home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Crawly Crypt Collection 2
/
crawlyvol2.bin
/
program
/
c
/
cdbind01
/
cdromio.h
< prev
next >
Wrap
C/C++ Source or Header
|
1994-05-16
|
9KB
|
286 lines
/*
CD-ROM Fcntl()s and structures
Copyright (c) Julian F. Reschke (jr@ms.maus.de), 16. Mai 1994
Free distribution and usage allowed as long as the file remains
unchanged.
These Fcntl() opcodes provide a *nix-like interface to the CD-ROM
specific functions. They can be used either with a MiNT specific
CD-ROM device driver or with new MetaDOS BOS lowlevel drivers. For
MiNT mounted device drivers, the interface is
Fcntl (short filehandle, short opcode, long arg)
(with filehandle a handle to the opened CDROM device driver) or
Dcntl (short opcode, char *name, long arg)
(with name being the name of a file or directory on the mounted CD
file system).
For MetaDOS BOS drivers, the interface is
xbios (0x37, short device, long magic, short opcode, long arg)
where 'device' is a MetaDOS XBIOS device number ('A'..'Z') and 'magic'
is 'FCTL'. With MetaDOS version >= 2.40 and the appropriate DOS
drivers, you can also use the GEMDOS call Dcntl (thus being compatible
to future MiNT drivers), because MetaDOS 2.40 implements some of the
new GEMDOS calls and Atari's ISO9660F.DOS passes all Dcntl calls right
down to the BOS driver.
Note that there is an 'old' CD-ROM audio interface for MetaDOS, but
the commands depend on the custom CDAR 504 controller and can't be
fully implemented for SCSI drives (in fact they are, with some
restrictions). Consult the MetaDOS developers manual for further
information.
In both cases, EINVFN (-32L) is returned for unknown opcodes.
Note that MetaDOS drivers return EUNKNOWN (-3) if XBIOS opcode 0x37 is
not supported!
Drivers supporting this interface (send updates to jr@ms.maus.de):
MetaDOS BOS drivers (driver name, company):
HS-CDROM.BOS
Hard &Soft, Castrop-Rauxel, Germany
Generic driver for SCSI-CDROMs connected to ACSI or SCSI and
for the CDAR504
FX001???.BOS, CDU33???.BOS
Gellermann & Fellmuth GbR, Berlin, Germany
Drivers for Mitsumi drives connected to internal or parallel
interface.
MiNT device drivers (driver name, company):
-
*/
#ifndef _CDROMIO_H
#define _CDROMIO_H
#ifndef BYTE
#define BYTE unsigned char
#endif
typedef union
{
struct {
BYTE reserved, minute, second, frame;
} msf;
long lba;
} cd_ad;
/* Data structures used */
struct cdrom_msf
{
BYTE cdmsf_min0; /* start minute */
BYTE cdmsf_sec0; /* start second */
BYTE cdmsf_frame0; /* start frame */
BYTE cdmsf_min1; /* end minute */
BYTE cdmsf_sec1; /* end second */
BYTE cdmsf_frame1; /* end frame */
};
struct cdrom_ti
{
BYTE cdti_trk0; /* start track */
BYTE cdti_ind0; /* start index */
BYTE cdti_trk1; /* end track */
BYTE cdti_ind1; /* end index */
};
struct cdrom_tochdr
{
BYTE cdth_trk0; /* start track */
BYTE cdth_trk1; /* end track */
};
struct cdrom_tocentry
{
/* input parameters */
BYTE cdte_track; /* track number or CDROM_LEADOUT */
BYTE cdte_format; /* CDROM_LBA or CDROM_MSF */
/* output parameters */
unsigned cdte_adr:4; /* the SUBQ channel encodes 0: nothing,
1: position data, 2: MCN, 3: ISRC,
else: reserved */
unsigned cdte_ctrl:4; /* bit 0: audio with pre-emphasis,
bit 1: digital copy permitted,
bit 2: data track,
bit 3: four channel */
BYTE cdte_datamode; /* currently not set */
cd_ad cdte_addr; /* track start */
};
struct cdrom_subchnl
{
/* input parameters */
BYTE cdsc_format; /* CDROM_MSF or CDROM_LBA */
/* output parameters */
BYTE cdsc_audiostatus; /* see below */
unsigned cdsc_resvd: 8; /* reserved */
unsigned cdsc_adr: 4; /* see above */
unsigned cdsc_ctrl: 4; /* see above */
BYTE cdsc_trk; /* current track */
BYTE cdsc_ind; /* current index */
