Crawly Crypt Collection 2/crawlyvol2.bin/utility/utility.lst

File List | 1995-03-20 | 133KB | 1,852 lines

    ***********************************************************************
   **        T h e   C r a w l y   C r y p t   C o l l e c t i o n        **
   *                            P r e s e n t s                            *
   **                          Utility  Programs                          **
    ***********************************************************************

   *************************************************************************
   **                         Atari ST Archivers                          **
   **                         /UTILITY/ARCHIVER/                          **
   *************************************************************************

4PAK      "4 PAK" - the TOS/PRG file compactor.  This program packer is similar
          in function to other popular packers like the Atomic packer, etc.
          Using 4 PAK, you can expect to pack files by around 60% with 4PAK. It
          is also frighteningly fast at unpacking.  Please note, 4PAK will not
          compress all PRG/TOS files.  If there are problems with the GEM
          header, 4PAK will not compress the file.
A2LSWTC2  A2LSWTCH.PRG (ARC.TTP to LHARC.TTP Switcher!) by Jan Dembowski.  This
          program allows people who use LHARC and ARC to switch back and forth
          between the two compression methods with the least amount of effort.
          You can now convert all your *.ARC files to *.LZH oor vice-versa!
ARC2LZH3  ARC <-> LZH version 3.0 by Wayne Watson.  The author wanted to
          automate the process of converting ARC files to the LZH format. So he
          created this little shell program.  This utility makes converting
          your ARCs to LZH format a snap!  FREEWARE!
ARCGSH41  Archiver GEM Shell version 4.1 by Rainer Klute.  Arcgsh is a GEM
          shell that eases the use of the most popular archiving programs for
          the Atari ST (arc, lharc, shar, tar, and zoo).  Furthermore the
          programs compress, uud, and uue are supported.  You can use your
          favorite file viewer and your favorite editor from Arcgsh without any
          need to leave the program.  Docs provided in both English and German
          in Tex format.
ARCLIST2  ARCLIST version 0.9 by Kevin Whitham will search downward from either
          the current drive/path looking for ARCed files.  All files found will
          have their contents written out to a file named "ARC_DATA.TXT".
          ARC.TPP must be in the same directory for this program to work.
ARCLZH63  Archiv-Lister ST version 6.3 by Stephan Slabihoud - the archive
          lister and unpacker utility for all Atari users.  Supports the
          following formats: ARC, ARJ, LZH, LZS, MOD, TRE, ZIP, ZOO.  This
          program is SHAREWARE.  All docs are in German.
ARCSHL30  ARC Shell version 3.0 by Charles F. Johnson is a GEM program which is
          designed to work with the popular ST archiving utilities ARC and
          LHARC (LZH).  Essentially, ARC Shell adds a GEM interface to the
          archiver programs, letting you point and click to select the various
          options instead of typing a command line.  ARC Shell also contains a
          complete GEM-based disk utilities package, that lets you copy files
          (with wildcards and with query), delete and rename files, create and
          delete folders, show the free space on any connected drive, and even
          run other programs...all without exiting to the desktop.
ARJ_995   (UN)ARJ version 9.95, rev. 3.004 by the TOS crew.  Claims to be 100%
          compatible with R.Jung's ARJ.EXE for IBM.  Special features: MODE 1
          PACKING, password protection, multiple volumes, diskette user
          support, extra verbose, on-line manual, extended repair options,
          complete output redirection, fast - at least triple compared to any
          other implementation!
ATOM36    Atomik Cruncher version 3.6 by Altair.  This utility will compress
          both program and data files.  Once compressed, the programs will
          still be executable.  When run they will unpack and load
          automatically.  This version of Atomik is compatible with Warp 9 and
          includes an option to unpack files.
AUTO_501  Automation Packer version 5.0.1 by EGB.  This version of the
          Automation packer was written because the ICE packer from AXE was
          faster than the previous Automation release.  This new version of
          Automation also includes some source code that will demonstrate how
          some of this stuff works.
BELEF     Belef II (pronounced: BELL*EFF) version 2.02 - Uncle Carl's Famous
          Archive Shell & Converter by Carl J. Hafner.  Belef can best be
          described as a universal compression utility shell.  It is universal
          in the sense that it should work with ANY compression utility, past,
          present or future!  ALL of the functions associated with your
          favorite parameter taking compression utility are available, as well
          as the ability to convert one form of archival storage file into
          another with a minimum of effort!  Belef works on all ST/STe/TT
          computers in medium and high resolutions.
BOOZGEM3  Booz version 2.1.3 for GEM was written by Michael Alan Dorman and was
          based on the original Booz code by Rahul Dhesi.  It is designed to be
          a basic, memory-efficient extractor for Zoo files.  It's designed to
          be run from the command line, and has a minimum of options--just l,
          t, and x, to list, test, and extract files, respectively.  It
          currently has some limitations.  However it *does* handle the high-
          compression Zoo 2.1 files.
BRIKBIN   Brik by Rahul Dhesi generates and verifies 32-bit CRC values
          (checksums).  It is designed to generate CRCs for text files that are
          the same on all computer systems that use the ASCII character set,
          provided each text file is in the usual text file format for each
          system.  Brik will also optionally use binary CRCs calculated using
          every byte in a file.  Such binary CRCs are portable across systems
          for binary files that are moved from system to system without any
          newline conversion.  Brik can be asked to decide by examining each
          file whether to calculate a text mode or binary mode CRC for it.
CDC_220   The Chaos Disk Compactor version 2.20 by Miles Vignol is a program
          that will turn whole disks into files.  Why?  Well, some uses could
          be to backup entire disks to your Hard Drive, send an entire disk
          over a modem, etc.  If the ST can read the disk, CDC should be able
          to compress it.  CDC has been designed to work in any resolution, and
          on any ST computer.
COMPRESS  Compress is an adaptive Lempel-Zev compression program that was
          ported to the Atari platform from the world of Unix.  This version
          has a default value of 13 bits as the size of the encoding.  This can
          be changed to 12 by using the -b12 option (see docs).
DARC      DARC version 1.1 by Gunnar Teege is a utility for archiving whole
          folder trees from the TOS file system into a single file preserving
          the tree structure.  The contents of the tree is compressed, so that
          the archive will need only about 50 to 70 % of the space the tree
          needed.  The compression and collecting of many files into a single
          one is done by the already existing utility ARC.  THE ARC PROGRAM IS
          NEEDED TO RUN DARC!  DARC is only a frame program that runs through
          the tree collecting everything it finds and feeding it into the ARC
          program.
DECOMPRE  DeCompress version 3 by J. Wesolowski is a GEM based utility that
          will allow you to quickly extract files from ARC or LZH archives.  If
          you wish, DeCompress will also delete the original archives once the
          files are extracted.
ESSCD63   ESS-Code version 6.30 by Michel Forget was designed to allow computer
          users to exchange binary files over computer networks that do not
          support the transmission of binary data.  ESS-Code is 100% GEM driven
          and fully supports the most popular methods of conversion;
          UUEncoding/UUDecoding, MIME Encoding/ MIME Decoding, BTOA Encoding/
          BTOA Decoding, and SHIP Encoding/ SHIP Decoding.  If you get files
          from Internet then you will most likely *N*E*E*D* this program.
          Shareware!
EXPAND15  Expand-o-matic version 1.5 by Andrew Cullum is a shell for dealing
          with a variety of compressed formats.  It is automatic in the sense
          that when you choose an archive to extract, it examines the filename
          extension and determines which archiver to use.  It makes unarchiving
          a group of files go MUCH more smoothly and much quicker.  Shareware!
EZSQUEEZ  EZ Squeeze version 1.0 by John Brocha is an old archiver.  It is slow
          and inefficient by today's standards BUT it can be EXTREMELY useful
          if you come across a file that you want to extract that was
          originally archived with EZ Squeeze.  It doesn't seem to work on the
          Falcon and contains no documentation.
FLXAR31A  FLEXI-ARC version 3.1a by William Wong is an amazing shell for all
          past, present and future archivers.  Everytime a new archiver (or a
          new version of an existing archiver) appears, many ST owners wait
          until their favorite archiver shell program supports the new
          archiver.  Flexi-Arc can use ANY new archiver from the first day of
          it's release.  It is adaptable to ANY archiver.
GTARBIN   GNU Tar version 1.10 Ported to the Atari ST with MiNT (and without)
          by Alan Hourihane.  It is a full fledged TAR that can handle
          compressed archives rather than uncompressing and then untaring
          seperately.  Included in the binaries part of the this port is Alan's
          compiled version of compress v4.0.  MiNT is suggested because it
          provides all the facilities neccessary to use this program
          successfully.  Supporting pipes are essential for the compress/
          uncompress function of GNU Tar to work, otherwise all the other
          functions should work under standard TOS.
GZIP06ST  GNU ZIP version 0.6 byDaniel Eriksson.  This is an experimental port
          of GNU ZIP for the Atari.  There are two different versions, one for
          the normal TOS filesystem and one for MinixFS (or similar).  The TOS
          version hasn't been tested very much, but it should at least give
          people without MinixFS a chance to test GZIP out.  This version of
          GZIP was compiled with GCC v2.3.1 PL1 and MiNTlibs PL25.  For
          information on the different compile-options used please see the
          included Makefile.st file.
HPACK     HPACK multi system archiver ported to the Atari ST by Martin
          Braschler from the original code by Peter Gutmann.  This version is
          complete, just about each and every feature should work.  HPACK is
          available for virtually every system of some importance, and all
          versions are REALLY compatible.  HPACK uses powerful unix-style
          wildcard matching, allows large archives to be split over several
          disks, uses powerful public-key encryption ("military grade"), and
          allows archives to be secured with a "fingerprint" that ensures that
          an archive is not tampered with.
ICE_2_40  Pack-Ice version 2.40 by Axe of Superior is a program packer.
          Programs packed with the ICE Packer will automatically unpack and
          execute when run from the desktop.  Ice Pack is now compatible with
          more programs.  Try the programs that never worked when they were
          packed with any packer.  They might work now. (No promises made...)
IMPLODER  This little hack is an extremely quick port (by Torbjorn 'Hackbear/
          Digital Chaos' Ose) of the Amiga file packer "File Imploder".  It is
          a program packer similar in function to Atomic or the ICE Packer.  It
          is very simple to use - install it as a .ttp taking full-pathname.
          Then simply drag any file onto the imploder.ttp icon.
LAZA      LAZAZ! version 2.00 by Andreas Papula is a very slick and easy to use
          GEM shell for LHarc, ARC, ZOO, ARJ & ZIP.  The program and docs are
          in German but the program is very easy to use.  Shareware!
LPAK      LPAK version 0.5(beta) by Andrew D. Webber is a little utility that
          allows you to compress data files and will then decompress these
          files without user intervention whenever they are used.  The user
          compresses selected files using the supplied packer (LZSS.PRG) and
          accesses them as normal when LPAK is installed and active.  At
          present LPAK only works on data files - i.e. don't use it on program
          files (use a program packer on those instead).
MDP_212   Mega Depack release 2.12 - Coded by Mike Watson in 100% 68000
          assembler ("who needs compilers to do GEM based programs?").  Mega
          Depack will run as either a desk accessory or as a program.  This
          utility will "unpack" files that were packed with most of the popular
          program packers (such as ICE or Atomic).  53 different packers and a
          total of 89 different file formats are supported.
MPACK13B  Mpack version 1.3 by Hans Streibel.  This is a port of the mpack/
          munpack programs.  mpack/munpack encodes/decodes MIME messages.
          munpack is also able to decode uuencoded files.  This port runs ONLY
          under MiNT on the Atari.  The port consists in essence of the unix
          version of mpack/munpack - thus, in theory, it should be possible to
          send mail from mpack.  However this has not been tested.
MSA_2_3   Magic Shadow Archiver version 2.3 allows you to create an image of a
          floppy disk as a file on a hard drive - which can be restored to
          another floppy later on.  Version 2.3 adds the following new
          features: Runs in all resolutions under all TOS versions (even
          MultiTOS), works on the Falcon030, can be run as a PRG or as an ACC!
          *NOTE: Provided for use with the *MANY* demos contained on this CD.
NAUGHTY   The Naughty Unpacker version 1.3 by Marinos Yannikos is a tiny little
          program that will unpack almost all packed executable programs.  If
          you try it on a program which isn't packed, in most cases it will
          tell you, even though it does not really check for specific unpacking
          routines.
NCMP424   This is an ST Port of Peter Jannesen's (N)compress version 4.2
          patchlevel 4.  (N)compress is an improved version of compress 4.1.
          Compress is a fast, simple LZW file compressor.  Compress does not
          have the highest compression rate, but it is one of the fastest
          programs to compress data.  Compress is the defacto standard in the
          UNIX community for compressing files.  Includes source code diffs.
PACSH258  PacShell version 2.58 by Holger Weets is a GEM shell for various
          archiver programs including: Zip, Zoo, Lzh, Arc, (UN)Arj, Tar.
          Contains only German documentation, but the program has 100% English
          text/menus.  This version features a bugfix concerning the use of
          ZIP.  Shareware!
PFXPAK32  PFXPAK Programm-Packer version 3.2 by Thomas Quester is a nice
          utility that will take an executable program and apply LZH
          compression to it BUT the packed program will STILL BE EXECUTABLE.
          Similar to DC Squish but with MUCH BETTER COMPRESSION!  All docs are
          in German.  The program is completely GEM based and easy to use.
POWDEPAK  PowerPacker version 2.0 DataDePacker by bITmASTER of TCE is a small
          utility that will unpack files that were packed with the PowerPacker
          from the Amiga.  If you come across a PowerPacked data file you can
          now unpack it and examine it.  All documentation is in German.
RD_DEMO   RD - Resident De/Compressor (Demo) by Si.  RD is a file compressor
          and decompressor that works automatically with minimal intervention
          from the user.  Compressed files are read as if they were the
          original raw file.  This includes the ability to randomly access any
          information in the raw file.  New files are compressed when they are
          created.  Compressed files that are opened, then altered before being
          closed are recompressed.
SCRUNCH2  ST-Cruncher version 2.0 by "The X-King Arthur".  A GEM based cruncher
          program from Europe.
SPLITTER  Splitter version 2.0 by S.Coates & M.J.Matts was written after a
          request from Alan Woodcock (Desktop Services) who wanted to be able
          to ship a 1 meg+ scanned image file to another machine via floppy
          disks, obviously the size of the file presented a major problem,
          especially if it had already been packed with LZH, ZIP or another
          archiver.  Splitter allows you to overcome this barrier by breaking
          the large file into smaller blocks, and then rebuilding it to it's
          original form.  Shareware.
STZIP26   ST ZIP version 2.6 by Vincent Pomey is an archiver that is 100%
          compatible with PKZip 2.04 on the IBM PC, and the Unix Info-Zip
          programs Zip 1.9/Unzip 5.0.  It features a full GEM interface.
          Postcardware!  (EVERYONE should register this one)
          *NOTE: Provided for use with the ZIPed files contained on this CD.
TAR_1112  This is a port of GNU tar 1.11.2 for MiNT and minix file-systems. The
          program has been compiled using gcc 2.4.5 and the mintlibs pl34.
          Stacksize has been set to 16 Kb; it may need to be increased.  Main
          changes since the previous version are: Support for "gzip" instead of
          "compress", no more complaints about failed changes to access times
          for directories.  Ported by Hildo Biersma.
TWOINONE  Two-in-One version 1.20 by Gregor Duchalski is an archive shell and
          manager for the Atari ST/STe/TT/Falcon that supports ARC, ARJ,
          LZH, ZIP, and ZOO.  Includes a text viewer module.  Can be used
          as a GEM application or called from a CLI.  The program and docs are
          in German.
UNARJSHL  UnARJ Shell version 0.2. by R. J. Darling is a simple shell program
          to make the use of UnARJ very simple.  A lot of people prefer to use
          a shell than to mess around with command line parameters.  This shell
          is designed for use with UnARJ v2.21 by Jiri Lamac.  It will not work
          with any other versions of UnARJ as far as I am aware.
UNLZH172  UNLZH version 1.72 by John Harris is a program for extracting .LZH
          archive files.  UNLZH combines an easy to use, GEM based interface
          with high speed extraction routines, to give you a much simpler and
          much faster way to extract LZH archives.  It is a self contained
          program - you do not need to have LHARC or any 'shell'. It is written
          in 100% Assembly language and extracts approximately four times
          faster than LHARC.  UNLZH can search past damaged sections of an
          archive, and should be able to extract the rest of the files.
UNZIP51B  The Info-ZIP group's portable UnZip zipfile-extraction program
          version 5.1 beta (and related utilities).  UnZip is an extraction
          utility for archives compressed in .zip format (also called
          "zipfiles").  Although highly compatible with PKWARE's PKZIP and
          PKUNZIP utilities for MS-DOS (in addition to Info-ZIP's own Zip
          program), the primary objective of this program are portability and
          non-MSDOS functionality.
UUX789    This is uud.ttp version 3.3 and uue.ttp version 3.1 as compiled
          (ported) on the ST by Steve Yelvington.  The programs are full
          implementations of UUencode and UUdecode.  They are named uud and uue
          instead of uudecode and uuencode to avoid confusion between different
          implementations of the programs.


