home *** CD-ROM | disk | FTP | other *** search
- % ------------
- % MAX-PROT.CTL
- % ------------
- %
- % This file is used to define external protocols usable with Max 2.0.
- % Both Opus-compatible and non-standard protocols can be used
- % directly by Maximus.
- %
- % If you're running 4DOS (or any other alternate shell), you
- % should replace all occurences of "command.com" with the name of
- % your shell (such as 4dos.com). Failure to do this may cause erratic
- % results when calling external protocols.
- %
- % If you would like to replace the Maximus INTERNAL Zmodem with the one
- % defined below, you will need to edit your batch file that calls Maximus
- % to add a command line parameter. -xz on the Maximus command line will
- % DISABLE the internal Max-Zmodem and allow you to use the letter "Z"
- % on the protocol screen for your own user-defined protocol driver. You
- % will then need to uncomment the section below pertaining to the Zmodem
- % protocol driver.
- %
- % This sample PROTOCOL.CTL file also defines a ZedZap (8K Zmodem), Ymodem-1K,
- % Ymodem-Batch and a Ymodem-G protocol selection entry.
- %
- % (Xmodem and Xmodem-1K are not supplied, as they are built into Maximus
- % and cannot be disabled).
- %
- % To include these external protocols in your Maximus setup, edit MAX.CTL
- % to include the line:
- %
- % Include "MAX-PROT.CTL"
- %
- % Then you should run SILT on your Maximus control file. Of course, you
- % can also import the pertinent sections of this file into an existing
- % PROTOCOL.CTL file.
- %
- % You should then make sure that CEXYZ.EXE is in a directory defined in your
- % DOS PATH. If you do not wish to place CEXYZ.EXE in your path, you will
- % need to place it into your \MAX installation directory. The sample batch
- % file (XYZBATCH.BAT) *shouldn't* need any editing. This file must be placed
- % in your \MAX BBS installation directory.
- %
- % Only uncomment this protocol definition if you are disabling Maximus's
- % internal Zmodem.
- % Protocol Zmodem
- % Type Batch
- % LogFile DSZ%K.Log
- % ControlFile DSZ%K.Ctl
- % DownloadCmd command.com /c xyzbatch DSZ%K.Log /P%P /B%W /sz @%x:DSZ%K.Ctl
- % UploadCmd command.com /c xyzbatch DSZ%K.Log /P%P /B%W /rz %v
- % DownloadString %s
- % UploadString
- % DownloadKeyword z
- % UploadKeyword Z
- % FilenameWord 10
- % DescriptWord 0
- % End Protocol
- %
- %
- Protocol 8K Zmodem (ZedZap)
- Type Batch
- LogFile DSZ%K.Log
- ControlFile DSZ%K.Ctl
- DownloadCmd command.com /c xyzbatch DSZ%K.Log /P%P /B%W /szap @%x:DSZ%K.Ctl
- UploadCmd command.com /c xyzbatch DSZ%K.Log /P%P /B%W /rzap %v
- DownloadString %s
- UploadString
- DownloadKeyword z
- UploadKeyword Z
- FilenameWord 10
- DescriptWord 0
- End Protocol
- %
- %
- Protocol Y Ymodem-Batch
- Type Batch
- LogFile DSZ%K.Log
- ControlFile DSZ%K.Ctl
- DownloadCmd command.com /c xyzbatch DSZ%K.Log /P%P /B%W /sy @%x:DSZ%K.Ctl
- UploadCmd command.com /c xyzbatch DSZ%K.Log /P%P /B%W /ry %v
- DownloadString %s
- UploadString
- DownloadKeyword S
- UploadKeyword R
- FilenameWord 10
- DescriptWord 0
- End Protocol
- %
- %
- Protocol G Ymodem-G
- Type Batch
- LogFile DSZ%K.Log
- ControlFile DSZ%K.Ctl
- DownloadCmd command.com /c xyzbatch DSZ%K.Log /P%P /B%W /syg @%x:DSZ%K.Ctl
- UploadCmd command.com /c xyzbatch DSZ%K.Log /P%P /B%W /ryg %v
- DownloadString %s
- UploadString
- DownloadKeyword S
- UploadKeyword R
- FilenameWord 10
- DescriptWord 0
- End Protocol
- %
- %
- Protocol K Ymodem-1K Batch
- Type Batch
- LogFile DSZ%K.Log
- ControlFile DSZ%K.Ctl
- DownloadCmd command.com /c xyzbatch DSZ%K.Log /P%P /B%W /sy1k @%x:DSZ%K.Ctl
- UploadCmd command.com /c xyzbatch DSZ%K.Log /P%P /B%W /ry1k %v
- DownloadString %s
- UploadString
- DownloadKeyword S
- UploadKeyword R
- FilenameWord 10
- DescriptWord 0
- End Protocol
- %
- %
- % Credit goes to Scott J. Dudley for the basis of this sample PROTOCOL.CTL
- % file.
- %
- % --- END SAMPLE MAX-PROT.CTL ---
-