home *** CD-ROM | disk | FTP | other *** search
-
-
- NetBSD-Amiga COMPATIBLITY LIST
- ==============================
-
-
- Updated on:
-
- 17th January, 1994
-
-
- Maintained by:
-
- Stefan G. Berg
-
- sgberg@charon.bloomington.in.us
-
-
-
-
- 1. Does NetBSD support my device?
-
- This section lists all the hardware-devices, which are known to
- work or NOT to work with NetBSD (see comments).
-
- IMPORTANT NOTE: PLEASE HELP TO UPDATE THIS LIST BY PROVIDING
- COMMENTS AND NEW INFO. IN RETURN, I WILL POST UPDATES AND TRY TO MAKE
- THE LIST AVAILABLE TO ANYONE INTERESTED.
-
- IMPORTANT DISCLAIMER: This list is not guaranteed to be 100%
- correct.
-
-
-
- 1.1. Supported Harddisks
-
- Currently, only SCSI controllers are supported, but support for
- IDE- or AT-drives is being worked on.
-
- If your harddisk is connected via SCSI, please report if it works
- in both, async and sync-mode.
-
- Note that the comments are left out, if the device works fine and
- reliable!
-
-
-
- Name: DEC DSP3105
-
- Capacity: 1 GB
-
- Interface: SCSI-1
-
- Hostadapter: A3000-intern
-
- Informant: mtk@eunet.ch
-
-
-
-
- Name: Fujitsu 2023F
-
- Capacity: 405MB
-
- Interface: SCSI-1
-
- Hostadapter: Internal 3091.
-
- Informant: markus@TechFak.Uni-Bielefeld.DE
-
-
-
-
- Name: Fujitsu M2624FA
-
- Capacity: 520 MB
-
- Approx Cost: about or less than 1000 DEM (1 USD = 1,70 DEM)
-
- Interface: FAST-SCSI
-
- Hostadapter: A2091
-
- Informant: hubert.feyrer@rrzc1.rz.uni-regensburg.de
-
- Comments: Works fine in sync-mode.
-
-
-
-
- Name: IBM OEM 0663E15 rev 5 51
-
- Capacity: 1.2 GB
-
- Interface: SCSI-1
-
- Hostadapter: A3000-internal
-
- Informant: Jarkko.Hietaniemi@hut.fi
-
- Comments: needs sync mode
- (still, with 730 about 1/6 of boots fails due to
- timeout)
-
-
-
-
- Name: Maxtor 340
-
- Capacity: 340MB (322MB formatted)
-
- Approx Cost: $360 US
-
- Interface: SCSI-1
-
- Hostadapter: A3000-internal
-
- Informant: leland@wacky.acet.org
-
-
-
-
- Name: Micropolis 1684-7 (CDC 94171-9)
-
- Capacity: 313 MB
-
- Interface: SCSI-1
-
- Hostadapter: A3000-internal
-
- Informant: phb@colombo.telesys-innov.fr
-
-
-
-
- Name: Quantum P40S
-
- Capacity: 40MB
-
- Interface: SCSI-1
-
- Hostadapter: GVP G-Force 030/25MHz
-
- Informant: petrin@mits.mdata.fi
-
-
-
-
- Name: Quantum P52S
-
- Capacity: 52 MB
-
- Interface: SCSI
-
- Hostadapter: A2091
-
- Informant: hubert.feyrer@rrzc1.rz.uni-regensburg.de
-
- Comments: When replacing my ST1096N by this drive, I got
- lots of timeouts, the system was NOT useable. Better
- stickin' to my slow but reliable Seagate! Note that I
- have the WD-Proto-chip. I don't know if it works with
- the -08 version.
-
-
-
-
- Name: Quantum P80S
-
- Capacity: 80MB
-
- Interface: SCSI-1
-
- Hostadapter: A2091
-
- Informant: markus@TechFak.Uni-Bielefeld.DE
-
-
-
-
- Name: Quantum LPS105
-
- Capacity: 105MB
-
- Interface: SCSI-1
-
- Hostadapter: Internal 3091.
