home *** CD-ROM | disk | FTP | other *** search
- 7-JAN 1993
- TIMS Working Demo V.R12.0
- -----------------------------------------
- The TIMS working demo is a full working version of TIMS. The only
- limitation is that a maximum of five entities can be queried for a
- summary report.
-
- The hardware and software requirements for the TIMS working version
- are:
-
- - AutoCAD R.12
- - 5mb available for the demonstration software
-
- You must install the software in order to use it. Log onto the
- drive on which the INSTALL.EXE program is located. Then type:
-
- INSTALL
-
- The install program will request the following information.
-
- 1. Source drive : A:
- 2. Target drive : C:
- 3. Path for AutoCAD : C:\ACAD12
- 4. Path for TIMS <C:\TIMS> :
-
- The source drive is the drive that contains that TIMS installation
- program and other files. If you are installing from a floppy diskette
- this drive letter is usually A: or B:. If you are installing from
- a CD drive, the drive letter may be S:, J:, or another letter name.
-
- Answer with the appropriate drive letters and directory paths. If
- you have difficulty installing the demonstration, please contact
- technical support at Object Graphics.
-
- Note: You must have AutoCAD Release 12 to use TIMS.
-
- After installing TIMS, type:
-
- TIMS
-
- at the DOS prompt. You will then enter AutoCAD.
-
- Open the drawing called TUTIM10E from the \TIMS\SAMPLES
- subdirectory. This drawing contains entities linked to external
- dBase and Lotus 123 databases. You can use TIMS to do queries and
- reports on the drawing by picking TIMSMENU from the AutoCAD screen
- menu. Printed tutorials are also available from Object Graphics at
- a nominal cost.
-
-
- For more information, please
- contact your TIMS dealer or:
-
- Object Graphics
- 400 Stierlin Road
- Mountain View, CA 94043
-
- Tel: (415) 968-1500
- Fax: (415) 968-1670