FAILED_SERVICE_INSTALL=Failed to Install NT SERVICE
NOT_IE1=on your computer. \nVersion
SD_STR_20130=Creating Icons....
SD_STR_20141=This version of Diskeeper is for Windows NT " + szNtProductType + " only.
INST_COMP=Installation is now complete. If you would like to read the Readme file or start Diskeeper, check the appropriate box(es) below, then click Finish.
DO_REG=Setting registry entries.
NEED_UNINST_DCOM=Setup has found that you have an earlier version of DCOM than is required by \nDiskeeper in order to work correctly. Setup can uninstall DCOM. \nOnce this is done, you will need to reboot your machine. Setup will continue \nafter reboot.\n\nDo you want to uninstall DCOM? If you answer NO, Setup will exit.
DCOM_INSTALL_NOGO=Unable to start the DCOM installation program. Please go to the \nMicrosoft web site and install the DCOM. Then start Setup again.\n\nSetup will exit now.
LOW_DISK_SPACE=There is not enough space available on the disk. \nPlease free up some space or change the target \nlocation to a different disk
MMC_REBOOT=MMC installation requires a reboot in order to complete \nthe installation. This part of the Diskeeper installation will \nnow exit. After reboot, setup will continue. The MMC\ninstallation will now start.
UNINST_NT_KEY=Diskeeper
NOT_IE2=is required for Diskeeper operation. \nWould you like to install Internet Explorer 5 \nat this time? If you chose not to install this \nnewer version of Internet Explorer, \nsetup will exit.
SD_STR_20120=Copying program files...
SD_STR_20131=Register
SD_STR_20142=You will need the " + szNtProductType + " CD to update your system.
TITLE_MAIN=Diskeeper for Windows 95/98 \nWorkstation version 5.0 Trialware
CANT_GET_DRIVES=Unable to get a list of valid drives.
NO_MMC2=on your computer. Version
SD_STR_20110=is not supported on Build Number
SD_STR_20121=Unable to create a directory under
SD_STR_20143=This upgrade version of Diskeeper requires that the Diskeeper 1.0X files exist on a CD-ROM. Please enter a CD-ROM drive or press cancel to end setup.
PRODUCT_KEY_NT_SRV=Diskeeper.msc
ERROR_COPY=ERROR While copying file. Error #
NOT_OSR2=This version of Diskeeper only supports OSR2 or higher \nversions of Windows 95. \n\nSetup will now exit.
DK_SIZE=1000
INSTALL_IE=Install Internet Explorer
NO_MMC3=is required for Diskeeper operation. Would you like to install this version of\nMMC? If you chose not to install this newer version of MMC, setup will exit.
SD_STR_20111=This Field Test Release is only supported on Windows NT 4.00
SD_STR_20122=Please check write access to this directory.
SD_STR_20144=Installation returned error
PRODUCT_VERSION_NT=5.00.328td
ERROR_COMPONENT=Component:
COMPANY_NAME=Executive Software
DK_UNINSTD=Diskeeper uninstall complete.
MMC_INSTALL_NOGO=Unable to start the MMC installation program. Please go to the \nMicrosoft web site and install the MMC. Then start Setup again.\n\nSetup will exit now.
NEED_SP3=Setup has determined that your machine is not running \nService Pack 3 or better at this time. You will need to \ninstall Service Pack 3 or better on you machine before \ninstalling Diskeeper. \n\nSetup will exit at this time.
FINISH_REBOOT=Setup has finished copying files to your computer. \n\nBefore you can use the program, you must restart your computer.
FOUND_9X=Setup has found Diskeeper installed. \nDiskeeper must be uninstalled before \ninstalling this version. Setup will now \nstart the Diskeeper Uninstall and then \ncontinue. If you choose not to uninstall,\nsetup will exit.
NOT_IE5=Setup has found that you are running Internet Explorer 4\nor a beta version of Internet Explorer 5. While Diskeeper \nwill run with Internet Explorer 4 and beta versions of Internet\nExplorer 5, we recommend using released version of Internet \nExplorer 5. \n\nWould you like to install Internet Explorer 5 \nat this time?
DCOM_BUILD95=47102612
SD_STR_20101=Insert Diskeeper Disk
SD_STR_20112=will not install on this computer unless Service Pack 2 or greater is installed.
SD_STR_20123=General file transfer error. Please check your target location and try again.
SD_STR_20134=OpenSCManagerA ERROR
DCOM_SPACE=3000
COMPANY_NAME16=Executive Software
NO_README=Unable to open the Readme file. \r\n Please check the destination directory and see if it is there.
CHECKING=Setup is checking for installed components. Please wait...
DCOM_REBOOT=DCOM installation requires a reboot in order to complete \nthe installation. This part of the Diskeeper installation will \nnow exit. After reboot, setup will continue. DCOM \ninstallation will now start.
REBOOT_MSG_1=Setup is almost complete. Select from the options below.