   *************************************************************************
   **                    Atari ST Benchmark Utilities                     **
   **                         /UTILITY/BNCHMARK/                          **
   *************************************************************************

STFPUTST  MC68881 Test Utilities.  Two programs that perform a simple test to
          determine if an MC68881 FPU (Math Coprocessor) chip exists, and if
          so, if it is working.  These programs have only been tested on the
          MC68881 mapped into memory as a peripheral device (e.g. installed on
          the ICD AdSpeedST board or on the Atari SFP004 Floating Point
          Coprocessor board).  Both programs perform floating point
          calculations for ten seconds and then display a "speed factor" which
          is proportional to the number of calculations performed.
STKONF_E  STKONFIG version 3.10 by Roland Voss provides the system information
          about your ST/STe/TT computer.  It tells you virtually everything
          that is installed or going on inside your ST.  Includes both English
          and German documentation.


   *************************************************************************
   **                       Atari ST Boot Utilities                       **
   **                         /UTILITY/BOOTUTIL/                          **
   *************************************************************************

ACC13     Accessory version 1.3 by Murray Levine is a program that will let you
          load all of your accessories out of a folder called ACCS on the boot
          drive instead of loading them out of the root directory of the boot
          drive.  This helps to keep your main directory less cluttered
          especially for hard drive owners.
ACCSLOAD  ACCSLOAD version 1.0 by Marcus Haebler is designed to work together
          with the 5.5.0 version of the ICD hard disk-driver.  This driver is
          able to execute the AUTO-folder from the partition you want if you
          press the corresponding key while booting.  Now you can have multiple
          AUTO Folder setups - each on a seperate partition and use whichever
          one you desire.
ACC_ACE2  Accessory Ace version 1.2 by Kent Kordes.  Just put Accessory Ace in
          an AUTO folder, and It will allow you to choose the accessories you
          want on the desktop.  Accessory Ace is simple to use just follow the
          online menu.  Accessory Ace supports up to 500 accessories and works
          in both color and monochrome.
BOOT162   Booter version 1.62 by Steven Lee is a simple bootup configuration
          program for managing accessories and programs in the AUTO folder.  It
          supports up to ten configurations.  Booter should be the first
          program in the AUTO folder.  Any programs that execute before Booter
          will not be managed.
BOOTSIE   Bootsie by Stefan Krey writes some useful and often needed code to
          the bootsector of drive A:.  It allows also to put your own bootcode
          into the bootsector.  Contains both English and German documentation.
BOOTXBIN  BOOT-X version 1.2 by Dieter Fiebelkorn lets you decide which
          configuration setup you wish to load (Auto programs and ACCessories)
          at boot up.  Includes English and German documentation.
BOOTXS22  BootXS version 2.20 by Christer Gustavsson helps you select what
          should be loaded at boot time.  This version handles DA's, CPX's,
          autoloading programs, desktop.inf / newdesk.inf files, assign.sys
          files, MiNT configuration files (mint.cnf), GEM configuration files
          (gem.cnf), MiNT filesystems (.xfs) and MiNT device drivers (.xdd).
          It's completely Gem-based, and very easy to use.  Shareware!
DESKCHNG  Desktop.inf Change Program by Michael E. Valdez.  This program,
          placed in the AUTO folder of your boot disk will test the resolution
          you are booting into and change the DESKTOP.INF file for whatever you
          want.  The program requires that you produce three files or less, if
          you do not work in all resolutions; let us say, you need one file for
          each resolution you use.
DESKSWIT  Desk Switch by Charles F. Johnson is a versatile and powerful little
          program, that lets you instantly switch from one desktop setup to
          another.  Desk Switch reads .INF files created with the GEM desktop's
          'Save Desktop' function, and sets every parameter saved in the file.
          It can be run as an ordinary program (by double-clicking from the
          desktop), or as an "Installed Application" from the desktop or from
          CodeHead Software's HotWire.  Shareware!
EASYBOOT  Easy-Boot version 1.0 by Steve Wells is, as the name suggests, a very
          simple, no-fuss, no-frills Bootup manager, that can turn programs in
          your AUTO folder, ACCessories, and CPX (X-Control modular
          accessories) on & off, and it can also select different ASSIGN.SYS
          files for GDOS, and alternative Desktop setup files (Which can be for
          the TOS 1.xx desktops, New-Desk (TOS 2.xx to 4.xx), or even for
          things such as TeraDesk, Neo-Desk and other replacement DeskTops!).
          Shareware!
HAZEL_4   H.A.Z.E.L. by Henry K van Eyken is adaptation of a golden oldie named
          H.A.Z.E.L. by the original author, Mr. Greg Knauss.  It facilitates
          trying out or experimenting with a variety of desktops.  It is a
          boot-up, TSR program that takes first spot in the AUTO folder. If one
          presses the left shift key during booting up (after the harddisk
          sign-up messages have gone by), Hazel stops to offer a choice of
          desktops for which appropriately named desktop .INF files have been
          prepared.  If the key is not pressed, the arrangment used in the
          previous session comes up.
MEGMATIC  MEGA-Matic version 1.15 by Lloyd E. Pulley, Sr. is another boot
          configuration program.  Unlike some other boot config programs that
          FORCE you to enter whcih config you want every time you boot, MEGA-
          Matic will default to a certain configuration if it doesn't receive
          any input from you within a few seconds.  This means you can still
          select any boot configuration you want, when you want but you can
          also have the machine boot unattended (and it will use a pre-
          determined confiuration you have chosen).  Shareware!
MOUSEBT1  Mouse Boot version 3.D by Scott R. Lemmon is an Accessory, Auto-boot,
          Desktop, and Assign.sys file manager.  It will switch accessories and
          auto-boot programs on or off, copy Desktop.inf and Assign.sys to the
          root directory of the boot drive, or even allow you to set-up two
          user defined file types to be copied to any active drive.
          Additionally, Mouse Boot will hold up to 20 presets of the most
          commonly used file combinations allowing you to quickly select them
          upon boot-up.  Except where a name or path must be entered, all of
          this can be done without touching the keyboard!  Shareware!
SPBT81    Superboot version 8.1 Gordon W. Moore - latest version of the premier
          shareware boot manager.
TUBS_332  TUBS (The Ultimate Boot Selector) version 3.32 by Andreas Alich is a
          boot configuration program for all versions of TOS. It will activate/
          deactivate auto folder programs, accessories, and let you select
          which Desktop.inf, Assign.sys, and Mint.cnf file you wish to use. The
          program and all docs are in German.  Shareware!


   *************************************************************************
   **                       Atari ST Disk Utilities                       **
   **                           /UTILITY/DISK/                            **
   *************************************************************************

