home *** CD-ROM | disk | FTP | other *** search
- Path: rcfnews.cs.umass.edu!barrett
- From: christon@powertech.no (Christopher Naas)
- Newsgroups: comp.sys.amiga.reviews
- Subject: REVIEW: Sony Trinitron Multiscan 17sf monitor
- Followup-To: comp.sys.amiga.hardware
- Date: 7 Aug 1995 20:53:00 GMT
- Organization: The Amiga Online Review Column - ed. Daniel Barrett
- Lines: 267
- Sender: amiga-reviews@math.uh.edu (comp.sys.amiga.reviews moderator)
- Distribution: world
- Message-ID: <405ufc$fhd@kernighan.cs.umass.edu>
- Reply-To: christon@powertech.no (Christopher Naas)
- NNTP-Posting-Host: snoopy.cs.umass.edu
- Keywords: hardware, monitor, multiscan, commercial
- Originator: barrett@snoopy.cs.umass.edu
-
-
-
- PRODUCT NAME
-
- Sony Trinitron Multiscan 17sf monitor
-
-
- BRIEF DESCRIPTION
-
- A 17" Trinitron Multiscan monitor for the 31.5 to 64kHz range.
-
-
- AUTHOR/COMPANY INFORMATION
-
- Name: Sony Deutschland GmbH
- Address: Hugo Eckener Str. 20 50829 Kvln
- Deutschland
-
- [Sony also has branches in many other countries.]
-
-
- LIST PRICE
-
- I bought mine here in Norway for around $1600.
-
-
- SPECIAL HARDWARE AND SOFTWARE REQUIREMENTS
-
- HARDWARE
-
- A 23-pin to 15-pin RGB adaptor (like the one included with
- Amiga 4000, or a graphics-card with a 15-pin out-connector.
-
-
- SOFTWARE
-
- AmigaDOS 3+ monitor drivers that push the display frequency
- up to the range the monitor can handle, or graphics card
- drivers that do the same.
-
-
- COPY PROTECTION
-
- None.
-
-
- MACHINE USED FOR TESTING
-
- Amiga 4000T with 25MHz 68040 CPU
- 2MB Chip, 12 MB Fast RAM
- Kickstart 40.68 (3.1) Workbench 40.42 (3.1)
- Standard Commodore-supplied RGB adaptor.
- CyberVision 64bit graphics card with 4MB onboard memory.
-
-
- INSTALLATION
-
- Select the appropriate monitordriver in ScreenModePrefs and save.
- Power off and plug in the monitor, power on, and you're in business. The
- power lead is a standard 3-pin thing as found on most computer appliances
- these days (including the A4000). If you have a cable with such plugs in
- both ends, you can plug it directly into the main pass-through on the back
- of the A4000. If not, you will have to use the supplied standard power cable.
-
-
- REVIEW
-
- I picked up my monitor at a dealer 60 kilometers from my house. The
- first thing that popped into my mind when I saw the box was "Wow, this thing
- is *huge*!". And the box it came in really is huge. So big, in fact, that I
- couldn't get it into the taxi on my way home. Anyway, when I finally got the
- thing home and unpacked it, I found that the box also contained quite a bit
- of padding. ;)
-
- But still, upgrading to a 17" monitor, even from my old 15" IDEK was
- shock. The display is really a lot bigger than it used to be, which is nice,
- of course.
-
- The 17sf is a beautiful looking beast. In comparison, my old IDEK
- truly was the Beast whilst my new Sony is definitely Beauty. It is difficult
- to describe the appearance, but I'll give it a shot. It has a very flat
- screen. Flatter than my old IDEK 15" Multiflat, in fact. :) There's about 4-5
- cm. gray plastic around the edges of the screen. On the bottom, there is a
- "sunken" control panel with buttons for Color, Geometry, Size and Center,
- and a "raised" control panel with up-down-left-right buttons, a power LED, a
- power save LED and the On/Off button.
-
- The 17sf has digital control, thus the buttons. No "wheels" to turn
- around; you just hold in the buttons. I will explain the controls in detail
- later.
-
- After unpacking it and breaking my back lifting it onto my desk, I
- plugged it into the Commodore RGB adaptor on the back of my A4000T, and
- turned on the power. I was greeted by a rather bulky looking 720x564 DBLPAL
- screen. The 17sf has a .25 dotpitch, and thus lower resolutions and
- few-color gradients look like crap. It is excellent for higher resolutions
- and lots of color, though, and chances are you have that if you're investing
- in a 17" monitor.
-
- As I mentioned earlier, it scans from 31.5 to 64kHz, and from 50 to
- 120Hz. You would think this excludes most Amiga resolutions, but luckily it
- manages to scan below these ranges, so you can use the following AGA
- resolutions:
-
- DBLPAL
- DBLNTSC
- Euro36
- MultiScan
- Euro72
-
- Super72, Pal, NTSC and A2024 are not displayable.
-
- Using the Size and Center settings, I managed to eliminate the "black
- borders" you normally get with most monitors in the above resolutions, and
- get the picture to fill the entire screen. Big plus.
-
- I guess if you fiddle enough with MonEd, you could push Super72 up
- to a working kHz as well. I never tried.
-
- I used DBLPAL for about a month before I got my CyberVision. Screen
- switching is as fast as you could possibly want, both with AGA and CyberGFX
- displays.
-
- I now use a 1120x832 Workbench screen. That is the biggest resolution
- I can display while keeping above the 72Hz mark. I am also able to display
- 800x600 in 100Hz, 1280x1024 in 52Hz and 1600x1200 in 50Hz, all flicker free,
- of course. Making new resolutions with CyberMode is easy, and the 17sf
- happily displays them as long as they keep within the scan area.
