
- Requester buttons sometimes were layouted with no intermediate
spacing.
- Scrolling a partially obscured listview in a simple refresh window
would create some pixel garbage.
- Reasonably speeded up listview drawing, cursor handling and multi
selecting. Together with keyboard scrolling, display is even faster
if a listview's height is exactly a multiple of its line height.
- Implemented configuration switch for full line listviews. These
listviews won't show incomplete lines are and are somewhat
faster. Default are full line listviews.
- Fixed some public screen open and close problems.
- Tab size in floattext class was handled wrong.
- Eliminated first and last line flicker when scrolling listviews.
- Rearranged and rewrote parts of the documentation.
- Please read the manuals "Discussion" section before reporting
any problems!
Changes for programmers:
- Attention... very powerful feature... :-)
Implemented virtual (scrolling) groups. Included new program
"Virtual" for demonstration.
- New color oriented classes: Colorfield, Coloradjust, Palette.
- Fixed vertical slider problem.
- Trying to create an object from a non existing class caused an
enforcer hit.
- Enabling a group containing prop/string gadgets didn't really enable
the gadgets.
- Implemented MUIM_WriteString and MUIM_WriteLong methods for easy
structure updating.
- Implemented MUIA_ControlChar for slider objects.
- MUIA_Group_ActivePage didn't trigger notification.
- Fixed some minor text engine bugs.
- During the execution of a MUIM_CallHook in a notify method,
other MUI tasks were locked.
- Implemented MUIA_Version and MUIA_Revision attributes to allow
version checking for applications.
- The number of the current entry is passed to a list display
hook as additional parameter.
- Setting a boopsi gadgets attributes didn't cause a display update.
- Setting MUIA_Background wouldn't always update the display.
- Children of MUIA_Group_SameXXXX groups could accidently be enlarged
beyond their maximum size.
- Implemented MUIA_Application_BrokerPri attribute.
- Implemented MUIA_Application_BrokerPort attribute. This port can
e.g. be used to add additional HotKeys with the HotKey() amiga.lib
function.
- Recognizing a press/release of a prop gadget is possible by
listening to the MUIA_Prop_Pressed attribute.
- Adding and removing members of groups could accidently change
the groups orientation.
- Implemented some new standard images concerning tape deck and network
issues.
- MUIM_Application_Get/SetMenuCheck didn't work.
- Some Modula and Oberon interface changes.
- Implemented MUIA_Slider_Quiet tag to hide the number output.
- Implemented MUIA_Dirlist_MultiSelDirs attribute.
- Implemented MUIA_Window_PublicScreen tag to force opening windows
on certain public screens.
- Implemented MUIM_List_NextSelected to help stepping through selected
entries of a list.
- Implemented MUIA_List_Title attribute to support titles for
(multi columned) lists.
- MUIA_List_Active wasn't reported during a MUIM_List_Clear.
- MUIA_List_Active was reported twice during a MUIM_List_Remove.
- MUIA_Boopsi_Object didn't trigger notification.
- Implemented default sizes for all classes. New windows will
be opened using these default sizes instead of
MUIV_Window_Width/Height_MinMax(10).
- Menu multi select didn't work.
- Autodocs are alphabetically sorted now.
------------------------------------------------------------------------
Version 1.3 (29-Aug-93) (muimaster.library V5.141)
------------------------------------------------------------------------
- MUIA_String_Secret string gadgets crashed on an 68000.
- Corrected assembler includes.
- Fixed bug with MUIA_Window_ActiveObject.
------------------------------------------------------------------------
Version 1.2 (28-Aug-93) (muimaster.library V5.140)
------------------------------------------------------------------------
- Fixed enforcer hits in ARexx HELP command.
- Setting MUIA_Background did not refresh the display.
- Added validity check on key description strings in prefs program.
- Initializing string or prop gadgets with MUIA_Disabled didn't really
disable the gadget.
- Fixed some sync problems with MUIA_String_Integer.
- Menu checkmarks would disappear when a window was closed and reopened.
- Specifying a non existing font caused windows to disappear.
- Included Manx, Assembler, Modula, Oberon and Amiga-E interfaces.
- Implemented MUIA_Window_Screen attribute. This allows opening a
MUI window on an explicitly defined intuition screen.
- Rewrote the image caching mechanism. This should fix some bugs
and system crashes with non existing external image files.
- Fixed a bad bug that could trash the stack under certain
circumstances.
- MUIA_Selected didn't work at object creation time.
- Better MOUSEMOVE and INTUITICKS handling to improve performance.
- Using simple refresh windows would sometimes freeze the system.
- Attention... very powerful feature... :-)
Implemented two new attributes for group class:
MUIA_Group_PageMode (TRUE/FALSE) this group is a page group.
MUIA_Group_ActivePage (0...numchilds-1) this child shall be displayed.
Page groups always show exactly one of their childs. The number of
this child can be changed dynamically, even in an open window.
New demo "Pages" demonstrates the new page groups.
- Included AppWindow support. See MUIA_Window_AppWindow,
MUIA_Application_DropObject and MUIA_AppMessage for details.
New demo "AppWindow" for demonstration.
- Bumped version number of all libs to 5. You must not mix MUI
classes and libraries with different version numbers, this
will lead into problems. Revision numbers are uncritical.
Note: This does not affect applications. They will of course
work with all MUI releases, as long as all version numbers
are identical.
- Included version number checking. MUI will refuse to open
classes when the class version doesn't match the master
library. Note: when I'm sure about internal class communication
(maybe in a few months...), this check will become obsolete.
------------------------------------------------------------------------
Version 1.1 (15-Aug-93) (muimaster.library V4.58)
------------------------------------------------------------------------
- Removed a remaining serial debug output.
- Corrected installation script for 2.x systems.
- Corrected HELP: assign of "StartMeFirst" script.
- Corrected some autodocs and header file bugs.
- Added system configuration switch to adjust window refresh
type, possibilities are simple refresh and smart refresh.
- Made some changes to the Oberon interface.
- String gadgets with an invisible font ate some bytes of memory.
- Fixed some bugs with failing boopsi images.
- Some minor changes to some of the demo programs.
- Speeded object creation about 10%.
- For boopsi image implementors: boopsi images now have the ability
to specify a desired minimum and maximum size. See "mui.h"
for details.
- Implemented MUIA_Window_DefaultObject attribute. See autodocs
for details.
- Added some new boopsi images.
- Implemented MUIA_ControlChar for radio buttons. Pressing
the control char will activate the next (shift -> previous)
radio button element.
- Implemented MUIA_ControlChar for string gadgets. Pressing
the control char will activate the gadget.
- Added some more keyboard shortcuts to the prefs program.
- Minimum width for MUIA_Window_SizeRight windows was calculated wrong.
- Last characters of some text fields were not displayed with
certain fonts.
------------------------------------------------------------------------
Version 1.0 (08-Aug-93) (muimaster.library V4.4)
------------------------------------------------------------------------
- Initial Release.