ABFORMAT  ABFormatter by Gregg Hungerford is a floppy disk formatter for 1 or 2
          floppy disk drives.  As ABFormatter is in itself a multitasking
          program, both drives are formatted independently of each other and
          don't require the same set up.  Non-critical bad sectors are mapped
          out of the File Allocation Tables.  Shareware!
ACACHE    Acache version 1.1 by Harm Jetten is a disk cache program for the
          Atari ST that keeps 16 floppy disk sectors in memory.  Only drive A:
          is cached.  Acache is write-through; all disk write requests are
          immediately written to the floppy.  In order to keep the number of
          cached sectors low and memory requirements reasonable, only requests
          for ONE sector are cached.  This results in caching FAT sectors, root
          directory, subdirectories and small files, and prevents the cache
          being flushed after e.g. loading a large program.
ALASPEC   ALASPEC.PRG by M. SARO is a public domain utility program that will
          format and copy ALADIN and SPECTRE disks.  The program operates in
          both English and French and has documentation in both languages.
ANALYSER  ANALYSER version 1.2 by Roger Burrows is a simple ACSI/SCSI device
          scanner.  ANALYSER is a program that will scan the peripheral bus(es)
          on STs, TTs, and Falcons.  On the ST, it scans the ACSI bus; on the
          Falcon, it scans the SCSI bus; on the TT, it scans both the ACSI and
          SCSI buses.  It issues an INQUIRY command to each possible device id
          in order to determine if there is a device at that id and, if so,
          what type of device it is.
ARCBIT    ARCBIT is a utility program that will set or reset the archive bit on
          all normal files within a user-supplied directory.  This allows any
          backup program that uses the archive bit to skip over or backup the
          files that the user has flagged with the utility.  This is especially
          useful for that folder nested deep within the backup pathway, full of
          files that you do not want to backup.  Some of the routines within
          may be useful for toggling individual files, such as BASIC's random
          files, which seem to effectively elude detection by some backup
          programs even though they have been modified.  The LDW Basic source
          code included.
ARGUS     Argus & Xargus were written to provide an easy way to keep track of
          what a program currently running is doing (reading) on the disk.
          Argus intercepts the Bios call RWABS (see you bios doc) and displays
          the parameters.  It also displays the address from where the bios was
          called, as well the error number returned by the bios.  Xargus does a
          similar thing to the XBIOS call Floprd. (Xbios call #8)
ASHELL    ASH (A SHell) version 0.70 by Jerry Nowlin.  This program provides a
          CLI (Command Line Interface) to be used instead of the normal GEM
          desktop.  The built-in ASH commands are very similar to equivalent
          UN*X commands where that comparison applies.  This version of ASH has
          I/O redirection built into the built-in commands.
BACKUP    A couple of files from R.Ritter that have been developed to help
          manage disks for the Atari ST: BKUPSEL.TTP - Prepares a shell script
          (for MT C-Shell) that will back-up the selected volume into a library
          file for ARC.PRG.  BACKUP.SH - This is a simple shell script for MT
          C-Shell that will back-up the contents of volume or subdirectory,
          using the PD program ARC.TTP and BKUPSEL.TTP.  Includes C source code
          for BKUPSEL.
BACKUP12  Hard Disk Backup Utility version 1.2 by David B. Chiquelin.  This
          hard drive backup utility is designed to perform a file based backup
          of hard drives.  It will not perform an image backup, but will speed
          the backup process by only backing up new files and those files which
          have been modified since the last backup.  Old versions of files
          which have been modified are NOT maintained on the backup disks.
          Hard disk files which have been modified or deleted are deleted from
          the backup disks and the freed up disk space is used to store the
          current version of the modified files and new files.  Shareware!
BACKUPST  BACKUPST - A backup program for the Atari ST by F.J.R. Appelman.
          BackupST is a backup program for the Atari-ST.  It writes the hard
          disk data to floppy disks.  BackupST has 3 modes in which it works;
          creation (backup), listing or extraction (restore).  The floppies
          written by BackupST are in a proprietary format, and are NOT readable
          by GEMDOS.  You need BackupST again to read the floppies.
BITMASTR  BitMaster version 1.05 was designed to create and modify special
          track formats.  Special track formats include high density disks or
          non standard formats such as on protected disks.  BitMaster is not
          designed with the beginner or intermediate user/programmer in mind.
          It must be combined with knowledge about track formats in order to
          effectively use it to it's full potential.
BLITZ145  Blitzschnell Hard Drive Defragmenter and Optimizer version 1.45 by
          Erin Matthew Monaco.  Written in 100% assembly language, Blitzschnell
          is compact and offers the speed not found in programs written in high
          level languages.  Shareware!
BLRUT17   A collection of 24 utilities by Bud Rasmussen - all written in 68000
          assembly language using the ASSEMPRO assembler from ABACUS.  All of
          these utilities are interactive, which means that all the information
          they need from the user will be requested at run time, so all the
          user need do, is run them, and reply to the queries.  Most of these
          are disk related utilities.
BOOTINFO  Bootinfo is a simple desk accessory written by J.B. Lancashire that
          will help you identify different disk formats.  To use it you must
          copy the file BOOTINFO.ACC to the root directory of the disk you boot
          up with.  Next time you switch on or press the reset button the
          utility will automatically be loaded and installed.
BOOT_ED8  genuwax Boot Editor version 8.0 will allow you to dump your boot-
          sectors under Gem environment.  You'll be able to test for the
          presence of viruses.
BRDLFRMT  FORMAT version 2.04 has the following features: program and accessory
          in one file; as an accessory it can format disks in the background;
          can create MS-DOS compatible disks; can create immune (virus
          resistant) disks; can use an external bootsector file as prototype
          bootsector; formats in reversed order; can format two disks at once.
BULKCOPY  The Compulsive Bulk Copier by John T. Grieggs is a utility intended
          for massproducing microfloppy diskettes.  The basic operation of the
          Compulsive Bulk Copier once it has been started is quite straight
          forward.  First, you are given the opportunity to insert a source
          disk or exit the program.  The program will scan the format of the
          entire disk, and the attempt to load the entire disk into memory.  If
          the disk does not fit, the operation is aborted.  Once the disk has
          been loaded, you will be given the opportunity to insert a
          destination disk or exit.  This step will be repeated until you exit.
          You then have the opportunity to load another disk or exit the
          program.
BYTEFR33  Bytefree version 3.3 by Darin Wayrynen.  This is the third version of
          Darin Wayrynen's hard drive free space listing program.  He wrote the
          first one so that he could find the free space on all available
          partitions of his hard drive (very helpful for bbs maintenance) and
          it wasn't very fast.  The third version is faster, and has replaced
          the tos based interface with a gem interface.  The program is fairly
          unique in that it is both a desk accessory and a program at the same
          time.  Shareware!
CACHE     Floppy Disk Cache by Eric Gisin.  A disk cache is resident program
          that speeds up disk IO by keeping a copy of recently used sectors of
          the disk in RAM memory.  It is similar to a RAM disk but has the
          advantage that files are always up-to-date on the disk.  You can't
          lose files like a RAM disk does when the system crashes.  This cache
          will typically eliminate from 50-85% of disk IO if enough cached
          sectors are installed. There is a slight CPU overhead in copying
          sectors to the cache after disk IO.
CACHEV35  Cold Hard Cache 3.5 by Robert E. Owens III is an easy to use disk
          caching  program that works with both hard drives and floppies.  Disk
          caching improves disk I/O speed by keeping the sectors that are used
          most frequently in RAM.  The I/O speed of a cached drive will be
          between that of a RAM disk (very fast) and the uncached drive (much
          slower than a RAM disk).  Cold Hard Cache was designed to be as
          small, reliable, and as fast as possible.  The program buffers reads
          only.  All writes go directly to disk unless the sector is already in
          the cache and the data has not changed.
CDPLAY    Audio CD-Player version 1.0 by Alexander Seitz is a program that will
          allow you to use your Audio CD capable SCSI CD Rom drive to play
          audio CDs.  The program was apparently developed and tested on a 1040
          STe with an ICD AdSCSI Plus and a Sony CDU541 CD Rom Drive.  All
          documentation is in German.
CDROM     This is Atari's Falcon compatible XFS CDROM driver.  It is launched
          by MiNT during boot-up.  Simply place in the root of your boot disk
          (usually C:) and rename CDROM#$.XFS Where # is the drive letter you
          wish to use and $ is 8+ the selected SCSI address.  Requires  MiNT.
CH3_CDAR  Compact Dir 3 (CD3) by Chet Walters.  This is a quick and dirty way
          to get a nice compact printout of your hard drive directory.  Good to
          use just before a back up or just to keep a record.  It uses the
          smallest printing mode of both the HP Deskjet (and I assume the HP
          LaserJet) and also superscript mode of an Epson compat.  This baby
          will fit a list of about 10 meg worth of files (8 meg with an Epson)
          onto ONE PAGE for easy cross referencing and quick referencing.  CD3
          has been made compatible with the CDAR 504 and MetaDOS.  Shareware!
CHKHD81   CHECKHD version 8.1 by Claus Brod, Anton Stepper monitors important
          hardware values of hard disks available for the ST and times access
          and transfer rates.  It was written to create a low-level standard
          test for hard disks.  CHECKHD is a GEM program and should therefore
          be easy to use.
CONVERT   Format Converter 1.0 by Lonnie Dwayne Webb was written to convert the
          boot record of old TOS diskettes to IBM standards.  It also permits
          the user to write the Neodesk boot record.  In case you haven't found
          out already, *OLD* TOS machines not format IBM disks without some
          help.  The first sector (boot sector, or boot record as Norton puts
          it) is written differently.  This program will write a boot sector to
          your floppy disk that will allow an IBM to properly read it.
          Shareware!
COPY2     Multitasking Copy version 1.0 is, as the name implies, a multitasking
          copy program.  It is a GEM Desk Accessory so it can be called up at
          any time.  The program and all docs are in German.
COPYCART  ATARI Megafile 44 Cartridge Copy version 1.05 by Anton Raves.  This
          utility program enables the user of an Atari Megafile 44 to copy a
          SQ400 cartridge with just one drive for backup purposes.  The program
          runs on every Atari ST computer,  although the number of cartridge
          swaps will reduce with larger memories available.  On a Mega ST4
          you'll have to swap 13 times, taking about 15 minutes.  If you have a
          second Megafile 44, it will take only 2 minutes 47 seconds to copy an
          entire cartridge.
CPBOOT    CPBOOT.TOS.  This program is designed to copy an executable boot
          sector from a disk of one type of format to that of an other.
          Basically all CPBOOT does is to read both the source and target boot
          sectors from respective disks, copies from the source the branch
          code, filler, and the boot sector code to the target sector.  Then a
          call to Protobt() is made in order to adjust the checksum for an
          executable boot sector, which is then written back to the target
          disk.
CSTAMP    CopyStamp version 1.00 by Theo Driever is a little utility to
          'adjust' date and time info associated with a file.  After starting
          the program the fileselector box appears.  Simply click on a 'from'
          file and on one or more 'to' files.  Choose 'cancel' to select a new
          'from' file, twice to leave the program.  Freeware!
DBACKUP   dbackup by Andrew Olausson is a backup program primarily targetted at
          people who have relatively large removable medias.  Normally, a
          backup program is often dedicated for a specific removable media
          which, in face of evolution, at some time from the point of design
          and creation cannot support a new media.  The author has tried to
          eliminate any such dependencies and the program should work on any
          media. It has been tried with mixes of hard disks, floppies, and a 10
          Mbyte removable floppy disk unit.
DBLEFEAT  DabbelFeature version 1.0 by Claus Brod serves a twofold purpose:
          First, it disables or enables the display of growing and shrinking
          boxes when dialog boxes or windows are opened and closed.  Second, it
          can redirect drive accesses.  Shareware!
DCACHE    DCACHE by Atze Dijkstra is a disk cache and as such keeps copies of
          transferred disk blocks in memory.  Generally speaking, a cache can
          be a good and more flexible alternative for ramdisks.  DCACHE is
          one of many disk caches available but can be configured in several
          ways.  It's behaviour can also be influenced after the cache has been
          installed.
DCDSKINF  DC Disk Info version 1.0 by Keith Gerdes (Double Click Software).  DC
          Disk Info is used to give you a quick 'snapshot' of any disk.  You
          will get visual representation of the file allocation on your disk,
          plus certain statistics about the disk.  Freeware!
DCFLIGHT  DC FLIGHT aka DC F-Light aka DC Floppy Light version 1.0 by Keith
          Gerdes & Michael B. Vederman (Double Click Software).  DC FLIGHT
          installs a routine into the read/write vector (RWABS) of storage
          devices - floppy disks, hard drives, ramdisks, etc.  Each time such a
          device (all with the exception of the floppy) is accessed, the floppy
          drive A light will come on until the operation is finished. Freeware!
DCFMT302  DC Format version 3.02 is a floppy disk formatter.  DC Format will
          format regular Atari disks (with or without IBM compatible boot
          sectors) or Spectre/Magic Sac format disks.  Freeware from Double
          Click).
DCMAXTRK  DC Max Track version 1.0 by Keith Gerdes and Michael B. Vederman
          (Double Click Software).  Have you ever wondered how many tracks your
          floppy disk drive can format?  Wonder no more, DC MAX TRACK will tell
          you how many tracks your floppy disk drive can handle.
DCOPY36   DCOPY Version 3.6.  Original DCOPY by Ralph Walden, updated versions
          by L. Novak.  DCOPY is a "shell" that will let you do many things
          with your drives including copy files, ARCing/unARCing files, viewing
          text files, etc.  This version includes 57 bug fixes and/or added
          features compared to Ralph Walden's original version.
DFORMAT   Diamond Format version 1.0 by Robert D. Luneski.  At last! The speed,
          flexibility, and reliability of Diamond Back II's custom formatter in
          a standalone form.  Provided in both PRG and ACC form, Diamond Format
          has all the standard features you find in a formatter plus a few new
          twists.  You can choose 1 or 2 sides, 80 or 82 tracks, twisted or
          normal format, and 9,10 18 or 20 sectors per track, verify or no
          verify.  Click on the appropriate buttons to select your choice and
          then click on the Foramt A or Format B buttons to begin.  Control-C
          aborts the format at any time.  ST Careware from Oregon Research
          Associates.  Please support all your ST Careware authors.
DF_SUITE  A suite of disk<->file transfer/backup utilities by Alan Evans.
          Sectman - the sector manager allows the transfer of specified sectors
          (512 bytes) from DISK <--> MEMORY BUFFER or from FILE <--> MEMORY
          BUFFER.  Hdqbur - Hard disk quick backup and restore utilizes
          techniques similar to Sectman to quickly back up a hard disk
          partition onto big files on floppies.  Dft - the Disk-File transferer
          is similar to Sectman in concept except that it is designed to shift
          FILE<-->FILE, DISK--->FILE or FILE-->DISK or DISK<-->DISK but without
          requiring enough free ram to hold all transfer bytes simultaneously
          in memory.
DISKCAT   Discat version 1.0 by Matt Leber is a cataloging program for your
          floppy disk collection.  It will keep track of what is on each of
          your floppy disks and even print out labels for you to put on each
          floppy that indentifies what is on the disk.  Shareware!
DISKDOUB  Disk Doubler version 1.0 by Steven Grimm.  This program allows users
          with double sided disk drives to store two single sided disks on one
          double sided disk.  It will copy from either side on either floppy to
          either side on either floppy.  It's mainly useful for archival
          purposes; one double sided disk can take the place of two single
          sided disks.
DISKEDIT  DiskEdit Version 1.0 by Ken Smith (kks) is a disk editor for the
          Atari ST.  DiskEdit allows you to peek and poke around your disks in
          file mode or BIOS sector mode .  The ability to view and modify the
          disk using XBIOS (hardware) parameters is also supported.  DiskEdit
          was written in 68000 assemblers using the A-Seka assembler from Kuma.
DISKMECH  DiskMech by Doug Olson/MDS Development is a very powerful disk
          analyzing, archiving, and editing tool.  DiskMech offers features
          that no other disk editor does, such as: Sector Editor - You can read
          and edit any sector regardless of the size, track number, or side
          number.  Format  Editor - You can create  any type of sector layout,
          custom ID fields, specify gap lengths, control CRCs, and many other
          options.  Analyze disks for abnormal formats.  DiskMech also offers a
          full range of backup utilities.  Shareware!
DISKMON   DISKMON by Juerg Moeckli is a public domain disk monitoring program
          for the Atari ST.  It lets you examine a disk sector by sector, edit
          a disk's contents, and much more.  The program and all documentation
          is in German.
DISKTOP2  DiskTop 2 by Todd Burkey is the predecessor to Todd Burkey's
          DiskScan.  DiskTop is great for folks who just want to keep track of
          what's on their disk and don't care about the extra bell's and
          whistles (and menu options) that DiskScan offers.
DIVERT13  Drive Divertor version 1.30 by Stuart Coates allows you to run
          software that is designed for floppy only systems off of a hard disk.
          This is achieved by intercepting any disk accesses at GEMDOS level
          before the Operating System gets its hands on them.  When a command
          is intercepted it is examined to see if it needs diverting, it not
          the command is executed as normal otherwise it is modified and then
          executed.
DKLOG     Disk Logging Desk Accessory by Keith Bedford is a utility that logs
          all disk i/o and display as required.  The RWABS vector will
          revectored to the program and all subsequent i/o routed through it.
          Details of each i/o will be logged, including the time between
          actually initiating the i/o and a response being received.  When the
          memory buffer is full (120 entries as released) logging wraps around
          to the start of the buffer.
DOCP      docp version 1.1 by Roy Bixler is a directory-oriented copy program.
          It gives you better control over which files you can copy or move.
          In the simplest case, all files are copied from the source directory
          to the target directory.  A list of files can be specified to limit
          what is copied.  This list can have wild-card file specifications
          (default list = *.*) and may be applied against either the source or
          target directory (default = source).  If a file specification in the
          list starts with a '-', it is excluded from the copy.  File dates and
          times can be used to limit the file list.  Recursive copies are also
          supported.
DRFLOPPY  Dr. Flop E. Disk puts you in command of your disk drive.  This
          utility allows you to view and manipulate your data -- something all
          programmers find useful and often, indispensable.  Written entirely
          in machine language, the program runs under TOS, and accesses GEMDOS
          and extended BIOS routines.  It's very easy to use.  In fact, it
          performs some tasks automatically.
DRIVEOFF  DriveSaver by B. Schob is written for all those who have an auto-
          booting hard disk.  The way autobooting works is when the computer is
          first turned on it looks for a disk in drive A:.  If there is no disk
          in drive A: it times out after 40 seconds or so and then looks at
          drive C: if a hard disk is attached.  However, the Atari does not
          turn off the drive after timing out.  It will continue running until
          a disk is inserted into drive A:.  This program turns off the drive!
DSCAN12   DiskScan version 1.2 by Todd Burkey is first and foremost a utility
          that lets you 1) archive file information quickly and painlessly and
          2) easily find the files at a later date.  Other features include
          viewing files, hexdumping files, tagging for copying and or deleting
          groups of files, renaming files, changing protections on files,
          invoking external programs, and sorting files.  Shareware!  (When you
          register, you will get version 2.0 which is much more advanced and
          optimized).
DSKCHR33  Disk Chart version 3.3 by Ron Sanborn was originally written as a
          quick solution to display Hard Drive partition space for the author's
          personal use.  Diskchart has been through several overhauls since
          it's first release: it now includes the ability to print the reports,
          fixed a bug to provide better graphing compatibility with TOS 1.4,
          and has been optimized for faster program execution.  Shareware!
DSKSWICH  Desk Switch - The Ultimate Read-Only Control Panel by Charles F.
          Johnson is a versatile and powerful little program, that lets you
          instantly switch from one desktop setup to another.  Desk Switch
          reads .INF files created with the GEM desktop's 'Save Desktop'
          function, and sets every parameter saved in the file.  It can be run
          as an ordinary program (by double-clicking from the desktop), or as
          an "Installed Application" from the desktop or from CodeHead
          Software's HotWire.  Shareware!
DUALFORM  Dual Formatter by M. Murray creates floppy disks that can be used on
          both single sided and double sided floppy disk drives by formatting
          the disk in a special way.  A special folder named "SIDE_2" will be
          on the disk.  Any file(s)/folder(s) located inside the "SIDE_2"
          folder will not be readable by single sided drives, but will be
          readable by double sided drives.  The rest of the entire disk is
          readable by both double and single sided drives.  Shareware!
DUBL_VIS  The Double Vision Formatter by Samuel Streeper.  The Double Vision
          formatter formats disks such that they are readable on both single
          and double sided disk drives.  Single side users will have access to
          400K of data, while double sided users will be able to read the
          complete 800K disk.  Double Vision can be run as a program or a desk
          accessory.
D_MONIT   Disk-Monitor version 1.4 by Volkmar Meineke is a public domain disk
          monitoring program for the Atari ST.  It lets you examine a disk
          sector by sector, edit a disk's contents, and much more.  The program
          and all documentation is in German.
EGALE     Égale version 2.1i by David Reitter - The tool for easy file
          comparisons, alteration and analysis.  Two files are loaded in each
          window and displayed side by side, adjacent to one another, with the
          window divided vertically.  Égale can also load a single file so that
          you can analyse its format or amend it. This feature turns Égale into
          a binary editor for patches and similar applications.  Any file size
          up to the limit imposed by the available working memory in your
          machine can be loaded.  Shareware!