-
- Informant: markus@TechFak.Uni-Bielefeld.DE
-
-
-
-
- Name: Quantum PD210S
-
- Capacity: 200MB
-
- Interface: SCSI-1
-
- Hostadapter: A3000-internal
-
- Informant: phb@colombo.telesys-innov.fr
-
-
-
-
- Name: Quantum 240
-
- Capacity: 240MB
-
- Approx Cost: 520 DEM (1 USD ~ 1,68 DEM)
-
- Interface: SCSI-1
-
- Hostadapter: A3000-internal
-
- Informant: chammer@dave.hrz.uni-bielefeld.de
-
-
-
-
- Name: Quantum ProDrive PD425S (rev 606)
-
- Capacity: 405 MB
-
- Interface: SCSI-1
-
- Hostadapter: GVP 4008
-
- Informant: Alain.Chofardet@scinfo.u-nancy.fr
-
-
-
-
- Name: Quantum ProDrive 525LPS
-
- Capacity: 501 MB
-
- Approx Cost: $600 US
-
- Interface: SCSI-1
-
- Hostadapter: GVP Impact Series II
-
- Informant: sgberg@charon.bloomington.in.us
-
-
-
-
- Name: Seagate ST1096N
-
- Capacity: 80 MB
-
- Interface: SCSI
-
- Hostadapter: A2091
-
- Informant: hubert.feyrer@rrzc1.rz.uni-regensburg.de
-
- Comments: Had no problems ever with this drive, but note that it
- isn't the fastest drive at all (23 ms).
-
-
-
-
- Name: Seagate ST2383W (Imprimis 94241-7 Rev 127)
-
- Capacity: 318 MB
-
- Interface: SCSI-1
-
- Hostadapter: A3000-internal
-
- Informant: phb@colombo.telesys-innov.fr
-
-
-
-
- Name: Seagate ST2502-N (Imprimis 94241-7 Rev 083)
-
- Capacity: 416 MB
-
- Interface: SCSI-1
-
- Hostadapter: A3000-internal
-
- Informant: phb@colombo.telesys-innov.fr
-
-
-
-
- Name: Seagate ST3390N
-
- Capacity: 340MB
-
- Interface: SCSI-2 FAST
-
- Hostadapter: GVP G-Force 030/25MHz
-
- Informant: petrin@mits.mdata.fi
-
-
-
-
- Name: Syquest 40MB
-
- Capacity: 40MB
-
- Interface: SCSI-1
-
- Hostadapter: A2091
-
- Informant: markus@TechFak.Uni-Bielefeld.DE
-
-
-
-
- Name: Western Digital Piranha
-
- Capacity: 200MB
-
- Interface: SCSI-2
-
- Hostadapter: A3000-internal
-
- Informant: chammer@dave.hrz.uni-bielefeld.de
-
- Comments: Works, but not that fast (~200MB/sec), sync & async-mode
-
-
-
-
- Name: Wren7
-
- Capacity: 1 GB
-
- Interface: SCSI-1
-
- Hostadapter: A3000-intern
-
- Informant: mtk@eunet.ch
-
-
-
-
- 1.2. Supported Streamer
-
- Supported streamers are:
-
-
- Name: Archive Python, Dat-Streamer
-
- Capacity: 2 GB (without compression)
-
- Interface: SCSI-1
-
- Hostadapter: A3000-intern
-
- Informant: mtk@eunet.ch
-
- Comments: Works fine, no problems
-
-
-
-
- Name: Archive Viper 2525
-
- Capacity: QIC525/QIC320/QIC250/QIC120 (R/W), QIC24 (read only)
-
- Approx Cost: $500 US
-
- Interface: SCSI-1
-
- Hostadapter: A3000-intern
-
- Informant: leland@wacky.acet.org
-
-
-
-
- Name: Caliper (Streamer, Commodore external streamer)
-
- Capacity: 150 MB
-
- Interface: SCSI-1
-
- Hostadapter: A3000-internal
-
- Informant: phb@colombo.telesys-innov.fr
-
-
-
-
- Name: Tandberg TDC 3600
-
- Capacity: QIC-250/QIC-150 (R/W), QIC-120/QIC-24 (read only)
-
- Approx Cost: $200 US (refurbished)
-
- Interface: SCSI-1
-
- Hostadapter: GVP Impact Series II
-
- Informant: sgberg@charon.bloomington.in.us
-
-
-
-
- Name: Wangtek
-
- Capacity: 150 MB
-
- Interface: SCSI-1
-
- Hostadapter: A3000-intern
-
- Informant: mtk@eunet.ch
-
- Comments: Works fine, no problems
-
-
-
-
-
- Name: WANGTEK 5525ES (board assembly 33711-XXX PCBA)
-
- Capacity: up to 525 MB (QIC-320/525, QIC-150/250, QIC-24)
-
- Approx Cost: ~1050 DM (german marks - internal)
-
- Interface: SCSI
-
- Hostadapter: A3000 internal
-
- Informant: Marquart.C.Fanz@zfe.siemens.de
-
- Comments: Tape drive does not function with standard NETBSD
- kernel, because of the mode select commmand in file
- sys/arch/amiga/dev/st.c. The drive is set to SCSI-1
- with SCSI-2 response data format on default and does
- not accept the mode selcet command in the ..init (?)