-
- In a monitor test in PCWorld, the Sony Trinitron Multiscan 15sf came
- out on top. The 15sf is essentially the same monitor as the 17sf, only with
- a smaller screen, so the same goes for the 17sf, I guess. It was stated as
- having a better dot pitch than all the other monitors, better color and
- better screen control.
-
- Here's a rundown of the available controls:
-
- The "lowered" panel acts as a switchboard for what you want to set.
- The "raised" panel with the up, down, left, right buttons increases or
- decreases the values of the currently selected "control mode".
-
- If you press the "Color" button. "Left" and "Right" switch between
- the maximum and minimum values, while "Up" and "Down" are gradual.
-
- If you press the "Geom" button, you can rotate the display slightly
- to the left or to the right with the "Up" and "Down" buttons, while "Left"
- and "Right" gives/removes the "barrel" effect.
-
- If you press the "Size" button, "Up" and "Down" size the display
- vertically, while "Left" and "Right" size it horizontally.
-
- If you press the "Center" button, you center the picture on the
- screen ;)
-
- If you haven't selected a "control mode", "Left" and "Right" control
- contrast, and "Up" and "Down" control brightness.
-
- When you have reached the maximum values, the PowerSave led blinks to
- let you know there's no point in holding down the button any longer. You
- can leave a "control mode" by pressing the button again, and there's also a
- timer, which switches it of automatically after a few seconds of inactivity.
-
- All values are saved for the current screen. The 17sf can store 10
- user defined modes, and has preset values for the 6 most popular modes in
- the PC world. If you have filled up the memory with 10 modes and set a new
- one, the first one is replaced with the new one.
-
- Here are the specifications:
-
- Picture tube: 0.25mm aperture grille pitch, 17 inches measured
- diagonally (16" maximum viewing image) 90-degree
- deflection
- Video image area: Approx. 328 x 242 mm (w/h)
- (13 x 9 5/8 inches)
- Logical resolution: Horizontal: Max 1280 dots
- Vertical: Max 1024 lines
- Physical resolution: Horizontal: Max 1280 dots
- Vertical: Max 1024 lines
- Standard image area: Approx 300 x 225 mm (w/h)
- (11 7/8 x 8 7/8 inches)
- Deflection frequency: Horizontal: 31.5 to 64kHz
- Vertical: 50 to 120Hz
- AC input voltage/current
- 100 to 120V, 50/60 Hz, 1.8A
- 220 to 240V, 50 - 60Hz, 1A
- Dimensions: 406 x 426.5 x 451 mm (w/h/d)
- (16 x 16 7/8 x 17 7/8 inches)
- Mass: Approx. 19.0kg (41lb 14oz)
-
- It comes with a tilt swivel, which is extremely easy-floating. This
- is a good thing, since the monitor is quite heavy. My old IDEK had a rather
- hard swivel. I can't imagine lifting the 17sf every time I want to move the
- swivel like I had to do with the IDEK.
-
-
- DOCUMENTATION
-
- An A4 size stapled booklet with good instructions in English, French,
- German, Spanish and Italian.
-
-
- LIKES
-
- I like the sharp and clear picture quality. The best I have seen on
- any monitor to date. I also like the fact that I can display 1600x1200
- flicker-free even though the documentation states that 1280x1024 is the
- maximum resolution. The controls are extremely easy to operate, and I have
- found that the displaymode memory has proven to be invaluable. I wouldn't
- like to have to fiddle with the controls every time I used a different
- display mode.
-
-
- DISLIKES AND SUGGESTIONS
-
- I have no dislikes. This is an excellent product.
-
-
- COMPARISON TO OTHER SIMILAR PRODUCTS
-
- It leaves all other monitors I've seen way behind. The easy controls,
- extremely crisp and clear display and high dotpitch are excellent compared
- to my old IDEK.
-
-
- VENDOR SUPPORT
-
- I have had no reason to contact the vendor.
-
-
- WARRANTY
-
- There is a one year dealer warranty (as required by Norwegian law).
- The manual does not mention a factory warranty, but I think my dealer said
- something about 30 days.
-
-
- CONCLUSIONS
-
- This is the best monitor I've ever seen. It came out on top of both
- the Brilliance and Nec monitors in the PCWorld test, and I can understand
- why. It might not be the cheapest monitor available, but if you want a big
- display and the best colors money can buy, it is a safe bet. Coupled with my
- CyberVision, it is excellent for both graphics and DTP.
-
- I give it 4.8 stars out of 5. Mo product is perfect, and there are
- always others that are better (although at a much higher cost).
-
-
- COPYRIGHT NOTICE
-
- Copyright 1995 Christopher Naas. All rights reserved. This review
- is freely distributable. You can contact me by mailing me at:
- christon@powertech.no
-
-
- __ __ Christopher Landmark Naas < EML: christon@powertech.no
- /_ /_ /\ Reg. Amiga Developer > WWW: http://www.powertech.no/~christon/
- __/__//_/ Fusing the clear threat! < IRC: KarmaComa
-
-
- ---
-
- Daniel Barrett, Moderator, comp.sys.amiga.reviews
- Send reviews to: amiga-reviews-submissions@math.uh.edu
- Request information: amiga-reviews-requests@math.uh.edu
- Moderator mail: amiga-reviews@math.uh.edu
- Anonymous ftp site: math.uh.edu, in /pub/Amiga/comp.sys.amiga.reviews
-