ELFBAK23  ELFBACK version 2.3 by E.L.F Software provides an easy way to do hard
          disk backups and restores to floppies (requires TOS 1.4 or better).
          It can use data compression to reduce the number of floppies needed,
          and stores files in RAM to speed up I/O.  It uses the "archive bit"
          in the file directory to indicate that the file has been archived
          (for use with incremental backups).  It also allows you to inspect
          each floppy before you write on it, and to either reformat, erase
          (faster than reformatting), or use the remaining space on the floppy
          and preserve the existing files.  Shareware!
FATMAP12  FAT-MAP version 1.2 by Jens Brüggemann is a utility that will analyze
          the layout of your disk (maps out the FAT table).  It is a very handy
          utility.  The program and all documentation is in German.
FDF       sfdf - sorted find duplicate files version 1.01 by Roy Bixler.  This
          program finds duplicate files on your disk(s).  It is possible to
          specify multiple disks and see duplicate files across disks.  You
          have control over criteria for finding duplicate files and the order
          in which the duplicates are presented.  For the really business-like,
          there is an interactive delete mode that presents you with menus
          asking which of the duplicate files to delete.  As an option, a
          statistical summary of the duplicate files is printed out at the end.
FDI       FDI by Rod Waehner is a program to help you catalog your library of
          "floppy" disks and the files that reside on each disk.  It does not
          use windows, drop-down menus, fancy colors, or any of that neat
          stuff.  It does give you a complete index of the files you have, what
          disks they are on, when they were last updated, and lots of room for
          descriptions and comments.  And, it's free!
FFIND_10  Filefinder version 1.00 by Ian Morrison & Al Hubbard is the easiest,
          most full featured, fun to use cataloguer you can find!  It was
          written to fill a void in the Atari ST world.  Yes, there are other
          disk cataloguers out there, but all of them left us longing for one
          which is fun, easy to use, and complete.   FILEFINDER will catalogue
          your disks and the files they contain.  It will display ALL files,
          even hidden or system files.  It will show you these file attributes,
          as well as the time of creation and size of each file.  It will
          enable you to keep track of all these program and data files and find
          them when required.  Shareware!
FILEVIEW  FileView version 1.0 by Paul Gardner/Hueysoft is a handy utility
          program that allows you to look at and change the contents of any
          file.  The display shows 80 bytes at a time in decimal, hexadecimal,
          and character formats.  In addition to allowing individual bytes to
          be altered the user may pad bytes onto the end of the file.  FileView
          includes on-line help summarizing its concepts and commands.
          Shareware!
FINDER10  Finder verion 1.0 by Bill Aycock is a simple utility that can help
          you locate a file that contains a particular combination of words or
          phrases.  You can specify up to three phrases to look for, and Finder
          will search all the files in a folder looking for one which contains
          any or all of the phrases.
FLASHFMT  Flash Format by Steve Crunk.  What's faster that a speeding bullet?
          Faster that TWISTER?  This little program reveals and exploits an
          oddity with the XBIOS format command.  It can format disks in such a
          way that they can be read/written to MUCH faster than even Twister
          format disks can.
FLCAT_14  The File Catalog version 1.4 by Randy Hoekstra is a simple utility
          that keeps track of the files on a disk or hard drive partition and
          allows you to monitor changes to your files.  The program reads in
          all the files on a disk or partition and stores them in a file.
          Later, a new list can be generated and the old and new lists can be
          automatically compared to see what has changed.  The 'delta' of the
          old and new file lists will show all files that have been deleted,
          added, or changed (size or date).  Shareware!
FLIP      Flip is a small copier that was originally written to: use the back
          of SS disks and try to save data from damaged disks (because the
          author was getting frustrated with the abort message of DCFORMAT).
          However, it evolved into one of the best disk copiers on the ST for
          unprotected disks.  It is completly public domain.  Includes source
          code.
FLIPSIDE  Flip Side version 1.0 by Derrick A. Hall will allow you to use double
          sided diskettes on your single sided drives.  On a single sided
          drive, only side one is accessible, while side two is not.  Side one
          and two of FLIP SIDE formatted diskettes are fully double sided drive
          compatible.  Meaning that you will be able to access both sides on a
          double sided drive.
FLRMT3_5  Floormart! - The Ultimate Disk Formatter version 3.5 by S. Orandi and
          S. Tringali.  What can Floormat do that the others can't?  Well, the
          big thing is that it can unformat a disk.  How many times have you
          gone to format a disk and found out that you stuck the wrong disk in
          the drive?  The only way to abort it is to shut your ST off: and then
          your data is gone.  If you find yourself formatting the wrong disk,
          simply hit Undo, and your data will be saved.  Includes a built in
          virus detection feature.
FMC       FMC by Larry McConnell.  The ST's operating system caches disk
          information.  It detects floppy disk changes by watching the write
          protect line. If it hasn't detected a floppy disk being removed, it
          will use the directory information in RAM.  Some computers have
          faulty write protect lines, and do not detect when a disk is removed.
          This is quite  dangerous, as your disks may become corrupted if you
          read from a disk, replace it with a different one, and write to that
          disk drive.  This utility will force the ST to always read from a
          disk before writing to it.
FORMAT3   Format version 3.00 by E. E. Aycock is a floppy disk formatter that
          will let you format "normal" disks or format disks in a special way
          that will sped up reading and writing of the disks when they are used
          (sometimes called Twister format).
GHOST     Ghost by Miguel Saro is a formatter and copier for ALADIN®, SPECTRE®
          and MACINTOSH® diskettes.  The program is mainly aimed at SPECTRE
          users who wish to convert files from the now defunct ALADIN format.
          Although SPECTRE 3.0 (the latest version at the time of writing)
          allows you to read the old  9-sector 696k ALADIN discs directly under
          MAC emulation this is only true if your MAC system does not reside on
          a SPECTRE-format floppy (as is the case for SPECTRE 128 owners
          without a hard  disc).  SPECTRE becomes confused between the 9 and 10
          sector formats when it has to deal with them simultaneously.  So
          ALASPEC  (the  predecessor to GHOST) was born to convert between the
          two formats under GEM.  Includes English and French docs.
HACKNCPY  Hack'N Copy version 1.0 allows you to make three different types of
          backups.  The simplest is a normal sector copy backup that
          accomplishes the same thing as dragging one disk icon to another disk
          icon in the desktop.  The only difference is that HACK'N COPY is much
          faster.  The second option is a normal sector backup with format.
          This option allows the destination disk to be unformatted before the
          backup begins.  The third type of backup HACK'N COPY will perform is
          a nibble backup.  This option will backup most protected disks.
          Shareware!
HDFREE    HDFree Pro version 2.0 by Paul Vermeulen is a program that will
          generate statistics about the amount of space that is available on
          your hard drive partitions C-P.  It presents it's information in a
          GEM window that grows larger or smaller depending upon the number of
          partitions available to the system.  Freeware!
HDSCAN    HDSCAN by Todd Burkey - The ST Hard Disk Utility.  HDSCAN is first
          and foremost a utility that lets you tag files throughout your hard
          disk and then copy (or erase) them in one pass.  HDSCAN also lets you
          hexdump any file on the hard disk, view any file (even binary files
          if you like), rename a file, show the free space on drives A and B,
          select for display files matching a specific string (i.e. to just see
          all file names that have NEO in them), select just files in one
          directory, select all the files on all partitions of the hard disk to
          scroll through, and more that will make sense when you try out the
          program.  Shareware!
HD_CHECK  HDCHECK version 1.3 by Bill LeDuc repairs boot sectors that have been
          hit by a bug that disables hard drive auto booting.  The fix was
          surprisingly simple - a call to the Bios function Protobt() to
          recalculate the checksum.  This version also includes interface
          improvements and other minor fixes.  The transfer test will now work
          if the boot sector information is incomplete.  Partition (drive) and
          logical partition sector number will now be included with the sector
          information displayed during a number of the tests.  The TOS error #
          will now be included in file read error messages.
HD_OPT    Hard Disk Optimiser version 1.01 by Jon Marshall is a (pretty quick)
          program for reorganising your hard disk partitions by unfragmenting
          files and moving free space areas to the end of the partition.  The
          program also allows the user to decide in what order the files will
          be stored and to sort the directory entries.  Freeware!
HRAMDISK  HybriSwitch Ram Disk version 1.0 by John Eidsvoog.  This is a stand
          alone version of the HybriSwitch Reset-proof Ram Disk.  It is
          different from other 'reset-proof' ram disks in that they require an
          extra reset when installing.  The HybriSwitch Ram Disk is able to
          accomplish the same task without having to reboot.  Reset-proof means
          that the files will still be intact after a 'warm' reset.  A 'warm'
          reset happens when you push the reset button (assuming that certain
          system variables are intact), or upon recovering from some crashes.
          This means that if a program crashes, or hangs, you can reset and
          recover your files from your ram disk.  Public Domain!
KDP65     Kwik Disk Configuration Editor version 6.50 by Magnum Software.  Kwik
          Disk was first released as a Desktop Accessory in August 1988. It was
          intended to increase the access time for reading and writing to the
          floppy drives.  As it was continually updated, the author added the
          ability to select the seekrate for each drive separately, increased
          drive access speed and optimised the program to be as fast as
          possible and use as little memory as possible.  Shareware!
LEDPANEL  LED Panel version 2.9 by Christoph Zwerschke.  The basic idea of "LED
          Panel" is to make any access to BIOS drives (floppy, harddisk, RAM
          disk etc.) visible and distinctive between drives and kind of access
          (reading or writing).  All information is shown in the upper right
          corner of the screen (normally you can only see the blank right end
          of the menu title line there).  Now with controller CPX.  Contains
          both English and German docs.  Donationware.
MACREAD   Mac HFS Disk Reader [aka "MacRead] by D. A. Bahr was originally
          written to fill a specific nitch in the author's buisness.  He needed
          to transfer Postscript print files and some TIF files from a MAC to a
          TT.  The program will READ FROM a mac formatted scsi/dma HD,or a
          SPECTRE formatted floppy disk and write to regular Atari drives/
          disks.  The program is a keyboard driven TOS file.
MASTER    Master version 6.0 by Michael Naumann and Edgar Greuter is a shell
          that has features found in several operating systems, notably unix
          and MS-DOS.  Shareware.  When you register be sure to indicate if you
          want the German documentation or the English documentation as both
          languages are supported by the authors.
MEGAFORM  Megaform version 2.1 is a disk copy program that has three distinct
          features that set it apart from the rest: 1) Multiple copies - it
          will read one disk and write it out to multiple times on multiple
          disks <fast and accurate>.  2) Special copies - customise your bios
          blocks.  3) fast disk copy - copies disks EXTREMELY FAST!  Shareware!
METADS25  MetaDOS version 2.50 contains the essential elements to get any SCSI
          CD ROM drive going on an Atari TT or to use an "Atari CDAR 504" CD
          ROM on any Atari with an ACSI (DMA) port.  It does NOT support SCSI
          drives connected to an ACSI port.  It does NOT support the Atari
          Falcon030 at all (in these cases, you'll need third party drivers).
          You may use it 'as is', don't expect any updates.  This release fixes
          only some small problems present in previous versions.
MONOMO23  Monomon version 2.3 by Sven Geier is a wonderful, feature rich disk
          monitor program.  It offers too many options to list here.  The
          program and all documentation is in German.
MTOSFRMT  Sanders MultiTos Background Formatter by Sander Fransen/Holland Game
          Design.  SMBF is a disk formatter that is not only fast but is meant
          for use under MultiTOS on 68030.  A special version for the 68000 is
          included.  SMBF allows you to format HD & DD in large, normal and
          fast mode, while keeping Falcon030 compatibility.  Shareware!
NOAHDI    NOAHDI.PRG by Ted Schipper is a AHDI.PRG version 1.7 compatible
          driver for Atari hard disk's.  Maybe it can be used for other brands
          of hard disk's if they have an Adaptec compatible controller.  If you
          have another controller and the driver does not work, you only have
          to rewrite the lowlevel driver part.  The source code is included so
          you can do just that!
OKAMI15   Okami Shell version 1.5 by Wolfram Roesler is a Unix-like CLI for the
          Atari ST.  It should run on any ST.  1 MB and hard disk are
          recommended, modem and mouse are optional.  It will run on all screen
          resolutions, although some commands require lines to be at least 80
          characters wide.  MiNT is supported.  The Okami Shell resembles the
          Unix Bourne Shell (/bin/sh) and in particular the AIX Shell found on
          the IBM RT 6150 computer system.
PANTHER   PAnTHer File Divertor by Gard Eggesbø Abrahamsen is a resident (TSR)
          program which hooks up to the GEMDOS and GEMAES trap vector and
          alters the filespec parameter of most calls that deal with file
          operations.  The purpose of this is to allow the user to have a
          'cleaner' setup on his harddisk, putting all information and
          configuration files in a single folder, data files in another, etc.
          Shareware!
PARKHD    PARK_HD.ACC by Dick Lee is an accessory that will park your hard
          disk's head in it's shipping position.  As with other parking
          programs, once you have parked the head, you SHOULD NOT access any
          partition of the hard disk...  you'll hear weird noises and see some
          strange garbage on your screen.  After PARK_HD.ACC has been selected,
          the head will be parked, and a dialog box will appear telling you so.
          It has only been tested on an original SH204.
PHOTO_CD  Photo CD Rom drivers for MiNT.  All docs are in German.
PS2FORM   PS2FORM by G. Weijers is a simple utility developed so the author
          could exchange files with people using PC clones without having to
          send them floppies to get them formatted.  The built-in formatter of
          the Atari ST formats floppies in such a way that a PC can't read them
          without special software or a special driver.  PS2FORM formats the
          disk the same way as a PS2-compatible. This format is also acceptible
          to the ST. As a small bonus you get some extra space on the disc, as
          the FATs are smaller.
PURGER    Purger - The Disk Purger program by Damien Jones.  This program
          erases all the files on a floppy disk, FAST.  No matter how many
          files are on the disk, they are deleted in less than five seconds.
          Caution should be exercised in using this program.  Once a disk has
          been purged, there is no way to recover the information--not even
          with  UNDELETE.
QKDISK11  QwikDisk: Turbo driven Ramdisk accessory version 1.1 by Link Tomlin
          is yet another public domain ramdisk utility that forms part of the
          'Qwik' series of development utilities.  QwikDisk has only one claim
          to fame, it is MONSTROUSLY fast.  Data transfer to & from the
          QwikDisk is typically over four times faster than other ramdisks. It
          should prove useful to developers or anyone using a GEM based
          application.
RAMBABY   Intersect Ram Baby version 1.0 is a Public Domain Ram Disk and Print
          Spooler.  The speed of this ram disk is much improved over that in
          the popular Intersect Ramdisk that it replaces, as a matter of fact,
          it is nearly twice as fast as the original.  It is functionally
          similar to its predecessor except that drives C through P may be
          designated for installation.  The print spooler is installable in any
          size and may be removed (as can the ramdisk) and re-installed at a
          different size.
RAMLED    RAMLED by Clemens Schrimpe is the modified version of diskbar.prg.
          It lights up the LED on DRIVE A: every time a RAMDISK (on drive G:)
          is accessed.  To use another (or more) drive(s) replace the #6 with
          the proper drive number, you want RAMD_LED to react on.  The assembly
          source code is provided so you can customize it to your heart's
          content.
RAMPLUS   RAMPLUS by John Harris is a combination ramdisk and print spooler
          with a few other features included.  The ramdisk is one of the
          fastest I've seen, and also uses the smallest amount of memory for a
          given ramdisk size.  The spooler is an automatic design that uses
          available ramdisk memory, and thus does not require a separate memory
          buffer.
SALVAGE   Salvage by Merlin L. Hanson is a program designed to aid in
          recovering ASCII files from a floppy disk that has had the FAT tables
          or Directory trashed.
SEARCHER  Searcher version 2.02 by Alex Nicholls is the program that does the
          Spring cleaning on your disks (and MUCH  more!).  The program will
          search any GEM formatted/partitioned drive. Includes: Floppy drives,
          Hard disk drives, and RAM disks.  Shareware!
SECED101  The No-Frills ST Sector Editor version 1.01 by James M. Eli is
          exactly what the name implies - a bare bones sector editor for the
          ST.
SHELL     Another command line interpreter for the Atari ST by Shawn Hargreaves
          is a simple, specialised command line interpreter, very much like
          MS-DOS but more pleasant to use.  It was written for a specific
          purpose: to simplify the task of running a C compiler off a ramdisk
          on a 1040 ST.  The shell features: basic DOS commands, command
          editing, command history, batch files, run tos or gem programs, built
          in C project management.
SHREDR    SHREDR version 1.1 is a program that will completely ERASE a program
          from your drive.  When you delete a file, it is just amrked as
          deleted in the FAT table.  However the original file is still on the
          drive and can be viewed by people snooping around with sector
          editors.  Shredr completely overwrites the file so that no trace of
          it can be found.
STDCAT52  Stdcat version 5.2b by Bob Silliker is a program that can be used to
          catalogue diskettes and hard disk partitions.  It is a GEM window
          application using four (4) windows to display various parts of a
          catalogue.  A catalogue is organized into sections with each section
          containing a number of disks, disk contains paths (folders), and
          paths containing files.  Each section, disk, path and file can,
          optionally, have a comment associated with it.
STREE104  STree - The ST Filetree Scan Utility version 1.04 by Stephen Hebditch
          is a desktop accessory for the Atari ST / STE / TT which lets you
          search for files on your hard disk matching a specification and then
          manipulate them using a TT style desktop.  Search specifications
          include:  File mask with full Unix(tm) style wildcarding, Drive
          partitions to search, Path to start searching from on each drive,
          Depth of folders to search down to, File attributes, Date/Time stamp
          range.  Shareware!
TAPEBIOS  TapeBIOS driver software version 1.5 by Alan Hourihane.  The TapeBIOS
          program allows the Atari machines to talk to a SCSI tape drive
          connected through the DMA bus (not the SCSI bus of the TT).  Provided
          in this package is quite a few extras. i.e. programmers docs, support
          programs, to use and to be used as examples on how to access the
          capabilities of the TapeBIOS software.  Also provided is the
          necessary include files and library code for the GNU 'C' compiler.
TC63CPX   A cpx module to control Turbo Cache version 6.3!
TLC_FORM  TLC Formatter version 1.12 by Tom Hayslett can be run as a Program OR
          accessory.  It formats in a FaST 9 sector (disks read and write
          faSTer than twisted disks) or in standard 10 sector format.  Supports
          'switching' between 2 drives (if you have 2 floppies).  Will format
          80, 81 or 82 tracks and ALL formats are readable on MS DOS machines.
          Allows inclusion of disk volume names, formatting can be aborted at
          any time and errors are properly reported.  Shareware!
TURTLE    Turtle version 3.20 by George R. Woodside is an extremely fast hard
          disk backup utility program.  It requires no special hardware, and
          the floppies written are standard TOS disks.  To accomplish this
          speed, certain simple steps must be taken.  TURTLE requires just
          about all the RAM you have in a one megabyte ST (for double sided
          disks).
UNEEKIT   UNEEKIT.TOS by Ivan D Reid is a program to overcome a problem that
          strikes most Atari ST users from time to time -- the lack of a unique
          serial number on diskettes formatted on MS-DOS systems.  This problem
          gets re-discovered from time to time and many fixes get suggested --
          e.g. using different formatting programs, or a sector editor to patch
          the boot sector, etc. -- but so far there has not been a simple
          program to fix a disk, so here is a little hack to do the job.
UNIXFLOP  Utilities to transfer data to/from unix boxes with floppy drives by
          Colas Nahaboo.  Included utils are Raw2tar, Tar2raw, and Unixflop.
          Includes complete C source code.
UTILCOPY  The Ultimate RAMdisk Copy Program by David Duberman is the program
          every RAMdisk user in the ST universe has been breathlessly awaiting!
          This program does no less than to copy automatically every file and
          every folder (except the AUTO folder) from any floppy to a ramdisk
          (or to any other disk).  Shareware!
VERIFY    VERIFY and AUTOVRFY - Public Domain Programs from Articulate
          Software.  These programs will let you turn off the write-verify
          feature of the ST.  (In one benchmark test, the time taken to write
          200K to the disk was decreased from 62 seconds to 36 seconds by
          turning verify off -- a 42% decrease in time taken.).  The source
          code is available for a small fee.
VERSADIR  VersaDirectory by David W. Binnion will print a directory dump to the
          screen, printer or disk file.  You select which drive and may also
          select which subdirectory.  Finally, choose whether the inner
          subdirectores will be scanned.  That's it.  Experiment a while and
          you will understand it perfectly.  By the way, pressing Q while
          printing will stop the process.  Shareware!
VOL109    VOL version 1.09 by Roland Waldi.  The program VOL serves three
          purposes: 1) You can give disks a label, if you forgot to do so
          during formatting, or even change it.  2) I can remove control-blocks
          created by the "40-folder bug" of TOS for any logical drive.  3) You
          can look at disk characteristics (sectors per track etc.)  of disks,
          including an info if the boot sector is executable (boot sector
          virus?) just by typing "VOL A".
ZORG_141  Ze Organizer by Ludovic Rousseau version 1.42 is a hard disk analyser
          and optimizer (defragger).  Includes both English and French
          documentation.  Shareware!