- function.
-
- Comment out the mode select call will do it for NETBSD
- because the drive automatically recognize the size of
- the tape cartridge. I am using 150/250 tape cartridges
- with NETBSD. Only 'mt' doesn't work (unknown type 15)
- i.e. density 0x0F QIC-320/525. I am working on the
- correct mode select for this drive (and for general
- tape setup for ANSI X3.131-1986 (SCSI-1) and SCSI-2
- (Revision 10k) when I find the time.
-
- SCSI-2 might go, but because WANGTEK has switched to
- new ACA (advanced common architecture, i.e. no SCSI
- select jumper any more) I don't know how to switch to
- SCSI-2.
-
-
-
- 1.3. Ethernet-Card
-
- The origional ethernet-card from Commodore, A2065 aka
- Amistar-Board and the LanRover from ASDG are known to work. Reported
- by markus@TechFak.Uni-Bielefeld.de and
- stefanb@lurker.dfv.rwth-aachen.de.
-
-
-
- 1.4. Graphics-Cards
-
- Name: Retina
-
- Capacity: 2 MB
-
- Informant: mtk@eunet.ch
-
- Comments: Works fine both in console and X11, no problems
-
-
-
- 1.5. Misc Hardware
-
- Name: A2091, rev. 6.6, WD-Proto-Chip, HD-Controller
-
- Capacity: 1MB RAM
-
- Interface: SCSI
-
- Informant: hubert.feyrer@rrzc1.rz.uni-regensburg.de
-
-
-
-
- Name: CD300 from Apple
-
- Approx Cost: 725 DEM (German Marks, 1 USD ~ 1,68 DEM)
-
- Informant: chammer@dave.hrz.uni-bielefeld.de
-
- Comments: The ISOFS-implementation in the current NetBSD-release
- has a bug in dealing with Rockridge links.
-
-
-
-
- Name: NEC CDR-74 CD-ROM
-
- Capacity: 640MB
-
- Interface: SCSI
-
- Hostadapter: A3000-internal
-
- Informant: mtk@eunet.ch
-
- Comments: Works fine, no problems.
-
-
-
-
- Name: Ricoh RS 3100E (external MO-Drive)
-
- Capacity: 128 MB
-
- Approx Cost: 1800 DEM (German Marks, 1 USD ~ 1,70 DEM)
-
- Interface: SCSI
-
- Hostadapter: A3000 internal, AMD 33C93
-
- Informant: lkv@mania.robin.de
-
- Comments: Works fine in sync-mode, currently I boot
- & run NetBSD from a MO-medium (faster than
- expected!)
-
-
-
-
- 1.6. Complete Systems
-
- A500, GVP11 Impact HD+ 105/8MB, CSA Derringer 030/882 4MB
-
-
- A500, 2MB Chip, GVP Impact Series II HD+ 8MB, PPI-040/28MHz 4MB,
- Quantum 525LPS, Tandberg TDC 3600, SupraFaxModem V.32bis
-
-
- A2000 w/ GVP 50 MHz Combo accelerator, 8MB 32-bit RAM
-
-
- A2000, GVP G-Force 68EC030/882/25Mhz + 5MB, Golem 4/8 MB 16-bit FAST,
- Seagate ST3990N 340MB drive connected to G-Force, Quantum P40S
- 40MB drive connected to Supra Wordsync (no driver for Supra yet,
- so this drive is not used with NetBSD). The 68EC030 seems to
- have a working MMU.
-
-
-