PRODUCT_NAME_REG=DiskeeperNT4
NO_MMC5=Setup has detected that you do not have Microsoft Management Console \ninstalled. This software is required in order to run this version of Diskeeper. \nSetup can install this for you now. If you do not want to install it, setup \nwill exit. \n\n Do you want to install it now?
IE4=4101111
SD_STR_20102=Please enter the drive that contains the Diskeeper disk.
SD_STR_20245=This version of Diskeeper is for Windows NT Server only. Setup will now exit.
SD_STR_20124=Setup Complete
ERROR_FILEGROUP=File Group:
ERROR_MOVEDATA=An error occurred during the move data process: %d
PRODUCT_VERSION=5.00.328td
DCOM_DESTIN_SPACE=3000
NINEX_SYSDRIVE_SPACE=1000
IM_NOT_SERVER=This version of Diskeeper is for Windows NT Workstations only.\nSetup will now exit.
REQSOFT_COMP=Setup has completed installing required software. \nDiskeeper installation will continue.
IMPORT=Important Notice
REBOOT_MSG_2=Restart now - No Boot-Time defragmentation
ERROR_CONNECT_SCMNGR=Error connecting to service manager.
NT5_NO_NO=Diskeeper is not currently supported on Windows 2000. \nSetup will now exit.
FOLDER_NAME_NT=DiskeeperWks
DCOM98_VERSION_NEEDED=47102612
IE5=5002014
SD_STR_20103=A Diskeeper 1.0 or higher CD-ROM is required.
SD_STR_20125=%P Setup is now complete.
PRODUCT_KEY_9X=Diskeeper.msc
CANT_KILL=Unable to stop the Diskeeper Service. \nManually stop the Diskeeper Service via \nControl Panel | Services and then try to \ninstall again. \n\nSetup will now exit.
NEED_ADMIN=must be installed and run from an Administrator account. Setup will now exit.
NEED_USER_LEVEL=In order for Diskeeper Server to connect \nto this computer over a network, Network \nAccess Control must be set to User Level. \nIf this is not currently the case, please see \nthe Readme.txt file for instructions before \nattempting to connect to this computer \nover the network.\n
NO_DCOM_VERSION=Unable to get DCOM version number.
ERR_NUM=Error number
REBOOT_MSG_3=Restart now - With Boot-Time defragmentation
DK_UNINSTALL_NOGO=Unable to uninstall Diskeeper. Uninstall the current version of \nDiskeeper and then start setup again. Setup will now exit.
DK=Diskeeper
SD_STR_20115=Error setting Diskeeper Version number, Setup cannot continue.
SD_STR_20346=This version of Diskeeper is for Windows NT Workstation only. Setup will now exit.
SERVICE_NOT_STOP=Error stopping the Diskeeper Service. Error: %d
NINEX_DRIVE_SPACE=1000
CURRENT_VERSION=CurrentVersion
SD_STR_20126=You can view the README file or launch %P now. Choose the options you want below.
UNINST_KEY=Diskeeper
NO_MMC=Setup has found MMC version
NOW_DCOM=Installation almost complete. \nDCOM will install now. \n\nThis part of the install will end now.
NO_START=Unable to start Diskeeper. You should be \nable to start it from the Executive Software \nprogram group in the Start menu.
REBOOT_MSG_4=No restart - No Boot-Time defragmentation on next restart
NOT_UNINSTALLED=Setup has detected that the uninstallation of DCOM was aborted.\n\nSetup will now exit.
PROG_FOLDER_WK=DiskeeperWorkstation
SD_STR_20105=Creating Program Folder and Icons....
SD_STR_20116=Failed to set default Root Key in Creating Reg DB Entries
SD_STR_20138=must be installed and run from an Administrator account. Setup will now exit.
SD_STR_20127=Click Finish to complete Setup.
PRODUCT_NAME_NT=Diskeeper 5.0 Workstation
NOT_IE=Setup has found that you do not have Internet \nExplorer version 4.10.1111 or higher installed \non your computer. This version or higher is \nrequired for Diskeeper operation. \n\nWould you like to install Internet Explorer 5 \nat this time? \n\nIf you chose not to install this newer version \nof Internet Explorer, setup will exit.
TITLE_CAPTIONBAR=Diskeeper Setup
WELL_COME=Welcome.
SETUP_NAME=Setup.exe
REBOOT_MSG_5=No restart - Boot-Time defragmentation on next restart
FAILED_LOAD_APIDLL=Failure loading ADVAPI32.DLL
WOULD_YOU_LIKE_IE5=Setup has found that you have Internet Explorer 4 \ninstalled on your machine. We recommend installing \nInternet Explorer 5.0 on your system. \n\nWould you like to do this?
SD_STR_20106=Installing
SD_STR_20139=This upgrade version of Diskeeper requires that the Diskeeper 1.0X files exist on a local CD-ROM.
SD_STR_20128=Yes, I want to view the README file.
SD_STR_20117=Failed to create
MMC_DESTIN_SPACE=3000
MMC_NOT_ABLE=Unable to start Microsoft Management Console Setup. \r\nPlease download the most \nrecent version from Microsoft and install it.\r\nThen try Diskeeper installation again. Setup will now exit.