   *************************************************************************
   **                  Atari ST Miscellaneous Utilities                   **
   **                           /UTILITY/MISC/                            **
   *************************************************************************

1STG1294  1st Guide [released Dec. 05, 1994] by Guido Vollbeding is a multi-
          media hypertext viewing/presentation system (similar in function to
          ST-Guide).  1st Guide supports hypertext format data files, MPEG
          format graphics files, and uses the DSP-JPEG-Decoder from Brainstorm.
          All documentation is in German.  Shareware.
AMIGA     Amiga Emulator by Philip I. Nelson.  As you've no doubt guessed,
          AMIGA_EM.PRG is a joke, not a serious attempt to emulate an Amiga on
          the Atari ST.  On the plus side, AMIGA_EM.PRG is a free program.
          AMIGA_EM.PRG is written in assembly language and it includes several
          actual Amiga screens.  To save space, the screens are stored in
          compressed format and uncompressed as needed.  You must run
          AMIGA_EM.PRG in medium resolution on a color monitor.
BUBBLE    BubbleBook by Armin Hierstetter.  BubbleBook is specially written for
          the ST BOOK (that is where it get its name) and for large screens.
          If you can't find your mouse pointer, just click the right mouse
          button.  A blinking Comic's Bubble appears with (>>I'm here<<).
          BubbleBook works with all programs that use Accessories.
CAL63     Cal version 6.3 by Bill Aycock is a calendar program with a
          difference - it lets you attach 'events' to any day of the year by
          date, according to a day's position in the month, or on a regular
          cycle.  When Cal loads, it reads the current date from your system
          clock and checks to see if any significant events are scheduled for
          the day.  If so, Cal displays an alert that shows you the day's
          events.  Shareware!
CHRONOS   Chronos version by Daniel Roth is a calendar and scheduling software
          for all Atari computers.  The program and all docs are in German.
CID_D202  CALLERID Accessory Utility version 2.02 by Paul D. Lyon.  With CID
          Accessory, you are free to use your computer for anything (except a
          terminal program which will want to capture the CID data also) while
          it is in the background ready to process the ID data.  With CID
          Accessory, you create and maintain an Index file which CID Accessory
          searches when a call is received.  If it finds a match, it shows you
          the matching name automatically before the second ring!  If there is
          no match but the number is provided, then you can automatically add
          this number to the Index file and enter an appropriate name for
          display the next time a call is received from that number!  NOTE:
          Caller ID Accessory requires Caller ID service from your phone
          company and a modem (preferably Supra) with Caller ID capabilities.
          Shareware!
CKBD_13   CKBD Deluxe version 1.3 by Pascal Fellerich - Composed Characters
          Keyboard Driver plus flexible mouse speeder.  Billed as "The ultimate
          extension for the keyboard driver in TOS computers", this utility
          program gives you easy access to any special character available in
          the system character set on any keyboard!  Moreover CKBD Deluxe is
          configurable so that even completely different character sets like
          the ISO set can be used.  Freeware!
FF_RSAVE  FF or Print oR SAVE --  an ALT/HELP vector stealer by Chet Walters.
          This is a revision of an earlier program named HP_RSAVE. This program
          is specific to HP Laser Jets and compatibles.  This has a special
          feature for HP Lasers only!  It's called FF_RSAVE which means Form
          Feed, Print or Save the current screen.
FILMTERM  FILMTERM.PRG will let you identify the film setting used for your
          Kodak Photo CD scans, the scanner version used, and the organization
          that made the PCD file on your CD.  You can look up the film type
          code in the FILMTERM.TXT that accompanies this archive.
FLAME_07  FLAMETHROWER is a small utility that allows you to summon up UIS III,
          shows how much memory you have left (Largest block), change your
          screen colors (Inverts in mono), change the system DATE, re-set the
          system time to whatever time you wish.  You can even run external
          programs from FLAMETHROWER.
FLEXSORT  Flexi-Sort version 1.0 by Albert Baggetta is a rather unusual sort
          program in that it allows an assortment of ways to catalog your ASCII
          files.  It is especially useful to sort lists of names and places,
          but it can produce some unusual results on a variety of ASCII files.
          Do not use it with other types of files since the outcome is rather
          unpredictable.  Shareware!
GULAM     *Gulam* is a shell (i.e., a command line interpreter) for Atari ST
          computers.  It contains some 60+ built-in commands, provides file
          name completion a la *TENEX*, has history, alias and rehash
          facilities, and integrates the shell with microEmacs easing the
          editing of commands being issued.  In common usage, it resembles
          *csh* of *Unix 4.xBSD*; Gulam's control structures, lexical
          conventions and other details are, however, quite different from csh.
GULAMDOC  Complete documentation for the Gulam CLI (Command Line Interpreter).
HEADLINE  Headline version 1.0 by Albert Baggetta produces those silly banners,
          similar to those found in the market rags ("National Enquirer",
          "Midnight Star", etc.).  I've even got them "news-flashing!" across
          the screen, at the touch of a key.  You can even personalize the
          headlines.  Shareware!  (A "naughty" version is available direct from
          the author)
KITTYLCK  The "Kitty" Lock by Erin Monaco.  The "theory of operation" of Kitty
          Lock is very simple, before taking a break and leaving the computer
          in the middle of a computing session, activate The "Kitty" Lock.  Now
          while you are away from my computer you don't have to worry about the
          kitty or kids playing with the keyboard, inadvertantly adding to your
          documents, closing folders, etc!  Upon your return, hit escape to
          clear any stray characters from the text field, type "KittyLck" and
          press return and you can once again resume computing.  Shareware!
MASTER    Master version 6.0 by Michael Naumann and Edgar Greuter is a Command
          Line Interpreter (CLI) that has features found in several operating
          systems, notably unix and MS-DOS.  Shareware (English and German
          versions of the manual and program are available to registered users)
NUTSHELL  NutShell version 1.0 by Jan van Oldenborgh, is NOT a shell.  It
          merely is an interface to a running shell using a system() call over
          the _shell_p pointer (used in GPshell and Gulam, and others).  This
          means that when a shell implementing the _shell_p mechanism is
          running NutShell will give you all its power within a GEM
          applications.  It has been tested with the GPshell of the CRAFT
          package, but should work with (among others) Gulam as well.  It will
          run both as an accessory and as a program.
OSCLI10X  Kommandozeileninterpreter Version 1.0u by Oliver Scholz is a Command
          Line Interpreter (CLI) shell for the Atari.  While the documentation
          is in German, the program itself uses completely English syntax for
          it's commands.  English speaking folks shouldn't have much trouble
          using it.  Shareware!
PASSWORT  Passwort by Jon Clarke is designed to only allow access into your
          computer via entry of a PASSWORD, pretty easy concept to grasp HUH.
          Well not only does it do that but it also "Time,Date" stamps entry as
          well so you can keep track of what time the system has been used,
          last accessed etc.
QUICKRUN  QuickRUN by Robert Jung is a program manager.  You build lists of ST
          programs, which can then be executed from QuickRUN instead of the
          Desktop.  It doesn't matter what the program is; if you can run it
          from the ST Desktop, you can run it with QuickRUN.  And since
          QuickRUN is only 16K, it doesn't eat up your memory.
SIREN     Kiwi-Net Presents The SIREN.ACC.  Imagine just using GEM or your
          favorite monochrome program, and all of a sudden you hear a police
          siren, you think what the heck is that??  [really un-nerving when
          running CALAMUS]  Then all of a sudden it gets louder, and LOUDER and
          a police car drives across the bottom of the screen, you don't
          believe me? TRY IT!  Runs in ST Monochrome only.
SPEC_ZX   Spectrum Screen$ Loader is a utility/cable building project that will
          allow you to connect a Sinclair Spectrum's cassette tape drive to the
          ST.  The program will read all the pictures (SCREEN$ files) you had
          on the tape into the ST and save them on an ST disk as NEOchrome
          format pictures.
SRCHREP   Search and Replace version 9D - A Very Versatile Search/Replace
          Utility.  It has a 400K buffer and allows you to do complex search
          and replace functions.  Freeware.
SST_FONT  Sedated Software Technologies Font Editor by Alexander Hajnal.  This
          program is designed to edit font files used by Warp 9 and Fontrix. It
          is designed to use the standard 8X16 fonts used by Warp 9 and runs
          is ST Medium screen resolution.  Shareware!
STG_UT06  A collection of utilities to use with ST Guide.  Includes a
          program to convert Turbo/Pure Pascal's Help system to ST Guide
          format!  Also includes source code for many of the ST Guide utility
          programs in this folder.  All docs are in German.
XXXXS     XXXX by "Greg".  This program was written for a friend of Greg's who
          was printing up raffle tickets on his ST with PageStream.  It will
          search through a file and replace a sequence of XXXXs with an
          incremental counter.
Z88LINK   Z88Link (A Cambridge Z88 <-> Atari ST Communications Program )version
          1.3 by Ian Johnston allows files to be transferred in either
          direction between a Cambridge Computer Z88 and Atari ST.  The program
          PCLink must be present on the Z88 - this is an optional product from
          Cambridge Computer, supplied on EPROM.  In addition a suitable 25 pin
          <-> 9 pin lead is required.  One is supplied in the PCLink kit.
          Shareware!
ZAP       ZAP version 2.5 by E. van Herk is an editor, designed to edit program
          files.  That is why it cannot change the length of a file, and why it
          displays files both in ASCII and in hexadecimal code.  It needs very
          little memory ( less than 25K ) and may be used on files of arbitrary
          size, to at least a megabyte.  ZAP is a 'public domain' tool.