cd_ad cdsc_absaddr; /* absolute address */
cd_ad cdsc_reladdr; /* track relative address */
};
struct cdrom_mcn
{
BYTE mcn_audiostatus; /* see above */
BYTE mcn_mcn[23]; /* Media catalog number as ASCII string */
};
struct cdrom_tisrc
{
/* input parameters */
BYTE tisrc_track; /* track number */
/* output parameters */
BYTE tisrc_audiostatus; /* see above */
BYTE tisrc_tisrc[23]; /* Track International Standard
Recording Code (ASCII) */
};
struct cdrom_volctrl
{
BYTE channel0; /* volume level 0..255 */
BYTE channel1;
BYTE channel2;
BYTE channel3;
};
struct cdrom_audioctrl
{
/* input parameters */
short set; /* 0 == inquire only */
/* input/output parameters */
struct {
BYTE selection;
BYTE volume;
} channel[4];
};
struct cdrom_read
{
long cdread_lba; /* logical block address */
char *cdread_bufaddr; /* buffer pointer */
long cdread_buflen; /* byte count */
};
/* CD-ROM address types */
#define CDROM_LBA 0x01
#define CDROM_MSF 0x02
/* SUB Q control bits */
#define CDROM_AUDIO_EMPHASIS 0x01
#define CDROM_COPY_PERMITTED 0x02
#define CDROM_DATA_TRACK 0x04
#define CDROM_FOUR_CHANNEL 0x08
/* The leadout track is always 0xAA, regardless of # of tracks on disc */
#define CDROM_LEADOUT 0xAA
/* return value from READ SUBCHANNEL DATA */
#define CDROM_AUDIO_INVALID 0x00 /* audio status not supported */
#define CDROM_AUDIO_PLAY 0x11 /* audio play operation in progress */
#define CDROM_AUDIO_PAUSED 0x12 /* audio play operation paused */
#define CDROM_AUDIO_COMPLETED 0x13 /* audio play successfully completed */
#define CDROM_AUDIO_ERROR 0x14 /* audio play stopped due to error */
#define CDROM_AUDIO_NO_STATUS 0x15 /* no current audio status to return */
/* CD-ROM Fcntl opcodes */
/* Get block number of first sector in last session of a multisession
CD. Argument points to a LONG. Used by iso9660f.dos */
#define CDROMREADOFFSET (('C'<<8)|0x00)
/* Pause audio operation */
#define CDROMPAUSE (('C'<<8)|0x01)
/* Resume audio operation */
#define CDROMRESUME (('C'<<8)|0x02)
/* Play audio. Argument points to cdrom_msf structure */
#define CDROMPLAYMSF (('C'<<8)|0x03)
/* Play audio. Argument points to cdrom_ti structure */
#define CDROMPLAYTRKIND (('C'<<8)|0x04)
/* Read header of table of contents. Argument points to cdrom_tochdr
structure */
#define CDROMREADTOCHDR (('C'<<8)|0x05)
/* Read a toc entry. Argument points to cdrom_tocentry structure */
#define CDROMREADTOCENTRY (('C'<<8)|0x06)
/* Stops spindle motor */
#define CDROMSTOP (('C'<<8)|0x07)
/* Starts spindle motor */
#define CDROMSTART (('C'<<8)|0x08)
/* Eject medium */
#define CDROMEJECT (('C'<<8)|0x09)
/* Sets audio playback volume. Argument points to cdrom_volctrl
structure. Only for compatibility to Unix drivers, see also
CDROMAUDIOCTRL */
#define CDROMVOLCTRL (('C'<<8)|0x0a)
/* Read subchannel information. Argument points to cdrom_subchnl
structure. */
#define CDROMSUBCHNL (('C'<<8)|0x0b)
/* Read Mode 2 or 1 sectors. Argument points to cdrom_read
structure. Blocks have either 2336 or 2048 bytes. */
#define CDROMREADMODE2 (('C'<<8)|0x0c)
#define CDROMREADMODE1 (('C'<<8)|0x0d)
/* Lock eject mechanism */
#define CDROMPREVENTREMOVAL (('C'<<8)|0x0e)
/* Unlock eject mechanism */
#define CDROMALLOWREMOVAL (('C'<<8)|0x0f)
/* Control audio settings. Argument points to cdrom_audioctrl
structure */
#define CDROMAUDIOCTRL (('C'<<8)|0x10)
/* Read Digital Audio (red book) sectors. Argument points to
cdrom_read structure. Blocks have 2352 bytes. */
#define CDROMREADDA (('C'<<8)|0x11)
/* Read media catalog number. Argument points to cdrom_mcn
structure */
#define CDROMGETMCN (('C'<<8)|0x13)
/* Read track international standard recording code. Argument points
to cdrom_tisrc structure */
#define CDROMGETTISRC (('C'<<8)|0x14)
#endif _CDROMIO_H