NO_REBOOT=System failed to reboot. Please reboot the machine \nmanually.
REBOOT_PC=Your PC needs to be rebooted before continuing with this installation.\n\nChoose one of the following options and click OK to finish setup.
SD_STR_20107=Setup
SD_STR_20129=Yes, I want to launch %P.
PRODUCT_NAME16=Diskeeper9x
CREATE_FOLDER=Creating Program Folder entries
START_SERVICE_ERROR=StartService ERROR %s could not be started. Returned error = %ld
PROG_FOLDER_WKNT=DiskeeperWorkstation
DCOM95_VERSION_NEEDED=47102612
MMC_VERSION_NEEDED=501920
NO_DCOM2= on \nyour computer. Version
SD_STR_20108=Failed to set default Root Key in Checking NT Version
SD_STR_20119=Decompressing Diskeeper files failed
NO_TCPIP=Setup did not find TCP/IP installed on your machine. \nTCP/IP is required to provide a connection from \nDiskeeper Server. Install TCP/IP, or run Diskeeper \nlocally only.
UNINST_DISPLAY_NAME_NT=Diskeeper 5.0 Workstation
NTSYS_DRIVE_SPACE=1000
ERROR_FILE=File:
ERROR_VGARESOLUTION=This program requires VGA or better resolution.
SAVE_SETTINGS=Would you like to save your previous settings?
FOLDER_NAME=Diskeeper9X
CREATE_SERVICE_ERROR_NUM=CreateService ERROR %s could not be installed. Returned error = %ld
OPEN_SC_MNGR_ERROR=OpenSCManagerA ERROR
TITLE_MAIN_NT=Diskeeper for Windows NT 4.0 \n Workstation version 5.0
NO_DCOM3= is required for Diskeeper operation. \nWould you like to install this version \nof DCOM? If you chose not to install \nthis newer version of DCOM, setup will exit.
SD_STR_20109=Could not find value of
PRODUCT_KEY_NT_WRK=Diskeeper.msc
CONTINUE_U=Do you wish to continue?
REG_STAT=Creating Registry Settings...
ERROR_CREATE_FOLDER=Error creating Program Folder Shortcut.
PLS_WAIT_REG=Please wait while setup creates the Registry Entries...
PLS_WAIT=Please wait...
DISKEEPER_UP2=The MMC is still running. \n\nSetup will now exit.
CANT_DO_MEDIA=Unable to set which files to install. \n\nSetup will exit.
MMC_VERSION_NUMBER=5.0.1920
NO_DCOM5=Setup has detected that you do not have DCOM installed. This software is \nrequired in order to run this version of Diskeeper. Setup can install this for \nyou now. If you do not want to install it, setup will exit.
PLEASE_WAIT=Please wait while install copies files.
NOT_REG=Failed to create a registry setting. Error:
FOUND_DK=Setup has found Diskeeper installed. \nDiskeeper must be uninstalled before \ninstalling this version. Setup will now \nstart the Diskeeper Uninstall and then \ncontinue. If you choose not to uninstall\nSetup will exit.\n\nWould you like to uninstall Diskeeper at \nthis time?
COM_CHANGE_YN=This setup will change the DCOM Default Authentication Level \nto Connect and the DCOM Default Impersonation Level to \nImpersonate. This version of Diskeeper needs these settings in \norder to work correctly.\n \nClick Yes to continue or click No to exit Setup.
ERROR_UNINSTSETUP=unInstaller setup failed to initialize. You may not be able to uninstall this product.
PRODUCT_NAME=Diskeepe 5.0 95-98 Workstation
NO_NT=This version will not install on Windows NT. Setup will now exit.
INSTALL_LOCAL_ONLY=must be installed to a local drive. Please specify a local drive for installation of
FAILED_START_BROWSER=Setup was unable to start your Web Browser. To connect \nto the Internet Explorer web site, go to:\nhttp://www.microsoft.com/windows/ie/download/default.asp
NO_DCOM=Setup has found DCOM version
DISKEEPER_UP=Setup has found that MMC is currently running. \nDiskeeper runs an MMC snap-in. You must shut \ndown the MMC before proceeding with this setup . \n\nPlease shut down the MMC and then click OK.
SD_STR_20140=Setup does not find any local CD-ROM drives.
README=Readme.txt
INST_COMPLETE=Installation Complete.
NO_START_DCOM=Unable to start the DCOM installation program. \n\r You will need to install DCOM before running Diskeeper. \n\rYou can get this from the Microsoft web site. \n\rSetup will now Exit.
NT_SYSDRIVE_SPACE=1000
DK_SIZE_SYS=There are a few Diskeeper files that must \nbe installed to the system drive. There is \ncurrently not enough space on your system \ndrive to install these files. \n\nPlease free up some space on the system \ndrive and then run setup again.
UNABLE_GET_NTFS=Unable to get the File Sytem type.