   *************************************************************************
   **                  Atari ST Multitasking Utilities                    **
   **                         /UTILITY/MULTITSK/                          **
   *************************************************************************

HIDEAWAY  HideAway version 1.1.4 by Bruno Essmann.  HideAway is able to hide
          the windows of applications.  If you have a couple of applications
          running at the same time and are starting to lose control of the
          window jungle, you may simply hide the applications you don't need
          at the moment.  For use with MultiTOS.
MICRORTX  MICRO RTX from Beckemeyer Development Tools is an OS replacement
          which works with TOS and allows multitasking of TOS programs.  It
          provides the system services necessary for implementing multitasking
          in your programs.  Included with this SHAREWARE distribution is the
          complete MICRO RTX programming manual describing how to use MICRO RTX
          in your programs.
MINTTL01  MiNT-Tools Release 1 Commandline Utilities (chgrp, chown, fsinfo, id,
          kill, leave, ln, logname, newgrp, nice, ps, renice, su, tty, uptime).
          If you don't know what the above utils do, you don't need them.
MX2       MX2 Multitasking Kernel version 2.3.0 by Fred Brooks.  MX2 is a
          multitasking environment to aid in program development for the ATARI
          ST.  It was developed in Modula-2 but can be used with any language
          such as C, BASIC, or PASCAL.  Suggested system minimum requirements
          are 1 MEG of memory with a double-sided disk drive.  A hard disk
          drive will greatly improve system performance.
OFAKE     OFAKE.XFS by Eric Smith.  A number of people have mentioned that it's
          a shame that MiNT 0.9's universal drive (drive U:) isn't accessible
          from Neodesk or from the TOS 1.0 desktop.  So, here's a quick hack to
          allow another drive letter to be a universal drive.  NOTE: This won't
          work with versions of MiNT prior to 0.9, which never try to load .XFS
          files.
RAMFS     RAMFS.XFS: A resizable ramdisk file system for MiNT version 1.4 by
          Thierry Bousch.  This ramdisk allocates dynamically as much memory as
          it needs.  As you might expect, it won't work too well with programs
          which allocate all the memory.  This disk installs itself as
          directory U:\ram if you're using MiNT 1.08 or newer otherwise it
          installs as drive R.  Postcardware!


   *************************************************************************
   **                   Atari ST NetWorking Utilities                     **
   **                         /UTILITY/NETWORK/                           **
   *************************************************************************

APPLE_ST  A couple of programs (one for the Atari and one for the Apple) that
          will let you network an Atari ST and an Apple II together via the
          serial ports.  All the docs are in German.
C_64      A couple of programs (one for the Atari and one for the Commodore 64)
          that will let you network an Atari ST and a Commodore together via
          the serial ports.  Includes both English and German versions.
MIDINET   ANET by Fred Brooks is an attempt to try to make a very simple ST to
          ST link via the MIDI port.  The main objective was to make it as
          transparent as possible to the user and to other programs.


   *************************************************************************
   **                          Atari ST  Patches                          **
   **                           /UTILITY/PATCH/                           **
   *************************************************************************

ARRFIX15  ARROWFIX version 1.5 patches the Scroll routines of GEM and removes a
          bug that causes the system to interpret a single mouse click as two
          seperate mouse clicks.  The program and all docs are in German.
D1034_10  A patch program by Bob Luneski of Oregon Research that will upgrade
          your Diamond Edge version 1.03 or version 1.04 to version 1.10.
          Enahancements: Diamond Edge was always Falcon compatible, but now
          it's user interface is specifically enhanced for the new Falcon/
          MultiTOS 3d look.  A new version of Diamond Mirror will be created on
          completion of the patch program.  It fixes a number of bugs including
          the date problem on some month rollover.  Requires the ORIGINAL
          Diamond Edge disk.
DB314PAT  A patch program from Oregon Research that will upgrade any Diamond
          Back 3 version 3.0x to version 3.14.  Requires the original Diamond
          Back disk.
DD2UPD0A  This is a patch by Keith Gerdes of Trace Technologies that will
          upgrade Data Diet version 2.0 to version 2.0a.  This upgrade fixes a
          few bugs.
DD2UPD10  This is a patch by Keith Gerdes of Trace Technologies that will
          upgrade Data Diet version 2.0a to version 2.1.  This upgrade fixes a
          few bugs.
DE100102  A patch program by Bob Luneski of Oregon Research that will upgrade
          your Diamond Edge version 1.00 to version 1.02.
DE102103  A patch program by Bob Luneski of Oregon Research that will upgrade
          your Diamond Edge version 1.02 to version 1.03.
EDOS_122  A patch program from Anodyne Software that will upgrade all previous
          versions of ExtenDOS to version 1.22.  It fixes several bugs in
          previous versions.
EPRO_20B  A patch program from Anodyne Software that will upgrade all previous
          versions of ExtenDOS Pro to version 2.0B.  It fixes several bugs in
          previous versions.
MAGIXROM  MAGIXROM [released 18-Dec-1994] is a nifty little utility program
          that allows you to put MagiX (MagiC??) on ROM.  Now works with PAK/3.
          Allows you to put both MagiX and old TOS into ROMs (with 32 bit
          systems).  All documentation is in German.
POOLFIX   Poolfix 4 patches a bug in TOS.  This bug doesn't bite very often.
          You probably haven't ever seen it.  It happens when programs use
          Malloc a lot and you have a lot of folders in your system.  (Yes,
          this bug was introduced as part of the code which got rid of the 40
          folder limit.)  The OS pool is the internal memory used by GEMDOS to
          keep track of directories, files, handles, and internal memory.
          Sometimes, GEMDOS uses only part of a block.  When there are two
          blocks that are only partly used, and the used parts would fit into
          one block, the space can be compacted to create one completely used
          block and one free block.  Unfortunately, there's a bug in the
          compaction routine.  This patch prevents that compaction routine from
          being executed and executes it's own bug free routine.
STALK304  A patch program from Gribnif Software that will upgrade STalker
          version 3.03 to version 3.04.  It fixes several bugs in previous
          versions.
STENO210  A patch program from Gribnif Software that will upgrade STeno version
          2.0x to version 2.10.  It fixes several bugs in previous versions.
STENO211  A patch program from Gribnif Software that will upgrade STeno version
          2.10 to version 2.11.  It fixes several bugs in previous versions.
STOSUP26  STOS + Fun School II updaters.  The three PRG files in this folder
          allow you to update a STOS Language, STOS Compiler and ST Fun School
          II disc, so that they will be compatible with the latest STE machines
          which offer TOS 1.62 in ROM.
STSFX27A  STOS Fixer version 2.7 by Robert Quezada.  This program was written
          using the AutoZest interface and GFA BASIC.  It calculates the STOS
          values required for STOS interpreter and STOS compiled programs for
          virtually all TOS versions.  Fixes several bugs in STOS.
TP206V38  A collection of TOS 2.06 patches.
WRKSUPDT  AtariWorks update - fixes spell checker and thesaurus.


