home *** CD-ROM | disk | FTP | other *** search
-
-
-
-
-
-
-
-
-
-
-
- A N S I a r t i s t
- Version 2.5
-
- LATEST INFORMATION
- Copyright (c) 1991, 93 by dimas Software
- All rights reserved by Thomas Sauer and Dirk Focken
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- dimas Software
- Hauptstasse 49
- D-W6715 Lambsheim Germany, Europe
- Phone: GERMANY-06233-53972
- CompuServe: 100020,224
-
-
-
-
-
-
-
-
-
-
-
-
- 0. Table of Contents
- ===================================================================
-
- 1. Troubleshooting................................................3
- 2. System Requirements............................................3
- 3. Installation...................................................4
- 4. How to start...................................................4
- 5. File List......................................................4
- 6. How to register................................................4
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- ---------------------------------------------------------------------------
- Page 2 ANSIartist 2.5 - README.DOC
-
- 1. Troubleshootig
- ===================================================================
- If you have problems with ANSIartist or discovered serious bugs
- and you can't solve your problems with the included documentation
- files, contact dimas Software:
-
- * by mail:
-
- dimas Software Development
- Hauptstrasse 49
- D-W6715 Lambsheim
- GERMANY, Europe
-
- * by phone:
-
- GERMANY-06233-53972
- Please do only call between 4:00pm and 8:00pm (German time,
- of course!)
-
- * via our home BBS:
-
- Kurpfalz BBS
- SysOp: Alexander Vollmer
- GERMANY-6233-55087
- Supports: V32b V42b (24h!)
- FidoNet(tm) 2:247/202
- GlobalNet, VirNet, ANSInet, HEIMnet, WDNet
- Latest version frequable as Magic: ANSIARTIST
-
- * or by CIS mail:
-
- 100020,224 (user Alexander Vollmer)
- even valid for Internet 100020.224@compuserve.com
-
- Please don't forget to send us a list of all hardware you are
- using (computer model, available memory etc) and which SYS drivers
- are loaded in CONFIG.SYS and/or which TSRs you are using.
-
-
- 2. System Requirement
- ===================================================================
- * IBM compatible PC, XT, AT, 386 or higher
- * MS-DOS Version 3.0 or higher
- * approx. 512K RAM (min. 360K available)
- * any graphics adapter
- * keyboard
- * 1 floppy disk drive
-
- Not required, but recommended:
- * Microsoft compatible mouse (or trackball)
- * Hard Disk Drive
-
- >> Note: To load ANSI screens, the screen driver ANSI.SYS (came
- along MS-DOS) has to be loaded. To install it, insert the line
-
- DEVICE=[dir]\ANSI.SYS
- ---------------------------------------------------------------------------
- ANSIartist 2.5 - README.DOC Page 3
-
- into your CONFIG.SYS file.
- [dir] specifies the directory ANSI.SYS is hold in (e.g. C:\DOS).
- Refer to the MS-DOS User's Guide for detailed information.
-
-
- 3. Installation
- ===================================================================
- Just expand your ANSIartist archive and copy the files into a
- directory, preferably ARTIST - that's it!
-
-
- 4. How to start
- ===================================================================
- First, load the PACKAGE.LST file into any editor (or type README
- PACKAGE.LST and press ENTER; README.EXE came along ANSIartist) to
- read this file. Please compare the file list (and, if you want,
- the file sizes, too) with the files in your ANSIartist directory.
- If your package isn't complete, contact dimas Software (see
- chapter 1) and demand a complete package.
- If your package is complete, read the ARTIST.DOC file before you
- start using ANSIartist. If you want to print out this manual, use
- PRINTDOC.EXE which came along ANSIartist or any other tool.
-
-
- 4. File List
- ===================================================================
- To get a complete file list, refer to PACKAGE.LST (see chapter
- 4). Here's a list of all executable files of the ANSIartist
- package:
-
- Filename Descreption
- | ARTIST.EXE The main program.
- | PRINTDOC.EXE Utility to print out documentation files.
- | README.EXE Utility to view documentation files.
-
-
- 5. How to Register
- ===================================================================
- First, read ARTIST.DOC, chapter 2 tru 7 very carefully. Then,
- print out ORDER.FRM and mail it do dimas Software, or fill it out
- with any ASCII editor and send it to us via E-Mail. Then, PAY and
- wait on your ANSIartist! (We will inform you if your order has
- reached us.)
-
-
- Enjoy ANSIartist!
-
-
- This file was created in January 1993 by Thomas Sauer by using
- the Borland Pascal editor and a lot of our own text formatting
- tools.
-
- Copyright (C) 1992,93 by Thomas Sauer All rights reserved.
- ID1701931355AA25US
-
-
- ---------------------------------------------------------------------------
-