   *************************************************************************
   **                     Atari ST Printer Utilities                      **
   **                          /UTILITY/PRINTER/                          **
   *************************************************************************

1WP2RTF   1WP2RTF by Jeroen Scheerder is a program that will convert 1st Word
          Plus files into RTF (Rich Text Format) files.  This converter program
          is unique in that it works off of a translation parameter file that
          could be edited to convert the 1st Word Plus files into ANY other
          format - assuming you knew the specifics of the file format you
          wanted to convert to.
ASSASIN   ASSASSIN.SYS version 1.0 by Michael F. Ellis.  Are you afraid of
          GDOS? Do you find that when you purchase a program that uses GDOS,
          you use only the fonts that came with the program?  If so, the reason
          probably boils down to the ASSIGN.SYS file.  Many people find it
          either too difficult or too much trouble to customize the ASSIGN
          file.  With ASSASSIN.SYS, you never have to worry about editing
          another ASSIGN file, ASSASSIN will do it all for you.  Shareware!
AW_ALIN2  Atari Works Landscape Printer Alignment template by Michael Hebert.
          This folder contains LANDALIN.STW and PR_ALIN2.STW.  The first is a
          landscape printer alignment template for 1.0 inch margins. The second
          is an AtariWorks document describing how the author finally figured
          out the offsets for his HP-4L printer.
CASSETE   Cassette Label Maker version 1.2 by Scott Sanders/Software
          Development Systems.  This program will run under either medium or
          hi-res and any ATARI computer with 512k or more.  It produces labels
          which neatly fold up into any standard cassette case.  Label Format A
          has three panels; one three lines long, one four lines long, and one
          fifteen lines long.  Label Formats B & C has one extra panel 15 lines
          long.  Shareware!
CASSETTE  Cassette version 3.2 by Cornelius Bode is a program that will print
          out labels for cassette tapes.  The program and all documentation is
          in German, however the operation of this program should be fairly
          straightforward.
CASSLBLE  Cassette Label Maker by David W. Douglass is a program to make
          cassette labels.  It's a GEM based program that allows you to create
          a printed label of the appropriate size to include in a standard
          plactic audio cassette box.  The program works with both color and
          monochrome monitors and is configurable to work with just about any
          dot matrix printer that has provisions for different character
          pitches.
CAVELABL  The Caverns Disk Labeler Version 0.0000001 by "The Keeper" (note: the
          "Keeper" referred to here is NOT the Crawly Crypt Keeper) is a
          program that will print out floppy disk labels.  This program only
          works with Epson printers (and Epson compatibles).
EPSJET    EpsJet version 1.0 by David L. Bailey is an Atari ST software Epson
          MX-80 emulator for the DeskJet.  EpsJet takes output destined for an
          Epson printer and converts it to a form that can be properly printed
          on a Hewlett-Packard DeskJet.  Not all Epson features are
          implemented, and graphics output will be no better in resolution than
          it would be on an Epson MX-80.  Programs using GDOS output and the
          FX80.SYS driver should work with EpsJet to print MX-80-resolution
          graphics.
FONT_FIX  The GDOS\FONTGDOS Filename fixer - freeware from Dragonware.  This
          Program is designed to help users of The G_MAN V2.0 through 3.XX
          correct the most common errors in the GDOS font name standard.  If
          you do NOT own the G_MAN, this program will not help you much; unless
          you know how to make ASSIGN.SYS files manually.
FX80QUER  FX80QUER version 1.2 by Christoph Zwerschke is a public domain
          utility program designed to be used with the Epson FX80 (and
          compatible) printers.  The program and all documentation is in
          German.
F_PRINT   FPPRNT by Frank Pawlowski is a little printer character output
          routine that patches into the TRAP 13 vector to just output
          characters to the printer port a bit more efficiently than TOS does.
          After some testing it is quite clear that printers that can accept
          data at a high rate do indeed perform better with this patch
          installed.
GD_CHECK  GDOS-Check version 2.0 by Christoph Bartholme is a small utility that
          tests a GDOS installation.  More precisely, it tests the installed
          GDOS driver and finds out how well IdeaList version 3.5 can be used
          with it.  The program and all documentation is in German.
GEMLABEL  GEMLABEL version 2.0 by Jeep Watson is the combination of 3 or 4
          general purpose labeling utilities that the author wrote for his
          businesses.  GEMLABEL has more features and is easier to use and more
          attractive than many of the other label programs.  It was written for
          Monochrome systems as it is primarily a business program.  The source
          code and custom versions are available from the author for a fee.
GSP32FUK  GEM Spooler version 3.2 by Steven Van Rossen, Marc Billiet is a
          universal printer spooler for Atari computers.  Everybody who prints
          a lot knows the problem: it takes a long time before the computer is
          available again because the computer has to wait for the slow
          printer.  GEM Spooler captures the printer output, returns control of
          the computer to the user, and spools the printer data out IN THE
          BACKGROUND.  Shareware.
HP4LCPX   HP4L.CPX version 1.00 by Arvin Schnell is a small utility to set some
          features of your HP LaserJet 4L Printer.  At the moment it sets only
          those features which control the quality of the output (EconoMode,
          REt and Density).  Since these features can only be set through
          software, and the only software Hewlit Packard supplies is in DOS/
          Windows format, this utility is ESSENTIAL for any HP4L (or
          compatible) owner.
HPJ2PS    Hewlet Packard Deskjet Dump to PostScript Converter by Richard Parr &
          Eliot Miranda.  This program was written to allow Atari Cubase users
          to print out scores on PostScript printers.  It does this by
          converting the 300dpi HP LaserJet output that Cubase can generate and
          encoding this as a PostScript bitmap.  Run-length encoding techniques
          are used to make the files produced a reasonable length (they are
          usually around a quarter of the size of the raw HP output). Freeware!
HP_5260   HP 5260 Labeler by Chet Walters is a label printing program.  This
          program is specifically for use with HP DeskJets and Avery three
          across ten down 5260 cut sheet labels or clones.  Shareware!
IDEADVI   This is the complete manual for IdeaList version 3.51 in DVI (TeX)
          Format.  This manual is in German.
IDEALIST  IdeaList version 3.51 by Christoph Bartholme is a versatile tool used
          to print out ASCII files and files in 1st Wordplus Format or RTF.
          When used, it can save up to 80% of paper consumption.  Also because
          it has a printer driver exclusive to your own printer you can control
          all of your printer fuctions and you can also print the files in
          better quality.  In other words it takes all the hard work out of
          printing files.  Includes both English and German version of the
          program and documentation.  Shareware!
IDEA_HYP  An online reference and help guide for IdeaList 3.5, Blinex, IdeaBook
          and IdeaForm im HYP-Format.  Requires ST-Guide to display.
ILBUGFIX  This is a patch for IdeaList version 3.51.  This patch fixes a bug in
          the preview display mode of IdeaList.  The docs are in German.
IMG_PRT   Image Printer/Cataloger version 2.2 by Rick Hollm.  This program is a
          GEM Image file printer similar to IMG_CAT by Chet Walters, but this
          program is free.  It places 12 images per page along with the name of
          the image and its size.  It can handle up to 12 pages of images in
          the path you select.  The program will also print the path and a user
          editable title on the top of each page.  You must have GDOS or GDOS+
          with a assign.sys file with 10 & 12 point fonts defined in the first
          position or one of the fonts must be named Swiss.  The program will
          print various status reports on the screen as it is printing so you
          can follow along.
IPRN_040  iPRN version 0.40 by Peter Missel is a printer output speeder with
          status control via interrupt.  This shareware utility will GREATLY
          speed up the rate at which your computers sends data out the printer
          port.  Ideal for use with modern printers that can accept data at a
          higher rate of speed than their predecessors.  All docs are in
          German.
JET_LOPE  JET-LOPE 2 by Barney Poston is a program to address/print envelopes
          using the Hewlett Packard DeskJet 500 printers.  It allows access,
          from the keyboard, to the internal typefaces of the printer.  You can
          select fonts independently for the return address and recipient
          address.  You may print one envelope at a time inputing addresses as
          you go, use recipient addresses loaded from a database or you may
          print a recipient address loaded from the Atari Clipboard.
KUVERT    KUVERT version 1.10 by Georg Conrad is an envelope printer for use
          with the Panasonic KX-P1080 (and compatible) printer.  The program is
          in German, but there is VERY LITTLE text.  An envelope is presented
          graphically on the screen and you fill in the blanks.
LABELMAX  Label MAX version 1.0 by Jacob W. Janovetz/Mediaeval Software is a
          disk label printing program.  Label MAX is so easy to use, it really
          needs no explanation of how to use it.  Just run it and you should
          have no trouble at all getting it to work.  Shareware!
LALOPE37  LaserLope version 3.7 by Barney Poston.  This is an UPDATE to the
          LaserLope HP4 Envelope printing utility.  It contains ONLY the new
          program but does NOT contain any docs.  You will need an older
          version of LaserLope if you want the docs.  The update info says
          "Several bugs were identified and corrected".
LBLMAKER  Label Maker by Frank P. Nagle is a disk label program that will allow
          you to generate graphics or regular print labels, and also print
          complete directory listings of your 3-1/2" disks.  It is completely
          mouse/menu driven with little need for use of the keyboard except to
          enter a new disk volume name.  The program takes complete advantage
          of GEM and TOS.  The source code is available from the author for a
          small fee.
L_EXPERT  Label Expert version 5.0 by Jörg Trojan is a flexible label printing
          program for the Atari ST series of computers.  The program and all
          documentation is in German.  Shareware!
M_SPOOL   Magic Spooler by Emanuel Möcklin is more than a printer spooler.  It
          makes it possible to print to a file from most programs.  Moreover
          it makes it possible, to print files in the background.  As these two
          functions can be active at the same time, you can first print to a
          file and then print this file (on the printer naturally), that means
          you can use your HD as buffer for the spooler.  Conatins English and
          German version of the program and documentation.
PCAG      The SilkWare Print Control Accessory Generator (PCAG) by Mark Slagell
          is a truly unique utility.  Given a simple ASCII configuration file
          that you supply (an example is provided), it generates a desk
          accessory to send any instructions you want to your printer.  There
          may be up to 12 instructions defined, each having a length of up to
          39 bytes.  Shareware!
PRHP12    PRHP is a text file printing utility for use with HP Deskjet and
          Deskjet+ printers.  It allows printing in many various modes in
          portrait or landscape orientation.  In portrait mode, characters per
          line range from 80 to 154 and lines range from 60 to 120.  In
          landscape mode, characters per line range from 102 to 204 and lines
          range from 42 to 84.  Supports draft or letter quality printing in
          all modes.  Prints all pages back to front with a header showing
          date, time, file name, and page number.  Allows the left margin width
          (or top margin width in landscape mode) to be set.  Freeware!
PRTMATIC  Print-A-Matic version 1.0 by Michael H. Douville is a utility that is
          intended to enable a easy way to control your printer. These features
          include: 1) Sending control codes to your printer to enable certain
          features.  2) To be able to group these features together as macros
          and use them.  3) To be able to save the configuration for repeated
          use.  4) To enable printing of a text file from the program.  5) A
          TEST option that allows you to see what text will look like on your
          printer, BEFORE you print the file.
PSCAPT10  PS Capture version 1.00 by Charles S. Smeton is a desk accessory that
          will allow the output from the GDOS PostScript driver (supplied with
          TimeWorks Desktop Publisher ST) to be redirected from the RS-232 port
          to a disk file.  The file of PostScript commands can then be printed
          with Imagen's UltraScript or with GhostScript or on a PostScript
          compatible Laser Printer.  Shareware!
SDUMP1_5  Bob's Screen Dump Utility version 1.5 by Bob Areddy is designed for
          use with an EPSON Lq1500 or compatible printer (such as the Panasonic
          1124).  It will work in Medium or Low resolution and create a 16
          shade dump of your screen when Alt-Help is pressed.  This supercedes
          the Atari dump of only 8 shades (which doesn't take advantage of the
          24 pins in your printer!).  Shareware!
STICKER3  Sticker III by Shapoor E. Engineer is a label printing program that
          will allow you to print out labels that have text and graphics on
          them.  You can put a logo or something on your label and give it that
          customized look.  Shareware!
STOWAWAY  Stowaway! version 1.2 by Jim Thompsen is a disk label printing
          program that the author originally wrote for Wizztronics to use.  The
          program uses labels specifically made for the 3-1/2" disks on tractor
          feed ( 2-3/4" square ).   The print functions were designed for Epson
          FX compatibility.  Shareware!
TRANSPRT  The TRANSPORTER Font Dowloader version 0.90 is a very easy to use
          printer utility for displaying the various fonts that are built in
          the Epson and Star printers.   It also will download various
          alternate character sets to your printer via the "Download Icon".
          Shareware!
TXTBK101  TeXTBOOK version 1.01 by Paul D. Lyon is a utility that prints ASCII
          files sideways; two 5.5" X 8.5" on an 8.5" X 11" sheet.  Requires
          Speedo GDOS, and a valid SpeedoGDOS printer driver using 8.5 x 11
          inch paper, and either ST High or ST Medium screen resolution.
UFSL_097  Universal Fontselector (UFSL) by Michael Thänitz is a font selector
          program for Speedo GDOS.  The program and all documentation is in
          German.  Freeware!
ULTIMADE  Ultimade Label version 1.0 by Torsten Fülling proclaims to be the
          ultimate label editor/printer for 3.5 inch and 5.25 inch floppy
          disks.  The program and all documentation is in German.
VIEWFONT  Fontview by SKWare One & S. K. Webb is a GDOS font viewer program,
          and it's public domain.  It will run in all STe resoltions (maybe
          more), but looks best in monochrome.  It has two .RSC files, one for
          color monitors (FNTVIEWC.RSC) and one for monochrome monitors
          (FNTVIEWM.RSC).  It reports all data from the GDOS font header and
          features the GDOS Typewriter described below. IT DOES NOT REQUIRE THE
          GDOS PROGRAM to show GDOS fonts on-screen!
YAPS      Yet Another Printer Spooler (YAPS for short) is a little program that
          patches itself into the operating system (low level BIOS calls) and
          waits for someone to send a character to the printer.  When that
          happens, it checks to see if your printer is busy printing a
          character.  If the printer is not YAPS sends it a character to print.
          However, if it is busy, YAPS will store that character in a buffer
          and return control of the computer to your program.  No printing long
          documents will not tie up your computer.


   *************************************************************************
   **                   Atari ST Screen Saver Utilities                   **
   **                          /UTILITY/SCRNSAVR/                         **
   *************************************************************************

COLTOAST  Color Toasters by Thorsten Pohlmann is a color module for use with
          the Before Dawn screen saver.  It is another take off on the popular
          "flying toasters" theme.  It uses 16 colors so one would assume it is
          best viewed in a video mode with at least 16 colors.  The
          documentation is in German.
MOVIES12  Movies at Night by Anthony Watson is a unique screensaver system that
          plays animated 'movies' when you are not using your computer.  The
          system is composed of two parts; A Screensaver (version 1.2) utility,
          and a Movie Construction Set (version 1.1).  The Movies at Night
          screensaver module will work in ST Low or ST Medium graphics modes
          only.  The construction set operates only in ST Medium.  The screen
          saver utility will work as an Extendosave module for Warp 9 (Version
          3.70 or later), or as a standalone screensaver, depending on how it
          is installed.  Shareware!
STSAVE27  The Soft-Sci Screen Saver by Michael Crisafulli is a screen saver
          that can be run by itself or as an Extendosave module for Warp 9.
          When it is active it displays a black screen with a small picture
          bubble or balloon which moves continuously, bouncing off the edges of
          your screen.  The picture your Saver displays can be different from
          every other one.  In fact, it can be different every time you boot
          your computer.  The installation program can automatically select a
          new image specification for the next boot-up.  Shareware!


   *************************************************************************
   **                      Atari ST System Utilities                      **
   **                          /UTILITY/SYSTEM/                           **
   *************************************************************************

ANTIBOMB  Antibomb by Greg Baker.  If you're tired of the cherry bombs or
          mushroom clouds displayed when a program crashes then you'll find
          this utility essential.  It replaces the bombs with a user friendly
          alert box that identifies the error in English.  It runs from the
          Desktop or from the AUTO folder.  For all STs, all resolutions.  The
          source code is available from the author for a small fee.
AV380     Ascii-View version 3.80 by David M. Seberg is an ascii text viewing
          program that was developed to replace the [Show]-[Print]-[Cancel]
          feature of the ST's Desktop.  It does so by allowing the user to
          easily view an Ascii text file with a host of features not available
          from the ST's Desktop.  Ascii-View will load any ascii file and
          display that file on a 80 column by 23 line screen.  Ascii-View
          supports Medium and High resolution.  Shareware!
CLARISSA  The Supreme Software Document Displayer version 1.00 by Chris Sharp.
          This program is somewhat similar to the Revenge Document Displayer
          and the Standalone Stosser Document Displayer but it features many
          more options including music, picture and snapshot display, etc.
          Shareware!
CLIP_CPX  Atari Clipboard CPX version 0.9 by Scott Sanders/Software Development
          Systems.  The Atari Clipboard system is built around two system calls
          scrp_read() and scrp_write().  They don't actually read or write
          information to the clipboard, they just let you access the pathname
          where the clipboard is located.  Simply put, this CPX lets you better
          manage where your clipboard is located (what drive and path) and
          gives you some other options like clearing the directory on bootup
          and whenever else you choose.  Freeware!
DSKMRF10  DeskMorf version 1.0 by David E. Rutherford alters the appearance of
          the GEM windows, icons and dialog box buttons to give them a "3-D"
          look.  Any program that uses these objects will display them in "3-D"
          as well.  Instead of inverting the color when a button is selected,
          DeskMorf depresses it, and then releases it when it's deselected.
          All the window elements and buttons are displayed in individually
          selectable colors ( on a color monitor ), or patterns ( on a mono
          monitor ) and can be changed using DeskMorf.ACC.  Shareware!
FONTLOAD  Loader by Greg White is a program which lets you replace the existing
          system font with another.  One sample font, SLASHER.FED, is included.
          Run loader from the desktop.  A file selector box will appear, and it
          will prompt you for the font to load.  Select the font, and when you
          return to the desktop the font you have chosen will be the new system
          font.
FUJI      Fuji Desk! is free!  It comes to you courtesy of Chet Walters.  I
          won't tell you what it does, but stick in your AUTO folder and
          reboot.  It works in all three resolutions of any 520, 1040, or Mega
          ST.  You can also run it from the desktop any old time.  Fuji Desk!
          works best if run early in the AUTO folder.
FUNKALRT  Funk Alert! version 1.0 by Charles F. "Godfather of Soul" Johnson is
          a tiny program (it uses less than 1K when installed!) that assigns
          the buttons in GEM alert boxes to the function keys F1, F2, and F3!
          This means that any program that calls the GEM AES form_alert()
          routine (i.e. almost _every_ GEM program) now has built-in, easy to
          remember "hot key" equivalents for its alert box buttons!  Shareware!
GEMBOOT   GEM Boot version 1.11 by  Konrad A. Hahn serves as a plaster for the
          old TOS problem: "the 40 folder limit".  The so called "40 folder
          limit" is a two fold TOS bug.  The system crashes are caused by
          GEMDOS being "out of system memory".  GEMDOS has a limited system
          memory area of 3000 words used for memory descriptors, media
          descriptors, directory cache blocks, etc.  GEM Boot protects the
          system by linking fresh cache blocks to the system and scanning all
          hard disk directories with Fsfirst()-Fsnext().  Thus GEMDOS is forced
          to build up a complete, errorfree directory cache tree.
GEMLOAD   GEM_LOAD version 1.3 by Markus Pristovsek is a utility program that
          graphically displays the "system load".  In other words, it shows a
          graphic representation of how hard the system is working at any given
          time.
GEMRAM16  GEMRAM version 1.6 by Martin Osieka installs a copy of GEM in RAM.
          This is necessary if you use patch programs like WINX, ARROWFIX or
          SHBUF.  Another benefit of having GEM in ram is that you will gain a
          little extra performance (for example, a Falcon will speed up about
          7%-12% with the OS running in ram as opposed to it running from rom).
JAMES     James,the Desktop-Butler version 1.0 by Pascal Fellerich is more than
          an improved Control Panel: James is the ultimate 'desktop-butler'.
          It makes the daily work with the ST easier.  You can now adjust the
          keyboard parameters, ship your harddisk, write-protect any drive,
          detect and destroy viruses and a lot more without having to boot
          numerous accessories!  Shareware!
JARXXX    JARxxx: Cookie Jar Manager by Dan Wilga.  What JARxxx does is take
          the "dirty work" away and simplify the whole process of using the
          Cookie Jar.  It provides a standard way for programs to look for
          cookies and create new ones.  It also establishes a new jar, as large
          as you want it to be, for all future programs to use.  JARxxx is very
          easy to install.  All you have to do is copy JARXXX.PRG into the AUTO
          folder of the disk you normally boot from.  Then, rename the program
          so that the "XXX' is a number.  This number, which is the quantity of
          new cookies to make space for in the jar, can be anywhere from 0 to
          999.
LGSEL     The Little Green Selector version 1.1 by Charles F. Johnson is a
          complete replacement for the dreaded GEM item selector.  Once it's
          installed, all programs that call the GEM item selector will end up
          using the vastly improved Little Green Selector instead.  You can
          install it at bootup time by placing it in an AUTO folder, or run it
          from the desktop at any time after bootup.  Shareware!
MAUSWIND  Maus-Window version 1.25 by Thomas Binder.  When Maus-Window is
          active and the mouse-cursor resides over a non-active window, the
          window will automatically be topped.  This is achieved by simulating
          a mouse-click using the AES-call appl_tplay().  This conforms to GEM
          and causes no problems with "clean" applications.  Contains both
          English and German documentation.  Donationware!
MB49_BIN  MasterBrowse version 4.9 by Michel Forget is a shareware file viewer/
          browser that is very fast.  It has too many features to list!
NEWDATE   NEW DATE III, the Battery Emulator by Ruiz Lionel.  Do you not have a
          battery backed clock and ever wished to have the date conserved when
          you boot-up your ST or your STe?  Now it is possible easily, by
          booting this program with your disk disprotected or your hard-disk.
          It is simple, it saves on the disk the date you entered once.  When
          you boot-up again during the same day, you'll have the pleasure to
          have the date conserved.  And if you boot-up just one day after,
          you'll just have to press the "+" key to refresh the date.
STUFFER   DC STuffer version 0.9 by Keith Gerdes allows you to load in more
          than six desk accessories (DAs) into GEM.  DC STuffer acts just like
          the desktop, you can open up any desk accessory, and if it does not
          take complete control of the desktop (or the program you are running)
          you can go to DC STuffer again to open another desk accessory.  This
          version has a limit of 32 DAs.  Shareware - registering removes the
          32 DA limit.
TYPE_IT   Type version 2.0 by SKWare One.  To easily read any text file in any
          rez, TYPE_IT.PRG, the fastest loading and displaying text reader
          program around!  Falcon-compatiable and it works from any resolution,
          including TrueColor.  TYPE_IT gives you 80-col display even in 40-col
          resolution, with fast forward and reverse scrolling, and it's less
          than 22 Kbytes.  Freeware!
WINX22    Winx version 2.2 by Martin Osieka expands GEM in TOS versions up to
          version 4.04 to include some of the features which are available in
          MultiTOS.  From users point of view this means (among other stuff)
          more windows allowed, enhanced control elements for background
          windows and an expanded user interface.  Additionally some bugs and
          deficiencies of the different GEM versions have been removed or
          repaired.  Complete German AND English docs included!


   *************************************************************************
   **          Atari ST Virus Protection and Elimination Programs         **
   **                          /UTILITY/VIRUS/                            **
   *************************************************************************

ANTIDOTE  Antidote version 2.3 - the Professional Virus Killer by Kai Trygve
          Holst and Geir Oyvind Vaelidalo.  This virus killer program
          recognizes 188 different NON-virus boot sectors, 31 different virus
          infected boot sectors, 96 different NON-virus resident programs, 5
          Anti-Viruses, 5 Link Viruses, 27 different Cookies, and 24 different
          packers.  It should be hard to get a false positive with this
          program.  Shareware!
CLINIC    Clinic version 2 by Claude Grenier is a tool that will help you
          recover data from a damaged disk.  It will also check for (and
          eliminate) boot sector viruses.  It has a "safety net" feature in
          it's virus elimination routine such that if you accidentally destroy
          a non-virus executable boot sector, you can restore the original boot
          sector later.
HOSPITAL  Hospital - A suite of virus prevention and detection programs for the
          Atari ST by Neil Forsyth.  These programs have been developed to
          detect and prevent the spread of viruses.  The programs apply
          primarily to floppy disk boot sector viruses but some do have a wider
          application.
SVKP0_1   This is an alphatest copy of a brand new peice of virus killing
          software from Sircware, named: Sircware VK PRO.  This version
          recognises 61 bootsector viruses.  VK PRO is the only ST virus killer
          in the world that not only recognises Link viruses, but can fully
          repair infected files.